Wuxi Double Elephant Rubber & Plastics M Xsk-400 nakup rabljenega (89.860)

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), 1 Hydropneumatic Press Type STHP 60 kN Itjdpfx Agepn Unvefsl with Two-Hand Operation – Floor Model with and without Base The compact and user-friendly benchtop model features a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to five times. During the working stroke, the pressure intensifier supplies oil to the punching cylinder, resulting in a purely hydraulic punching stroke. The return stroke is performed directly using compressed air. The screw-in adapter for the piston rod of the working cylinder allows for the installation of special tool holders.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 235 mm, izvrtina vretena: 52 mm, premer struženja: 400 mm, višina središča: 200 mm, stružna dolžina: 1.000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with infinitely variable speed control in the PREMIUM CU series offer a wide range of features and accessories for customers from various industries. The PREMIUM CU series allows precise adjustment of cutting speed to material and turning diameter – especially beneficial for non-ferrous metals, plastics, and to achieve perfect surfaces on precision components and fits. Of particular note are the right/left control units attached to the tool slide, allowing easy switching between clockwise and counterclockwise spindle rotation. These replace the conventional change gears typically found on universal lathes. Efficient handling is provided by electromechanical spindle brakes for ultra-fast spindle stops. The leadscrews are equipped with overload protection. Performance data and specifications: - Distance between centers: 1000 mm - Center height: 200 mm - Swing over bed: 400 mm - Swing over carriage: 235 mm - Swing without gap bridge: 550 mm - Bed width: 320 mm - Cross slide travel: 235 mm - Top slide travel: 110 mm - Max. turning tool size: 25x25 mm - Chuck adaptation: DIN 55027 No. 6 - Spindle taper (main spindle): MK 6 mm - Spindle bore: 52 mm Speed ranges: 1st range, stepless: 18 – 98 rpm 2nd range, stepless: 48 – 265 rpm 3rd range, stepless: 3: 144 – 790 / 4: 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Itedpfxey Hlxfj Agfol Metric thread pitches (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill travel: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Overall length: 2350 mm Overall height: 1330 mm Weight: 1590 kg Standard equipment: - RÖHM three-jaw chuck - 5-piece quick-change tool holder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base frame / chip tray / splash wall - Tool kit / operating manual / CE PREMIUM CU Series standards: - Heavy-duty grey cast iron machine bed for excellent vibration damping - Removable gap bridge - Prism guides - Hardened and precision-ground spindle, high concentricity, adjustable precision bearings - Smooth-running spindle and feed gear with oil bath - Hardened and precision-ground gears made of chromium-nickel steel - Feed reverse mechanism - Covered trapezoidal-thread leadscrew, hardened and precision-ground - Tool slide with locknut - Precision-adjustable slideways - Robust tailstock with offset taper - Lathe accuracy according to DIN standards Including 3-axis digital position display The machine is available immediately in our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Stanje: rabljeno, Leto izdelave: 2003, Technical Details: Turning diameter: 640 / 400 mm Turning length: 1500 mm Control system: Siemens 840 D Powerline Travel distances turret No. 1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivel range milling spindle (B axis): ±120° interpolated Rapid traverse rates turret 1 (milling head) x/y/z: 40/24/60 m/min Milling spindle speed: 12,000 rpm Drive power - milling spindle: 12 / 23 kW Milling spindle torque: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool milling spindle: 1.6 s Spindle 1 speed: 4,000 rpm Spindle 1 power: 36/45 kW Spindle 1 torque: 730 Nm Spindle 1 max. bar diameter: 90 mm Spindle 2 speed: 4,000 rpm Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 mm c-axis: 0.001° Travel distance turret 2 x: 225 mm Travel distance turret 2 z: 1595 mm Speed driven tool turret 2: 4,000 rpm Iodoyv Dnkjpfx Agfetl Number of tools in turret 2: 12 VDI 40 High-pressure pump: 20 bar Total power requirement: 110 kVA Machine weight approx.: 24 t Space requirement approx.: 9.3 x 4.6 x 3.1 m Accessories: Chip conveyor Automatic door High-performance precision turning-milling center with 23 kW milling spindle (X / Y / Z / B axes), 120-position HSK-A 63 tool magazine and counter-spindle with tailstock function. Ideally suited for machining complex turned parts with off-center milling operations. Coolant system with 1000 l tank and 4 kW immersion cooler. Differential pressure clamping for main and counter spindle. Turret steady rest for diameters from 8–101 mm. Parts catcher for turret 2 with 3-jaw chuck up to Ø 140 mm for chucked parts. Conveyor belt for finished parts, ejection to the right out of the working area. Prepared for 3D probe. Artis tool monitoring system. Machine can be demonstrated under power.

Stanje: novo, Leto izdelave: 2025, Sliding table length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: handwheel Isdpoiv Hdvefx Agfetl Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Stanje: novo, Leto izdelave: 2018, Novi sistem za ekstruzijo R&B Plastics Machinery MAX 5 Robusten, namenski več-ekstrudijski sistem, izdelan podjetja R&B Plastics Machinery, sestavljen iz štirih ekstruderjev MAX 1-1/4" × 30:1, nameščenih nad enim glavnim ekstruderjem MAX 2" × 24:1, skupaj s posebno montažno konstrukcijo, napravami za dovajanje materiala, ogrevanimi adapterji/cevi in centraliziranim nadzornim sistemom Allen-Bradley PLC. Sistem je bil v celoti sestavljen, integriran, pregledan in pred odpošiljanjem preizkušen v obratu R&B v Saline, Michigan, in nikoli ni bil uporabljen v proizvodnji. Ekstruderji (4) R&B MAX 1-1/4" × 30:1 X102 ali ekvivalentne bimetalne obloge valja Zamenljivi vijaki za standardno količino iztisa Rossi reduktorji z visokotemperaturnimi tesnili Viton 5 KM motorji Marathon AC Štirje ogrevani/hlajeni pasovi valja Grelniki, ventilatorji za hitro kroženje zraka in dvojni termoelementi Rupturni diski in pretvorniki tlaka Sonde za merjenje temperature taline Watlow in grelni pasovi iz mike Posode iz nerjavečega jekla Nastavljivi dovodi materiala pod kotom 45° (1) Glavni ekstruder R&B MAX 2" × 24:1 Konfiguracija brez odzračevalnega sistema, hlajena z zrakom Vijak MAX IMPACT za visoko količino iztisa Stezne plošče Colmonoy 56 X102 ali ekvivalentni valj z bimetalno oblogo 25-30 KM motor Marathon Blue Max TEFC Rossi spiralni reduktor Največja hitrost vrtenja vijaka: 100 vrt/min Tri neodvisno nadzorovani pasovi za ogrevanje/hlajenje Pretvorniki temperature taline in tlaka Posoda iz nerjavečega jekla in hladilni sistem za dovod materiala Sistem za montažo več-ekstruderjev Zasnovan za 4 × 1-1/4" ekstruderje nad 1 × 2" glavnim ekstruderjem Robusten, varjen montažni okvir Posamezne nastavljive podpore in varnostne omejitve Posebna, podaljšana glavna osnova Dovajanje in prenos materiala Isdpfszz Thbox Agfetl (5) Samostojni vakuumske naprave Foremost B-6-2 (4) Ogrevani adapterji R&B (4) Ogrevane cevi, dolžine do 12 čevljev Nadzorni sistem R&B MAX PLC Allen-Bradley CompactLogix PLC 15" zaslon za upravljanje Allen-Bradley (4) 5 KM + (1) 25-30 KM pogoni z nastavljivo frekvenco Allen-Bradley (VFD) Nadzor ogrevanja/hlajenja ekstruderja preko PLC Klimatiziran glavni električni omarica Sistem za oddaljeni dostop EWON Integrirani nosilci za kable in električna distribucija Zasnovan za 380 V / 3 faze / 50 Hz Odprta električna shema, logika stroja in dokumentacija Stanje: NOVO / Nikoli uporabljeno Na voljo celotna dokumentacija in navodila za uporabo. Pomembne informacije o obsegu Kalupi/orodja za ekstruzijo in hladilna voda niso vključeni. Lastniška orodja za ekstruzijo (npr. za zadrge) in povezana lastniška komponenta niso vključeni. Električna omarica vsebuje priključke za dodatno opremo, vključno s priključki za hladilno vodo in navijalno napravo; teh priključkov ne smete razumeti kot vključitev te dodatne opreme v ponudbo sistema R&B. Oprema je shranjena in pripravljena za odpošiljanje. Na voljo je pregled.

Stanje: rabljeno, Leto izdelave: 1990, Saw blade diameter: 400 mm Cutting length: 400 mm Cutting diameter: 130 mm Speeds: 9.5 - 48 rpm Peripheral speed: 12 - 60 m/min Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 125 mm Cutting capacity at 90° rectangle: 400 x 125 mm Cutting capacity at 45° round: 130 mm Cutting capacity at 45° square: 110 mm Cutting capacity at 45° rectangle right: 200 x 125 mm Cutting capacity at 45° rectangle left: 280 x 125 mm Total power requirement: 4 kW Iedpfxjuia Hrj Agfotl Machine weight: approx. 1.5 t Space requirement: approx. 1.2 x 2.0 x 1.7 m

Stanje: rabljeno, Leto izdelave: 1987, Univerzalna CNC glodalica CNC MAHO MH 400 E Pomak X-osi: 400 mm Pomak Y-osi: 375 mm Pomak Z-osi: 250 mm Numeričko upravljanje: CNC PHILIPS 432 Radni stol: 700 x 270 mm Konus: SA40 Brzina vretena: od 80 do 4000 o/min Godina proizvodnje: 1987 Centralno podmazivanje Glava s ručnim zakretanjem Isporučuje se s dokumentacijom i parametrima stroja Napon: 380 V Širina: 2200 mm Duljina: 2000 mm Ukupna visina: 2000 mm Težina: cca 1,5 t Iodjzy Rrzjpfx Agfetl

Stanje: novo, Extraction capacity (filter unit at nozzle*): 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 68 dB(A) Dimensions L/W/H in mm: L 1290 / W 345 / H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages or colours available on request Application: Separation of emulsion mist, suitable for medium to very large machine workspaces. Your benefits with the COBARON series: - 15 device variants available - Direct from the manufacturer - ISI-TRONIC standard (digital filter control system) - Electronically controlled EC fan as standard Itedpfx Ajh Rfbqsgfel - Adjustable speed and air volume - Available with various filter configurations - High-quality filter media for pre-filter and main filter stages - Separation efficiencies up to 99.95% - Extensive range of mounting and connection accessories - Flexible adaptation to your application - Optimised service life - Quality Made in Germany With COBARON, we offer a filtration system that accommodates today’s wide range of machining processes and their respective contaminant profiles. Even within the standard range, the COBARON combination filter system offers various filter configurations and thus can be variably adapted to numerous applications. The different expansion stages of the COBARON series have been specifically developed for applications that are borderline cases for many filter systems (mechanical or electrostatic). Combining both proven filter principles in the appropriate application increases the effectiveness of air filtration and extends service intervals. COBARON can be operated as a purely mechanical filter device with various filter stages, or additionally configured with an electrostatic filter cell. Our filter units already come standard with digitalisation features and, for example, can be controlled via laptop.

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel Iedpfx Agouayymefotl T1SP 300x145x160 M1 EW20° 2GG by 3M Ceramic grinding wheels for gear flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling in accordance with module m, thread type gg, pressure angle EW Advantages: - Grinding burn risk approaches zero - Up to 50% reduced grinding times - Dressing effort reduced by half - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Leto izdelave: 1999, stanje: delavnici obnovljeno (rabljeno), The machine is currently undergoing refurbishment. PROCESSABLE MATERIALS Depending on material properties and sheet configuration: - Paper with a basis weight of at least 80 g/m² - Cardboard or solid board up to a basis weight of 2,000 g/m² and corrugated board up to a total thickness of 4 mm (maximum sheet curvature 4%) PERFORMANCE DATA Maximum sheet size: 820 x 1,130 mm Minimum sheet size: 350 x 400 mm Maximum cutting force: (400 t) 4.0 MN Maximum machine speed: 9,000 sheets/hour Basic equipment of the machine: Feeder High-performance non-stop sheet feeder W3 equipped with: Ijdpfxsyuuzdj Agfstl • Automatic non-stop device • Automatic pallet change system • A suction head • Double sheet detector • Motorized pile side lay adjustment • Motorized suction head adjustment • Belt table with pneumatic cover frame • Compressed air and vacuum pump Register table • Operator side side lay, can be switched between pull or push mode • Light sensor for precise sheet side alignment detection • Fine adjustment of side lay • Two active front lays with light barrier for register control • Two inactive front lays for stabilization of sheet registration • Separate fine adjustment of the gripper margin for drive and operator side • LED display for correct front and side lay registration • Arrival trend display for sheet feed • Miss sheet rejection which disables only the feeder • Height-adjustable top lay for precise sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guidance for the cutting plate on swing-out carrier arms • Motorized adjustment of die-cutting pressure • Automatic device for raising the chase to the platen • Electronic cutting force display with maximum pressure limitation • Vacuum unit under the table for thin die-cutting plates Stripping section • Frame drive and frame lift for the upper tool frame • Stripping board holder with Centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery section • Fully automatic package stacking device, pre-selectable • Counted part piles by automatic insertion of uncut sheets • Can form sheet bundles (interleaving sheet weight min. 250 g/m², max. 800 g/m²) • Frame lift for the upper tool frame • Holder for change frames with motorized adjustment in running direction • Pneumatic frame locking • Selectable gripper opener cam and sheet pusher • Sheet alignment device • Integrated conveyor belt for removing gripper edges or waste grid (double cut) • Separator sheet magazine with electronic level control, refillable from the B-side during production • Tool frame with Centerline • Change frames for standard sheet delivery / gripper edge removal • Change frames for stripping grid • Mounting kit for separator punch • 8 x sheet hold-downs for standard sheet delivery • 4 x cross support rods Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control system retrofit to latest Siemens S7 controller • New generation frequency inverters • Modem for remote service connectivity • Machine height extension: 900 mm

Stanje: dober (rabljeno), Leto izdelave: 1993, TRENNJÄGER kovinska krožna žaga z možnostjo poševnega reza Z vzdolžnim prislonom! Premer žaginega lista: 400 mm Dolžina reza: 400 mm Premer reza: 130 mm Itjdjx U Dl Tjpfx Agfjl Leto izdelave: 1993 380 V Moč: 4,5 kW

Leto izdelave: 2019, stanje: rabljeno, Lemorau MEBR+ je digitalni stroj za obdelavo materiala, zasnovan na modularnem konceptu, kar omogoča dodajanje modulov glede na potrebe stranke. MEBR+ deluje v načinu polne rotacije in načinu polovične rotacije. Način polovične rotacije je primeren za manjše tiraze, način polne rotacije pa za večje tiraze pri visoki hitrosti. Zahvaljujoč najsodobnejši servotehnologiji se ohranja toleranca natančnosti med fazami pospeševanja in zaviranja, pa tudi med celotnim proizvodnim časom. Lemorau MEBR+ je opremljen s servovodenim kompenzacijskim sistemom, ki zagotavlja odlično regulacijo napetosti materiala, ko stroj deluje v polovičnem rotacijskem načinu. Standardna oprema: - Največja rotacijska hitrost 200 m/min (656 ft/min) – osnovni material za etikete - Največja rotacijska hitrost 120 m/min (394 ft/min) – natančno izsekanje - Največja hitrost polovične rotacije 40 m/min (131 ft/min), odvisno od velikosti plošče – natančno izsekanje - Širina materiala 250, 330, 400 mm (10, 13, 16 palcev) - Elektronski števec (števec etiket/metrov/zvitkov ter skupni števec za metre in etikete) - Nastavljiva spojna miza s pnevmatičnimi objemkami - Elektronski sistem vodenja materiala z ultrazvočnim senzorjem za vodenje neprosojnih in prosojnih materialov - Samodejna regulacija napetosti materiala prek servomotorjev – konstantna in padajoča napetost - Pomnilnik za 250 opravil za enostavno in hitro nastavitev opravil - 6 kompletov okroglih nožev s stransko nastavitev - 2 zamenljiva pnevmatična navijalca s premerom 25, 40 in 76 mm (1, 1,5, 3 palcev) - Zaznavanje pretrganega papirja in matriksa - Navijanje ob vnosu/iznosu etiket - Oddaljena podpora prek internetne povezave - Samodejni postanek ob koncu glavnega zvitka s programirljivo funkcijo konca zvitka - Polavtomatično navijanje - Noga za korakno preklapljanje stroja - Večjezični zaslon na dotik - Razdalja med ponovitvami pri izsekanju 203,20 – 431,80 mm (8 – 17 palcev) – način rotacije - Razdalja med ponovitvami pri izsekanju 41,30 – 371,00 mm (1,6 – 14,6 palcev) – način polovične rotacije - Največji premer navitega zvitka: 600 mm (23,7 palcev) pri 1 valu / 350 mm (13,8 palcev) pri 2 valjih - Največji premer odvitega zvitka: 700 mm (27,5 palcev) - Potrdilo o skladnosti s standardom CE Dodatna oprema: 1 antistatična palica 1 senzor „Clear-on-Clear“ 1 obdelava s korono 1 paket za visoke hitrosti (80 m/min v načinu polovične rotacije) 1 revolverski navijalec Itedpfxozqnxto Agfel 2 flexo enote za nanos laka na določena mesta z rotacijskim registrom 1 čistilec materiala QRC (Quick Remote Connection) 1 nova matrica za izsekanje z dolžinami ponavljanja 41,30 – 371,00 mm (1,6 – 14,6 palcev) – način polovične rotacije približno 700 listov matrice Po želji, proti doplačilu, je na voljo sistem za sesanje MAHO za odsesavanje odrezanih robov!

Stanje: zelo dobro (rabljeno), Krmilnik strojnega varilca Miyachi Unitek HF25, sistem za točkovno varjenje z enosmernim tokom (DC). Naprava je popolnoma delujoča, pravilno se vklopi, zaslon deluje in vse funkcije se odzivajo pravilno. Na zaslonu je prikazano sporočilo »EMERGENCY STOP – OPERATOR ACTIVATED«, kar pomeni, da je aktiviran krog za izredno ustavitev – to ni okvara naprave. Model je namenjen natančnemu nadzoru procesa točkovnega varjenja z enosmernim tokom (DC). Opremljen je s preglednim zaslonom, numerično tipkovnico, možnostjo programiranja parametrov varjenja ter komunikacijskimi vmesniki RS-232 in RS-485. Napajanje 380–400 V AC, 50/60 Hz. Tehnični podatki: Proizvajalec: Miyachi Unitek Model: HF25 Tip: DC Resistance Welding System Napajanje: 380–400 V AC, 50/60 Hz Maks. izhodni tok: 2400 A RMS Iodpfx Agszma Sdsfotl Maks. napetost brez obremenitve: 10 V Vmesniki: RS-232, RS-485 Vhodni priključki, vključno z: stopalko, ventilom za zrak, senzorjem napetosti, varilno glavo Stanje: Popolnoma delujoča. Vizualno stanje je v skladu s slikami – normalne sledi uporabe. Napajalni kabel je bil popravljen (izolirano mesto je vidno na slikah). Popravek ne vpliva na delovanje naprave, vendar je ta informacija navedena zaradi popolne transparentnosti prodaje.

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.25 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specified module m, tooth flank quality gg, pressure angle EW Advantages: Itjdpouayyyofx Agfel - Grinding burn risk virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by half - Double the grinding wheel service life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M 1.5 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profiling according to specified module m, tooth system gg, pressure angle EW Iodpfxjuayy Hs Agfetl Advantages: - Grinding burn risk reduced to nearly zero - Up to 50% shorter grinding times - Dressing effort reduced by 2x - Double the grinding wheel tool life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300 x 145 x 160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Profiling according to module m, number of starts gg, pressure angle EW Advantages: - Near-zero risk of grinding burn - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the grinding wheel lifetime - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools Iedpfxjuayy Te Agfetl

Stanje: rabljeno, Uporabljen filter preša SCHENK iz nerjaveče jekla z polipropilenskimi ploščami. Proizvajalec: SCHENK, Nemčija Površina filtracije: 4,3 m² Plošče: (29) polipropilenskih plošč in (2) končnih plošč Iodpfx Aszun D Rogfetl Dobava v zaprti embalaži in ročno zapiranje.

Stanje: zelo dobro (rabljeno), Prodam motorno reduktor Lenze GSN04-1NHAR s trifaznim motorjem Lenze/WEG DERA071-32, moči 0,37 kW. Naprava je v 100-odstotno delovnem stanju, preizkušena in pripravljena za uporabo. Tehnično stanje je zelo dobro. Vizualno ima normalne znake uporabe, ki izhajajo iz delovanja, kar je razvidno iz fotografij. Zaradi kompaktne konstrukcije in spiralnega prenosa je motorno reduktor idealen za pogon tekočih trakov, podajalnikov, proizvodnih strojev, pakirnih strojev, mešalnikov in številnih drugih industrijskih naprav. Tehnični podatki: Proizvajalec reduktorja: Lenze Model reduktorja: GSN04-1NHAR Itodoznclcopfx Agfol Proizvajalec motorja: Lenze / WEG Tip motorja: DERA071-32 Moč: 0,37 kW Napajanje: 3×220–240/380–415 V AC Frekvenca: 50 Hz Hitrost motorja: 1370 vrt/min Izhodna hitrost: 133 vrt/min Navor: 22,6 Nm Prestavno razmerje: i = 10 Stopnja zaščite: IP55 Razred izolacije: F Način delovanja: S1 Stanje: 100-odstotno delujoče – preizkušeno. Normalni znaki uporabe, vidni na ohišju. Prodaja se natančno v stanju, kot je prikazano na fotografijah.

Stanje: rabljeno, Leto izdelave: 1996, Swing diameter: 400 mm Turning length: 915 mm Control: NUM Type 1062 T Total connected load: 12.5 kW Machine weight approx.: 5,500 kg Required space approx.: m Ijdet Hw Szjpfx Agfstl SOMAB (France) Cycle-Controlled Universal Lathe Model: UNIMAB 400 Year of manufacture: 1996 (Serial Numbers: 52 468 and 52 469) Year of manufacture: 1998 (Serial Numbers: 52 501 and 52 502) Center height: approx. 200 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 220 mm Cross slide / top slide travel: 235 mm Max. turning length with chuck / longitudinal slide travel: 890 / 915 mm Spindle bore: 52 mm Infinitely variable spindle speeds: 60 – 3,000 rpm Longitudinal and face feeds / rapid traverse, stepless up to max.: 15 m/min. Max. feed force longitudinal/face: 900 daN Max. workpiece weight between centers / with tailstock: 250 kg Thread pitches: 0.1 – 400 mm/pitch Spindle drive: 9/12.5 kW Total drive approx.: 22 kW - 400 V - 50 Hz Weight approx.: 5,500 kg Accessories / Special Equipment • NUM 2-axis cycle control Type 1062 T / SOMAB PL + S3 with direct input of all turning parameters using interactive user interfaces and corresponding software, control and monitor integrated into the sliding door, with software for free contour programming and tool change stop input • Cross slide equipped with MULTIFIX tool post head Type BD and 4 various Multifix tool holders • Axes can be controlled manually via handwheels and joystick • Manual 3-jaw chuck FORKHARDT F 250 fitted (52 468 and 52 469) or ROTO-S plus 250-62 (52 501 and 52 502) • Manual tailstock (MT 4) with quill, central lubrication, extendable coolant system, 2 sliding doors, misc. Condition: Very good – demonstration-ready under power, compact and robust machine Ideal for training, toolmaking, and mechanical engineering! Delivery: ex stock – as inspected Payment: strictly net upon collection – after invoice receipt

Stanje: novo, Leto izdelave: 2005, Stroj za rezkanje z napravo za podajanje EM 11 Iodpfxozvvuae Agfstl s 5. vretenom na spodnji strani priloženo je 5 rezalnih glav.

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension Itsdpszlbq Sjfx Agfsl - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, Os X: 400 mm Os Y: 240 mm Os Z: 350 mm Število vrtljajev vretena: 42.000 vrt/min Vpenjalna glava orodja: HSK-E40 Sistem palet UPC: 320 x 320 mm Krmilnik: HEIDENHAIN TNC 430 M Itodpeznk Rysfx Agfol Stroj ni pripravljen za uporabo, vreteno je treba zamenjati.

Stanje: novo, Extraction capacity at nozzle* (filtration unit): 2050 m³/h Total power consumption*: 1.04 kW Rated voltage: 400 V, 50/60 Hz, 3Ph+PE Sound level*: 69 dB(A) Dimensions L/W/H in mm: L 1290 / W 588 / H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages or custom colours available on request Intended use: Separation of emulsion mist, designed for medium to very large machine workspaces. Your advantages with the COBARON series: - 15 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available with a wide range of filter configurations - High-quality filter media for pre- and main filtration - Separation efficiency up to 99.95% - Comprehensive range of installation and connection accessories - Flexible adaptation to the specific application - Optimised service life - Quality made in Germany With COBARON, we offer a filtration system that meets the diverse requirements of today's machining processes and the resulting pollutant profiles. Even the standard COBARON combination filter system offers different options in filter configuration, making it variably adaptable for numerous applications. Itedpfxoh Rfbxj Agfol The various COBARON models have been specifically developed for applications that pose boundary challenges for many filtration systems (mechanical or electrostatic). The combination of both proven filter principles, applied as suited to the particular application, enhances air filter performance and extends service life. COBARON can be operated as a purely mechanical filtration unit with various filter stages or optionally equipped with an electrostatic filter cell. Our filtration units are already digitalised as standard and can, for example, be controlled via laptop.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Največja debelina plošče: 60 mm Agregat za obdelavo robov Agregat za lepljenje z rezervoarjem za lepilo Ijdpsyziutjfx Agfstl Agregat za obrezovanje robov Agregat za zaobljanje Agregat za čiščenje robov in nanos lepila Agregat s čopiči Nadzorni sistem »StarTouch« namesto sistema Orion 110 Obdelanih samo 30.217 metrov robov (statistika z dne 12. 3. 2026) 4482 ur

Stanje: rabljeno, Leto izdelave: 2023, ---- Nova oprema 3 kosi na zalogi v Welzowu Lissmac minikran LMK 400 TFE Št. opreme: 100569140 Letnik: 2023 Cena: 15.930,00 € neto Lissmac minikran LMK 400 TFE Št. opreme: 100569141 Letnik: 2023 Itsdszkz Dcjpfx Agfol Cena: 15.930,00 € neto Podatki: Nosilnost pri 5-metrskem iztegu: 400 kg Izteg: 5000 mm Višina kavlja: 4500–6000 mm Teža brez balasta: 991 kg Balast: 1070 kg Medosna razdalja: 2000/2000 mm Polmer obračanja: 1500 mm Maksimalni tlak na kolo: 14 kN Hitrost dviganja: 2–8 m/min