Willibald Mza 4300 / Hächsler / Shredder nakup rabljenega (1.274)

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM),

Stanje: dober (rabljeno), Leto izdelave: 1991, moč: 22 kW (29,91 KM), suitable for pallets or other residual material grab width = working width 98 cm 22 kW motor with discharge auger Klsdpot Tvk Aefx Al Nsr

Stanje: dober (rabljeno), Leto izdelave: 1992, Chipper with hydraulic moving floor Kedpfxswv Hmvs Al Nslr Rotor width: 700 mm Motor: 11 kW Screen: 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, moč: 37 kW (50,31 KM), skupna masa: 5.200 kg, large chopper, ideal for pallets or similar material built like a tank, weighs 5 tons rotor width 1300 mm motor 37 kW Kljdpfsu Apkijx Al Nsr feed stroke up to approx. 1.3 m to rotor with discharge auger

Stanje: dober (rabljeno), Leto izdelave: 1994, moč: 30 kW (40,79 KM), Bobnarski drobilnik z ležečim dovodom maks. širina dovoda 300 mm Kedpfx Aou Ezp Aol Njlr maks. višina dovoda 85 mm motor 18,5 kW novo ležaje rotorja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Drogalnik v obnovljenem stanju. Počasni stroj s premičnim dnom. Širina rotorja 800 mm, velik premer rotorja 368 mm z 40 noži. Motor 22 kW. Kedpex Dqz Rsfx Al Njlr Naslednji deli so bili zamenjani: Ležaji rotorja Ležaji menjalnika Olje v menjalniku Noži so bili obrnjeni Sito 20/25 mm Klinasti jermen

Leto izdelave: 1995, stanje: dober (rabljeno), Rotor width 600 mm 7.5 kW motor Kodpfx Aljfxg Dlo Nolr 650 rpm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, močan sekljalnik ali drobilnik z motorjem 45 kW, primeren tudi za plastiko širina rotorja: 1000 mm premer rotorja: 360 mm približno 50-60 nožev na rotorju Dvigalni transportni trak z magnetnim valjem je mogoče kupiti posebej Kljdew Tdudopfx Al Ner

Stanje: dober (rabljeno), Leto izdelave: 1995, Seckalnik s ležečim dovodom preko vibrirnega kanala Motor 30 kW maks. vhodna širina 320 mm Klsdpfx Aexc H Rlel Njr maks. vhodna višina 80 mm z transportnim trakom

Stanje: dober (rabljeno), Leto izdelave: 1993, Rotor width 800 mm 22 kW motor Kljdpfxep H Sv Ds Al Nor 20 knives on rotor, 25 mm concave A wooden frame is also included to raise the chipper, allowing a conveyor belt to fit underneath.

Stanje: dober (rabljeno), Leto izdelave: 1998, Počasni stroj z hidravlično premično dno Širina rotorja 1000 mm – idealno za palete Premer rotorja 300 mm z 24 noži Motor 22 kW Kedpox Dq Abefx Al Nelr z iztikalnim polžem Velikost sita: 25 mm

Stanje: novo, Leto izdelave: 2023, INDIVIDUAL – ADAPTABLE – DESIGNED TO MEET YOUR REQUIREMENTS The KS 1000/2 twin-shaft shredder is a powerful reduction machine, featuring a completely machined, solid grinding chamber. It is assembled from four interlocking and bolted components, ensuring outstanding stability and exceptional maintenance accessibility. The machine is powered by two high-performance electric motors, which drive two counter-rotating hexagonal shafts via heavy-duty, high-quality planetary gearboxes. The hexagonal shafts can be equipped with custom-manufactured cutting discs in various thicknesses. The grinding chamber of the KS 1000/2 is double-protected by wear plates and wear rings for complete armoring against abrasion. Technical Specifications: Cutting chamber: 1000x600 mm Drive: 2 x 15 kW electric motors Shaft speed: 16.5 rpm per shaft Advantage: Constant torque on both shafts due to two-motor drive system. Cutter width: 19 mm, 9 mm & other widths available upon request! Weight: approx. 3.5 tons Optional Equipment: Custom-designed special frame Ksdpfx Aloft U Saj Nolr Custom-designed special hopper Various drive powers available Multiple rotation speeds available

Stanje: novo, Leto izdelave: 2023, INDIVIDUAL – ADAPTABLE – DESIGNED TO MEET YOUR REQUIREMENTS The KS 1000/2 twin-shaft shredder is a powerful reduction machine, featuring a completely machined, solid grinding chamber. It is assembled from four interlocking and bolted components, ensuring outstanding stability and exceptional maintenance accessibility. The machine is powered by two high-performance electric motors, which drive two counter-rotating hexagonal shafts via heavy-duty, high-quality planetary gearboxes. The hexagonal shafts can be equipped with custom-manufactured cutting discs in various thicknesses. The grinding chamber of the KS 1000/2 is double-protected by wear plates and wear rings for complete armoring against abrasion. Technical Specifications: Cutting chamber: 1000x600 mm Drive: 2 x 15 kW electric motors Shaft speed: 16.5 rpm per shaft Advantage: Constant torque on both shafts due to two-motor drive system. Cutter width: 19 mm, 9 mm & other widths available upon request! Weight: approx. 3.5 tons Optional Equipment: Custom-designed special frame Custom-designed special hopper Kjdpfxjd Sblmo Al Nelr Various drive powers available Multiple rotation speeds available

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, moč: 30 kW (40,79 KM), širina rotorja: 1.000 mm, Dvoosni drobilnik KS-1000/2 Odlično stanje približno 450 delovnih ur. Noži rotorja so zaradi vlažnega materiala rahlo zarjaveli, vendar je stanje še vedno zelo dobro! Prenovljeno stanje: – Nova barva Vključno z elektro omaro, okvirjem in lijakom Klodpfx Alsyrfgro Ner

Stanje: novo, Leto izdelave: 2025, Features: Ksdew Elbdopfx Al Nolr - Overband neodymium magnetic separator - HP - Dust suppression - Belt speed control - Self-propelled drive for semi-trailer

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 44.000 kg, dolžina rotorja: 2.800 mm, moč: 315 kW (428,28 KM), največja hitrost vrtenja: 87 obr/min, - MERAK 2800-2 with 315 kW - 116PR cutting system - PG190 screen (can be changed according to customer requirements) - Feed hopper - Dust suppression - Electric central lubrication - Hydraulic circuit protection - Overband neodymium magnetic separator – HP Kedpfx Aeugf Dwjl Njlr - Rubberized, bolted track pads on crawler chassis

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, Features: - Cutting unit - Side wall extension of cutting chamber +300mm (one-piece) - Flat bottom plate on crawler chassis - Dust suppression - Engine compartment fire extinguishing system Kedpfx Alew Elm Te Nolr

Stanje: rabljeno, številka stroja/vozila: 13210, Premer rotorja: 750 mm Klodpfx Asy Di R Tel Ner Širina rotorja: 1500 mm Rezila rotorja: 76 Rezila statorja: 4 (1 vrsta) Vhodni presek cca 1500 x 1500 mm Pogonski motor: 2 x 75 kW Prikazane fotografije ne ustrezajo dejanskemu stanju stroja!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 60.159 h, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is ideal for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase a hydraulic Krauss Maffei 500-4300 CX injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear tie-bar spacing: H 900 mm / V 800 mm • Locating ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar Kodpfxsyg Hz Hj Al Nelr • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump output / heating capacity: 90 kW / 44 kW • Miscellaneous • Max. crane load: 10 tonnes • 2K-capable: no • Filter nozzle/granulator: no • Standard fully hydraulic 2-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 6.777 h, Funkcionalnost: popolnoma funkcionalen, Base version DW 3060-F "Büffel" (Carrier machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Permissible total weight 25,000 kg Tires: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Klodjxx Tfzjpfx Al Nsr Reinforced planetary gearbox 380 kW Auxiliary hydraulic connection 20 l/min Hydraulic preparation for travel drive Fuel tank 2 x 300 liters Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electro-control Reversal of the drum via electric motor when the main engine is off Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Shredding system SIZE "L" 600/4 complete Additional hydraulic connection 70 l/min Radio remote control Comb extension Size "L" Limiter Mounting for comb extension Limiter Size "L" Overbelt magnet for rear conveyor Frame for overbelt magnet Moistening system

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 10.400 h, Equipment: Basic version DW 3060-F “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system including ABS and lighting according to EC directive 50 mm EC towing eye incl. bolt-on shoe Hydraulically adjustable support leg Splash protection (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, meets EUROMOT IV emissions standard Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: Belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: Belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubricating strips 24 V electrical control Kledpoyu Srmefx Al Ner Roller reversal with electric motor when engine is stationary Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydraulic drive system Radio remote control Receptacle for comb extension Limiter Size “L” Comb extension Size “L” Limiter Moistening device Hopper extension plates, plug-in on both sides Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 6.725 h, Equipment: Basic Version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. interchangeable shoe Hydraulically adjustable support leg Kodpjy D Nicjfx Al Nslr Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive mechanism Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with antimagnetic midsection Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged wear strips 24 V electric control system Reversing roller using electric motor when engine is stopped automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydraulic drive system Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening device Delivery date by arrangement

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-Shredder PMG-H 900 – immediately available – as new For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation unit • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed at a customer's site, tested, and subsequently properly dismantled. Due to a project change, the plant is now being offered. Condition: nearly new (test operation only) Availability: immediately from stock – no lead time Price: attractive cost-saving compared to new equipment — Special advantages: • Immediately available – no months-long lead times as with new machines • Only used for test runs – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required. The system includes: • Granulator (cutting mill) • Zig-zag separator • Turbine for fine grinding • Dry separation table Material purity up to 99%. In combination with the PMG-H 900 pre-shredder, this produces a powerful recycling line for industrial applications. — Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminium cables — Technical data Pre-Shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Kledpfx Aljy Ahlys Ner Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The system is available at short notice. Subject to prior sale. Viewing possible by arrangement.

Stanje: rabljeno, Infeed: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Kjdpfx Asy At E Sol Nslr Rotor diameter: approx. 560 mm

Stanje: rabljeno, Twin-shaft shredder Drive power: 37.50 kW Klodpjy At E Eefx Al Njr