Hacker, drobilnik – obnovljen

Votecs 800 S

Stanje: dober (rabljeno), Leto izdelave: 2006, Počasni drobilnik z velikim rotorjem, 40 nožev na rotorju. Širina rotorja 800 mm, premer rotorja 368 mm. Motor 22 kW. Naslednji deli so bili obnovljeni: ležaji rotorja, vsi ležaji v menjalniku, novo sito z odprtinami 25 / 20, noži, klinasti jermeni. Cedexqq A Ispfx Afqjhf

Stanje: rabljeno, skupna masa: 24.000 kg, premer rotorja: 640 mm, število rezil: 114, dolžina rotorja: 2.500 mm, moč: 247 kW (335,83 KM), No. 10023 Single-Shaft Shredder Vecoplan VAZ 2500 Used, year of manufacture approx. 2006 Fully overhauled in 2022 Approx. 700 operating hours since overhaul Areas of application: waste wood, scrap wood, packaging materials, film, plastic, paper, textiles, municipal waste, commercial waste, bulk production waste, baled production waste 247 kW Rotor length: 2500 mm Chedswh T N Uepfx Afqjf Rotor diameter: 640 mm 114 pieces of 60x60 mm square knives, 4 rows Shredding size selectable from approx. 10 – 250 mm Screen basket: 50 mm Throughput capacity: up to 25 tonnes per hour / throughput for waste wood approx. 30 tonnes per hour Material feed via hydraulic pusher Scope of delivery: machine, hopper, control cabinet, cooler Mechanisation optionally available Transport dimensions (LxWxH) approx. 4750 x 4640 x 2340 mm Weight approx. 24,000 kg Sale on behalf of a customer, ex site near 85456 Wartenberg, without dismantling, transport or installation Errors in description and price excepted Dismantling, transport, and loading by us available as an option To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus legal VAT, payment before collection or shipment Delivery terms: ex site

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WKZ45-1030, CLEARANCE SALE, EX-STOCK MACHINE! We cordially invite you to visit our technical center to personally verify the quality and functionality of our equipment. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta starter, automatic shut-off during idle - Hydraulic ram equipped with pressure plates - Siemens PLC control system - Optionally available with control cabinet extension for discharge conveyor belt + overband magnetic separator Csdpfxev Tdq Is Afqehf Complete solution with discharge conveyor belt in any configuration. Our core competence is delivering exactly what the customer truly needs. We work closely with our customers to develop tailor-made, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge conveyors, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filter systems All prices are net, plus 19% VAT. All information subject to change, while stocks last!

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Chedpfxjt Hw Iie Afqjf Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Glavna motorja: 2 x 7,5 kW Chjdpfx Afoxyhz Toqsf Pogonski motor z reduktorjem: 0,75 kW Maks. delovna širina: 500 mm Maks. robilna debelina: 80 mm Min. robilna debelina: 7 mm Min. dolžina deske: 800 mm Teža: ca. 1700 kg Dovajalna miza 3 m + 2 m Brezstopenjski podajalni pogon, vzdolžna vlečna veriga in zgornji pritisni valji, hidravlična črpalka, mehanska samoregulacija zgornjih pritisnih valjev glede na debelino deske, 2 žagalni glavi, ki se lahko premikata ločeno ali sinhrono, 2 laserja za lažje pozicioniranje žagalnih glav, elektronsko krmiljenje Unitronic s programom Mebor, razna dodatna oprema (glava za letvice, žagine liste, ...).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Vecoplan VAZ 1300 Shredder Chodpfxswu Nwhe Afqof Hopper inlet: 2.26 m x 1.65 m

Stanje: novo, Leto izdelave: 2025, Drum Chipper Series ATH 300 S&F chippers and drum chippers with horizontal feed are used in many sectors of the wood processing industry (sawmills, wood factories). Chippers of the "ATH" series produce high-quality, homogeneous wood chips with a low proportion of fines from residual wood, e.g. as premium wood chips for the pulp industry or as fuel chips for energy generation. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 70 cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Feed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, feeding Advantages: - Maximum throughput Csdpfxeuz Hmxj Afqjhf - Low proportion of fines - Low maintenance - Versatile applications - Custom manufacture Do you need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Stanje: rabljeno, Weinig Unimat 23 Technical data Chjdjncc Igopfx Afqsf Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Codeu Damdopfx Afqjhf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, vrsta nastavitve višine: hidravlični, Technical Description – PAUL KME-750-L Double Edger (Year of Manufacture: 2012) The machine offered is a double edger of the type PAUL KME-750-L, manufactured in 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of timber in industrial applications. Technical Specifications: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Fusing: 80 A • Control voltage: 24 V DC Saw Technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Feed rollers for easy material infeed Cjdpfxsxpua Us Afqshf • Integrated straightness sensors for automatic alignment • Lath bushing • Chip chutes • Outfeed table for organized material removal This high-quality machine from PAUL is designed for continuous use in industrial timber processing and is equipped with practical additional features to enable an efficient workflow.