Vpenjalni Material 3R Za Stroje Za Erodiranje nakup rabljenega (100.253)

Stanje: kot nova (razstavni stroj), Poddajna miza za stroje serije LT. Laedpfx Aezn Iu Noc Usf Dolžina: 1,8 m. Višina: 765 cm. Širina: 638 cm.

Stanje: kot nova (razstavni stroj), Pripravljalna miza za stroje serije LT, z bočno pločevino. Ledpfx Aszn It Esc Usaf Dolžina 1,8 m, s pločevino dolžine 2,5 m. Širina 627 cm. Višina 754 cm.

Stanje: rabljeno, Leto izdelave: 2026, Mobilna podlaga za stroje M900 je inovativna rešitev za industrijsko okolje. Gre za prenosno in enostavno za uporabo podlago, ki omogoča varno in stabilno namestitev različnih vrst strojev in naprav. Zaradi svoje konstrukcije in visokokakovostnih materialov je mobilna podlaga za stroje M900 zelo vzdržljiva in odporna na poškodbe. Lastnosti izdelka: Ta podlaga je zasnovana tako, da zagotavlja polno funkcionalnost in udobje pri delu. Ima nastavljive dimenzije, od 620x485 mm do 870x735 mm, nosilnost platforme do 300 kg in težo same podlage 10 kg, kar omogoča prilagoditev različnim vrstam strojev. Poleg tega njeno stabilnost in varnost povečujejo oporne noge z elastično blazinico, ki ščiti stroje pred vibracijami. Mobilna podlaga za stroje M900 je idealna za podjetja, ki potrebujejo enostaven in varen način za transport strojev in naprav na različne lokacije. S tem izdelkom lahko podjetje prihrani čas in stroške, povezane s premikanjem in namestitvijo strojev. Laedpfx Ajzpx Hloc Uof Povzetek: Mobilna podlaga za stroje M900 je zanesljiva in funkcionalna rešitev za industrijo, ki zagotavlja varnost, udobje in prihranek časa in stroškov. Zahvaljujoč nastavljivim dimenzijam od 620x485 mm do 870x735 mm, nosilnosti platforme do 300 kg in teži same podlage 10 kg, je ta podlaga zelo prilagodljiva in se prilagodi potrebam različnih vrst strojev, hkrati pa zagotavlja visoko vzdržljivost in varnost. Tehnični parametri M900 Obseg nastavitve: minimum: 620 x 485 mm maksimum: 870 x 735 mm Maksimalne dimenzije: 1150x990x130 mm (z zaprto zaponko) Nosilnost: 300 kg Teža: 10 kg * Slika stroja je samo ilustrativna. OPOMBA!!! IZDELEK JE VRNJEN, IMA SLEDI UPORABE. BREZ GARANCIJE!

Stanje: novo, Leto izdelave: 2026, Lastnosti izdelka: Lsdpevxtt Nsfx Ac Ueaf Osnova M700 ponuja širok nabor nastavitev, od 425 x 425 mm do 630 x 630 mm, kar omogoča prilagoditev dimenzijam stroja, s katerim uporabnik dela. Izdelana je iz trpežnih materialov, kar zagotavlja vzdržljivost in varnost med delom s stroji. Mobilna osnova za stroje M700 ima nosilnost 410 kg, zaradi česar je idealna rešitev za strokovnjake, ki potrebujejo veliko nosilnost osnove za različne stroje. Poleg tega osnova tehta le 12 kg, kar olajša njeno prenašanje. Zaradi svoje funkcionalnosti in učinkovitosti je mobilna osnova za stroje M700 idealna rešitev za strokovnjake v industrijski, gradbeni ali predelovalni industriji. Je praktična in vzdržljiva rešitev, ki omogoča varno in učinkovito delo z različnimi stroji. Tehnične specifikacije M700: Obseg nastavitev: minimum – 425 x 425 mm maksimum – 630 x 630 mm Nosilnost 410 kg Teža 12 kg * Slika stroja je ponazoritev.

Stanje: pripravljen za uporabo (rabljen), Allmatic NC 125 High-Pressure Vice Jaw width: 125 mm Clamping width: 214 mm With base plate for vertical operation. Total length without base plate: 450 mm Total length with base plate: 505 mm Height: 145 mm You are welcome to visit for an inspection. We are happy to arrange affordable shipping for you. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Lodowc At Espfx Ac Usaf Visit our shop and take a look at our other offers as well. All company and brand names mentioned are the property of their respective owners and are used only for identification and description of the products. Technical data may vary and errors in the item description are possible and reserved.

Stanje: rabljeno, 1. Strojal za obdelavo robov CASOLIN Mega 230/4 2. Kompresor Ceccato P 270 11 X 3. Kalibrirni stroj SICAR Meta 1 / Meta 2 4. Strojal za obdelavo robov WEINIG Quattromat 23/23P – navodila + katalog Ljdpfxjkvnhwo Ac Ujaf 5. Pralni stroj ORMA NPC 6/95 6. Kalibrirni stroj SCM CL 95-110 7. Kalibrirni stroj SCM CL110K RT – CL110K RR – 2 kos. 8. Kalibrirni stroj COSTA CK 950350 9. Lakirni stroj GIARDINA G02/05 10. Pralni stroj ITALPRESSE SCF/4-B 11. Strojal za obdelavo robov MAGIC Forma 180 – 2 kos. 12. Trakovna žaga CENTAURO SP400/600/700 13. Strojal za obdelavo robov MAGIC Recta 180-220 14. Strojal za obdelavo robov WEINIG Unimat 14K 15. Trakovni brusilni stroj SOCOMEC LN210/LN260/LN300 16. Strojal za obdelavo robov SICAR V4 17. Pralni stroj ITALPRESSE UT/6-P 18. Pralni stroj ITALPRESSE SCF/6-J 19. Stro j za obdelavo debeline SAC RS53s/RS63s + katalogi 20. Strojal za obdelavo robov SCM P64 B 21. Strojal za obdelavo robov SCM Sintex – 3 kos. 22. Stroj za izdelavo utorov TSG2T 23. Trakovni brusilni stroj SAMCO Unilev 150 24. Pralni stroj SORMEC 2000 serija T90 25. Krožna žaga OMGA T50-350 – 2 kos. 26. Stiskalnica TIGER 3 batov 27. Krožna žaga PEGIC F315/R300 28. Kalibrirni stroj SCM Sandya5 – navodila + katalog 29. Kalibrirni stroj SCM UNO CCS – navodila + katalog – 2 kos 30. Kalibrirni stroj SBF Stefani 50/54/56/58 31. Dvojna krožna žaga OMS ok 330/ ok super 350 32. Stroj za izdelavo blokov POR Standard 33. Kalibrirni stroj CB 2N RR1T 1100 34. Večrezilni stroj SICAR MS30 35. Kompresor MOTTEI SR120/140 36. Kompresor ABAC Genesis 15 37. Krožna žaga UNIVER 400IP ( Pertici s.p.a. ) 38. Dvojna krožna žaga OMGA TR2A 39. Stroj za izdelavo blokov COMAFER Dinamic mod. 110N 40. Strojal za obdelavo robov FUTURA Modul 4 41. Strojal za obdelavo robov Futura Modul 180 – 220 42. Strojal za obdelavo robov GRIGGIO G18/G22 Quadro 43. Pralni stroj TIGER TR/6-F 44. Pralni stroj ORMA Omnia 30/13 45. Kalibrirni stroj SCM Sandya10 RR 1100 – Navodila + električna shema 46. Kompresor BALMA 47. Trakovni brusilni stroj COMEC LN-LS ( za stole ) 48. Kompresor GENESIS-OASIS 5,5-11 kW – ( angleška različica ) 49. Kalibrirni stroj CB 2N R+RT 1100 50. Kalibrirni stroj Sandya 3 51. Stroj za izdelavo blokov POR Junior ( sken ) 52. Kalibrirni stroj VIET Challenge 211 – navodila ( sken ) 53. Kalibrirni stroj VIET Target 211 ( sken ) 54. Sesalnik MAPELLI GM 36 Plus ( sken ) 55. Kotni stroj CASOLIN Astra 56. Strojal za obdelavo robov MAGIC Forma 220 – katalog rezervnih delov, električna shema 57. Strigalni stroj FELDER A741 – navodila za uporabo 58. Stiskalnica ITALPRESSE Program 30 ( sken ) 59. Stiskalnica ITALPRESSE Falcon/S; Novo Program ( sken ) 60. Strigalni stroj PAOLONI PF2740 – PF2950/PF400 - PF500 61. Strigalni stroj CASADEI Syncro 62. Optimizirni stroj CURSAL TRVE550 ( sken ) 63. Stroja za obdelavo površin SORBINI T/20-MR 64. Strigalni in planer stroj MiniMax FS41 65. Strigalni stroj SCM Sintex NTE ( sken ) 66. Stroji za obdelavo lesa OMB21; OMB1 ES1; OMB1 ES2; OMB1 ES2B 67. Strojal za obdelavo robov FUTURA Krono 180/220/240 68. Regulator hitrosti MEC V.4; V.8 69. Stroj za obdelavo debeline SAC S53/S63 - + katalog in električna shema 70. Strigalni stroj FUTURA Junior 180-220 – navodila in električna shema 71. Stroj za obdelavo površin SORBINI VS/34-AC 72. Kalibrirni stroj VIETMAC PL/84 – Kombi 73. Kompresor Atlas Copco GX 2-7 EP; G 7-15 ( z elektronskim upravljanjem ) 74. Krožna žaga OMS/STAYER T10, T14 75. Kalibrirni stroj VIET Target 211 76. Sesalnik ARIATECH model ATE ( 3 vreče ) 77. Stroj

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza za navojne stroje CORMAK 800x500 mm je robustna in funkcionalna rešitev, namenjena strokovnjakom, ki se ukvarjajo s natančnim navojčenjem. Odlično se združuje z električnimi navojnimi stroji in navojno roko, kar zagotavlja stabilnost in udobje pri delu v vsaki industrijski delavnici. Njena konstrukcija je zasnovana za intenzivno uporabo, kar zagotavlja odlično kakovost, ergonomijo in enostavno uporabo. Zahvaljujoč inovativni tehnologiji omogoča miza učinkovito navojčenje, kar zagotavlja visoko natančnost in zanesljivost skozi leta. Glavne prednosti delovne mize za navojne stroje CORMAK 800x500 mm * Visoka natančnost: Miza je opremljena z utori za T-matice z razmakom 152 mm, kar omogoča natančno vodilo orodja, kar zagotavlja idealne pogoje za natančno navojčenje. * Robustna konstrukcija: Izdelana je iz trpežnih materialov, miza zagotavlja stabilnost in dolgotrajno zanesljivost pri intenzivni uporabi, kar je ključnega pomena pri delu z električnimi navojnimi stroji in navojnimi napravami. * Ergonomija in udobje pri delu: Miza ima optimalno delovno višino (760 mm) in ustrezne dimenzije delovne površine (800 x 500 mm), kar zagotavlja udoben delovni prostor in zmanjšuje utrujenost uporabnika med dolgotrajnimi operacijami navojčenja. * Mobilnost: Zahvaljujoč kolesom z zavoro lahko mizo enostavno premikate po delavnici, kar omogoča prilagodljivo prilagajanje delovnega prostora trenutnim potrebam. * Funkcionalnost: Predalnik za orodje zagotavlja hiter dostop do potrebnih dodatkov, kar pospeši in olajša procese navojčenja ter poveča učinkovitost dela. Lsdpfx Acovugu Es Uoaf Konstrukcija in tehnologija delovne mize za navojne stroje CORMAK 800x500 mm Delovna miza za navojne stroje CORMAK 800x500 mm je zasnovana za vzdržljivost in natančnost. Delovna površina, izdelana iz materialov, odpornih na intenzivno uporabo, zagotavlja odlično togost in stabilnost pri delu z navojnimi stroji in električnimi navojnimi napravami. Utori za T-matice s širino 3x14 mm in razmakom 152 mm omogočajo varno in natančno vodilo orodja, kar se odraža v visoki kakovosti navojev. Konstrukcija mize zagotavlja polno funkcionalnost, kar omogoča enostavno upravljanje z materiali različnih velikosti. Miza je opremljena s praktičnim predalnikom za orodje, ki omogoča hitro shranjevanje dodatkov, kar izboljša organizacijo dela. Vgrajena kolesa z zavoro zagotavljajo mobilnost mize, kar omogoča enostavno premikanje po delavnici, hkrati pa zagotavljajo stabilnost med operacijami navojčenja. Standardna oprema delovne mize CORMAK 800x500 mm * Predalnik za orodje: Omogoča shranjevanje dodatkov, kar izboljša organizacijo in udobje pri delu. * Kolesa z zavoro: Omogočajo enostavno premikanje mize po delavnici, kar zagotavlja mobilnost in prilagodljivost. * Delovna površina: Dimenzije 800x500 mm in debelina 50 mm zagotavljajo ustrezno togost in prostornost za delo z različnimi materiali. * Utori za T-matice: Omogočajo natančno vodilo navojnih orodij. Tehnične lastnosti delovne mize CORMAK 800x500 mm Dimenzije delovne površine: 800 x 500 mm Višina mize: 760 mm Debelina delovne površine: 50 mm

Leto izdelave: 2008, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge V3 Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel ranges: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading With automatic lowering tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Lajdpfxsm Amf De Ac Ujf Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us upon receipt of order. Incl. operator training at Techma on your overhauled machine Optionally available: transport, commissioning, training, chiller

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. A 6-month warranty on all machine parts is included. Laodsv Hbygepfx Ac Usf Commissioning and training can also be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 450 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge 2 eCut Ljdpfxoxyxfpj Ac Ujaf Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receiving the order. We are also pleased to offer commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, The GF AgieCharmilles CUT 30P from 2011 is a powerful and precise used wire EDM machine, specifically developed for demanding machining tasks in the metalworking industry. Leveraging state-of-the-art technology and intelligent control systems, the CUT 30P delivers outstanding cutting quality, low maintenance requirements, and excellent return on investment. Key Features & Benefits: ✅ Large Working Area: Workpiece dimensions: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel distances X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy with glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times ✅ Intelligent Control & User-Friendliness: Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphics check for precise simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Lodpjv S Ua Djfx Ac Ujaf Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from 2011 is cleaned, overhauled, and extensively tested before sale to ensure top quality and reliability. 📩 Contact us for a personalized offer or to arrange a demonstration! We are also happy to offer commissioning and training on the machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Ljdpfxov Dkvre Ac Ueaf Commissioning and on-site training can be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V Generator Achievable surface finish: Ra: 0.05 µm Laodpst I Dtnsfx Ac Uof Available wire diameters: 0.05 – 0.30 mm, incl. KIT 50 option Incl. automatic wire changer (AWC) Submerged wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. glass scales for X and Y axes VISION 5 control system 15" LCD colour screen, short-stroke keyboard, and mouse Incl. Conic-Plus option for improved taper cutting Incl. Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg The machine is completely overhauled and tested by us. A customised test cut is available on request. We also offer on-site commissioning and training for this machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel ranges: X = 800 mm, Y = 550 mm, Z = 525 mm Travel ranges: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3,000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and automatic re-threading after wire breakage With automatic front door Incl. AGIEJOGGER hand-held unit for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 2,900 x 3,050 x 2,850 mm Net weight: 6,000 kg The machine will be cleaned and fully overhauled in our facility upon receipt of order. You will receive a 6-month warranty on all machine components. Ledpfswvqwrsx Ac Usaf We are also happy to offer commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge V2 Year of manufacture: 2007 Lodewqcm Uopfx Ac Ujaf Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand-held box Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. We are also happy to offer you commissioning and training services.

Stanje: zelo dobro (rabljeno), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of Labotek's FMD-M series, a leading manufacturer of equipment for material drying, dosing, and conveying in the plastics industry. The FMD-M series comprises modular dryers designed for the processing of plastic granulates. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for the processing of plastic granulate and are characterized by their modular construction, allowing for flexible adaptation to various production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Lsdpfx Acozii Dbj Uoaf Frequency: 50/60Hz The Labotek AVR3G is an industrial vacuum loader with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granulate. It is particularly suitable for small to medium-sized production plants where space and weight are critical factors. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granulated raw material (minimum grain size 3 mm) Operational noise level: Below 69 dB Contact parts: Stainless Steel AISI 304 Maximum material temperature: 80 °C Alarm function: For material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data! The above information is for guidance only!) For further questions, please contact us by phone.

Leto izdelave: 2006, stanje: novo, I am selling 12 sets of new saw blades suitable for HOLZMA panel dividing saws. Main saw blade FABA 600 x 5.8 / 4.0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4.8 - 5.8 x 45 Z=36 Total price: 1000 euros. Available immediately. Lasdpfxsg Dvuts Ac Uef

Stanje: dober (rabljeno), Universalna brusilna plošča za tračno brusilko iz grafita, primerna za masivni les in furnir - dimenzije 330 x 150 mm Skupne dimenzije: 330 x 150 x 100 mm (V) Lsdpfxsi Art Es Ac Ueaf Teža: 4 kg

Leto izdelave: 2003, stanje: dober (rabljeno), Stroji za erozijo s potapljajočo elektrodo Tip stroja: OPS Ingersoll Gantry 5000 Letnik proizvodnje: 2003 Lasdpfxszi Sfuo Ac Uof TEHNIČNI PODATKI Hodi

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ležaji za žage DK14 Ležaji za žage DK16 Ležaj za žago DK17 Lodsxq R Rxopfx Ac Ueaf in dodatna oprema

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor Lsdpsb A Ta Nsfx Ac Uoaf - Mounted on dovetail guide, cross table - With guide for trimming veneer edges - Power: 0.15 kW, 11,160 rpm at 200 Hz - Voltage: 133 volts - Mount: - Tool: Ø 150 mm - Dimensions: 880/260/H300 mm - Weight: 18.5 kg

Stanje: rabljeno, Replacement blades for cutting machines -Blade size: 127x25.4x1.1 mm -Urschel part no.: 46097 -Quantity available: 33 pcs -Price: per piece -Weight: 25 g/piece Ljdpfxsdki Rge Ac Usaf

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor -on dovetail guide, cross table -with guide for trimming veneer edges -Power: 0.15 kW 11,160 rpm at 200 Hz -Power: 0.22 kW 17,250 rpm at 300 Hz -Voltage: 133/200 V -Mount: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg Lodpfx Aceb A Sy Ho Ueaf

Stanje: dober (rabljeno), Težko-tovorni transportni valji, strojni valji, transportni vozički, težko-tovorni vozički, tankovski valji, transportni valji za stroje z usmerjevalnim mehanizmom -Transportni valji za stroje: komplet 4 kosov -Nosilnost: 5 t na transportni voziček -Valji: Ø 77 x 70 mm -Dobava/cena: komplet Laodpfjww U Nujx Ac Uef -Usmerjevalni mehanizem: na zalogi, lahko dobavimo za doplačilo, glej ID 35935 -Dimenzije posamezno: 655/560/V95 mm -Teža: 59 kg/kos

Stanje: dober (rabljeno), Transportni valji za težke tovore, strojni valji, transportni vozički, vozički za težke tovore, oklepni valji, transportni valji za stroje -Transportni valj za stroje: oklepni valj, transportni voziček Cargo Trolley tip CT-8 Ljdpsw Skpxofx Ac Usaf -Nosilnost: 12.000 kg -Valji: 8 kosov poliuretanskih valjev -Količina: na voljo 4 transportni vozički -Cena: na kos -Mere: 480/200/V100 mm -Teža: 25 kg/kos.