Vpenjalni stolp za primež

ALLMATIC NC 125

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, širina čeljusti: 125 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Širina čeljusti: 125 mm Hodpfx Aoyn Dc Dsgxol PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 580 x 200 x 120 mm Teža stroja: 70 kg Zunanja referenca: Lot 26/Feweta

Stanje: dober (rabljeno), Spindle diameter: 80 mm Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table Hjdpfx Agsphl Ecexol - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, širina čeljusti: 125 mm, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Širina čeljusti: 125 mm PODATKI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 580 x 200 x 120 mm Teža stroja: 70 kg Hsdpfx Agoyn A I Ssxjl Zunanja referenca: Lot 25/ Feweta

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 200 kg, skupna višina: 600 mm, skupna dolžina: 500 mm, skupna širina: 420 mm, širina čeljusti: 125 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! Hjdpfxsynkp Ro Agxjl TEHNIČNI PODATKI Širina čeljusti: 125 mm PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 500 x 420 x 600 mm Teža: 200 kg OPREMA Na osnovni plošči Zunanja referenca: Lot 16 / Wittner

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, X-travel: 185 mm Z-travel: 360 mm B-travel: 460 mm Control: Mazatrol 640 T Max. swing diameter: 550 mm Max. turning diameter: 280 mm Max. workpiece weight: 200 kg Bar capacity: 51 mm Main spindle speed: 35–6,000 rpm Milling spindle speed range: 25–4,500 rpm Rapid traverse (X/Z axes): 30/33 m/min Rapid traverse (B axis): 30 m/min Tool turret: 12 stations Approx. machine weight: 4,100 kg Capacity: Chuck size: 6” Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret face: 80–535 mm Main spindle: Speed: 35–6,000 rpm Spindle bore: 61 mm Sub-spindle: Speed: 35–6,000 rpm Spindle bore: 52 mm Turret: Number of stations: 12 Tool dimensions: External turning tool: 20 mm Hjdeyukf Sspfx Agxjl Internal turning tool: 32 mm Milling drill: 16 mm Tapping tool: M12 End mill: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Driven tools Turning tool holders Coolant system Chip conveyor Documentation

Stanje: rabljeno, Leto izdelave: 2014, INDEX C200 CNC stružnica 3 revolverske glave 2 vretena Fanuc krmilnik: 31i-Model B Motorna aksialna stikala: 6 kos Motorna radialna stikala: 13 kos Nosilci orodij: 11 kos Hodpfx Ajxxm Hfegxel Nosilci vrtalnih palic: 21 kos Zatič: 1 kos Vložki za polnjenje + tulke: Ø51/Ø46/Ø41 Nove MBL vložke za polnjenje: 2 kompleta 2 optični merili obnovljeni pri HEIDENHAIN 1 Balluff škatla z robotskimi rokami z različnimi senzorji, bližinskimi stikali in kabli Motorizirani jermeni: 6 kos Set antivibracijskih vložkov za MBL polnilnike Čas obratovanja: Čas vklopa: 37.946 Hidravlične ure: 37.500 Proizvodni čas: 26.500 Z MBL podajalnikom palic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Hodpfxsyyuvte Agxel Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel: 410 mm y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance / Capacity: Maximum swing: 545 mm Maximum machining diameter: 545 mm Maximum outside diameter for bar work: 51 mm Maximum machining length: 519 mm Maximum workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Maximum torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Hsdpfx Aoyt R Idegxol Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool dimensions: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, Fast precision coordinate measuring machine and gear measurement center. Moving gantry with patented TRICISION™ technology X 900 / Y 1,500 / Z 700 Control unit B5 (retrofitted in 2021) High-resolution Leitz 3D measuring head LSP-S2 Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm Probe changer system with 8 positions Hsdpjv S Dk Eofx Agxsl Large package with probe accessories Software: PCDMIS CAD++ 2024 12-month warranty Computer, 32" monitor Installation, commissioning, and acceptance in accordance with DIN EN ISO 10360-2,4,5

Stanje: rabljeno, Leto izdelave: 2006, Verigalni pomik - x 500 mm Verigalni pomik - y 450 mm Verigalni pomik - z 400 mm c-os 360° b-os 0 - 108° Vpenjalna površina: 500 x 380 mm Krmiljenje HEIDENHAIN - iTNC530 Hitrost vretena 20 - 18.000 min⁻¹ Število mest v menjalniku orodij 60 Vpenjalo orodja HSK 63 5-osni simultani obdelovalni center | DMG - DMU 50 eVo linear z NC zasučno-rotacijsko mizo, 60-kratnim menjalnikom orodij, dvojnim prijemalom, SKZ (40 bar) in transporterjem ostružkov. Dodatna oprema: - Heidenhain TS 640 infrardeči merilni tipalnik - Lasersko merjenje orodja - Trakasti filtrirni sistem Hodpfxoyvkuqe Agxol Stroj je v vzdrževanem stanju. Za več tehničnih podrobnosti glejte ponudbo.