Stroj Za Rezkanje Portalov nakup rabljenega (92.146)

Stanje: zelo dobro (rabljeno), Beveling machine for HSS saws Pedrielli model PGS Nodpfsul Tyljx Aliold

Stanje: zelo dobro (rabljeno), Premer kolesa – maks. 175 mm Širina kolesa 350 mm Njdpfjznnitsx Alisld Modul – maks. 3 Modul – min. 0,5 Masa stroja pribl. 0,9 t Potreben prostor pribl. 1,2 x 0,8 x 1,4 m

Stanje: kot nova (razstavni stroj), Na prodaj je rabljena krožna žaga/freza Hammer B3 Basic z dolžino reza 950 mm. Stroj je v stanju, kot nov, in ga je naše strokovno osebje obnovilo in preverilo. (Popolnoma delujoč) Tehnični podatki: - Dolžina reza 950 mm - Širina reza 700 mm - Višina reza 103 mm - 4 hitrosti frezanja - Priključek za odsesavanje prahu Ø 120 mm - Leto izdelave 2022 - Motor 3 kW / 4,1 KM - Stanje, kot nov Njdpjm Rgngefx Alijld Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate med našimi urami odpiranja. Pridržujemo si pravico do vmesne prodaje! Če ste zainteresirani za ta stroj, vas prosimo, da v obrazcu za stik navedete svoje popolne kontaktne podatke, da bomo lahko obravnavali vašo zahtevo na profesionalen način! Hvala vam, vaše NEUREITER Team Povezani izrazi: krožna žaga, freza, frezalni stroj, žaga, kombinirani stroj, večnamenski stroj Referenca: R-L0AIU

Stanje: dober (rabljeno), Leto izdelave: 2000, X-pomik 3500 mm Y-pomik 1600 mm Z-pomik 1200 mm Hitrosti vretena 250 - 3000 vrt/min Vpenjanje orodja ISO SK-50 Menjalnik orodij 40 Hitri pomik: 15000 mm/min Delovni pomik 5000 mm/min Mere mize - vzdolžno 3860 mm Mere mize - prečno 1000 mm Krmiljenje HEIDENHAIN TNCi530 Teža stroja ca. 24 t Potrebni prostor ca. 8000 x 5000 x 4000 mm Nlodpfxoykvayj Alisd Ta SORALUCE je v dobrem stanju in 100% delujoč. Stroj je možno po dogovoru še vedno videti v obratovanju pri prodajalcu.

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Njdpfjxcbl Dex Alisld Teža: 3,8 kg zelo dobro stanje

Stanje: novo, Število rezalnih vreten: 2 kos. Opora: 1 da Orodje: da Profilna rezalna glava Stegherr, tip KSF-mini vključno s standardno oporo z 2 nastavljivima oporama, brez orodja Z napravo KSF-mini lahko hitro in natančno izdelate vse vrste profilnih povezav, ki se pojavljajo v praksi. Natančna izdelava se doseže s tem, da se obdelovalni predmet tridimenzionalno obdeluje v primežu. Pogonski sistem orodja je preko dveh trifaznih motorjev; napetost obdelovalnih predmetov se uravnava pnevmatsko. Profilni rezalnik je zasnovan za določeno širino profila. Žage, ki izvajajo razširitev, so preko vmesnih obročev nastavljive na dimenzije profilnega rezalnika. Nagibna naprava je brez zračnosti. Stroj je zasnovan za maksimalni presek obdelovalnega predmeta 56 x 46 mm. Napetost: Evropa: 400 V (+/- 10%) / 3-fazni / 50 Hz, ZDA: 440 V (+/- 10%) / 3-fazni / 60 Hz Druge napetosti na zahtevo. Nlodpsyrtzqefx Alied Navodila za uporabo v nemščini ali angleščini. Podstojek za mizo: 1.070,00 EUR Nožna kontrola: 900,00 EUR Nastavljiva optika: 130,00 EUR Profilni rezalnik v izvedbi z HM-Wepla, na voljo: premeri 5, 7, 9, 11, 13 mm. Cena za kos: 650,00 EUR 1 komplet nadomestnih rezalnih ploščic za profilni rezalnik (= 10 kosov): 190,00 EUR Žaga HM, cena za kos: 170,00 EUR (Pri profilu, na primer 10 mm, so potrebne 3 žage) Nastavitev stroja na orodja, ki jih zagotovi stranka, cena za posamezno orodje: 700,00 EUR Pakiranje v leseno embalažo (primerno za kopenski prevoz): 650,00 EUR Pakiranje na paleto in zavitje s termo skrčljivo folijo (samo znotraj Evrope, ne za zračni prevoz): 340,00 EUR Cena je določena ob tovarni, brez embalaže, brez zavarovanja, ob dostavi znotraj Nemčije pa se obračuna veljavna stopnja DDV ob času dostave. (vse tehnične specifikacije so po navedbah proizvajalca, brez jamstva!)

Stanje: zelo dobro (rabljeno), Premer obdelovanca – maks. 400 mm Dolžina navoja 1000 mm Modul – maks. 4 (8) Nsdpfx Alozmapijield Modul – min. 1 Dolžina vpenjanja maks. 850 mm Masa stroja približno 3,1 t Potreben prostor približno 3,1 x 1,1 x 1,6 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, 3-osna posteljna stružnica - univerzalna | Proizvajalec: AUERBACH | Tip: FBE 2000 Letnik: 2002, splošno obnovljena s strani proizvajalca leta 2015 Popolna obnova leta 2015 je vključevala, med drugim, razstavljanje vseh osi, čiščenje, ponovna sestava in ponovna uvedba v uporabo (podrobnosti so navedene). Stroj si lahko ogledate v obratovanju po dogovoru. Stanje: zelo dobro ohranjeno / pripravljeno za uporabo. Delovni čas (13.07.2026), približno: 40.000 ur Zadnje vzdrževanje leta 2025, pri 36.250 delovnih urah. TEHNIČNI PODATKI: Hodi: - Os X: 2.000 mm - Os Y: 1.000 mm Njdpfozmn Ruox Alield - Os Z: 900 mm Dimenzije / Teža: Dimenzije Š/G/V: 5,5 (7,15 vklj. odvoda ostankov) x 4,1 x 2,7 m Teža stroja: 13 t OPREMA: - CNC krmilnik: Heidenhain TNC 426 - Univerzalna glava za struženje (mehansko vrtljiva), proizvajalec: SEMPUCO, KFU-2/45/021 - Število vrtljajev vretena: 3.500 vrt/min - Magazin za orodja: 46 mest - Držalo za orodje: SK 50 - Elektronsko ročno kolo - 3D infrardeči merilnik, proizvajalec: m&h Hexagon - Nosilnost mize: 6 t - 5 x 22 mm T-utori v mizi za struženje - Odvoda ostankov z sistemom za hlajenje - Velika klimatska naprava, omarica za nadzor - Pogon za os Z kot rezervni del - Dokumentacija v nemščini Brez garancije za popolnost in pravilnost tehničnih podatkov in glede opreme. – Pridržana pravica do prodaje.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: Nljdpfot Hwyljx Aliod • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1985, stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Nsdpfx Aot Hwn Nolisld Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry.

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm Nodpfx Aot Hwwqjlisld - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm z-travel 400 mm O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: DECKEL MAHO CNC Universal Milling Machine Type: DMU 50 M Year of manufacture: 1998 _____ Working area: - Travel X-axis: 500 mm - Vertical travel Z-axis: 400 mm - Cross travel Y-axis: 400 mm Nedpfx Alsv Td Eloijld - C-axis – table rotation, manual: 360° - B-axis – table tilting, manual: ° Table size: Ø 700 x 500 mm Table tilting range: ° Table rotatability: 360° Max. workpiece weight: 200 kg Distance between table and spindle approx.: 550 mm Reach between machine and spindle min/max: 2 – 6 mm Tool holder: SK 40 Spindle speeds steplessly programmable: 20 – 4,500 rpm Feed rates / rapid traverse max.: 5,000 mm/min AC main drive 0%/40% duty cycle approx.: 9 / 13 kW Total power approx.: 15 kW - 400 V - 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment • 3-axis path control HEIDENHAIN TNC 124 with display and direct input of all data, including electronic handwheels for all 3 axes. • All 3 axes in the milling head, allowing “irregular” workpieces to be machined on the stationary table. • Rotary table, 360° manually rotatable, +/-° manually tiltable (each with clamping). Digital display of tilt angles integrated into the control. • Simple coolant system, attached control cabinet (SIEMENS equipment). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good! Ideal for training or single-part production! Click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Always a large selection of milling machines in stock – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts Nsdpst Hw D Refx Aliold used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Nedpet Hw Hxsfx Alield Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Nsdpfjt Hw R Dsx Alijld Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Nledot Hxagepfx Alisd Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Nedpot Hxa Hsfx Alijld Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Nljdpfx Aot Hwv Holied Total power requirement kW Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Nedpfot Hwxbjx Alield Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Nsdpfxst Hwxze Aliold Wheel width 350 mm Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Nlsdpfx Aet Hw Dkslijd Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150:10486, premer zobnika: 150 mm, skupna višina: 1.400 mm, skupna širina: 800 mm, premer obdelovanca (maks.): 150 mm, največja hitrost vretena: 1.000 obr/min, hitrost vretena (min.): 112 obr/min, skupna masa: 1.300 kg, premer orodja: 50 mm, Na prodaj je preverjen stroj za rezkanje zobnikov Koepfer 150. Stroj je idealen za gospodarno izdelavo cilindričnih zobnikov, zobčnih koleščkov in drugih zobničenj tako v posamezni kot v serijski proizvodnji. Nsdpozfhyysfx Alield

Stanje: rabljeno, Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 110001, Sale of SACEM boring and milling machine for machining large workpieces. The machine is in full working condition and is currently in use for ongoing production—primarily for reworking operations. It is especially suitable for machining large and cumbersome components. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 – 6 bar Spindle speed: 4 – 1,600 rpm Feed rate: 3 – 2,500 mm/min Tool holder: SK40 Drilling depth / spindle stroke: 800 mm Travel distances: x axis: 900 mm y axis: 900 mm z axis: 1,200 mm Clamping surface: 1,000 x 1,200 mm Max. workpiece weight: 4,000 kg Accuracy: 0.02 mm Nljdpfoxbn A Tjx Alisd Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to traders)—suitable company profile required • Sale only within Germany or the EU Sales / takeover conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel must work with the appropriate personal protective equipment, and only trained personnel may be employed. If you are interested, we look forward to your response to coordinate further details directly.

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Nledpfewhd Afex Alijd Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Technical data: Drilling capacity in steel: 50 mm Thread cutting capacity: M33 Face mill: 100 mm End mill: 25 mm Spindle: MT 4 Throat depth: 340 mm Spindle speeds: (6) 50 – 1510 rpm Quill stroke: 200 mm Quill feed: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Table size: 820 x 240 mm X-axis travel: 460 mm Y-axis travel: 280 mm Column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm Motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - Thread drawbar - Thread cutting device - Automatic spindle feed - LED machine lamp - Swiveling table Njdpfx Aopxmlqolijld - Manual fine feed - Coolant system - Height-adjustable safety guard - Spindle guard with limit switch