Scm Si3 nakup rabljenega (695)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit Laedpfjitvkuex Al Nja “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide Ljdpfx Aocrnm Nel Neaa On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. Lodpsyftzkefx Al Njaa (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Loded Akygspfx Al Noaa Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Ledpfohvan Isx Al Nsaa Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion Ledjdibw Aspfx Al Nsaa - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Laodpfxofh Tmmo Al Nsa Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: Lsdpfx Aed E Ixzsl Neaa • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2023, Exhibition machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet every woodworking requirement. Highly efficient – with drilling spindles up to 8,000 rpm and industry-leading technology, offering the most robust spindle on the market with over 1,000 maintenance-free operations. Fully equipped – the suction cups can be individually configured using the TV FLEX worktable to tailor the machine to any specific need. Easy and intuitive programming is ensured by the integrated Cad-Cam MAESTRO CNC software. User-friendly operation – the lowered machine frame allows for unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and in the PRO SPACE version, no additional safety measures are required. Support structure The supporting structure consists of an exceptionally sturdy monolithic steel base, heavily ribbed for maximum robustness. The extra-wide support was specially designed to ensure stability and consistent precision under all operating conditions. Floor anchoring is not necessary. The base provides a large and solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support to withstand the most demanding workloads, ensuring superior quality and increased accuracy. The moving portal is fabricated from a solid single piece that is anchored to the base and travels on prismatic guides with recirculating ball carriages of the highest quality. The working unit is attached and moves on Y and Z axes, also on prismatic guides with recirculating ball carriages. Motion for the lower moving unit (X axis) and the working unit along the gantry traverse (Y axis) is accomplished via rack and pinion drives with helical gears, providing higher tooth engagement for greater acceleration and increased speed along X and Y axes. The specially designed helical gearing greatly reduces wear on mechanical parts and ensures quieter operation. The vertical Z axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic load and withstanding high acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, delivering extremely high finishing quality due to the elimination of vibrations. Movement along the X-Y-Z axes is performed by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Better positioning accuracy due to high-resolution encoders - No setup required upon machine start-up thanks to absolute encoders - Elimination of regular maintenance since the brushless system contains no brushes. Axis movement and all working elements are managed by... Ledpfxoytrgze Al Noaa

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Minimum workpiece length: 260 mm Cutterblock diameter: 120 mm 4 knives: 35x3x640 mm Cutterblock speed: 4500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction port diameter: 150 mm Lajdpfxjy D U A Ie Al Noa Standard Equipment and Accessories - Automatic thicknessing table lift with 2 speeds, including micrometric positioning - Thicknessing table with vertical movement via 4 steel lead screws - Electronic 2-axis control for the setting of: * programmed thicknessing table position * feed speed - Infinitely variable electronic feed speed from 4 to 20 m/min via inverter - Feed speed adjustment based on maximum main motor power consumption - Ribbed steel infeed roller - Two upper rubber-coated outfeed feed rollers - Interchangeable feed rollers - Independent pneumatic pressure regulation for upper feed rollers - Motor power 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta start: * S1] 7.5 kW / 10 HP 50 Hz (8.8 kW / 12 HP 60 Hz) * [S6 -40%] 9 kW / 12 HP 50 Hz (11 kW / 15 HP 60 Hz) Safety/Protection - Noise reducing guards at infeed and outfeed - Micro safety switch on the guard cover - Emergency stop switches at the front and rear of the machine - Lockable main switch - Motor protection circuit breaker - Low voltage control circuit (110 Volt) - Automatic motor brake - C.E. Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA – cutterblock (monoblock version) with disposable reversible cutters 083201 Stand 930731 Voltage 400 V EU R02017 L'invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short term Location: Flörsheim

Stanje: novo, Technical data: Working width mm: 1,350 Ledpfxjhtuvro Al Noaa Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: rabljeno, SCM brand calibrating machine, model Sandya LS1 R110, with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. Lajdpouk Hi Rsfx Al Nja Roller: 11 kW Brush: 2.2 kW Conveyor belt: 0.75 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 80 mm, število osi: 3, skupna masa: 5.200 kg, moč vretenovega motorja: 7.500 W, največja hitrost vretena: 24.000 obr/min, Ta 3-osna CNC strojna enota SCM Morbidelli UNIFLEX HP je bila izdelana leta 2014. Ima delovno območje 3.000 mm na osi X in 1.300 mm na osi Y, z največjo hitrostjo 24.000 vrt/min. Stroj je opremljen z dvema rezkima vretenoma in vpenjalnim sistemom HSK-F63. Če iščete visokokakovostne CNC rešitve za obdelavo lesa, je SCM Morbidelli UNIFLEX HP, ki jo ponujamo v prodaji, odlična izbira. Kontaktirajte nas za več informacij. • Število rezkalnih vreten: 2 • Vpenjalni sistem: HSK-F63 • Navpična vrtalna vretena: 96 • Vodoravni vrtalniki (X/Y): 32 / 4 • CE oznaka Lajdpfx Alsy D Nmns Nsa Dodatna oprema • Čitalnik črtne kode • Zaprta ograja • Svetlobna pregrada • DXF-vmesnik • Programska oprema: SCM XILOG PLUS

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Lsdpfxoxwz Rco Al Noaa Leto izdelave: 1993 Oprema in tehnični podatki: - Dolžina vpenjanja vretena: 180 mm - Nagib vretena: -10° do +45° - Motoriziran dvig vretena z natančnim nastavljanjem - Motoriziran nagib vretena - Motor: 5,5 kW - Velikost mize: 1200 x 730 mm - Največja odprtina mize: 420 mm - Motorna zavora - Hitrosti: 3000/4500/6000/7000/10000 obr/min - Prikaz hitrosti - Priključek za odsesavanje: 125 mm - Z integralnim Aignerjevimi prislonom - S 3-valjnim podajalnikom Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ključne značilnosti: Model: K 800R Kapaciteta: 1 enota, neto teža 2.472 kg Namen: lepljenje robov in obdelava lesenih ter plastičnih komponent za pohištveno industrijo Standardi: skladen z evropskimi varnostnimi predpisi (CE certifikat) Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (CE norme) Sestava Olimpic K 800 "T-ERL" (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL Elektronsko upravljanje "StarTouch" namesto "Touch 7" Distančnik panelov na dovodni ograji Elektronsko pozicioniranje zgornjega pritisnega mehanizma Horizontalni pomik enote za čelno rezanje "K-SEL" Strgalna enota robov RAS/S 2P Protizlepilna enota "AAR" Naprava "EASY SIZE" Senzor za zaznavanje robov Komplet "IGLUE" za lepilno enoto Lepilni kotel "SGP" z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava (meglica) za občutljive robove Strgalna enota za lepilo "RCA/2C" Krtačna enota "SPN" Strgalna enota robov z radijem = 1 mm Strgalna enota robov z radijem = 2 mm Leseni bloki Lasdpfx Ajyxcbhsl Nsa

Stanje: rabljeno, številka stroja/vozila: 008019, Tip nameščene robne letve: tanka letev, močna letev Lepljenje: EVA Spojno rezkanje: da Lasdpfx Aljwvq E Ne Nja Večnamenska enota: da Zgornja rezkalna enota: da Maks. dovajalna hitrost: 40 m/min Maksimalna debelina plošče: 60 mm

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Na zalogi je horizontalna CNC mozničarka STARTECH CN Plus. Lasdpfx Aeip Dh Iol Nsa

Stanje: zelo dobro (rabljeno), Poravnalni skobelni stroji SCM MINIMAX F1 Rabljeni stroj v odličnem delovnem stanju CE predpis: DA Ljdpfx Aen Dw N Djl Njaa Navodila za uporabo in CE certifikat: DA Varnostni ščit Delovna širina mm: 410 Skupna dolžina mize mm: 2610 4 rezila za skobljanje 'Tersa' Vodilo nagiba do 45° Moč motorja KM: 5,5 Napetost: 380/50 Drugi poravnalni skobelni stroji so na voljo, kot je prikazano na sliki.

Stanje: zelo dobro (rabljeno), Leto izdelave 2015 Upravljanje na dotik z barvnim zaslonom Dodatna posoda za lepilo Protiadhezijska tekočina Predrezkalni agregat Zaobljenje vogalov na 2 agregatih Ravna in radialna ciklina Ljdpfoy Ef Uqsx Al Njaa Aktivacija agregatov s kontrolne plošče Polirke Teža 1625 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 2.980 mm, pomik osi Y: 1.280 mm, pomik po osi Z: 200 mm, število osi: 3, skupna višina: 2.680 mm, skupna širina: 3.000 mm, skupna masa: 3.295 kg, moč vretenovega motorja: 6.600 W, največja dolžina izdelka: 6.970 mm, največja hitrost vretena: 18.000 obr/min, Ta 3-osni CNC stroj SCM TECH Z25 PLUS H-R4 je bil izdelan leta 2005. Ima delovno območje 2500 x 1000 mm in pomike 2980 mm v osi X, 1280 mm v osi Y ter 200 mm v osi Z. Stroj je opremljen s 16 vreteni, ki delujejo s 4000 vrt/min, in električnim vretenom z največjo hitrostjo 18.000 vrt/min. Če iščete visokokakovostne možnosti CNC-obdelave, razmislite o nakupu stroja SCM TECH Z25 PLUS H-R4, ki ga ponujamo. Kontaktirajte nas za več podrobnosti. • Delovno območje: 2500 x 1000 mm Laedpjy Dgb Nofx Al Nea • Programirljive hitrosti: X 25 m/min / Y 30 m/min / Z 22,5 m/min • Vektorska hitrost: 40 m/min • Vrtalna enota: 16 vreten, 4000 vrt/min, 2,2 kW (10 navpičnih + 6 vodoravnih) • Glavno vreteno: HSK-63 • Magazin orodij: Stranski magazin, 7 pozicij

Leto izdelave: 2010, obratovalne ure: 540 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.735 mm, pomik po osi Z: 250 mm, skupna masa: 2.000 kg, število osi: 4, This 4-axis woodworking boring machine, SCM TECH Z2-27-C, was manufactured in 2010. It offers a maximum workpiece height of 160 mm, a length of 2700 mm, and a width of 1300 mm. The machine is equipped with an overhead milling spindle and a horizontal drilling unit, enabling versatile machining operations. If you are looking for a high-quality woodworking machine, consider the SCM TECH Z2-27-C that we have for sale. Contact us for further details. • Electrical specs: 400 V, 3 + N, 33 A, 50 Hz, switching capacity 10 kA • Control system: Xilog Plus • Machining units: Sawing unit (included), horizontal boring unit (included), milling spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double columns) 1210 mm • Max. traverse speed: 60 m/min • Clamping system: pneumatic clamping bars; number of clamping bars: 6 • Suction pad sizes: 120x120 mm and 55x120 mm Lajdpfey Dd R Iex Al Noa • Machine hours: 5,500 h

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 “Z” Version for RTC 135 5257452 Vacuum table with electric fan 3kW 5257453 Oscillating belt air blow-off device for 5257454 Oscillating belt air blow-off device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure rollers, 2nd position 5257500 Grooved rubber pressure rollers, 3rd position Laodpfey Ehiwsx Al Nja 5257504 Infinitely variable conveyor feed with inverter 5257605 Inspection door with window 5257606 LED lamp for internal lighting TECHNICAL DATA Dimensions and Weights Length (approx.) 1800 mm Width/Depth (approx.) 2000 mm Height (approx.) 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Line frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (main motor): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Maximum sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Product Information EU 2023/2854 Type of data generated: Usage data Format of generated data: Common, machine-readable formats such as JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On the device and on a remote server Data access: On device and via physical as well as wireless interfaces Location: ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2026, Table Router SCM / CASADEI F 25 M LL FK Robust woodworking machine with spindle moulder tilting ±45° on both sides and MK4 interchangeable spindle Item number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel and cast iron construction - Dynamically balanced spindle unit anchored to the worktable - Exceptionally robust design - Smooth running thanks to precision units and high machine weight - Standard with forward/reverse rotation and electronic interlock for direction change - Five speeds from 3,000 – 10,000 rpm - Speed change conveniently accessed from the machine side - MK 4 interchangeable spindle system as standard - Large cast iron worktable for lasting precision - Simple operation via controls and digital speed display on machine front - Large professional fence with fine adjustment and aluminium fence jaws, as standard - Fence adjustment via handwheel - Numeric display of spindle height setting, accurate to one-tenth of a millimetre - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Weight (net): approx. 510 kg Dust Extraction Connection Number of extraction ports: 2 Extraction port diameter: 80 mm Number of fence extraction ports: 1 Fence extraction port diameter: 120 mm Worktable Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm Set-up Information Space requirements note: Dimensions account for maximum travel or usable lengths Work area length: 3,700 mm Work area width/depth: 5,000 mm Work area explanation: Please add stated figures to space requirements to calculate recommended free installation area for the machine Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW Spindle Moulder Spindle tilt: -45° to +45° Spindle usable length: 140 / 180 mm Usable spindle length note: For spindle diameter Ø 30 – 35 mm / for spindle diameter Ø 40 – 50 mm Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Maximum cutter diameters Max. lowerable cutter diameter: 320 x 60 mm Max. profiling cutter diameter: 250 mm Max. tenoning cutter diameter: 350 mm Max. moulding cutter diameter: 160 mm EQUIPMENT Equipment Spindle fence: Heavy-duty professional design with aluminium fence jaws and fine adjustment, frontside handwheel adjustment with digital numeric display Curved-cutting safety hood: ✔ Spindle height adjustment: motorized, with digital display Spindle tilt adjustment: motorized, with digital display Control: motorized adjustment for spindle height and tilt with digital display Control elements location: on machine body Table design: table extensions left and right and extendable workpiece support (total width 2,500 mm) Location: ex-stock 54634 Bitburg - immediately available - Lajdpfx Ajy Ehcdol Noa

Stanje: rabljeno, Leto izdelave: 1994, Rabljeni stroj Leto izdelave: 1994 Oprema in tehnični podatki: - Širina skobljanja: 410 mm - Minimalna višina debeline skobljanja: 3 mm - Maksimalna višina debeline skobljanja: 240 mm - Največja odstranitev oblancev: 7 mm - Skupna dolžina miz: 2060 mm - Število nožev: 3 kos Tersa noži - Nastavitev mize za debelino: motorizirana - Prikaz debeline: mehanski - Motor: 4 kW - Hitrost podajanja: 6/12 m/min - Vhodni valj: jeklo - Izhodni valj: jeklo - Premer izsesovalnega priključka: 120 mm Dobavljivost: kratkoročno Röllbach Laedpfexwz Izex Al Nja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, TEHNIČNI PODATKI: delovna širina 230 mm delovna višina 120 mm pet glav glave s ploščicami urejenimi spiralno razpored glav spodnja/desna/levá/zgornja/spodnja dolžina podajalne mize 2500 mm Lodjy D Sfyepfx Al Neaa električna nastavitev višine nemoten priklop hitrosti podajanja pnevmatski pritisk materiala motor z vgrajeno zavoro vrtljaji glav 6000 obr./min skupna teža 2000 kg moč motorjev 5,5 kW/7,5 kW/7,5 kW/4 kW leto proizvodnje neznano