Rezervirano Krauss Maffei Km1300 - 8100 Mx (2011), 1300-Tonski Stroj nakup rabljenega (30.626)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) Nwjdpfoyugkwjx Agxjf The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Injection Moulding Machine KRAUSS MAFFEI KM 4000-24500 MC with optional ESS Energy Saving System Basic data Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping unit Clamping force: 40,000 kN Opening force: 2,525 kN Platen dimensions: 3315 × 2920 mm Tie bar spacing: 2240 × 1800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Max. injection pressure: 1,843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electro-hydraulic system Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of heating zones (cylinder): 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Machine dimensions and weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS energy saving system (Energy Saving Systems) Nedpfoyuf N Ejx Agxewf The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency converter, which adjusts the motor’s rotational speed to the actual machine demand during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key benefits of the ESS system: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - Global quality and proven technology used in the plastics processing industry - Reduced energy consumption during machine idling - Lower heat generation in the hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines without interfering with the machine's structure The ESS system is a modern solution that significantly lowers the operating costs of an injection moulding machine while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Year of manufacture: 2011, Arm reach: 1717 mm, Weight: 20 kg, Nwedpfxetxymmj Agxof Control system: DX100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Injection Moulding Machine KRAUSS MAFFEI KM 4000-24500 MC Nwsdpjyifg Djfx Agxsf _____ Basic Information • Year of manufacture: 2003 • Control system: MC4 • Software languages: Swedish, German, English _____ Clamping Unit • Clamping force: 40,000 kN • Mold opening force: 2,525 kN • Platen dimensions (horizontal × vertical): 3,315 × 2,920 mm • Tie bar spacing (horizontal × vertical): 2,240 × 1,800 mm • Mold opening stroke: 3,100 mm • Minimum / maximum mold height: 1,100 – 2,000 mm • Maximum daylight: 4,200 mm • Ejector stroke: 350 mm • Ejector force (front / rear): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw diameter: 150 mm • L/D ratio: 23 • Max. injection pressure: 1,843 bar • Injection volume: 13,254 cm³ • Shot weight (PS): 12,061 g • Injection rate: 1,431 cm³/s • Plasticising rate: 266 g/s _____ Electro-hydraulic System • Hydraulic pump motor power: 200 kW • Installed heater power: 159 kW • Number of barrel heating zones: 7 • Dry cycle time (Euromap 6): 270 cycles/h • Hydraulic oil tank capacity: 2,700 l _____ Machine Dimensions & Weight • Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine weight: 247 t • Maximum mold weight: 90,000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp mechanism (three-platen system) featuring a servo-electric drive for the clamping unit. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing unit Complete unit for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle opening: 6 mm Clamping unit Nedpoyft Nzsfx Agxewf Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Opening width: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection throughput: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of cylinder heating zones: 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, offering high precision, energy efficiency, and process repeatability.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar clearance (h x v): 900 x 800 mm Mounting platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Maximum daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Nodpfjydbbvsx Agxewf Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil quantity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Stanje: zelo dobro (rabljeno), Hydraulic motor for Krauss Maffei injection molding machines. MOS 6500-30-168 Nodpfx Agex Uqv Ssxewf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, premer vijaka: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line was used for producing pipes made of PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control system in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Side feeder - Complete control system for the dosing units and extruder - Single-zone oil temperature control - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) Nwedpsu Rda Isfx Agxof - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250 - 4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Leto izdelave: 1998, stanje: dober (rabljeno), Del stare neposredne ekstruzijske linije za cevi (ki je prav tako še na voljo). Stroj je dobavljen z naslednjimi komponentami: - 4-komponentno Colortronic doziranje (nova kontrola v letu 2017) - Berstorff KMC 85/2 (polži obnovljeni leta 2019) - Stranski podajalnik (sidefeeder) - Popoln nadzor doziranja in ekstruderja Njdpfjx S Rimsx Agxswf - Enostavno olje-temperiranje - Maag talilna črpalka

Stanje: rabljeno, CNC control, controller cards, MC3 controller, plug-in cards, printed circuit boards, electronic housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: Phoenix Contact, type UEGM Nsdpfx Asnch Iiegxewf -Quantity: 14 modules available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/piece.

Stanje: dober (rabljeno), Hidravlična črpalka, oljna črpalka, zobniška črpalka, lamelna črpalka, hidravlični agregat, dvojna hidravlična črpalka - Dvojna hidravlična črpalka: iz brizgalnega stroja KHS Krauss Maffei KM 1000-5000A - Črpalka 1: Voith tip IPH 6/5-125/50 300 bar - Črpalka 2: Voith tip IPR/H 6/5-125/40 210/300 bar - Pogon: Loher 75 kW 1500 v/min - Posamezne komponente: filter/ventili glej slike - Dimenzije: 2285/800/H900 mm - Teža: 1132 kg Nodpfx Ajg Avqcogxewf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Oprema: dokumentacija / priročnik, KraussMaffei KM650-4300 GX Machine Clamping force kN: 6500 Tie bar spacing (h x v) mm: 1110 x 960 Mould opening stroke mm: 1450 Minimum mould height mm: 450 Maximum mould height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Nwjdjy Apdqjpfx Agxof Control version: MC5 Screen language: German Condition: tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Full insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving mounting platen for blowing function - 2 x pneumatic valve on fixed mounting platen for blowing function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor control - Mechanical robot interface to EUROMAP 18 - Hydraulic ejector plate including threaded holes and through holes in moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "plasticizing" signal at HAN 3 A socket - Switching to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphic display and analysis package with 10 charts - Trend graphics - PV control - Interface for production data consisting of 5 potential-free contacts in control cabinet - 3 freely programmable inputs and outputs in control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Trotec Speedmarker 1300 z vključenim pripomočkom za krožno graviranje Prodaja samo podjetjem po prodajni pogodbi in identifikaciji preko Postident Prevzem v Ebersbach/Fils Nwodpoy Ew Rkofx Agxsf

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: C12_2, Funkcionalnost: popolnoma funkcionalen, Electric Press Brake C12 with Ball Screw Drive Njdpfoy A Nl Iox Agxswf CoastOne - Made in Finland Brand New Machine Press Force: 52 t Bending Length: 1300 mm Controlled Axes: X and R axis (2x manual backgauge fingers) Standard Type A / R1 / AMADA / Promecam press brake tooling system Control: TC15-2D Graphic Touchscreen Optional Equipment: - 4 or 5-axis backgauge system - Lazersafe standard light curtain - Lazersafe IRIS light curtain system - Lazersafe IRIS+ light curtain system with angle measurement - Extra display with 3D bending software - Support table - Front and rear lighting - WILA / Trumpf / Type B - tool clamping system - 2x bending aids 36 months warranty after installation

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Tool heating zones: 5 Nwsdpfx Ash Nmt Dogxef Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Note: Current operating time is 62,590 hours.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, RECKERMANN KOMBI 1300 / Heidenhain TNC 114 B - Konzolová frézka s najížděcí řídicí jednotkou TNC 114 B (NC dráhové řízení) - Rok výroby: 1987 - Velmi udržovaný původní stav - Pojezdy X/Y/Z: 1020x320x450 mm - Pracovní stůl: 1370x400 mm - Horizontální/vertikální frézovací zařízení - Vertikální hlava výkyvná +/- 90 stupňů - Vertikální frézovací hlava s pinolou: 80 mm zdvih pinoly - Otáčky vřetene / vertikálně: 33–1800 ot/min / 16 stupňů - Otáčky vřetene / horizontálně: 22–1200 ot/min / 16 stupňů - Upínání nástroje: ISO 50 - Automatické posuvy / rychloposuv na všech třech osách Njdpfey D T R Dex Agxjwf - Posuvová rychlost X-osy: 10–1000 mm/min - Posuvová rychlost Y-osy: 10–1000 mm/min - Posuvová rychlost Z-osy: 4–400 mm/min - Výkon pohonu: 11 kW - Chladicí zařízení - Pracovní osvětlení - Různé frézovací trny a strojní nástroje - Dokumentace Rozměry (DxŠxV): 3,3 x 2,6 x 2,1 metru / Hmotnost: 4500 kg S výhradou chyb a omylů.

Stanje: dober (rabljeno), Leto izdelave: 2005, Sila vpenjanja: 500 t Premer vijaka: 80 mm Tip: Horizontalen Pogon: Hidravlični Enota za zapiranje: Zapiralna sila: 500 t Odpiralni hod: 1260 mm Razmak med veznimi palicami (H×V): 900×800 mm Velikost plošče (H×V): 1270×1200 mm Brizgalna enota: Premer polža: 80 mm Maks. brizgalni tlak: 1829 bar Nwsdpfxsx H Au Ro Agxjf Brizgalna prostornina: 1433 cm³ Teža brizga (PS): 1304 g Električna oprema: Napetost: 400 V / 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 9.585 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, skupna dolžina: 6.700 mm, skupna širina: 1.600 mm, skupna višina: 2.300 mm, skupna masa: 10.900 kg, Zapiralna sila: 1.600 kN - kolenčasta ročica Steberna razdalja: 520 x 470 mm Velikost plošče: 710 x 660 mm Vgradna višina: 200 - 500 mm Odpiranje: 950 mm Premer polža: 55 mm Prostornina hoda: 523 ccm Nwsdpfx Agsy Aktmjxef Tlak brizganja: 1.904 bar Oprema Zaslon v nemškem jeziku CEE vtičnica 16A CEE vtičnica 32A Tlačni akumulator za povečano zmogljivost vbrizgavanja Po 3 prosto programabilni vhodni in izhodni kanali Jedrni izvlek pnevmatski, 2 x Stroj z vodnim baterijskim hladilnikom Stroj brez dozirnega lijaka Izravnalni elementi Vmesnik za barvalno napravo Vmesnik za temperirno napravo USB vmesnik Schuko vtičnica 10A Obrabno odporna plastificirna enota Ogrevanje orodja 24x Dimenzije stroja D x Š x V: 6.700 x 1.600 x 2.300 mm Skupna teža: 10.900 kg

Stanje: rabljeno, Leto izdelave: 1976, Rabljeni stroj Leto izdelave: 1976 Oprema in tehnični podatki: - Brušenje od spodaj - Vodenje materiala preko gumijastih valjev - Brezkontaktno vodenje oscilacije - Hitro zamenljiv pritiskalni nosilec - Elektromotorno nastavljanje debeline orodja z dobro berljivim digitalnim prikazovalnikom - Pritisni gumbi z zaščitnim krmiljenjem - Širina brušenja 1350 mm - Največja debelina obdelovanca 150 mm - Širina brusnega traku 1360 mm Nodewpm I Tspfx Agxowf - Dolžina brusnega traku 1900 mm - Podajanje valjev preklopno 10 + 20 m/min - Priključek na stisnjen zrak 6 bar - Poraba zraka cca 180 NL/min Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Leto izdelave: 2020, stanje: novo, Krauss Maffei touch panel, latest version for MC5/MC6, spare parts Width: 37 cm Nwodjqvuicspfx Agxsf Height: 47 cm Depth: 8 cm

Leto izdelave: 1996, stanje: rabljeno, številka stroja/vozila: A9611003/0100, Tehnični podatki: - Proizvajalec: Venjakob - Tip: VBS 1300 - Delovna širina: 1.300 mm Nwjdeyyyhuepfx Agxsf - Leto izdelave: 1996 - Stran upravljanja: leva - Električna nastavitev višine brusnih valjev - Konstantna višina mize, delovna višina 920±20 mm - Proizvajalec glav za krtačno brušenje: Flex Trimm - Število glav za krtačno brušenje: 2 kosa - Premer brusnih glav: 280/390 mm - Dolžina brusnega sredstva: 55 mm - Valj 1, zrnatost 240, valj 2, zrnatost 280 - Hitrost krtačnih glav: 100–1000 obr/min - Krtače poševno nameščene - S krtačno oscilacijo - Z vakuumskim trakom - Hitrost podajanja: 1,5 – 7,5 m/min - Moč motorja: 4 kW - Vgradna dolžina: 3.500 mm - Zelo robustno izdelan stroj - Barva: svetlo siva RAL 7035 - Skupna priključna moč: 16 kW - Teža: 2.740 kg

Leto izdelave: 2023, stanje: rabljeno, Prodajam skoraj novo CNC peskalno komoro Kufra 2 1300, proizvajalec SVC Italy, l. 2023, v uporabi od 12/2023, 100 % brezhibno delovanje, možnost preizkusa. Dimenzije: 5200x1300x2200 mm, masa 850 kg, največja višina peskanja 1300 mm, moč 3 kW, poraba zraka 1100 l/min/6 bar, 6 vgrajenih + 5 zunanjih zračnih filtrov. 3 načini peskanja – ročni, celopovršinski, avtomatski – 6 programabilnih con. Porabni material v vrednosti 2.000 EUR vključen v ceni! Nwodeyb Ibwspfx Agxef Proizvajalec: SCV system Model: KUFRA 2 1300 Serijska številka: 1257 Leto izdelave: 2023 Moč: 3 kW Napetost: 400 V Za vsa dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1967, skupna višina: 2.000 mm, skupna širina: 1.500 mm, skupna dolžina: 1.800 mm, Poids à vide : 3 000 kg - Année de fabrication : 1967 - Documentation disponible : Oui - Certificat CE présent : Non - Numéro de série : 2166 - Commande : Conventionnelle - Horizontal/Vertical : Verticale - Puissance [kW] : 4,5 - Nombre d’axes [pcs.] : 3 - Course axe X [mm] : 900 - Course axe Y [mm] : 220 - Course axe Z [mm] : 380 - Rotation axe B [°] : 360 - Longueur de table [mm] : 1300 - Largeur de table [mm] : 300 - Porte-outil : ISO40 - Puissance de la broche principale [kW] : 3,5 - Vitesse de broche min. [tr/min] : 40 - Vitesse de broche max. [tr/min] : 1360 - Dimensions pour le transport : 1800mm x 1500mm x 2000mm (L x l x H) - Poids transport [kg] : 3000kg - Nombre de colis de transport : 1 Njdpfjyym Risx Agxswf Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Stanje: rabljeno, skupna višina: 2.000 mm, skupna širina: 1.400 mm, skupna dolžina: 1.950 mm, Poids à vide : 3 000 kg - Documentation disponible : Oui - Certificat CE présent : Non - Commande : Conventionnelle - Course axe X [mm] : 1000 - Course axe Y [mm] : 220 - Course axe Z [mm] : 450 - Rotation axe B [°] : 360 - Longueur de table [mm] : 1300 - Largeur de table [mm] : 300 Nwedpfx Asyym Rcjgxsf - Vitesse de broche min. [tr/min] : 31,5 - Vitesse de broche max. [tr/min] : 2000 - Outils inclus : Oui - Dimensions de transport : 1950mm x 1400mm x 2000mm (L x l x h) - Poids de transport [kg] : 3000 kg - Colis de transport [nbre] : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA déductible pour les entreprises Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2011, skupna dolžina: 4.800 mm, skupna širina: 1.800 mm, skupna višina: 2.250 mm, Weight: 8,200 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 91898 - Control: CNC - Control system brand: HACO - Control system type: ATL 565 - Number of axes [pcs]: 3: Y1+Y2+X Nodsymlabepfx Agxewf - Press force [ton]: 100 - Max. working width [mm]: 3600 - Distance between uprights [mm]: 3300 - Throat depth [mm]: 250 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 120 - Crowning system: Mechanical - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4800mm x 1800mm x 2250mm (L x W x H) - Transport weight [kg]: 8200kg - Transport packages [pcs]: 2 Financial Information VAT: The quoted price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Lukas van Rossum