Oliver Fritz Gmbh & Co. Kg Peskanje Kontejner, Peskalna Hala nakup rabljenega (102.977)

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3352, RAMPF dozirna naprava z mešalnim sistemom MS-S (statični) Uporabljeni material: Rampf RAKU PUR 21-2080-1 komponenta A in komponenta B Dozirna glava je bila nadgrajena z Y-vozičkom. - Ročni pomični mehanizem za mešalni sistem - RAMPF mešalni sistem MS-S (statični) - Nadzor tlaka za komponenti A + B - Tlačna posoda za material 50 l za komponento A - Merjenje nivoja za komponento A + B - Kroženje materiala do dozirne črpalke za komponenti A in B - Evakuacija materiala za komponento A - Vakuumska črpalka 25 m³/h - Posoda za odpadke 60 l s cevjo -> Lovilne posode so bile zamenjane z mobilnimi posodami. - Voziček za posodo za odpadke ali spiranje Lrodpfx Aezgck Neamop - Ogrodje za posode/strojno ogrodje, trojno - Delovna miza cca 1.400 mm x 500 mm s ploščo - Prečrpovalna postaja za pokrovček sodčka komponente A - Prečrpovalna postaja za sodček s čepom komponente B - Dozatorsko krmiljenje (Siemens PLC-krmiljenje na osnovi S7-300) - Precizna batna dozirna črpalka za komponenti A in B - EKDP A komponenta 257 ccm - EKDP B komponenta 64 ccm --> 1 x rezervni EKDP A in EKDP B sta vključena. Ta sta bila pri Rampf celovito obnovljena v zameno (glej sliko). Opomba: Zalivna naprava se nahaja na naši lokaciji v Avstriji.

Stanje: dober (rabljeno), Leto izdelave: 1999, ESTA Spänesog-SB 8151, sesalnik za žagovino Visoko zmogljiv industrijski sistem za odsesavanje, proizvajalec ESTA, model Spänesog-SB 8151. Ta sistem je idealen za delavnice za odsesavanje žagovine in prahu (npr. pri obdelavi kovin ali lesa). Tehnični podatki naprave Proizvajalec: ESTA Apparatebau GmbH & Co. KG Ljdpfx Asznibwoamsrp Model/tip: Spänesog-SB 8151 Napetost (V): 400 V Moč (kW): 2,2 kW Intenzivnost toka (A): 4,6 A Frekvenca (Hz): 50 Hz Stopnja zaščite: IP 54 (zaščiteno pred prahom in brizganjem vode) Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Stroški mednarodne dostave na zahtevo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Analytik Jena GmbH+Co. KG TOC/TNb analizator, multi N C 3100 Model: multiNC3100 Stanje: Rabljeno Ledpezh Irusfx Aamsrp Tehnični podatki: 230V AC 50/60Hz 1000VA Splošno: Obratovalna temperatura: +10 do +35 °C (priporočljivo klimatiziranje) Maksimalna zračna vlaga: 90 % pri 30 °C Zračni tlak: 0,7–1,06 bara Temperatura shranjevanja: +5 do +55 °C Zračna vlaga pri shranjevanju: 10–30 % (uporabiti sušilo) Maksimalna obratovalna višina: 2000 m Dodatki: Dokumentacija Napajalni kabel IEC Programska oprema

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Analytik Jena GmbH+Co. KG visokoločljiv spektrometer z neprekinjenim virom za atomsko absorpcijsko spektroskopijo s PC, AAS ContrAA 700 Model: AASContrAA700 Stanje: Rabljeno Tehnični podatki: 230V AC 50/60Hz 2100VA Lrsdpfx Aaezh Iqwomop Splošno: Optični sistem Refleksijska optika z zaščitnim nanosom in optični sistem z neprosojno kapsulacijo Echelle - rešetkasti dvomonokromator z goriščno razdaljo F=380 mm in nastavljivo vmesno režo; predmonokromator s kremenovim prizmom. Izbira valovne dolžine prek zrcalno vstavljenega neonskega dodatnega oddajnika. Območje valovnih dolžin: 185-900 nm Spektralna pasovna širina: 2 pm pri 200 nm Dodatna oprema: Dokumentacija/priročnik PC (Windows 7), monitor, miška, tipkovnica, povezovalni kabli 5x IC standardna cev 407-A81.011 3x grafitni pipetni vložki 407-A81.020 Set varovalk contrAA Mast za tesnilne obročke 2x nastavek 702-A81.233 1x nastavek 702-A81.234 1x zbirna posoda 407-110.499 4x transportni ročaji

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, TRUMPF Hüttinger GmbH + Co. KG RF generator 13,56 MHz, 20 kW, 1880203, TruPlasma RF 3020 Model: 1880203 Lrodpfx Aouykf Ajamsp Tip: TruPlasma RF 3020 Tehnični podatki: 400V-480V 50/60Hz 41,8A-34,5A 20 kW

Stanje: zelo dobro (rabljeno), Postaje/oprema: Odvijalnik Navijalnik Odsesovalni sistem z drobilnikom (4x Lundberg Tip WT200-200U – l. 2018) Inertna ohišja Enota za laminacijo zbiralne letve Rezalne enote Laminirne enote / enote za nanašanje lepila Ogrevani valji Centralni računalnik Krmilne omare Pogonski motorji Portalni žerjav Lrodpfx Asxzufhsamep Corona obdelava

Leto izdelave: 2020, obratovalne ure: 2.500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 26858, Na prodaj je celoten komplet. Komplet obsega naslednje enote: Stroj za izdelavo pelet 33-390 – mere so navedene v prilogi. Pretok znaša do 500 kg/h – odvisno od materiala in gostote materiala. Pogon: motor 30 kW. Matrica ima premer 3,0 mm. Rezervni deli: 4 matrice in 2 valja. Ledpfxszl Tlzo Aamjrp Transportni sistem: Z-transporter – transporter z vedri, širina tirnice 298 mm, proizvajalec Wiese Förderlelemte, v sodelovanju z Amandus Kahl. 3400 mm vodoravno na dnu, 5300 mm navpično in nato 2340 mm vodoravno. Priložena je tehnična risba. Hladilnik materiala (poz. 1): je valj z ventilatorjem, ki vpihuje zunanji zrak v stožec, prostornina približno 1 m³. Sito za pelete (poz. 2) / sito za ločevanje, proizvajalec Gough Engineering, za ločevanje drobnih delcev, prevelikih pelet in klasifikacijo izdelka. Velikost sita 3,2 mm. Električna omarica: je vključena. Osnovno upravljanje (brez močnostne elektronike) je izdelano pri Kahl in ustreza standardom CE na dan proizvodnje. Močnostni del je izdelan v Izraelu in morda ne ustreza standardom CE. Obe električni omarici sta vključeni, uvedba v obrat in skladnost z vsemi predpisi sta odgovornost prodajalca. Stroj je bil v uporabi v raziskovalnem in razvojnem centru v Izraelu. Ker podjetje zdaj izvaja proizvodnjo v Evropi, se raziskovalni in razvojni center zapira. Stroji bodo na stroške lastnika prepeljani v Evropo in jih je mogoče prevzeti v pristanišču ali v proizvodnem obratu v Evropi, po načelu EXW. Podrobnosti za optimalen transport je treba dogovoriti. Cena stroja je brez embalaže na paleti.

Stanje: dober (rabljeno), Indumat THO 310, vozilo za avtonomni transport Robustno, industrijsko vozilo za avtonomni transport (VAT) iz preizkušene serije sistemov INDUMAT in E&K Automation. Vozilo združuje izjemno trpežno in dolgo obstojno mehaniko Indumata s prilagodljivo tehnologijo upravljanja serije TELETRAK MULTI. Naprava je idealna za uporabo kot nosilec rezervnih delov, za projekte nadgradnje, za avtomatizacijo lastnih procesov v hali ali za razširitev obstoječih sistemov. Tehnični podatki (glede na oznako na napravi): Proizvajalec (mehanika): INDUMAT GmbH & Co. KG (Reutlingen) Sistem za upravljanje / znamka: E&K Automation TELETRAK MULTI Model / tip: THO 310 Serijska številka: 9930 92 26844 Leto izdelave: 03 / 1993 Nosilnost: 1000 kg Lastna teža (brez baterije): 2720 kg Nazivna napetost baterije: 48 V Oprema in komponente: Vozila so bila kasneje nadgrajena z modernimi upravljalnimi elementi z zaslonom na dotik in so v dobrem, čistem stanju. Ta vozila so sestavljena iz izjemno dragocenih, zaželenih industrijskih komponent v kakovosti originalne opreme. Profesionalni varnostni laserski skenerji: vrhunski senzorji za zaznavanje oseb in ovir. Pripomoček za dvig tovorov: integriran, pogonjen valjčni transporter s tremi vodilnimi valji za samodejno, osrednjeno prevzemanje in predajo specifičnih nosilcev tovorov (npr. palet ali posebnih okvirjev). Upravljanje in HMI: stransko nameščena upravljalna plošča z zaslonom, ključem, funkcijskimi gumbi, kontrolnimi lučmi in priključkom za žični ročni upravljalnik. Varnostne naprave: lahko dostopen gumb za izredno ustavitev; priprave (izrezi) na odbijaču za optične skenerje za zaščito oseb (npr. laserski skenerji SICK) ali mehanske varnostne letve. Električna omarica: prostorna, lahko dostopna elektronska omara v zgornjem delu ohišja, dostopna preko zaklenljivih dvojnih vrat, za centralno upravljanje. Lrsdjzkqdxopfx Aamop „Vse na enem mestu: z veseljem vam ponudimo ustrezno financiranje prek banke za vaš projekt.“ komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši trgovini! Mednarodne stroške pošiljanja dobite na zahtevo!

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Lsdpohfwcbofx Aamjrp Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: dober (rabljeno), WAGNER UGH-Z1-Q 1000 – avtonomni vodilni sistem Za prodajo so na voljo avtonomna transportna vozila (ATV/AGV) vrhunskega proizvajalca ek robotics (prej ek automation) na robustnih podvozijih WAGNER. Vozila so neposredno iz tovarne Mercedes-Benz, kjer so bila uporabljena za natančen in avtomatiziran transport materiala. Zaradi uporabe v avtomobilski industriji so bila ta vozila redno vzdrževana po najvišjih standardih kakovosti in varnosti. Lrodpfezklktjx Aamep Pozneje so bila vozila nadgrajena z modernimi krmilniki z zaslonom na dotik in so v dobrem, čistem stanju. Ta vozila so sestavljena iz izjemno dragocenih in zaželenih industrijskih komponent v kakovosti originalnega proizvajalca. Profesionalni varnostni laserski skenerji: vrhunski senzorji za zaznavanje oseb in ovir. Idealna priložnost za logistična podjetja kot visokokakovosten vir rezervnih delov za obstoječe sisteme, za trgovce z rezervnimi deli ali za ambiciozne projekte avtomatizacije. Tehnični podatki Proizvajalec podvozja: WAGNER Fördertechnik GmbH & Co KG Model/tip: WAGNER UGH-Z1-Q 1000 Nazivna nosilnost: 1.000 kg Skupna teža (vključno z baterijo): 2.980 kg Napetost sistema: 48 V »Vse na enem mestu: z veseljem vam ponujamo ustrezno bančno financiranje za vaš projekt.« komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Leto izdelave: 2015, stanje: rabljeno, Nevtralizacija odpadne vode Kapaciteta: 8 m³/h Upravljanje / Krmiljenje: Stikalna omara z zaslonom na dotik / WAGO Ljdjxbqr Depfx Aamjrp Oprema: Nevtralizacijska posoda (37 hl); Končna kontrolna posoda (4,5 hl); Posoda za lug; Posoda za kislino; Črpalke; Merilna, senzorska in regulacijska tehnika; Stikalna omara

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Ljdpfovcqy Usx Aamsrp Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Control / Operation: Control cabinet with push-button operation Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t Lrjdpoyzxfnefx Aamop - Sound emission: average sound pressure level 79 dB (A)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t Ljdpfju Tha Iox Aamerp System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Ljdpfx Aasu Thh Eemsrp Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Lrjdpfxoy Ta Alo Aamjp Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.

Stanje: dober (rabljeno), Leto izdelave: 2019, Mössner Rekord SSF 801 tračna žaga Najzmogljivejša tračna žaga Mössner – uporablja se povsod tam, kjer so zahtevane najvišje zmogljivosti. Absolutna zastavonoša med navpičnimi visoko zmogljivimi tračnimi žagami. Ta stroj zagotavlja maksimalno natančnost, izjemno miren tek in brezkompromisno dolgo življenjsko dobo pri neprekinjeni industrijski uporabi. Osnovna oprema tračne žage: - Nosilec tračne žage iz stabilne sive litine - Hitrosti rezanja nastavljive preko frekvenčnega pretvornika in trifaznega motorja s potenciometrom - 2-stopenjski menjalnik ali brezstopenjsko nastavljive hitrosti rezanja s prirobnico in frekvenčnim pretvornikom - Ročni napenjalni mehanizem z hidravličnim prikazom - Nagibna delovna miza – desno do 30°, levo do 15° - Izmenljiva aluminijasta kolesa z oblogo iz trde gume - Zgornje kolo nastavljivo - Varnostno stikalo na vratih kolutov - Barva: RAL 7035 svetlo siva, vrata RAL 5005 signalno modra Tehnični podatki: Proizvajalec: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Premer koles: 800 mm Najv. širina reza (izteg): 785 mm Najv. višina reza: 670 mm (opcijsko razširljivo do 800 mm) Velikost mize: 960 × 1000 mm Najv. obremenitev mize: 750 kg Moč motorja: 11 kW Lodpfx Aezc Uvwjamorp Hitrost rezanja z menjalnikom: 26 – 180 m/min in 290 – 2000 m/min Hitrost rezanja s prirobnico: 500 – 2000 m/min Teža stroja pribl.: 2.300 kg Dimenzije (D x Š x V): 2240 x 1080 x 2900 mm Leto izdelave: 2019 Nova cena: 54.000,- € "Vse iz ene roke: z veseljem vam ponudimo tudi ustrezno bančno financiranje za vaš projekt." komplett-konzept.leasingo.de Oglejte si še ostale izdelke – nove in rabljene – v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER Lrjdpfx Aeu Hl R Teamjp (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Ledpfxjyt Nm So Aamsrp Vacuum pump for surface gantries Punching unit

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Lsdpsu Ul A Njfx Aamjrp Including 1/4" tripod thread mount

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° Ledpjng Exaefx Aamorp • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch Lredjndn Agepfx Aamsp OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm Ljdpfx Aonh R Ekjamjrp • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. Lsdpfonfvx Nox Aamjrp The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Lrodpfx Aondk N Aeamop Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site