Okuma Multus B300W X 900 nakup rabljenega (65.845)

Stanje: dober (rabljeno), Roller conveyor, roller track, driven roller conveyor, roller path Fodpfx Anjv Hapyofopg - Roller conveyor: driven, with sensor switch / without control unit - Drive motor: 0.37 kW - Speed: 18 m/min - Roller width: 900 mm - Roller diameter: 64 mm - Axle spacing: 180 mm / adjustable - Conveyor length: max. approx. 2630 mm - Overall dimensions: 2700/970/H535 mm - Weight: 222 kg

Stanje: dober (rabljeno), Clamping table, angle plate, T-slot table, rotary table, milling machine table Fsdpforbm Udex Anfopg - Manufacturer: Mikron, milling machine table / T-slot table from CNC machining center UME 600 - Table surface: 530 x 900 mm - T-slots: slot width 14 mm, slot spacing 63 mm - Transport dimensions: 900/530/H390 mm - Weight: 248 kg

Stanje: novo, Swing diameter over bed: 320 mm Swing diameter over cross slide: 200 mm Turning length: 900 mm Swing diameter in gap: 320 mm Spindle speed: 75 - 2000 rpm Centre height: 160 mm Spindle bore: 38 mm Tailstock quill taper: MT 3 Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m SINO digital readout 3-jaw chuck 160 mm 4-jaw chuck 160 mm Faceplate 250 mm Fixed steady rest Fpodpehwavrjfx Anfeg Quick-change tool post with 4 tool holders Machine lamp Chip tray, chip guard Hardened and ground bed ways Chuck guard Machine tools

Stanje: novo, Premer struženja nad posteljo 320 mm Premer struženja nad suportom 200 mm Dolžina struženja 900 mm Število obratov 75 - 2000 U/min Višina konic 160 mm Vrtina vretena 50 mm Držalo konjička MK 3 MK Priključna napetost 230 V Skupna potrebna moč 1,5 kW Teža stroja pribl. 0,29 t Prostorske zahteve pribl. 2,0 x 0,8 x 1,56 m Profesionalni stružni stroj 3-čeljustna vpenjalna glava 4-čeljustna vpenjalna glava Planski disk Fiksna luneta Sledeča luneta Hitromenjalno držalo za orodje s 4 kasetami Halogenska strojna svetilka Kad za ostružke, zaščitna stena Kaljeno in brušeno ležišče postelje Popoln hladilni sistem Zaščita vpenjala Strojna orodja Fodonq Sayspfx Anfspg Sledeča konična špica

Stanje: dober (rabljeno), - 1 pc. Metso / Lokomo MK 120 Jaw Crusher (1,200 x 900 mm). With feed hopper. With drive unit. Includes spare parts: pitman, flywheels, jaws, side wedges, bearings, springs, etc. Fpedpfx Anjlf Iqcjfsg For more detailed information, please refer to the PDF below.

Stanje: rabljeno, Rabljeno tristopenjsko sito iz nerjavečega jekla Cuccolini model VPM900 2/X. Premer sita približno 900 mm. Enota ima vibratorni motor BOMEC z močjo 0,73 kW, 1440 vrt/min. Teža: ocenjena: 200 kg Dimenzije: 1100 mm x 1100 mm Fedpoygvncsfx Anfspg Opremljeno z: Vgrajenima mrežama s pladnjem za kroglice 300 mikronov in 500 mikronov. Priložena je lahko tudi rezervna mreža s pladnjem za kroglice 710 mikronov.

Stanje: rabljeno, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Base width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Finish: galvanized Fodpfx Aouba Rbjnfepg • Condition: used Large quantities available immediately. Tiered net prices per unit plus VAT: Starter bays: • 1 - 5 bays: €136.90 net per unit • 6 - 20 bays: €132.94 net per unit • 21 - 50 bays: €128.98 net per unit • from 51 bays: €125.02 net per unit Add-on bays: • 1 - 5 bays: €94.00 net per unit • 6 - 20 bays: €89.30 net per unit • 21 - 50 bays: €84.60 net per unit • from 51 bays: €79.90 net per unit Available from stock in Nordhorn. YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at additional cost. Additional costs depend on the delivery location and shipment size and can be requested individually from us. TERMS OF PAYMENT Payment terms are to be agreed in the event of an order. The price is quoted as a unit price/net price or as stated in the description (plus VAT). Of course, you will receive an invoice including VAT. ABOUT US The company DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands under favorable conditions. If you have any questions, please contact us. Four Wins – The Success Modules of DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: dober (rabljeno), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical specifications for workbench frame: Manufacturer: Jung Heinrich Fjdpfx Ajlnfi Renfjpg Type: T Scope of delivery includes: 02x Workbench uprights, used Color: blue Upright height: 1,000 mm Upright depth: 1,100 mm Upright profile: 100 x 65 mm Including cross and diagonal braces, base plates Uprights are pre-assembled (welded lattice structure) 02x Workbench beams, used Color: yellow Box profile: 120 x 50 mm Beam type: HN 120|25 Clear span: 2,700 mm 04x Safety pins, used Finish: fully galvanized 01x Particle board, 2nd grade, used Thickness: 38 mm Width: 2,900 mm Depth: 1,100 mm Boards may be supplied in two parts, if applicable 08x Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm The images are for illustration purposes. Material color may vary. - Workbenches are picked and shipped unassembled; - Workbench uprights are pre-assembled; - Usual production time is approx. 3 - 5 working days.

Stanje: dober (rabljeno), This robust workbench is ideal for DIY enthusiasts and professionals who require a stable work surface with ample storage. The worktop consists of a 38 mm chipboard covered with a high-quality edged sheet metal plate, providing a solid base for any type of project. Beneath the worktop is a shelf unit with 12 drawers (6 drawers per side), offering plenty of storage for tools, materials, and accessories. Scope of delivery: 01x Workbench, used/new System: SSI Schäfer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm comprising: 02x Workbench stands, second choice (new) Material finish: Sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted lattice structure) 02x Workbench beams, new Material finish: blue Box section: 110 x 40 mm Clear width: 2,700 mm 04x Safety pins, used Finish: fully galvanized 01x Chipboard, used Dimensions: 2,900 x 800 x 38 mm possibly two-piece 08x Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 01x Steel cover plate, new Material finish: Sendzimir galvanized Dimensions: 2,900 x 800 x 40 x 1 mm 01x Shelving unit, second choice - incl. drawers - System: SSI Schäfer Type: R 3000 comprising: Fpedpfxjmrqk Rj Anfsg 12x ESCH 9420 incl. drawers, second choice 12x Side panel SBL-ESCH 4200, pair, first choice 06x Frame 400 x 735 mm, second choice 06x Frame connector RV 3006, first choice 08x Longitudinal brace LV 3133, first choice 08x Intermediate shelf ZB 9415 V, first choice Note: The workbench is delivered unassembled. The shelving unit is pre-assembled for delivery.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering here a used pallet rack beam from the manufacturer Nedcon for sale. Technical data of the pallet rack beam: Racking system: Nedcon Type: NS Fpodjd A Sm Topfx Anfsg Currently available: approx. 5,000 pieces Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 2008 Light Red Orange Box profile: 90 x 40 mm Hook type: 4 hooks Clear span: 1,900 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 02x Locking pins, used Version: fully galvanized For securing the beams against unintentional lifting Overview of our services: (Prices on request) Assembly and installation Please note our general assembly terms and conditions Racking inspection Inspection according to DIN EN 15635, carried out according to BGR 234 requirements Visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: novo, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Standard technical specifications: Fpjdpfxey H H Afs Anfjg Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Max. machinable diameter: 360 mm Max. workpiece length: 250 mm Travel (X axis): 260 mm Travel (Z axis): 350 mm Travel (Y axis): 100 mm (+/-50 mm) C axis: 360° (0.001° incremental) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tool stations: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC controller including CE mark & EMC 1 set ‘European Standard Specification’ 1-1. V12 radial turret head 1 set 1-2. Spindle 1 set (1) Spindle speed, 50-6,000 rpm (1 set) (2) Spindle motor Prex 11/7.5 kW (1 set) (3) Spindle nose: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001° incremental) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Double-acting foot pedal for chuck and tailstock side 2 sets 1-5. Driven tool motor, PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed, 45 - 6,000 rpm 1 set 1-7. Work area lighting 1 set 1-8. Full enclosure 1 set 1-9. Chip tray 1 set 1-10. Door interlock 1 set 1-11. Lubrication monitoring 1 set 1-12. Automatic chuck open/close on main spindle 1 set 1-13. Air blast for chips 1 set 1-14. Base bolts 1 set 1-15. Tool setter 1 set 1-16. CE marking 1 set 1-17. IEC standard compliance 1 set 1-18. Transformer 1 set 1-19. Coolant system with 250W pump 1 set 1-20. OSP-P300L CNC control with 15” color touchscreen monitor 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant, dialogue-based programming interface) (1 set) * Real 3D simulation (1 set) * Cycle time checking (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-related servo optimization) (1 set) * Variable spindle speed control (1 set) 1-22. 2-level status indicator lamp 1 set 1-23. Program storage 2GB 1 set 1-24. Operating memory: 2MB 1 set 1-25. Spindle orientation, electric 1 set 1-26. Inch/metric switching 1 set 1-27. Ball screw pitch error compensation on X/Z axes 1 set 1-28. Workpiece ejection monitoring 1 set 1-29. Lifting lugs 1 set 1-33. TAS-C thermal compensation on machine frame 6” chuck Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, stružna dolžina: 565 mm, izvrtina vretena: 80 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, največja hitrost vrtenja: 6.000 obr/min, skupna višina: 1.824 mm, skupna dolžina: 2.800 mm, skupna širina: 1.790 mm, CNC Lathe with C Axis Fpedpfoywurpsx Anfsg Okuma - LB3000EX-II MACH-ID 9471 Manufacturer: Okuma Model: LB3000EX-II Control: OSP-P300LA Year of manufacture: 2018 Tool package with tool holders Axially driven tool holders Radially driven tool holders Kitagawa B210 3-jaw power chuck Max. turning diameter: 580mm X-axis travel: 260mm Z-axis travel: 565mm Spindle bore: 80mm Spindle speed: 5,000 rpm Spindle power: 22 kW Tool changer: 12 positions Driven tool speed: 6,000 rpm Chip conveyor: Yes Tool Eye: Yes Operating hours: 4,566h Tailstock quill taper: 5MT Length: 2,800mm Width: 1,790mm Height: 1,824mm Weight: 4,350kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend you verify all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Fpjdpfx Anjwq Rpwefjg Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 995 mm, izvrtina vretena: 80 mm, Maksimalni premer struženja: 530 mm Fpedpfxox I Nbto Anfeg Os X: 260 mm Os Z: 995 mm Vretenina odprtina: 80 mm Hitrost vretena: 5000 vrt./min Moč vretena: 22 kW Hitrost protivretena: 6000 vrt./min Premer prehoda protivretena: 62 mm Moč protivretena: 11 kW Menjalnik orodij: 12 pozicij Hitrost pogonskih orodij: 6000 vrt./min Tool Eye: da Delovne ure: 2800 h Dolžina: 3000 mm Širina: 1800 mm Višina: 1900 mm Teža: 6350 kg Opozorilo: Podatki na tej strani so bili po najboljšem vedenju zbrani z naše strani in, kjer je bilo mogoče, od proizvajalca. Podatki so predstavljeni v dobri veri, vendar natančnost ni zagotovljena. Podatki ne predstavljajo pravne podlage ali zavezujočih pogojev. Priporočamo, da vse pomembne podatke pred nakupom preverite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, stružna dolžina: 700 mm, potovalna razdalja osi X: 205 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 3.900 mm, skupna masa: 9.800 kg, Complete machining with double spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg load capacity Chip conveyor Paper band filtration system with pressure tank Max. turning diameter: 400mm X-axis travel: 205mm Z-axis travel: 700mm Spindle bore: 62mm Spindle speed: 6000 RPM Spindle power: 22kW Sub-spindle speed: 6000 RPM Sub-spindle through hole: 62mm Sub-spindle power: 15kW Fpsdpfx Anjyn Em Refeg Tool changer: 16 positions Driven tool speed: 6000 RPM Lower turret positions: 16 Driven tool speed: 6000 RPM Driven tool power: 7kW Chip conveyor: yes Tool Eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, however, accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract terms. We recommend that you verify all key details yourself.

Stanje: rabljeno, Leto izdelave: 2000, Pomik X 1.050 mm Pomik Y 560 mm Pomik Z 450 mm Krmiljenje OKUMA OSP-U100M-H Fodpfsy Rakksx Anfspg Mere mize 1.300 x 560 mm Število vrtljajev vretena 10.000 min⁻¹ Vpenjalni stožec BT 40 Stroj je po naši oceni v dobrem rabljenem stanju in si ga je po dogovoru možno ogledati pod električno napetostjo. Pribor, prikazana orodja in vpenjalne naprave so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predprodaje!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA Fpedpfx Aex D S Eksnfog • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 1.000 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.100 kg, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 24, število osi: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal lathe we have for sale. Contact us for further details. • OKUMA OSP P200L control system • OSP-P200 control • 12-station radial tool turret • Turret with 12 stations • Number of turrets: 2 • Toolholder: BMT 60 • Number of tools: 24 • Power of driven tool stations: 7.1 kW • Torque of driven tool: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Y-axis travel: mm (unspecified) • X-axis travel: 200 mm • Z-axis travel: 1000 mm • Hydraulic Y-axis clamping • Sub-spindle with W-axis • Twin-spindle configuration Fjdpsy Ddtvjfx Anfjpg • Main spindle bore: 110 mm • Spindle bore approx. 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 4200 rpm • Main spindle drive: VAC 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 360 mm • Programmable chuck pressure (2 stages) • Thread milling interpolation X/Y and Z/Y axes • Programmable workpiece ejector • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter system • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction nozzle diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Clamping range: 42-100 mm • Manual collet change device • Sub-spindle stroke: 150 mm • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor: PVC with PU coating • Hydraulic clamping cylinder: 52 mm bore • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: approx. 6100 kg • Maintenance contract: yes • Utilization: 60% Additional Equipment • Bar feeder • Optionally, for an additional charge: approx. 200 tools available, collets, power tools Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 3.900 mm, število osi: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a center distance of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45-5000 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LB3000 EX horizontal lathe that we are offering for sale. Contact us for further details. • OSP-P200 control system • 12-station radial tool turret • Turret with 12 driven tools • Number of turrets: 1 • BMT 60 toolholders • Number of tools: 12 • Number of available tools: approx. 200 Fjdpfxoy Aaxrs Anfjpg • Power at driven tool stations: 7.1 kW • Driven tool torque: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Sub spindle with W-axis • Main spindle bore: 110 mm • Spindle bore: 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 45-5000 rpm • Main spindle drive: 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 340 mm • Center distance: 1020 mm • Programmable chuck pressure (2-stage) • Thread milling interpolation X/Y and Z/Y axes • Programmable parts catcher • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter unit • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction port diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range: 42-100 mm • Manual collet change device • Sub spindle stroke: 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor PVC with PU coating • Hydraulic clamping cylinder bore: 52 mm • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: 4000-6000 kg • Maintenance contract: yes • Utilization: high OPTIONAL at extra cost: Approx. 200 tools available The electrical maintenance was carried out 1.5 years ago. During this, some electrical components were replaced or cleaned. Technical Specification: Counter Spindle: No Driven Tools: Yes

Stanje: rabljeno, Leto izdelave: 2008, CNC stružnica Okuma LB3000 EX letnik 2008 z gnanimi orodji in krmilnikom Okuma OSP-P200L Maks. premer struženja: ø340 mm. Maks. dolžina struženja: 1.000 mm. Premer nad posteljo: 580 mm. Premer nad suportom: 470 mm. Premer vretena: ø80 mm. Kapaciteta vretena: ø120 mm. Hitrost vretena: 45–5.000 vrt/min. Os Z: 1.065 mm. Os Y: 260 mm. Revolver: 12 postaj (vse gnana orodja). Hitrost gnanih orodij: 45–6.000 vrt/min. Os C: 360° indeksiranje. Konica: MT5. Moč vretena: 22 kW. Serijska št.: 141960 (2008) Fpodpjy Dr I Iofx Anfog Teža stroja: 6.150 kg. Skupne mere (D x Š x V): 3.500 x 1.900 x 2.000 mm. Vključen transporter za odrezke: pribl. 4.700 x 600 x 1.500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezkalni center Okuma LT 2000 EX -MY 2ST Krmilnik: OSP-P300L Fpodpsyvfhdsfx Anfog Letnik: 2013 Interna št. stroja: 24 Premer struženja nad posteljo: 400 mm Razdalja med konicama: 960 mm Premer struženja: 210 mm Hitrost vrtenja: 50 – 6.000 obr/min Hitrost protivretena: 50 – 6.000 obr/min Pomiki: W-os: 730 mm X-os: 205 mm C-os: 360 stopinj (0,001) 2 kosa revolverskih glav z 16 mesti vsaka (vsa mesta gnana) Oprema: - Transporter za ostružke - Filtrirna naprava s papirnatim trakom in visokotlačno črpalko - 2x 3-čeljustni vpenjalni tulec Kitagawa - OGL portlni nalagalnik s pribl. 5 kg nosilnosti - Skladiščni magazin s 20 mesti - Touchsetter - Merilna sonda Renishaw - Odsesovalna naprava - različna dodatna oprema

Stanje: rabljeno, OKUMA LB 2000 EX je CNC stružnica, zasnovana za visoko natančnost, točnost in zanesljivost. Zmogljivosti: vreteninska odprtina 62 mm; maks. dolžina struženja 300 mm; maks. premer struženja 430 mm; pomiki Z 350 mm, X 260 mm. Tehnični podatki: hitri pomik Z 30 m/min, X 25 m/min; brezstopenjsko območje vrtljajev vretena 50–6000 min⁻¹; priključek 50 Hz 3x 400 V; masa ≈3250 kg; dimenzije D1900׊1750×V1850 mm. Oprema: revolverska glava z 12 pozicijami. Omogoča obdelavo v ozkih tolerancah; tipične industrije: avtomobilska, letalska, medicinska tehnika, urarstvo, strojništvo. Fpedpfx Anoyxnxfsfsg

Stanje: rabljeno, Leto izdelave: 2014, OKUMA - LB3000 EXII - 2014 - krmilni sistem OSP-P300L CNC s 15" barvnim zaslonom na dotik - čas vklopa: 65.458 h - na dan 18.03.2026 NC čas v delovanju: 36.054 h - čas vrtenja vretena: 19.533 h - čas rezanja: 16.582 h - poraba energije: 33,1 kVA Tehnični podatki - maks. premer vrtenja: 480 mm - maks. obdelovalni premer: 340 mm - maks. dolžina struženja: 785 mm - vpenjalna glava + 10'' hidravlični vpenjalni tulec B210-A06-01, 3x mehke čeljusti (Schunk KM-WBL 103) - 1x trde čeljusti (Schunk SHB-J 100) - hidravlični prehodni tulec SS 1770, vpenjalna cev Glavno vreteno - vreteno z JIS A2-6 koncem, izvrtina 80 mm, integrirani motor - območje hitrosti: 45 - 5.000 min⁻¹ - 22 kW/15 kW - kontinuirano krmiljena C-os, 360° z inkrementi 0,001° Protipretensko vreteno - območje hitrosti: 50 - 6.000 min⁻¹ - 11 kW/7,5 kW - vreteno z končnim premerom 140 mm, izvrtina 62 mm, integrirani motor - kontinuirano krmiljena C-os, 360° z inkrementi 0,001° - vpenjalni tulec + 6'' hidravlični vpenjalni tulec B206-01, 3x mehke čeljusti (Schunk KM-WBL 62) - hidravlični prehodni tulec SS1243, vpenjalna cev - pomik drugega vretena - NC os W, hod W450: 595 mm - vzmetni izmetalec kosa iz proti vretena - nadzor preobremenjenosti osi W (navor pogona) Centrično vpenjanje (konjiček) na drugem vretenu Revolver glav - število orodnih pozicij: 12, fiksnih in gnanih BMT60 (ne VDI) - notranje vpenjanje orodja: 25 x 25 mm - zunanje vpenjanje orodja: 40 mm Gnjena orodja - moč pogona: 7,1/4,1 kW Fedpsyzkn Usfx Anfjpg - območje hitrosti: 45 – 6.000 min⁻¹ Hitrosti pomika - hitro premikanje v oseh X in Z: 25/30 m/min - hitro premikanje v osi C: 200 min⁻¹ Pomiki - os X: 260 mm - os Z: 510 mm - os Y: 115 mm (+70 mm / -45 mm) Podatki o stroju - širina: 3330 mm – brez podajalnika in transporterja - globina: 1800 mm - višina: 2250 mm - masa stroja: 5.250 kg Dodatna oprema: Komplet OSP-P300L Advanced One Touch CF-M-E, vsebuje: - funkcija koordinatne transformacije - funkcija generiranja profilov - napredni One Touch IGF - simulacija 3D obdelovalnega procesa - nadzor prekoračitve obdelovalnega časa - nadzor obremenitve (vreteno, podajalne osi) - nadzor delovanja NC (vključno s štetjem kosov) - funkcija skrajšanja cikel časa - Hi-Cut Pro funkcija - funkcija nadzora hitrosti vretena - visoko-tlačno hlajenje, maks. 20 bar, maks. 50 l/min - podajalnik materiala ILS tip MUK 7012 s paletnim magazinom 6-70 mm/1250 mm, letnik 05/2014, proizvajalec Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - izsesavanje FILTERMIST FX4002 Oprema stroja: - držalo za vpenjalni tulec: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (trenutno na glavnem vretenu) - tuleci premer (mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - vpenjalni tulec z utorom premer (mm) 55-60-65 - držalo za vpenjalni tulec: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (trenutno na drugem vretenu) - tuleci premer (mm): 6-28, 30-32, 34-36, 39-41 Držala: - aksialno držalo - 5x - nožno držalo - 5x - držalo na rezilu - 2x - prednji dvostranski narezovalec - 3x - prečni narezovalec - 3x - redukcijska vstavljiva cev (serijska proizvodnja) - reducirke – silon premer (mm): 12-14-15,5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Glavni pogon Število osi: 3 Hitrost vretena: 5000 obr/min Moč motorja vretena: 22 kW Premik Pomik osi X: 260 mm Pomik osi Z: 1010 mm Fpodpfjx Imqfjx Anfog Pomik osi Y: 120 mm Tehnične specifikacije Pogonska orodja: da To troosno stružno-rezkalno središče Okuma LB 3000 EX je bilo izdelano leta 2011. Omogoča maksimalni premer struženja 340 mm, dolžino struženja 950 mm ter hitrost vretena do 5.000 obr/min. Stroj je opremljen z revolversko glavo za 12 orodij in podpira hitrosti pogonskih orodij do 6.000 obr/min. Če iščete vrhunske sposobnosti struženja in rezkanja, razmislite o stroju Okuma LB 3000 EX, ki ga imamo v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC stružnica Okuma LU 3000 EX MY 2SC950 Krmilnik: OSP-P300 Leto izdelave: 2014 Interna številka stroja: 27 maks. stružna dolžina: 950 mm maks. stružni premer: 340 mm maks. stružni premer nad sani: 380 mm maks. stružni premer nad posteljo: 580 mm maks. število vrt./min: 4.200 Nosilec orodij: BMT 2 kosa revolverskih glav A-revolver: 12 orodnih mest (vsa gnana) B-revolver: 8 orodnih mest Konjiček Transporter za ostružke Hidravlični vpenjalni tulec B210/A8 Touchsetter Visokotlačna črpalka za hladilno tekočino Povečan rezervoar za vodo Fsdpsyluvisfx Anfjpg