Mg20B Prenosni Stroj Za Upogibanje Jekla Za Ojačitev nakup rabljenega (95.238)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer valja: 200 mm, dolžina valja: 2.000 mm, delovna širina: 2.000 mm, najv. debelina jeklene pločevine: 8 mm, vrsta vhodnega toka: trifazni, delovna dolžina: 2.000 mm, Hydraulically Operated Four-Roller Plate Bending Machine Manufacturer: BIKO, Model B4 2020 Technical Data: Number of rollers: Four Side roller geometry: Linear guides Working width: 2,000 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Side roller diameter: 160 mm Rated installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Bending Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,000 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 4 mm From tube diameter: 265 mm Standard Features: Linear guide system for roller movement Extra wide bearing blocks Needle bearings for roller rotation Extra heavy-duty, double-supported drop end bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side roller and lower roller positioning Cone bending device Control via swivel-mounted operator panel Ibedpfxjd Iclrs Adgja Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Ibsdegd T R Depfx Adgoa Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3293 Plate Width: 3200 mm Top Roll Diameter: 930 mm Side Roll Diameter: 800 mm Machine Weight: 150 tons Rolling Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 155 mm Ijdpfxsiivg So Adgsba Pre-bending Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 115 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS Ibodpet Akxasfx Adgja - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, premer spodnjega valja: 160 mm, premer zgornjega valja: 175 mm, premer stranskega valja: 135 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 7 mm, moč: 4,4 kW (5,98 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Electronically Controlled, Electrohydraulic Four-Roll Plate Bending Machine Manufacturer: FACCIN, Model: 4 EDL 1617 Technical Specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 1500 mm Top roll diameter: 175 mm Bottom roll diameter: 160 mm Side roll diameter: 135 mm Press force against top roll: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Iodpfx Adowwt Ddjgeba Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: With material yield strength 260 N/mm² Rolling capacity (full width): 7 mm Prebending capacity (full width): 6 mm From pipe diameter: 875 mm Rolling capacity (full width): 5 mm Prebending capacity (full width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roll movement Extra wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported swing arm bearing Electronic Parallelism System EPS Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens PLC control Electric drive for top roll to increase efficiency Safety emergency stop rope and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, New three-roll profile bending machine Roundo R3 with remote control, digital displays, and tooling. Ibsdod N Ahdopfx Adgoa

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3163 Ijdpfxsiivfqo Adgjba Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Ibsdpfxoiivc Dj Adgsa Lever arm movement of side rolls Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, število valjev: 3, premer gredi: 35 mm, največja hitrost vrtenja: 30 obr/min, skupna masa: 490 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, BPR BA 35 CNC Three-Roller Ring Bending Machine, Hydraulic Technical Data: Ibedpfxewwt Hfs Adgsa - Shaft diameter: 35 mm - Roller diameter: on request - Shafts made from high-strength steel, hardened and ground - Drive motor: 1.1 kW, 50 Hz - Hydraulic pump motor: 3 kW - Shaft rotations (variable): 0-30 rpm - Working position: horizontal and vertical - Separate control console - External dimensions: 740 x 1020 x 1110 mm - Control console dimensions: 600 x 710 x 1120 mm - Weight: 490 kg - Hydraulic adjustment of lateral roller - Three driven rollers with smooth surface - Electronic control: BPR Probending CNC - Hydraulic cylinder pressing force: 5,500 kg - Working pressure: 190 bar Accessories included: - Rollers for 1" pipe - Straightening rollers - Operating keys - Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3162 Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Ibodpfxjiivgyo Adgoa Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: With material yield strength of 260 N/mm² Rolling capacity (full working width): 11 mm Pre-bending capacity (full working width): 8 mm From pipe diameter: 1,100 mm Rolling capacity (full working width): 8 mm Iodpfx Aod Eqg Hedgeba Pre-bending capacity (full working width): 6 mm From pipe diameter: 286 mm Standard equipment: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty swing arm bearing, double mounted Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Ijdpfeiink Sjx Adgoba Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Technical Data R-62 Standard roll diameter: 460 mm Central / side shaft diameter: 180 / 160 mm Motor power: 15 kW Rotation speed: 0-7 m/min Net weight: 8,000 kg Standard configuration R-62S: Ibsdpfx Aeiinllsdgja - Vertical working position - Hydraulically variable rotation speed on all three rolls via hydraulic motor - One motor for the top roll, one motor for the side rolls - Automatic speed compensation between top and side rolls - Hydraulic adjustment of the side rolls - Digital position indicators for the side rolls - Fully hydraulic adjustable guide rollers - SKF ball or roller bearings in all journals - Hardened, oil-lubricated gears - Pendant control panel with mini joysticks for all functions, complete with digital displays - Emergency stop mushroom push-button - Complete set of adjustment tools - Operation and maintenance manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, RCMI 280 Three-Roll Profile Bending Machine Technical Specifications: Section Modulus: 720 cm³ Main Shaft Diameter: 280 mm Lateral Shaft Diameter: 280 mm Outer Diameter of Bending Rolls: 720 mm Adjustable Rolling Speed: 0–4 m/min Installed Power: 44 kW (60 HP) Weight: 34,000 kg Standard Equipment: Hydraulic adjustment of lateral rolls 3 driven rolls (3 hydraulic motors + 3 planetary reduction gears) Independent, fully hydraulic lateral profile guide rolls, adjustable in 6 directions Automatic circumference and rotation speed compensation Complete universal roller set for standard profiles and beams (12 pieces) Tool set for machine equipment Iedpfxjiivhdj Adgsba Low-voltage control via mobile operator console Safety device in accordance with regulations Technical documentation and CE certificates Digital displays for the roll positions of the side rolls

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB10011N2025006, Stroj je še nerabljen! Ibodpfszuw D Tex Adgja TEHNIČNE PODROBNOSTI STROJA Nadzor: Učenje s programiranjem Moč motorja: 4,0 kW Dimenzije in teža Dimenzije (D x Š x V): 1.300 x 800 x 1.400 mm Lastna teža: 800 kg Transportni paketi: 1 kos OPREMA Dokumentacija Označba CE Certifikat CE

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: 19142, premer spodnjega valja: 140 mm, premer zgornjega valja: 120 mm, delovna širina: 1.250 mm, najv. debelina pločevine: 6 mm, TEHNIČNE PODROBNOSTI Ibjdpfx Adezuwwaogea Maksimalna debelina pločevine: 6 mm Maksimalna debelina predoblikovanja: 4 mm Maksimalna delovna širina: 1.250 mm Število valjev: 4 kos Število pogonjenih valjev: 2 kosa Premer zgornjega valja: 120 mm Premer spodnjih valjev: 140 mm PODROBNOSTI O STROJU Nadzor: CNC Pogonska enota: Hidravlična Moč: 4 kW Dimenzije in teža Lastna teža: 1.450 kg Dimenzije (D x Š x V): 2.700 x 1.450 x 1.500 mm Transportna teža: 1.450 kg Število transportnih paketov: 1 kos OPREMA Označevanje CE Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1996, številka stroja/vozila: 5090, Ponudba 22186 Tehnični podatki: Ibedjztvgwepfx Adgja - Upogibna moč - Cev pri 45 kg / mm²: Ø 6 – 48 mm - Polni material do približno: 30 mm - Maksimalni kot upogiba: 180° - Polmer upogiba: 2 x D - Pogon: 400 V / 1,5 kW - Potrebna površina: približno Š 4500 x V 1400 x G 1000 mm - Teža: približno 600 kg - Z: digitalni prikaz kota upogiba + natančna nastavitev kota upogiba - Naprava za upogibanje s vretenom 3,0 m, s hidravličnim povratkom - Upogibna orodja: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - različna upogibna vretena: 3000 mm

Stanje: rabljeno, Leto izdelave: 1982, Tehnične podrobnosti: Širina pločevine: 1500 mm Debelina pločevine: 1,5 mm Razdalja med nosilci: 1760 mm Dolžina rezila: 152 mm Maksimalni kot upogiba: 160 ° Skupna potrebna moč: 1,3 kW Približna teža stroja: približno 800 kg Približne dimenzije stroja (D x Š x V): 2,5 x 0,7 x 1,5 m · Nastavitev zgornjega vodila: 350 mm · Nastavitev upogibnega elementa/spodnjega vodila: 60/60 mm, motorizirano · Rob upogiba do maks. polmera 10 mm · Brez zadnjega opore - možnost naknadne vgradnje · Ročni števec Isdpeu Ibzwsfx Adgoba · Noga (pedal) z dvojno funkcijo (desno/levo) Priporočeni kot upogiba po navedbah prejšnjega lastnika: 130°. Dodatna oprema: · 1 komplet orodij, primerljiv z orodjem na fotografiji

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Working width: 3000 mm, max. sheet thickness: 12 mm, with digital display for roll adjustment, central lubrication, air cooling, cone bending device, and CNC control. Iedpfjnvfctex Adgoba

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Max. working length: 2000 mm, compressed air connection: 6 bar, connected load: 1200 W, the machine has seen very little use. Ibjdpfx Adslc N Spegsa

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), Working width: 1250 mm, max. sheet thickness: 3 mm, equipped with loading table, vacuum lifter, feed table with rollers, ejector, output table, control console and manual. Inspection is possible. Available from March 2024. Ibodpjq A Un Sofx Adgoa

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Working width: 3000 mm, max. sheet thickness: 110 mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral roller supports. Ibodpfx Adenvfc Eogja

Leto izdelave: 1981, stanje: pripravljen za uporabo (rabljen), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to min. Ø 450 mm, machine overhauled in 2009, factory inspection in 2012. Iodpfx Adonvfdbjgeba

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Working width: 3000 mm, max. sheet thickness: 120 mm, with optical display of roll adjustment, central lubrication, cone bending device, trailing brake, and interchangeable top rolls Ø820 mm and Ø740 mm. Iodpfxjnvfdfj Adgjba

Stanje: pripravljen za uporabo (rabljen), Na voljo je celotna linija za upogljanje, namenjena izdelavi prirobničnih obročev. Dimenzije obdelovanca X/Y: 440 mm/350 mm, maks. presek (S355 NL): 65000 mm², maks. dolžina ploščatega jekla: 22000 mm, maks. zunanji premer obroča: 7000 mm, maks. notranji premer obroča: 2320 mm, maks. teža obroča: 11 t. 1) Transportni trak Faccin, dolžina: 22000 mm. 2) Stroj za upogljanje obročev Faccin Giotto 3000. 3) Varilni stroj za odrezane konce Asdorfer HY 1500, moč: 1500 kVA. 4) Manipulacijski sistem Faccin, maks. premer obroča: 6500 mm. Dokumentacija je na voljo. Ogled na kraju samem je možen. Ibedpfjvr Edaox Adgea