Mass International S.r.l. Nds nakup rabljenega (10.098)

Leto izdelave: 2024, stanje: novo, Applications: Production of: pavements, curbstones, concrete masonry blocks, foundation blocks, posts, floor slabs, chimneys, gutters, road culvert covers. Advantages: Intensive vibration combined with hydraulic pressing of the concrete ensures high-quality concrete products. Vibrators mounted on the counter-mould play a key role in achieving optimal concrete compaction. Optional: Automatic operation: PLC (Mitsubishi Electric) + touchscreen + control software for automatic machine operation; Software parameters are set according to the concrete products to be produced; Memory for 30 different programmes; The control programme provides essential information such as the number of cycles performed, average cycle time, and actual operating time. Hard-chromed tubular guide columns Teflon-coated sliding bearings High productivity Isdpfx Aehufyheb Ajtg Our extensive range of moulds enables versatile production. Reliable mechanical and hydraulic systems. Technical data: Components: press, pallet stacking area, pallet feed line, concrete hopper, concrete feed box (1) for the mould, pallet discharge line with fresh products, hydraulic unit, electric control panel with PLC. Pallet dimensions: 700x670x40mm Usable area: 640x640mm Min./Max. finished product height: 40mm/250mm Vibration frequency: 3000rpm Hydraulic pump flow rate: 40 l/min Cycle time: 60–100 seconds (automatic: 35–60 seconds) Installed power: 15.50 kW Hydraulic power unit: 7.5 kW Table vibrators: 6.00 kW + 0.28 kW Counter-mould vibrators: 0.80 kW Discharge line: 0.55 kW Supply voltage: 380V Overall dimensions: Width: 1.60m (excluding hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine weight (without mould): 4,000 kg Approx. mould weight: 250–300 kg Optional: paving stone finishing layer device

Stanje: novo, Applications: Production of concrete blocks for walls, foundations, columns, roofs, chimneys. Production of concrete elements for water drainage. Advantages: - The optimal distance between the tooling and casing ensures a convenient position for the operator - Handling the steering wheel requires minimal effort thanks to a gear reducer Itsdpjiwut Tofx Ab Aog - Simple operation and maintenance - Professional-grade vibrator with low power consumption - Automatic stop of vibration after demoulding - Wide range of moulds available - Shuttering for tall concrete elements (up to 370 mm) can be installed* Technical Specifications: - Maximum mould dimensions: 800 x 500 mm - Maximum end product height: 370 mm - Cycle time: 60 seconds - Power supply: 0.28 kW - Supply voltage: 220V - Overall dimensions: 1.35 x 1.55 x 1.7 m - Machine weight (including mould): 400 kg - Vibrator speed: 3,000 rpm - Concrete output: 2 m3/hour - Recommended concrete mixer: MX300L

Leto izdelave: 2023, stanje: novo, Stroj je opremljen s popolnimi opaži (rotirajoča stena, 5 jeklenih obročev, zunanji opaž) za cevi s premeri: Dint=1000mm si Dint=800mm; Iedpfjiy Dl Hox Ab Ajtg - Oprema lahko izdeluje nearmirane betonske cevi s priključnimi vtičnicami: Nagib = 1000 mm; Nagib = 800 mm; Nagib = 600 mm; Nagib = 500 mm; Nagib = 400 mm; Vdolbina = 300 mm; - Največja višina cevi: 1000 mm; najmanjša višina cevi: 250 mm - Vertikalni prenos rotacijske glave – električni motor - Spremenljiv vrtljaj vrtljive glave (frekvenčni pretvornik) - Velikosti: 2,0x2,0x4,2 metra - Masa≈2000 kilogramov - Moč: 16 kW (napajalna napetost: 380V) - Povprečna produktivnost: 1 cev / 6 minut - Polnjenje stroja z betonom: ročno; (opcijsko – po tekočem traku) - Manipulacija opaža z betonsko cevjo v notranjosti: z viličarjem; - Sanacija opaža: takoj. - Obnovitev obroča: po 2-3 dneh, odvisno od temperature okolja. - Frekvenčni pretvornik omogoča prilagajanje hitrosti glede na notranji premer cevi. - Menjava rotacijske glave je preprosta in hitra. - Vrtljive glave so obložene z zamenljivimi jeklenimi ploščami, odpornimi proti obrabi. POTREBNA OPREMA: - Mešalec betona MX500L z nakladalnikom agregata: priprava betona - Transporter: transport betona od mešalnika do opaža. Jekleni obroči za spodnji čep - Proizvodna površina mora biti popolnoma ravna!

Stanje: novo, Motorized concrete block machine Production of concrete blocks for use in: masonry, foundations, columns, floors, and chimneys. Powerful hydraulic pressing Operator’s seat Concrete hopper – 500 liters Automatic demoulding Maximum mould dimensions: 1200x400 mm Maximum concrete product height: 200 mm Cycle time: 45 seconds Installed power: 5.5 kW Supply voltage: 380 V Overall dimensions: 2.2 x 2.0 x 1.85 m Weight (including mould): 2000 kg Vibrator motor speed: 3000 rpm Concrete consumption: 4 cubic meters/hour Iodpfx Abehx N Nmj Ajtg

Leto izdelave: 2023, stanje: novo, 1.) Applications: Production of concrete blocks for: masonry, foundations, columns, flooring, lintels, chimneys; gutters and gutter covers; 2.) Advantages: - High productivity - Active mold surface 1200 x 800 mm (12 masonry blocks 400x200x200 mm) Itsdpfoiwxrgex Ab Aeg - Hydraulic operation - Teflon bushings on sliding bearings in the guide columns - Reliable mechanical and hydraulic systems - Operator seat - Concrete hopper – 700 liters - Hydraulically operated drawer for concrete feed into the mold - 2 vibrators on the perforated plate - 4 electric motovibrators – mold vibration - Automatic stop of vibration during demolding - Polyurethane-coated wheels + hydraulically driven wheel for direction change - Wide range of molds - Allows installation of molds with a height of up to 370 mm – can produce walkable channels and open trenches 3.) Technical Specifications: - Maximum mold dimensions: 1200x800 mm - Maximum finished product height: 370 mm - Cycle duration: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00 m - Machine weight (with mold): 4000 kg - Vibration frequency: 3000 rpm - Required quantity of semi-dry concrete: 8 m³/hour - Recommended mixer: SAB6MC automated concrete station

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, VEČLISTNA ŽAGA COSMEC SM 400 Tehnični podatki: • Širina gosenice: 400 mm • Maks. višina reza: 160 mm • Maks. premer žage: 350 mm • Nemoteno nastavljanje pomika Itedpfsytcruex Ab Ajg • Avtomatski sistem mazanja • Proti-povratna zaščita • Vodilo • Izvlečna cev: 260 mm • Varnostno stikalo • Napajanje: 380 V • Moč glavnega motorja: 34,5 kW LETO IZDELAVE: 2000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Preklopnik za mešalnike na tirnicah – Sistem nakladanja zabojev na paletah v bobne na tirnicah Znamka: Inox Meccanica s.r.l. Model: ELEVATORI PER CONTENITORI Serijska številka: 2853 Letnik izdelave: 2018 Moč: 5,5 kW Isdpfewa Dtbex Ab Aetg Napetost: 400 V, 50 Hz Teža: 1800 kg Maksimalne dimenzije zabojev na paletah: 1200 mm x 1000 mm x 800 mm Višina dviga: 3600 mm Maksimalna nosilnost: 600 kg Skupne dimenzije sistema za nakladanje: 3400 mm x 2200 mm x 4000 mm Dolžina tirnic: 17500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, HORIZON SPF-200A + VAC-100 + FC-200A + ST-40 Booklet Production Line General Description: For sale: a complete booklet production line from the renowned Japanese manufacturer Horizon International Inc. This line is designed for fully automatic collating, stitching, and trimming of booklets. The machine is in perfect working condition and has been used in a production environment. It is ideal for both digital and offset printing houses. The system includes: - Collating towers: VAC-100a + VAC-100m - Stitch-fold module: SPF-200A - Three-side trimmer: FC-200A - Stacker: ST-40 Technical Specifications: ---- 1. Collating Towers (Air-Suction Collator) Models: VAC-100a / VAC-100m Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A (per tower section) Feeding system: air suction Number of towers: 2 (extended collecting system), 10 bins each ---- 2. Stitch-Fold Module Model: SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Functions: - Wire stitching (2 heads) - Fold in half - Booklet production up to 4.5 mm (booklet maker) ---- 3. Fore-edge Trimmer Model: FC-200A - Automatic front/bottom trimming of booklets - High cutting precision - Inline operation with SPF-200A ---- 4. Stacker Model: ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A - Automatic stacking of collated sections ---- Condition and Use: - Machine is in good technical condition Itodpfey Axdajx Ab Asg - Complete production line - Regularly used and maintained - Production counter visible on the control panel (approx. 1.8 million booklets) ---- Advantages: ✔ Complete system for booklet production ✔ Reputable manufacturer – Horizon ✔ Inline production capability ✔ High performance and repeatability ✔ Ideal for medium and large print runs ---- Additional information: - Tests can be performed on site - Start-up assistance available - Availability: by arrangement

Stanje: dober (rabljeno), Leto izdelave: 2017, disperzno i UV lakiranje Iedpsyv Dm Hofx Ab Astg min. veličina arka 152x152 mm maks. veličina arka 760x760 mm debljina papira 0,1 - 1,2 mm UV lak, disperzni lak 120 g/m² bez površinske obrade i više 150 g/m² sa površinskom obradom i više 200 g/m² sa površinskom obradom i više automatsko vreme podešavanja 5 minuta automatsko vreme pranja 10 minuta automatsko vreme podešavanja 5 minuta automatsko vreme pranja 10 minuta 8,5” x 11” / 215 mm x 280 mm Listovi po širini 12.700 listova/sat 12” x 18” / 305 mm x 450 mm Listovi po širini 9.900 listova/sat 14” x 21” / 355 mm x 530 mm Listovi po širini 8.800 listova/sat 21” x 30” / 530 mm x 750 mm Listovi po širini 6.300 listova/sat 28” x 40” / 710 mm x 1020 mm Listovi po širini 5.000 listova/sat brzina lakiranja 4.600 B2/sat aniloks valjci za mašinu: 3; 9; 12; 18 UV sušenje IR sušenje (pogodno za disperzni lak i primer za HP Indigo) Komplet za obradu tankih materijala Nanošenje laka pomoću komorne rakle visoki uređaj za slaganje papira 2 nezavisna kruga za lak sa automatskim pranjem Anti-Ghost sistem inovirani sistem za izlaganje arka

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 99331, skupna širina: 2.500 mm, skupna dolžina: 2.840 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, En venta se encuentra una máquina de envasado tipo flow-pack de alta calidad, diseñada para el embalaje eficiente de una amplia variedad de productos. El equipo está en muy buen estado de uso, es completamente funcional y está listo para su funcionamiento inmediato. La máquina está equipada con impresora de la marca Videojet, modelo 6210. Junto con la máquina, la oferta incluye una mesa giratoria de accionamiento independiente con un diámetro de 1500 mm, así como una cinta transportadora con un ancho útil de paso de 275 mm para la mesa giratoria. Además, se incluye film de envoltura en la venta. Las especificaciones y cantidades son las siguientes: Isdjv Nakpspfx Ab Aotg AVBE 70 µ, 480 mm Mandril: estándar Cantidad: 2 palets Total: 16.800 Im, 25.600 Um, peso aprox. 871 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 04.522, skupna dolžina: 7.820 mm, skupna širina: 2.550 mm, skupna višina: 2.670 mm, 2005 UBH INTERNATIONAL 20FT ZAMENLJIVO TELO cisternski zabojnik 35.000 l / 1 prekat / 4 pregrade '5 pokrovov UN PRENOSLJIV T11 EMKD parno gretje izpraznjevanje spodaj veljavno še 2,5 let + inšpekcija CSC do 06-2028 = Dodatne informacije = Splošni podatki Leto izdelave: 2005 Modelno leto: 2005 Uporabni material: Kemikalije Teže Lastna teža: 4.475 kg Nosilnost: 31.525 kg Skupna dovoljena masa: 36.000 kg Funkcionalno Volumen tovornega prostora: 25.000 l Znamka nadgradnje: CIMC 2016, 20FT, 25.000 l, L4BN, UN Portable, T11, parno gretje, izpraznjevanje spodaj, 5Y: 10/2022 Itjdpfx Aboy Aymvo Asg Število prekatov: 1 Stanje Tehnično stanje: zelo dobro Optično stanje: dobro Dodatne informacije Za več informacij kontaktirajte Arne Honingha.

Stanje: dober (rabljeno), Leto izdelave: 2005, Push-Through Furnace System - Pusher (PUS1), Manufacturer: Ipsen International GmbH, Model: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of Manufacture: 2005, Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Iodpfx Aoyabxysb Aetg Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Preheating Furnace, Model DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas fired, 80-100 mbar, 350-500 °C Push-Through Gas Carburizing Furnace (Double Lane), Model PP-2 65x65x65-18-G, natural gas fired, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950 °C, 140 pcs per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Model QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, Air cooling, 6 m³ bath volume, max. 120 °C, 60-80 °C operating temperature Two-Chamber Post-Washing Machine, Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Tempering Furnace, Model DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, max. furnace temperature 300 °C, 150-240 °C operating temperature Batch Transport System, Measuring, Switching and Control Cabinet with Conti-Control system, Model CO/CO2-2 Batch Data: Case hardening for gearbox components 650 mm x 650 mm x 650 mm, max. 280 kg, Batch transport height 800/2,200 mm

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), MASS NC Inclined Conveyor / Angle Conveyor Angled conveyor belt with base frame Conveyor belt length: 1,500 mm flat section + 1,500 mm inclined section. Discharge height: approx. 1,400 mm. Description: Available immediately, Ready for shipment, multiple units available Belt speed: 7 m/min T 30 cleats, welded, cleat height 30 mm Drive: 0.37 kW, 380V, 50Hz Height-adjustable angled conveyor belt with adjustable angles Itodpfspby Urex Ab Aog Infeed section: 1,500 mm Incline section: 1,500 mm Usable width: 850 mm Cleat height: 30 mm Belt speed: 7 m/min Standard control panel with emergency stop / stop button Overall width: 950 mm (excluding motor) PU belt Color: green L-type cleats Cleat spacing: approx. 450 mm Cleat height: 30 mm Standard control panel with emergency stop / stop button Mounted on swivel castors with brakes Side guide plates in the infeed section

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 13.000 mm, skupna širina: 5.650 mm, skupna višina: 3.300 mm, vhodni tok: 10 A, vhodna frekvenca: 50 Hz, Spiral Bread Cooler (Industrial) An industrial spiral bread cooler is offered, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. Itodpfxsy Au Inj Ab Aeg The spiral has a total length of approximately 420 meters, ensuring uniform cooling of the production. The time for one complete rotation is about 94 minutes, allowing for an efficient cooling process after baking. The system capacity is around 2,500 loaves per hour, with simultaneous accommodation of up to 4,000 loaves and a total weight of approximately 2,566 kg. The construction allows configuration as a single or double spiral (figure-eight type), depending on production needs. It is suitable for integration into existing bread and bakery production lines. Main parameters: External diameter: approx. 5.65 m (for one loop) Height: approx. 3.30 m Required floor space: around 12–13 m in length (depending on configuration) Power supply: 400V AC / 24V DC Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold disassembled. All components are available. It was operational up to dismantling and is in good technical condition. On-site inspection possible by prior arrangement. Additional information can be provided upon request.

Stanje: novo, Leto izdelave: 2026, New installation from one of the world's largest manufacturers, Dardi International / Flying Bridge version, 4x2 m cutting area, 2-D, linear guides with ball screw drives on all 3 axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, available directly in our showroom in Elsenfeld with the following features: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine equipment: - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control (Windows 11) - IGEMS 2-D CAD/CAM programming system including automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotary union - Automatic central lubrication Itsdpsx Ig Siofx Ab Aeg - High-pressure supply via fixed profile and shut-off valve - Allfi® abrasive conveying system, 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, steplessly adjustable, pneumatic-free - KEYENCE light barriers for CE compliance - IGEMS and operator training, as well as on-site installation, available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high-pressure pump - Aqualon High Pressure Pump AQRO S50c 37 kW / 3.8 l/min Optional manual swiveling head available at extra charge (see pictures).

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16/195245, natančnost ponavljanja: 0,025 mm, delovno območje: 3.660 mm, potovalna razdalja osi X: 3.660 mm, pomik osi Y: 1.830 mm, pomik po osi Z: 200 mm, natančnost pozicioniranja: 0,025 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 200 mm, dolžina mize: 4.000 mm, obratovalna hitrost: 212 mm/s, širina mize: 2.000 mm, pritisk: 6.000 letvica, hitrost pozicioniranja: 12.700 m/min, hitro pomikanje X-os: 12.700 m/min, hitri pomik os Y: 12.700 m/min, obratovalni tlak: 6.000 letvica, hitrost rezanja: 7.620 mm/min, največja hitrost vožnje: 12.700 mm/min, dolžina podajanja os X: 3.660 mm, dolžina pomika po osi Y: 1.830 mm, dolžina podajanja os Z: 200 mm, skupna širina: 21.000 mm, hitrost pomika os X: 12.700 m/min, hitrost podajanja osi Y: 12.700 m/min, tlak vode: 6.000 letvica, priključek za stisnjen zrak: 6 letvica, tlak črpalke: 6.000 letvica, višina izdelka (maks.): 200 mm, delovna dolžina: 3.660 mm, vhodna frekvenca: 50 Hz, moč: 75 kW (101,97 KM), nosilnost: 3.200 kg, globina grla: 21.000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – precision up to 0.025 mm. This Flow IFB is not an ordinary waterjet system. Equipped with 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top tier of waterjet cutting. Comparable new systems today cost over EUR 400,000. WHY THIS MACHINE WILL IMMEDIATELY BOOST YOUR PRODUCTION: - 87,000 PSI instead of the usual 60,000 PSI: That means 20–50% higher cutting speeds, 30–50% lower abrasive consumption, and significantly reduced per-part costs in daily operations. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. You achieve burr-free and taper-free edges at 2–4x the speed of conventional systems – with no secondary finishing required. - Ready for production after oil change: The system was in regular operation until August 2025. No years-long downtime, no hidden defects. Operating hours can be read directly from the controller during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control. Your operators know the system, spare parts and support are available long term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year of manufacture: 2007 Serial number: 2006353W-044 Cutting area: 1,830 x 3,660 mm Z-axis travel: 200 mm Table dimensions: 2,000 x 4,000 mm Table type: Grate table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5-axis (+/- 10 degrees articulation) Height sensor: Automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Itsdpfeyl S Nyex Ab Aeg Control: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a workshop. All components are fully present. There is no visible damage or corrosion. An oil change is required before recommissioning. Operating hours can be read directly from the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Grate table with collection basin - Complete electrical cabinets - Palette of spare parts (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane for loading available on site. Inspection possible at any time by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, barva: drugo, prostornina tovornega prostora: 25 m³, UBH INTERNATIONAL 20FT ISO cisternski kontejner 22.500L / 3 prekat. Prekat 1: 7.500L Prekat 2: 7.500L Prekat 3: 7.500L IMO1 T7 22T6 Spodnji izpust Parno ogrevanje 2,5Y- + CSC test veljaven do 09-2028 = Dodatne informacije = Splošne informacije Leto izdelave: julij 2001 Modelno leto: 2001 Mere Dimenzije (D x Š x V): 606 x 244 x 259 cm Teže Lastna teža: 4.550 kg Nosilnost: 29.450 kg Skupna dovoljena masa: 34.000 kg Ijdpoyznbxefx Ab Aetg Funkcionalno Znamka nadgradnje: Van Hool 24.720L TC, 2 prekata (11.950L/12.770L), L4BN, IMO1, T11 Število prekatov: 2 Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro

Leto izdelave: 2006, stanje: dober (rabljeno), Konfiguracija • Odvijalec • Sistem za nadzor registrov • Fleksotiskovna enota (nanos barve / laka) • Laminirna / hladna folijska enota • Izsekovalna enota • GEW UV sušilnik • Razrezna enota • Navijalec _____ Opis stroja ABG Digicon 1 je zasnovan kot modularna končna rešitev za digitalno in fleksotiskarsko proizvodnjo etiket. Vgrajena fleksotiskarska enota omogoča nanos laka ali dodatne barve. Itsdpfx Absynkwne Aeg Laminirna / hladna folijska enota omogoča dodatno plemenitenje. Izsekovalna in razrezna enota zagotavljata natančno končno obdelavo in predelavo v role. Polrotacijska funkcija omogoča cenovno učinkovito prilagodljivost za manjše serije, medtem ko polna rotacija omogoča večjo produktivnost.

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TAG ARTENA-03722-1/11, The 16-channel TAG Artena Weighing and Filling Machine is a fully automated, multi-product weighing system used for precision portioning of delicate small and medium-sized loose fruit and vegetable produce into trays. The machine integrates into the production line upstream from packaging and labeling machines. Products are deposited in bulk onto the weighing machine’s conveyor belt, transferred to the feeding conveyors via a dynamic hopper, and placed into trays. Trays are automatically destacked and distributed onto the indexed conveyor belt. During filling—which occurs in 4 steps—the trays are weighed in-line using patented technology. Operation is managed via a touch-screen control panel, offering full oversight of all machine functions. Packaged product specifications and machine performance are as follows: • Weighing and filling system for delicate fruit • Feeding belts made of special soft material for stone fruit to prevent bruising • 8+8 multi-product weighing units • Enhanced quality guarantee for longer product shelf life due to reduced drop heights • Linear combinatorial and/or counting operating logic • Dual three-way automatic tray/basket destacker • Double-lane, multi-format automatic tray/basket conveyor • Basket weight: from 300 g up to 1,500 g • Basket size: from 65x65xh25 mm up to 200x200xh110 mm • Basket shapes: square, rectangular, round • Multi-material baskets: plastic, plastic-free, cardboard, and other possible materials • Easy-to-use touch-screen control • User-friendly interface ready for in-line connectivity • Automatic format change • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clamshell closing device • Two-to-one channel conveyor Itsdsykam Dspfx Ab Aog Main construction features: • Stainless steel frame • Sorting belt with crate tilting platform • 2 product feeding elevator belts • 8+8 multi-product weighing units (patented system) • Clamshell closing device • Multi-format automatic tray destacker • Motorized PU food-grade certified transport belts • Tray diverters • Stepping synchronized movement of respective belts via sensors and microcontrollers • Belt operating logic via microcontroller and dedicated TAG software • Electrical connections for downstream machine synchronization (flowpack or other machinery) • 220V 50Hz power supply, 2.5kW consumption • Compressed air circuit with minimum pressure of 7 bar • Wired internet connection for remote support All command and control functions are managed via a tablet supplied with the machine, serving as both HMI and operator panel. The highly intuitive operation is enabled by the 3D graphic interface and 10” touch-screen display.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina transportnega traku: 1.850 mm, širina transportnega traku: 200 mm, skupna višina: 2.150 mm, Dolžina 185 cm Širina 20 cm Itjdpfoxqgqbjx Ab Aog Višina 215 cm Prenašalec 3,5 cm Z velikim zalogovnikom ZNIŽANJE CENE IZ 1750 NA 1500 EUR!!!

Leto izdelave: 2004, stanje: dober (rabljeno), Haupttechnische Daten • Bahnbreite: max. 330 mm • Maximale Bahngeschwindigkeit: 200 m/min • Maximale Inspektionsgeschwindigkeit: 150 m/min (100% Kontrolle) • Abwickelrollendurchmesser: max. 700 mm • Aufwickelrollendurchmesser: max. 500 mm • Hülsendurchmesser: 76 mm (pneumatische Spannwellen) • Bahnspannungskontrolle: 0,5 – 10 kg, stufenlos einstellbar • Elektronische Bahnlaufregelung (Fife mit Ultraschallsensor) Itjdpfx Abjylynwj Ajg Schneide- & Finishing-Einheit • Scherenschnittaggregat • 3 Ober- und Untermesser im Lieferumfang • Feineinstellung in 0,05 mm-Schritten • Integrierte Randbeschnitt-Absaugung • Pneumatische Spleißstation • Integrierter Etiketten- und Meterzähler Inspektionssystem fleyeVision Druckbildkontrollsystem (100% Kontrolle) • Matrixkamera (1380 x 1040 Pixel) • Blitzbeleuchtung • Erkennung von Druckfehlern wie Druckausfall, Passerabweichung, Flecken, fehlende Etiketten, fehlender Text, Matrixabfall Inkjet-System Imaje S8 Master 2.2G • Zwei Düsen pro Druckkopf • Geeignet zur Kennzeichnung von bis zu 4 Etikettenbahnen • Vollständig in die zentrale Maschinensteuerung integriert

Stanje: rabljeno, Gs international Kapaciteta 12 ton Iedpfx Aboyxv E He Ajtg Letnik 2010 Takoj pripravljen za uporabo Potrebujete nakladalni most na lokaciji? Lahko organiziramo transport nakladalnega mostu za vas.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN.:1111, delovna širina: 1.800 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, moč: 113 kW (153,64 KM), teža obdelovanca (maks.): 60 kg, priključek za stisnjen zrak: 6 letvica, vhodna frekvenca: 50 Hz, AM/KW 1DA2 1800/1300 IC MF je visokozmogljiva naprava za nanose tankih premazov s postopki visokega vakuuma. Naprava je zasnovana za neprekinjeno delovanje s poudarkom na visoki natančnosti in zanesljivosti. • Enota za črpanje: Itsdpfx Abowrnbmo Aeg - vključuje difuzijske črpalke HS20 (17.500–20.000 l/s), - rotacijsko črpalko SV 630 BF (630 m³/h) in - Roots črpalko WH4400 (4.400 m³/h) - Polycold črpalko • Krmilna enota: Siemens S7 PLC in Siemens 15” zaslon na dotik omogočata enostaven nadzor in spremljanje procesa. • Nakladalni sistem: Omogoča rokovanje s 6 kosi substratov na eni strani stroja, medtem ko na drugi strani poteka delovni cikel.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MLS 250 P TR, premer žaginega lista: 200 mm, skupna masa: 4.200 kg, dolžina rezanja (maks.): 2.500 mm, Večlistna žaga za razrez lesa proizvajalca Mario Zaffaroni & Figli S.r.l. Podrobnosti: 1) Dolžina elementov: min. 330 mm, maks. 2500 mm. 2) Debelina elementov: min. 2 mm, maks. 100 mm 3) Hitrost podajanja – delo: 3–45 m/min Itjdoyk U Ebepfx Ab Aog 4) Največja globina reza (rezkanje): 20 mm za žage s premerom 200 mm 5) Skupna moč: 55 kW 6) Moč glavnega motorja: 45 kW 7) Teža: 4200 kg Stroj je popolnoma delujoč in ne potrebuje servisa. V zelo dobrem stanju.

Stanje: dober (rabljeno), Rabljeni Thetford International T3 preša za otpad. Itjdehvi Ahepfx Ab Asg