Lanico Stroj Za Falcanje / Zapiralec Pločevine nakup rabljenega (86.861)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended Ljdpfx Aoypbqnoh Uorl

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Lredpfx Aoypbqhoh Usl Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Lrsdpfx Asypbqbeh Uel Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Lrsdpfxoypbp Re Ah Ujl Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg Lrodsypbp Dopfx Ah Uol 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 1986, Širina pločevine 2040 mm Debelina pločevine 4,0 mm Razmik med stojali 2100 mm Premer valjev 150 mm Skupna potrebna moč 7,0 kW Teža stroja cca 2,2 t Ljdpfx Ahjy Ezzyo Usrl Potrebni prostor cca 2,95 x 1,0 x 1,75 mm Stroj za ukrivljanje pločevine s 3 valji - 2 pogonska valja - zadnji valj električno nastavljiv - konično ukrivljanje - nožno stikalo - naprava za izklop v sili

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, notranji premer tuljave: 300 mm, zunanji premer tuljave: 1.300 mm, teža tuljave: 1.500 kg, največja širina izdelka: 550 mm, najv. debelina pločevine: 3 mm, moč: 2,5 kW (3,40 KM), vhodna napetost: 200 V, vhodni tok: 3 A, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, DATEC ravnalni stroj za pločevino z navijalnikom naprodaj Proizvajalec: DATEC Tip: MN7-550U Leto izdelave: 2000 Maks. širina pločevine: 550 mm Moč: 3x200V, cca 2,5kW Ledpfx Asyangkoh Uorl Debelina pločevine: cca 0,3 – 3,2 mm Teža koluta: do 1–2 ton

Stanje: rabljeno, Leto izdelave: 2011, Širina pločevine 1270 mm Največja debelina pločevine 4,5 mm Predupogib 4 mm Premer valjev 120 mm Lredpoyv Nq Rjfx Ah Ujl Hitrost valjanja 8 obr/min Minimalni premer upogibanja 180 mm Skupna moč 2,2 kW Teža stroja cca 1250 kg Dimenzije 2470 x 750 x 1000 mm

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. Ledpjynmw Rsfx Ah Usrl * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Lrsdpoynmwksfx Ah Uol Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Širina lima 2050 mm Debljina lima 4,5 mm Debljina savijanja lima 4,0 mm Dužina valjaka 2050 mm Najmanji prečnik 210 mm Prečnik gornjeg valjka 140 mm Težina 1530 kg Dimenzije D-Š-V 3220 x 1200 x 900 mm Izložbena mašina iz 2026. godine sa samo oko 2 radna sata Stanje kao NOVO Specijalna cena na upit Oprema: - robusna elektro-mehanička mašina za kružno savijanje - 2 centralna valjka na elektro pogon (gornji i donji valjak) Lrjdpfx Ahjxaawge Ujl - Gornji valjak se ručno otklanja, sa preklopnim ležajem - uključuje uređaj za konusno savijanje - mobilna upravljačka konzola - Donji valjak se ručno podešava, pomoću ručnog točka - asimetrični raspored valjaka - samokočeći glavni motor - sigurnosni uređaj (sigurnosno uže sa prekidačem) - CE znak/izjava o usklađenosti Specijalna oprema uključena u cenu: - kaljeni valjci - motorizovano bočno podešavanje valjka - digitalni prikaz pozicije za motorizovano podesivi bočni valjak

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, številka stroja/vozila: M170-382, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, število valjev: 3, premer zgornjega valja: 170 mm, dolžina valja: 1.600 mm, delovna širina: 1.600 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, skupna masa: 2.310 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.130 mm, moč: 55 kW (74,78 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Ponujamo to hidravlično valjčno stiskalnico za pločevino Knuth KRM ST-15/6.0, v novem stanju, letnik 2023. Stroj je bil naročen za stranko, ki si je premislila, zato ga moramo prodati po promocijski ceni. Trenutno je stroj na sedežu podjetja Knuth v Wasbeku v Nemčiji in še ni bil uporabljen. Lredpfeyyd S Rsx Ah Usl Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 2001, stanje: rabljeno, Univerzálna skúšobná stanica na plechy a pásy Univerzálna skúšobná stanica na plechy a pásy Erichsen Model 145-60 Stav: Použité Rok výroby: 2001 Technické údaje Hydraulický pohon Max. výkon motora: 11,5 kW / 1500 1/min Výkon čerpadla (malý okruh): 12,3 l/min Výkon čerpadla (veľký okruh): 31 l/min Skúšobný valec Dierovacia sila: 665 kN / 160 bar Hydraulické otváranie skúšobnej hlavy Max. pracovný tlak: 95 bar Držiaci tlak: 50 bar Prepínateľné sily ťahu Malý rozsah ťahovej sily: 37 kN / 10 bar Ledpoyr R Uhefx Ah Uorl Stredný rozsah ťahovej sily: 225 kN / 60 bar Veľký rozsah ťahovej sily: 600 kN / 160 bar Max. zdvih ťahu: 150 mm Max. rýchlosť ťahu: 750 mm/min Indikácia zdvihu lisovacieho tŕňa: rozlíšenie 0,1 mm Elektrické pripojenie Prípojka: 400 V trojfázový, 50 Hz Istenia: 25 AT a 35 AT Prevádzková teplota okolitého prostredia: medzi +5° a +50°C Rozmery a hmotnosť Rozmery (D/Š/V): 1800 mm / 1320 mm / 1400 mm Čistá hmotnosť: cca 2400 kg

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks Ledpfjxacdvsx Ah Ujrl - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1. postaja: odstranjevanje robnih srhov pločevine, 2. postaja: odstranjevanje srhov pri izrezih in zunanjih radijih, z VA krtačami; maksimalna debelina pločevine: 5 mm Ledpfxsyyahbo Ah Uorl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 1.100 mm, skupna širina: 1.320 mm, skupna višina: 1.050 mm, vhodna frekvenca: 50 Hz, Stroj za čiščenje pekačev KD-Putz Tubur Premium Lrjdeyv U Nfepfx Ah Ujl Stroj za čiščenje pekačev Za pekače / perforirane pekače Kratka stran dvignjena Izvedba iz nerjavečega jekla Z oljenjem in vozičkom za pekače Priključek 400V, vtič 16A-CEE Mere: 1320 x 1100 x 1050 mm (ŠxGxV) Rabljeni stroj iz pekarne

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: trifazni, Stroj za čiščenje pladnjev Jeros 5015/828 za pladnje z 2 robovoma krajša stranica dvignjena izvedba iz nerjavečega jekla z oljnim podmazi preizkušeno po DGUV V3 samo pri nas Ljdpfx Aeyaklcjh Ujrl priključek 400V, 16A CEE vtič rabljeni stroj Vabljeni k obisku!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NOUVEAU NOUVEAU Machine de nettoyage de tôles à 3 & 4 bords NOUVEAU NOUVEAU Utilisation par une seule personne Construction en acier inoxydable, mobile taille maximale des tôles : jusqu’à 600 x 800 mm Bac de récupération coulissant en dessous Dimensions : 2234 x 630 x 1372 mm (L x l x h) La polyvalence du nettoyeur de plateaux/de tôles se démontre aussi par sa capacité à traiter même des plateaux à 4 bords avec une hauteur de rebord jusqu’à 24 mm. Les impuretés s’accumulent sous la machine sur une étagère coulissante, facile à vider. L’équipement est totalement mobile et peut être aisément déplacé là où on le souhaite en fin de poste. Toute la structure est grenaillée, rendant les surfaces aussi lisses et hygiéniques que possible. Raccordement : 400V, 1 kW, fiche CEE 16A Poids : 205 kg Machine neuve Avec garantie + service de pièces détachées Qualité d’un spécialiste ! Profitez de plus de 35 ans d’expérience ! Option : - Nettoyage des tôles jusqu’à 600 x 1000 mm - Graissage/huilage des tôles - Pack service - Service de livraison - Mise en service & initiation Lrsdpfew S Slnox Ah Ujl Venez nous rendre visite !

Stanje: zelo dobro (rabljeno), 305 RABLJENA čistilna naprava za pladnje Jeros za pladnje 58x78 (pladnji brez robov ali z 2 robovoma na krajših straneh) TEHNIČNI PODATKI: - moč: 1,5 kW ZUNANJE MERE (v cm): - delovna širina: 78 Navedena cena je neto. Lrjdpfxeyi Eqls Ah Uel GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOŠKO, RUSKO IN UKRAJINSKO.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.100 mm, skupna širina: 1.400 mm, skupna višina: 1.800 mm, skupna masa: 2.300 kg, nazivna moč: 23,5 kW (31,95 KM), 12 mesecev garancije, 1800 delovnih ur Lsdpoyw Hhvjfx Ah Uorl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, used Timesavers model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered and can be inspected by appointment! Technical data: Lrsdoyu Tfhopfx Ah Usl Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Transport speed, frequency controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connection: 400 V Frequency: 50 Hz Control voltage: 24 V Total connected load: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total extraction capacity: Required extraction volume at 100 mm water column: 3,000 m³/h W-unit: Roller unit Contact roller unit, Ø150 mm Contact roller hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W-unit: 15 kW B-unit: Brush unit Brush Ø200 mm Oscillation: 110 strokes/min Main drive: 11 kW Total power B-unit: 11 kW Machine configuration according to CE Door switch Emergency stops at the infeed and outfeed sides of the machine Machine weight, unpacked: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.060 mm, najv. debelina pločevine: 150 mm, skupna dolžina: 2.640 mm, skupna širina: 1.905 mm, skupna višina: 2.090 mm, skupna masa: 3.200 kg, širina mize: 1.060 mm, višina obdelovanca (maks.): 150 mm, moč: 25,2 kW (34,26 KM), vhodni tok: 52 A, Cenovno ugoden osnovni model, a vseeno opremljen z vsemi potrebnimi funkcionalnostmi. S širino delovne površine do 1060 mm stroj v enem prehodu združuje odstranjevanje igel, zaobljevanje robov in odstranjevanje laserskega oksida. • Širina mize 1060 mm • Največja višina obdelovanca 150 mm • Odstranjevanje igel in zaobljanje v enem prehodu • Brusni trak • 2 x 2 zgornje ščetke • Pritisni valji pred in za vsakim agregatom Uporabniku prijazno upravljanje prek zaslona na dotik. Lrjdey Icrrepfx Ah Uol Razstavni stroj!

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9722 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 16.600 € Leasing obrok: 318,72 € Na zalogi: 1 Dolžina upogibanja: 2050 mm Maksimalna kapaciteta upogibanja - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 130 mm Hitrost valjanja: 3,5 m/min Moč motorja: 2,2 kW Dolžina: 3200 mm Lrodpfx Ahewiqpbo Usl Širina: 750 mm Višina: 1000 mm Teža: 1500 kg 3 valji Asimetrična postavitev valjev - z predupogibanjem 2 pogonska valja z zavornim motorjem KALJENI VALJI ročno pomikanje stranskih valjev Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Stožčasto valjanje z nastavkom zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI MOŽNOSTI: (Dobavni rok z možnostmi približno 8 tednov) motorno pomikanje stranskih valjev digitalni prikaz položaja stranskih valjev

Stanje: rabljeno, Širina lima 3355 mm Debljina lima 63,5 mm Prečnik valjka 686 mm Napon 400 V Ukupna potrošnja energije 150 KS Težina mašine cca. 95 t Potrebna površina cca. 62 m Ukupna težina 95 tona Lredoyuql Sjpfx Ah Uel Podešavanje donje šine Prilog za konusno valjanje Tehnički podaci su prema informacijama proizvođača, odnosno operatera, i za nas su nezvanični. Zadržavamo pravo međuprodaje; primenjuju se isključivo naši opšti uslovi poslovanja i prodaje. O nama više od 400 mašina na lageru preko 15.000 m² skladišnog prostora, kapacitet krana 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite da prodate mašine, proizvodne linije ili vaše preduzeće, obratite nam se. Ostale ponude možete pronaći na našem sajtu. Pregledi su mogući po dogovoru. Radujemo se vašoj poseti. Vaš Markus Hirsch tim

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki Delovna širina: 2540 mm Lrodpfx Asytpareh Uol Maksimalna debelina pločevine: 2,5 mm Maksimalni kot upogibanja: 135° Dolžina: 2880 mm Širina: 1020 mm Višina: 1450 mm Teža: 1300 kg