Kraussmaffei Km 50 - 100 Ax nakup rabljenega (64.271)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 350–2700 C2+ Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk drive) 🔧 Clamping Unit Clamping force: 3,500 kN (350 tonnes) Opening force: 220 kN Platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1,060 × 1,095 mm Tie-bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1,300 mm Ndedpfx Aceyv E Nvo Hsb Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1,829 bar Injection volume: 1,433 cm³ Shot weight (PS): 1,304 g Screw speed: 218 / 284 rpm Injection rate: - 1,508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: Thermoplastics version with abrasion-resistant protection Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1,550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Ndodpjtrya Rofx Ac Hsb Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Ndjdpfxew Hwtho Ac Heb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, razmak između stupova: 1.120 mm, tlak vbrizgavanja: 1.795 letvica, hod izmetalca: 250 mm, Brez izklicne cene – prodaja zagotovljena najvišjemu ponudniku! TEHNIČNI PODATKI Zapiralna enota Zapiralna sila: 8.000 kN Razdalja med stebri (v x š): 1.120 mm x 1.000 mm Največji razmik orodja: 1.400 mm Min./maks. vgradna višina orodja: 600 mm / 1.100 mm Odpiralni hod pritrdilne plošče: 2.000 mm Njdpfx Aoy Ulhcjc Hodb Izmetalni hod: 250 mm Izmetalna sila: 226 kN (v nasprotni smeri: 59 kN) Brizgalna enota Premer polža: 95 mm Razmerje L/D: 23 Brizgalni tlak: 1.795 bar Brizgalni volumen: 3.367 cm³ Brizgalna količina za PS: 3.064 g Brizgalna zmogljivost: 690 cm³/s Zapiralna sila šobe: 166 kN PODROBNOSTI O STROJU Model krmiljenja: MC4 Pogonska moč črpalk: 90 kW Moč grelcev: 61 kW Dimenzije in teža Dimenzije stroja (d x š x v): 10,4 m x 2,86 m x 2,39 m Neto teža: 45 t Transportne mere Zapiralna enota – mere (d x š x v): 6.000 x 2.740 x 2.390 mm / teža: 30 t Brizgalna enota – mere (d x š x v): 6.200 x 2.620 x 2.300 mm / teža: 16 t

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT Nodpfxouggb Dj Ac Hsdb • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, brand KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, ready for immediate use, with low operating hours. Equipped with electronic injection and dosing units as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Ndjdpju Hxm Uofx Ac Hob Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally) Core pull: 1 hydraulic Needle shut-off: pneumatic Tie bar extension: 160 mm Internal pressure sensor Selector valve Transport and loading can be organised Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your workshop? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Dodatna oprema Nedpfjyyxc Dox Ac Hsdb • Ravnanje: Wittmann robotski sistem • Model: W743 • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Leto izdelave: 1996, stanje: dober (rabljeno), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output: max. approx. 140-180 kg/h for H-PVC pipes; actual values may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Ndjdpfx Aoh Nmt Dec Hsb Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) Feed zone heating: 1 Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw tempering Gearbox: Gearbox was replaced at 53,000 operating hours. Overhauled screws and cylinder Note: Current operating time is 62,590 hours.

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, razmak između stupova: 520 mm, delovna prostornina: 318 cm³, injekcijska masa: 289 g, Leto izdelave: 2005 Delovne ure: 80.228 ur Sila zapiranja: 160 ton Nsdpfx Acezkqf Ao Hsdb Razdalja med stebri: 520 x 520 mm Premer vijačnice: 45 mm Volumen vbrizgavanja: 318 cm³ Masa vbrizga: 289 g za PS Oprema: robot Krauss Maffei, jedrna vleka, Euromap, 3 dodatne brizgalne enote.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 120 mm, hod izmetalca: 300 mm, odmični hod: 1.900 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 9.500 kN Odpiralna sila: 665 kN Razdalja med stebri: 1.400 x 1.150 mm Montažne plošče: 1.960 x 1.710 mm Odpiralni hod: 1.900 mm Minimalna višina orodja: 500 mm Maksimalna višina orodja: 1.200 mm Maksimalna odprtina: 2.400 mm Hod izmetalca: 300 mm Visoko zmogljiv polž HPS-UN, premer: 120 mm Polmer šobe: 30 mm Premer odprtine šobe: 12 mm Premer polža: 120 mm Teža brizga (HDPE): 5.420 g Volumen brizga: 7.634 cm³ Specifični vbrizgovalni tlak: 2.257 bar PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 12.770 x 3.420 x 2.750 mm Nedpfxjy T H A Ej Ac Hjdb Teža stroja: 61,5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.500 kN, premer vijaka: 135 mm, razmak između stupova: 1.140 mm, hod izmetalca: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (H x V): 1,600 mm x 1,600 mm Tie bar spacing (H x V): 1,140 mm x 1,140 mm Mold opening stroke: 1,600 mm Mold height (min-max): 500 mm - 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump drive motor power: 132 kW Dry cycle time to Euromap 6: 965 1/h Oil tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle orifice: 9 mm Dimensions & Weight Installation footprint (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control system: 49 t EQUIPMENT Krauss Maffei LRX 500 robot MC 5 control system with color monitor Ndjdpfey T Hmkox Ac Heb Integrated control panel and USB storage device Complete plasticizing unit for thermoplastics Non-return valve

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 11.000 kN, premer vijaka: 120 mm, tlak vbrizgavanja: 1.758 letvica, injekcijska masa: 6.175 g, odmični hod: 2.000 mm, KraussMaffei KM 1100–12000 MX incl. WITTMANN Robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Mould height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / optional): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s MACHINE DETAILS Electrohydraulic configuration Rated pump motor output: 132 kW Installed heating capacity: 82 kW Number of heating zones on barrel: 7 Dry cycles (Euromap): 802 1/h Oil tank volume: 2,440 l Nedpfx Aoy T Hd Njc Hjdb Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel, and three USB ports

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 90 mm, razmak između stupova: 1.000 mm, tlak vbrizgavanja: 1.742 letvica, odmični hod: 2.000 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 8.000 kN Ndodpfsxup Nnex Ac Heb Največja sila odpiranja orodja: 356 kN Potisna sila gibljive odprte plošče: 98 kN Sila gibljive zapiralne plošče: 92 kN Dimenzije plošč (V x Š): 1.610 mm x 1.530 mm Razmak stebrov (V x Š): 1.120 mm x 1.000 mm Hod odpiranja orodja: 1.400 mm Minimalna višina orodja: 600 mm Maksimalna odprtina: 2.000 mm Hod hidravličnega izmetalca: 250 mm Premer polža: 90 mm L/D razmerje: 23 Vbrizgalni pritisk: 1.742 bar Vbrizgalni volumen: 2.863 cm³ Teža brizga (PS): 2.605 g PODROBNOSTI STROJA Dimenzije in teža Dimenzije (D x Š x V): 10.500 x 2.860 x 2.890 mm Teža: 43.000 kg Obratovalne ure: 70.000 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 120 mm, hod izmetalca: 300 mm, odmični hod: 1.900 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 9.500 kN Odpiralna sila: 665 kN Razdalja med stebri: 1.400 x 1.150 mm Montažne plošče: 1.960 x 1.710 mm Odpiralni hod: 1.900 mm Minimalna višina orodja: 500 mm Maksimalna višina orodja: 1.200 mm Maksimalna odprtina: 2.400 mm Hod izmetalca: 300 mm Nedpfexup Siox Ac Hsdb Visoko zmogljiv polž HPS-UN, premer: 120 mm Polmer šobe: 30 mm Premer odprtine šobe: 12 mm Premer polža: 120 mm Teža brizga (HDPE): 5.420 g Volumen brizga: 7.634 cm³ Specifični vbrizgovalni tlak: 2.257 bar PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 12.770 x 3.420 x 2.750 mm Teža stroja: 61,5 t

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Screw diameter: 90 mm Ndsdpfetunccox Ac Hsb Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Ndodpsymn Nfefx Ac Hob Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Stroke volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing throughput: 83 g/s Nozzle contact force: 173 kN Electrohydraulic Equipment: Rated power of pump motor: 75 kW Ndedpfx Acjv Stbme Hob Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Accessories: Oscillation elements Additional Equipment: - 1 x air valve - 8-way pneumatic cascade control - Accumulator - 2 x hydraulic core pulls on BWAP - 2 x hydraulic core pulls on FWAP - Robot interface according to EUROMAP 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Ndedpfx Aceymn Rvj Hob Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Mounting platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Min. mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd./rev.: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating power: 16 kW Cylinder heater control zones: 5 Oil capacity: 489 ltr. Dimensions and weight: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration isolators - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Ndodpfeydp Idjx Ac Heb Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Ndjdpfsub S R Hox Ac Hob Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Movable Platen Opening Force: 45 kN Ndedpfxjydp D Es Ac Heb Movable Platen Closing Force: 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Maximum Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force Forward/Return: 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Pump Motor Rated Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Control Zones: 5 Oil Capacity: 489 l Dimensions and Weights: Space Requirement approx.: 5.50 x 2.00 x 2.20 m Total Weight: 6600 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional Equipment: - 1x air valve - 2x core pull - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, tlak vbrizgavanja: 1.795 letvica, odmični hod: 2.100 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Mounting platen (H x V): 1,600 x 1,550 mm Clear space (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Max. mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Ndodjyv Acmspfx Ac Hjb Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Rated output of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Operating hours: 50,000 h EQUIPMENT Swing-out elements 1 x air valve Tie-bar pulling device 3 x hydraulic core puller at movable platen (BWAP) 2 x hydraulic core puller at fixed platen (FWAP) 20 x hot runner control zones Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Nodpfsycqc Tex Ac Hedb Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Vbrizgalni stroj Krauss Maffei 1000 Znamka: Krauss Maffei Nedjzg Uzyopfx Ac Hodb Model: KM 1000 - 8100 MX Zapiralna sila: 1000 t Plastifikacijska zmogljivost: 144 g/s Volumen injiciranja: 5453 cm3 Premer polža: 115 mm Horizontalna razdalja med stebri: 1400 mm Vertikalna razdalja med stebri: 1150 mm Širina plošče: 1960 mm Višina plošče: 1710 mm Minimalna/maksimalna debelina: 500/1200 mm Leto: 2006

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 Nedpfx Acsw Avafe Hedb MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN