Gildemeister Dmg Msl 60/7 nakup rabljenega (44.237)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Proizvajalec: DMG Tip: DMC 60 T Leto izdelave: 2011 Krmiljenje: Heidenhain iTNC 530 Približna masa stroja: cca 9 t Vpenjanje orodja: SK 40 Pomik X: 780 mm Pomik Y: 560 mm Pomik Z: 560 mm Območje vrtljajev: 12.000 min⁻¹ Število orodij v magazinu: 120 pozicij Notranja dovod hladilne tekočine: 40 bar 3D merilna sonda: Heidenhain TS641 Pomik osi C: 360° 5 osi: da Fgsdpfx Asxg Tdyoplob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: Fedpfx Apsxgnz Telsgb - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: rabljeno, Leto izdelave: 1996, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control system: Siemens Pallet size: 400x500 mm Table load capacity: 300 kg Feed rate: 40,000 mm/min Spindle speed: 20–8,000 rpm Spindle taper: ISO 40 Spindle power: 13/20 kW Torque: 191 Nm 4-axis horizontal machine Pallet changer Fgjdpfoyutu Ajx Aplsb Table indexing B-axis (4th axis): 0.001° Rapid traverse B-axis: 40 rpm KNOLL coolant system with filter and drag conveyor for chips, in excellent condition The technical data is as provided by the manufacturer and/or previous owner and is therefore non-binding. We reserve the right to prior sale; only our terms and conditions of business and sale apply. About us - Over 400 machines in stock - More than 15,000 m² of warehouse space, crane capacity up to 70 t - More than 10,000 accessories for your workshop available Looking to sell machines, production lines, or your business? Get in touch with us. More offers can be found on our website. Inspections possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2001, x-Weg 600 mm y-Weg 560 mm z-Weg 560 mm Tischfläche 500x400 mm Steuerung Siemens Typ 840 D Spindelaufnahme ISO 40 Spindeldrehzahlen 8000 U/min Palettenwechsler-Typ 2 Drehtisch 360 ° Werkzeugwechsler 40 Fgodpfx Apsyt Rw Selsb Maschinengewicht ca. 11,5 t Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 630 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, model krmilnika: Heidenhain MillPlus, največja hitrost vretena: 12.000 obr/min, Obdelovalni center z merilno tipalo! TEHNIČNI PODATKI X-pomik: 630 mm Y-pomik: 560 mm Z-pomik: 560 mm Število osi: 4 kosi Dimenzije mize: 1000 x 600 mm Hitrost vretena: 12.000 vrt/min Hitri pomik: 30 m/min Fgodpfexb Rqmox Apleb Menjalec orodij: 24-pozicijski PODROBNOSTI STROJA Krmiljenje: Heidenhain MillPlus

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. No.: 10489 Manufacturer: DMG Model: DMC 60 U duoBLOCK Year of manufacture: 2011 Control type: CNC Control system: SIEMENS SINUMERIK 840D Location: Halberstadt Country of origin: Germany Machine No.: 11XX000XX01XX Comprehensive overhaul: 2025 X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-axis: -30° to 180° C-axis: 0.00° Spindle taper: HSK A63 DIN 69893 Max. workpiece weight: 600 kg Max. rotary table diameter: 630 mm Table rotation speed range: 40 rpm Tool magazine capacity: 60 pcs. Stepless speed range: 20 – 18,000 rpm Max. torque: 121 / 82 Nm Feed force (X/Y/Z): 10 kN Rapid traverse X/Y/Z: 60,000 mm/min Spindle motor output: 28 / 19 kW Acceleration: 6 m/s² Total power requirement: 55 kW Approx. machine weight: 12 t Approx. dimensions (LxWxH): 7.0 x 5.0 x 3.2 m Number of pallets: 2 Pallet size (LxW): 630 x 630 mm Tool change time: 3.7 sec Additional information: DMG DMC 60 U – 5-axis universal machining centre (year 2011) The machine is still in production and has been used exclusively for aluminium machining in single-shift operation. It is equipped with a pallet changer and a high-pressure coolant system (30 bar). In 2024, extensive maintenance and renewal works were carried out: ✅ All axes (except Z-axis) renewed Fgedpfx Aeycpxgopleb ✅ Guide rails replaced ✅ Spindle overhauled Complete maintenance and service reports, as well as all relevant documentation, are available in full. Further technical data: 🔹 Working areas: Distance spindle centre – table (horizontal): 20 – 620 mm Distance spindle centre – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & accessories: ✅ Complete documentation available ✅ Swarf conveyor for efficient chip removal ✅ Coolant system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimum performance ✅ Pallet changer for uninterrupted operation ✅ Rotating viewing window for a clear view of the machining process ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for convenient operation ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant cleaning ✅ Spindle oil cooler for thermal stability The machine can be inspected and tested during ongoing production by arrangement. 📍 Availability: By agreement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 87.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 410 mm, hitrost vretena (min.): 22.000 obr/min, Na prodajo je CNC stružni center proizvajalca DMG, tip CTX beta 800, letnik 2009. Stroj je v dobro vzdrževanem in popolnoma delujočem stanju. Tehnično brezhiben in takoj pripravljen za uporabo. Tehnični podatki: Tip stroja: CNC stružni center Proizvajalec: DMG Tip: CTX beta 800 Letnik: 2009 Krmiljenje: Heidenhain 4290 Maks. dolžina struženja: 600 mm Orodna glava: 12-pozicijska Vpenjanje orodja: VDI 40 Obratovalne ure: cca 87.000 h Ure vretena: cca 22.000 h Linearno vodilo Z1 nedavno zamenjano Pogonski motor revolverja S2 je bil pred kratkim zamenjan Stroj je bil redno servisiran s strani servisa za stranke Fgjdpfxjyq Hq Nj Aplob Tehnično brezhiben in popolnoma funkcionalen Ogled pod napetostjo možen po dogovoru Na voljo so servisna in vzdrževalna poročila Velik paket dodatne opreme Pogonska orodja proizvajalca WTO Dodatna dokumentacija in slike na zahtevo Na voljo: od julija 2026 Za več informacij pišite ali pokličite Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), A DMG CNC universal machining center is available. Travel paths X/Y/Z: 780mm/560mm/560mm, spindle speed: 12,000 rpm, tool stations: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42,603h, spindle hours: 20,137h. Includes rotary pallet changer, BLUM laser, 3D probe TS 641, chip conveyor, 40 bar through-spindle coolant (IKZ), 900L coolant tank, and Rotoclear. Documentation available. On-site inspection possible. Fedpfx Ajv Exrksplsgb

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Hod X/Y/Z: 600mm/700mm/800mm, Ločljivost: 0,001mm, Vhodna enota: 0,001mm, Pozicijska toleranca: 0,01mm, Podajalna hitrost: 15m/min, Hitri premik: 40m/min, Število vrtljajev: 18000obr/min, Moč: 31kW, Krmiljenje: Heidenhain MillPlus. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fodsx U Dwiopfx Aplogb

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Gildemeister. Premer vrtenja nad ležiščem/vozičkom: 600 mm / 360 mm, dimenzije ležišča X/Y: 350 mm / 450 mm, dolžina vozička: 620 mm, širina vozička: 250 mm, pot vozička: 1100 mm, premer vpenjalne glave: 315 mm, premer vretena: 107 mm, premer osi vretena: 140 mm, moč vretena: 30 kW, navor: 950 Nm, število vrtljajev: 3150 obr/min, hitro premikanje X/Z: 10 m/min / 5 m/min. Premer konjička: 100 mm, hod konjička: 180 mm, maks. pritisk konjička: 1200 daN, dolžina struženja: 1000 mm. Mere stroja X/Y/Z: cca. 4350 mm / 2050 mm / 2000 mm, teža: cca. 6400 kg, delovnih ur: 49811 h. Na voljo je dokumentacija. Možen je ogled na lokaciji. Fgedpox R Duaefx Aplsb

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Gildemeister, vključno s transporterjem za ostružke in vpenjalom Forkat. 1) Gildemeister NEF CT 60, letnik: cca 1982, razdalja med konicami: 1000 mm, dolžina struženja: 1000 mm, maks. premer struženja: 460 mm, višina konice: 300 mm, širina postelje: 450 mm, vretena izvrtina: 107 mm, hitrost vrtenja: 3015 o/min, število orodnih mest: 12, premer pinole: 100 mm, hod pinole: 180 mm, dimenzije stroja X/Y/Z: cca 5400 mm/2100 mm/2000 mm, teža: cca 7000 kg. 2) Transporter za ostružke Allweiler GB 30L 38L. Brez filtra. Dokumentacija na voljo. Možen ogled na lokaciji. Fsdpeydp Azjfx Apljgb

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatizirano ravnanje s paletami DMG Mori za obdelovalne centre. Število mest za palete: 7, največja teža obdelovanca: 250 kg, največji premer obdelovanca: 500 mm, največja višina obdelovanca: 400 mm, čas menjave palete: manj kot 40 s. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fodoydd Acjpfx Aplegb

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12,000 rpm, tool stations: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62,659h, spindle hours: 38,299h. Includes rotary pallet changer, BLUM laser, 3D probe TS 641, chip conveyor, 40 bar internal coolant supply, 900l coolant tank, and Rotoclear. Documentation available. On-site inspection is possible. Fjdpfxjv Exrdj Aplsgb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, največja hitrost vretena: 8.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machining center with large tool magazine and ICS! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Feed and rapid traverse Feed rate X/Y/Z axis: 1 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Z: 9,600 N Feed force Y: 8,000 N Feed rate B-axis: 9,250 °/min B-axis: 360 × 0.001 ° Spindle Fgedpfx Apewynxzslob Spindle speed – stepless: 8,000 rpm Drive power 40% duty cycle: 20 kW Drive power 100% duty cycle: 13 kW Torque at 40% / 100% duty cycle: 191 / 124 Nm Tool holder: SK40 Pallets and workpiece Pallet size: 2 × 400 × 500 mm Max. workpiece weight: 600 kg Tool magazine Tool magazine: 180 positions Tool diameter: 90 mm Tool diameter with 2 empty adjacent stations: 160 mm Max. tool length: 350 mm Max. tool weight: 3.50 / 12.00 kg Control Control: SIN840D MACHINE DETAILS Electrical data Total power requirement: 65 kW Weight and dimensions Machine weight: approx. 16.00 t Space requirement: approx. 9.00 × 4.50 × 3.50 m Operating hours: 38,826 h EQUIPMENT Coolant system with ICS (internal coolant supply) Double chain magazine with 180 positions Chip conveyor BLUM tool laser measurement Electronic handwheel

Stanje: rabljeno, Leto izdelave: 2018, Pretok 600 l Tlak črpalke 2 / 3 / 40 bar Krmilnik Kontaktorji Skupna potrebna moč 11 kVA Teža stroja pribl. 450 kg Prostorske zahteve pribl. 1,80 x 1,35 x 1,70 m Hladilna naprava INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - zelo dobro stanje - priključeno na DMU 50 3rd Edition - krmiljenje prek kontaktorjev - vključno s papirnatim trakom filtrom - Število črpalk: 3 - Moč črpalk: 0,63 kW, 2.750 o/min (50 Hz), 60 l/min, 20 m Fgedpfx Aox Urn Aoplob 2,89 kW, 3,75 KM, 2.880 o/min (50 Hz), 24/22-30/27 l/min 3,10 kW, 4,20 KM, 2.930 o/min (50 Hz), 160 l/min, 40 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 9.848 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1116 000179 3, potovalna razdalja osi X: 600 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Fedpfxjwxybfj Aplogb Available spindle torque: see diagram in PDF Motor power at 100% duty cycle: see diagram in PDF Motor power at 40% duty cycle: see diagram in PDF Spindle speed, infinitely programmable: 20–12,000 rpm Spindle speed in setup mode: 20–800 rpm Magazine slots: 30 Measuring System Resolution X-, Y-, Z-axis: 0.001 mm Input increment X-, Y-, Z-axis: 0.001 mm Position tolerance X-, Y-, Z-axis: 0.010 mm Feed drive Motors: AC brake motors for X, Y, Z axis Feed rate X-, Y-, Z-axis, infinitely programmable: 20–15,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min Setup mode X-, Y-, Z-axis: 20–2,000 mm/min NC Rotary Table Clamping surface: Ø630 mm T-slot spacing: 63 mm Number of T-slots / size: 9 / 14 H7 Centering bore: Ø50H6 mm Holding torque at 100% duty cycle A-axis: 3,866 Nm Holding torque at 100% duty cycle C-axis: 6,008 Nm Max. table rotation A-axis: 7.3 rpm Max. table rotation C-axis: 7.0 rpm Swivel range A-axis: ±45 / 30° Rotation range C-axis: n x 360° Tool holder: SK40 Operating hours Power-on hours: 35,099 h Spindle hours: 9,848 h

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface Fgedsvr Eh Eepfx Aplsb • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Velikost mize: premer 600 x 500 mm, nosilnost mize: 400 kg, posamične pomike XYZ: 600 x 500 x 500 mm, B-os: -5/+110 stopinj, C-os: 0,001 stopinje, hitri pomiki: 80 m/min, menjalec orodij s 120 postajami, stožec vretena: HSK 63, hitrost vretena: 20.000 vrt/min, Fedpjwnpzajfx Apljgb krmilnik Siemens 840D eRGOline, trakasti transporter za odrezke, hlajenje skozi vreteno.

Stanje: zelo dobro (rabljeno), CTS Type: CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing -60 to 120°C Description: For sale: a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climate and temperature test chamber for use in industry, research, and quality assurance applications. The unit simulates extreme environmental conditions to test components, modules, or entire systems under realistic load scenarios. The climate test chamber enables: Fgedpfx Apjylxaxsleb - Temperature tests from –60 °C to +120 °C - Climate tests with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance/load testing The air circulation system ensures very uniform temperature distribution throughout the 7 m³ test chamber. Technical data: Temperature: –60 °C to +120 °C Change rate approx. 2 K/min Humidity: 10–95% rH Dew point range +5 °C to +89 °C Refrigerants: R404A/R23 Max. permissible pressure: 25 bar III.6 Quick guide Dimensions: Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see image) (All technical data and specifications are subject to change and error!) Please feel free to contact us by phone for further questions.

Stanje: rabljeno, Leto izdelave: 2011, Decoiler Coil weight / load capacity: 4.5 t Maximum strip width: 520 mm Coil outside diameter: 1600 mm Expansion range: 460 - 530 mm Straightening unit Strip pass-through width: 20 - 400 mm Number of straightening rollers: 7 pcs. Fodpfxjuqfa Is Aplogb Diameter of straightening rollers: 60 mm Number of pinch rollers: 4 pcs. Diameter of pinch rollers: 60 mm Strip thickness: 0.4 - 3.5 mm Line speed: 2 - 10 m/min Roll feeder Maximum strip width: 310 mm Max. strip thickness: 3.0 mm Strip thickness at maximum width: 2.8 mm Strip thickness at maximum cross section: 850 mm² Number of feed rollers: 2 pcs. Diameter of feed rollers: 80 mm Maximum feed speed: 104 m/min Drive power: 1.5 kW Standard equipment: Coil loading station Effective stroke: 500 mm Load capacity: 5,000 kg Max. strip width: 500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 23.574 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, model krmilnika: Siemens Sinumerik 840D, največja hitrost vretena: 8.000 obr/min, The following components of the machine have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis: 360 x 0.001 (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Fgjdpfx Apsy Nbuneljb Coolant supply: 50 bar Coolant system: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total connected load: 20 kW Dimensions & Weight Space requirements (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating Hours Power-on time: approx. 48,804 h Spindle runtime: 23,574 h total EQUIPMENT - Documentation/manual - Infinitely variable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage control in the machining area - Pallet storage (4 positions) - Pallet sequence operation - Enclosed work area guard according to UVV - Network capability - Technical documents & installation plan

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 10.014 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00340000910, stružna dolžina: 1.290 mm, premer struženja: 640 mm, moč vretenovega motorja: 46.000 W, največja hitrost vretena: 2.000 obr/min, izvrtina vretena: 95 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 1.200 kg, sila podajanja os X: 9.500 N, podajalna sila osi Z: 15.500 N, Oprema: dokumentacija / priročnik, Tehnični podatki v prilogi. Fgjdpfx Apsy Emx Rjlob

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, proizvajalec krmilnikov: HEIDENHAIN, skupna masa: 15.070 kg, največja hitrost vretena: 14.000 obr/min, število mest v zalogovniku orodij: 30, število osi: 5, Táto 5-osá DMG DECKEL MAHO DMF 260|11 bola vyrobená v roku 2012. Disponuje otáčkami vretena 14 000 min⁻¹ a zásobníkom na nástroje s 30 pozíciami, čo umožňuje efektívnu správu nástrojov. Stroj je vybavený naklápateľnou frézovacou hlavou a NC otočným stolom, ktoré zvyšujú jeho univerzálnosť. Ak hľadáte vysokokvalitné možnosti obrábania, zvážte vertikálne obrábacie centrum DMG DECKEL MAHO DMF 260|11, ktoré ponúkame na predaj. Pre viac informácií nás kontaktujte. • Príkon: 46 kVA • Napätie: 400 V 3/N, PE Fjdpfxoy Nyvwe Apljgb • Frekvencia: 50/60 Hz • Menovitý prúd (In max): 66 A • Maximálne istenie: 80 A • B-os: Naklápateľná frézovacia hlava • C-os: NC otočný stôl (ľavá strana) • Chladenie: Chladiaca jednotka pre pohony • Osvetlenie: LED strojové svietidlo • Pohony osí: X/Y/Z posuvové pohony Doplnková výbava • Oplachovacia pištoľ Technická špecifikácia Upínací kužeľ SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, For sale: CNC LATHE GILDEMEISTER CTX600E V3 with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Control: Heidenhain 3190 Country of origin: Germany Year of production: 1998 Machine specifications: - Turret: 12 tool stations, VDI-50 holders (6 driven positions) - Max spindle speed: 3,600 rpm - C-axis - Driven tools - Hydraulic tailstock - Tool measurement probe - Max turning diameter, X-axis = 600mm Fgodpfx Apsy Rbukoljb - Max turning length, Z-axis = 1000mm - Coolant system - 3-jaw hydraulic chuck, 400mm - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading onto truck included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 19 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a meticulous technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Each machine can be tested under production conditions as we also specialize in metal cutting. After the purchase, we offer crew training and can set up part production at the client's facility. We cooperate with many companies on a regular basis, supplying them with subsequent machine tools.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 11.223 h, največja hitrost vretena: 20.000 obr/min, skupna višina: 800 mm, širina mize: 650 mm, potovalna razdalja osi X: 750 mm, pomik osi Y: 650 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, število mest v zalogovniku orodij: 60, število osi: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It offers an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking for high-quality machining capabilities, you should consider the universal machining center DMU 75 MonoBlock from DMG MORI, which we are offering for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle hours: 11,223 h • Machine operating hours: 32,851 h • A-axis range: +/- 120 degrees Fodpfx Apjy Ndg Tolegb • C-axis range: 360 degrees • Table: Integrated CNC rotary table (diameter 650 mm) with a table surface of 800 x 650 mm • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN probing system • Chip management: Chip conveyor • Coolant: Internal coolant supply (ICS / IKZ) 40 bar • Coolant tank: 600-liter capacity with paper band filter • Cleaning: Spray gun (rinsing gun) • Extraction: Extraction system (mist separator) • Table type: Integrated swivel rotary table Additional Equipment • Infrared probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D quickset preparation • Coolant ring nozzle • Air blast • Operating mode 4 (BA4) • Safety glass windows • DMG Netservice customer • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant: Yes Taper Size: SK 40