Elumatec Stiskalnica Za Kotne Spoje Za Izdelavo Aluminijastih Oken nakup rabljenega (83.734)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz: - RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001 - RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001 - FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001 Ppjdpfsy Swfzjx Aa Dst - RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001 Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Stanje: dober (rabljeno), vhodna napetost: 400 V, delovna širina: 600 mm, skupna širina: 3.480 mm, skupna dolžina: 1.400 mm, skupna višina: 2.640 mm, vrsta vhodnega toka: trifazni, skupna masa: 2.000 kg, König Eco Twin 800 Pedpfx Ajx Ncc Tsa Dept Glavni stroj za deljenje in oblikovanje testa Classic König Rex 6-vrstni S separacijskim trakom, komoro za vzhajanje Odlagalna naprava za 60x80 Izvedba iz nerjavečega jekla Priključek 400V, 16A CEE vtič Mere: pribl. 3480 x 1400 x 2640 mm (ŠxGxV) Rabljeni stroj Na zalogi imamo še druge pekarske stroje!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 3 meseci, delovna širina: 250 mm, skupna širina: 2.300 mm, skupna dolžina: 750 mm, skupna višina: 1.370 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, širina transportnega traku: 250 mm, leto zadnje generalne obnove: 2026, Stroj za žemljice Lippelt Mini Rustica za vse vrste posebnih žemljic izvedba iz nerjavečega jekla enostavna in učinkovita izdelava kvadratnih kosov testa brezstopenjska nastavitev dolžine reza rezalne valje NOVO prevlečene stroj je premičen enostavna robustna tehnika samo pri nas DGUV V3 testiran Ppodpfxjx I U H Us Aa Dst priklop 400V, 16A-CEE vtič Mere: D 2300 x Š 750 x V 1370 mm Rabljen stroj, očiščen & preverjen po SAB z garancijo + servis rezervnih delov Možnosti: Rumo postaja za semena vzdrževalna pogodba servisni paket škatla rezervnih delov dostavna storitev uvedba in zagon Na zalogi imamo še več pekarskih strojev!

Stanje: dober (rabljeno), vhodna napetost: 400 V, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 2.500 kg, König tračna naprava za testo Lijak z oljenjem S štanco in odlaganjem Izmenljivi rezalni valji Maksimalen pretok testa: 600 kg/uro Zmogljivost do 7500 kos/uro Izvedba iz nerjavečega jekla Dimenzije pribl. 6215 x 1000/1800 x 2555 mm (ŠxGxV) Ppsdpfx Asx Ncddsa Dot Priključek 400V, 32A CEE vtikač Rabljeni stroj Na zalogi imamo še več pekarskih strojev!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 110 789, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, - Lamelna korpusna stiskalnica - Delovno območje: - Širina od 150 do 2.500 mm, višina od 150 do 1.400 mm; globina 700 mm; - Moč je nastavljiva = 1000/1500/1800 daN (kg) - Timer = samodejno odpiranje po preteku nastavljenega časa - Teža: ca. 1800 kg - Zelo dobro stanje, vse deluje Ppjdpfx Asy Uxzvsa Djt - Možen preizkus delovanja

Stanje: novo, Na prodaj: Autobag vrečke v dimenzijah 150x250 – 1,5 milijona vrečk Pedpfx Aaju Ni Rpo Dept 200x320 – 2,5 milijona vrečk Cena v evrih na paleto: 1 paleta: 0,02 € na vrečko 2 paleti: 0,019 € na vrečko 3 palete: 0,018 € na vrečko 4 palete: 0,017 € na vrečko 5 palet: 0,016 € na vrečko in tako naprej 10 in več palet: 0,01 € na vrečko 1 mio. Autobag vrečk od 0,01 € za kos

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Ta naprava je prilagojena podjetjem, ki iščejo enostavno in zanesljivo rešitev za pakiranje. Največja hitrost je do 1500 vrečk na uro. Enostavno upravljanje poteka v dveh enostavnih korakih: polnjenje vrečke od zgoraj in zapiranje vrečke. Naprodaj so Autobag vrečke v velikostih: 150 × 250: 1,5 milijona vrečk 200 × 320: 2,5 milijona vrečk Cena za polno euro paleto: 1 paleta: 0,025 € na vrečko Ppsdor E Dpzjpfx Aa Dst 2 paleti: 0,019 € na vrečko 3 palete: 0,018 € na vrečko 4 palete: 0,017 € na vrečko 5 palet: 0,016 € na vrečko in tako naprej 10 ali več: 0,01 € na vrečko 1 milijon Autobag vrečk že od 0,01 € na kos Trenutno rezervirano

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V1 01HOHS300KET5ESGR0SZ580, trajanje garancije: 12 meseci, The machine is usually always in stock with us. Short delivery times are possible. System Features 1. Chain conveyor belt, 2.5 meters length (other lengths available upon request) 2. Adjustable bag former 3. Double film unwind + automatic film centering device 4. Rotary end sealing, single sealing jaw Pjdpfxjq Ikgkj Aa Dspt 5. Robust, medium-sized fin sealing structure 6. Four servo-controlled drives: - Active material feed shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material and number of sealing jaws) 5. Maximum film width: 500 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. Overall power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, Production Orientation: Vertical Conveying System: Infeed and outfeed optional and product-dependent Film Feeding: Rear Former/Bag Forming Shoulder: Fixed Operator Display: Touchscreen with memory function Drives & Control: 3 servo motors and PLC control Ppodpfx Aoq Ikhaea Det Packaging Length: 50-190 mm Packaging Width: 50-150 mm (depending on film width) Packaging Height: depending on forming shoulder Speed: 15-30 bags/min depending on material, packaging size, and product Film Width: 110-320 mm Power Consumption: approx. 4.6 kW Machine Material: 304 stainless steel, surface-treated Printer Mount: suitable TTO or ink wheel printer available as optional extra for surcharge Delivery Time: Current delivery time under 10 weeks Z Conveyor System: €8,500 Features: - Stainless steel construction, also suitable for food industry - Application: granular products and small parts such as screws - Sectors: Pet food, food industry (e.g. coffee, nuts), metal industry - Simple touchscreen control with color icons - Safety guards included - Compatible with upstream and downstream machines - Customer-specific modifications/designs on request - 12-head combined weigher integrated, 0.8L hopper Additional options (on request and at extra cost): - Eurohole punch etc. Production orientation: vertical

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Flowpack, Leto izdelave: 2023, - Short delivery time, under 10 weeks! - Model designation: Rotection Flow Wrapper PU Features: Steel frame/stainless steel construction, manual unwind shaft fixation without compressed air, automatic roll centering for precise application, automatic stop for empty products (no product – no bag), easy touchscreen operation via color symbols. Continuous product infeed controlled by sensors, print mark sensor included, safety guard covers. Three-sided fin seal packaging, longitudinal seam on the bag underside, rotary cross sealing system. Can be integrated with upstream and downstream machinery; customer-specific modifications/constructions on request. Additional options (upon request and surcharge): Thermal transfer printer, e.g. best-before date, print width up to 60mm, stainless steel finish/paint, cooling applications for ice packaging, zig-zag knife, Euro slot punch, etc.; applications for shrink film (flow shrink), gas flushing units for modified atmosphere packaging (extended shelf life), automatic product feeding systems, intermittent feed units, perforation units (tear thread) for easy opening, photoelectric length-dependent product detection. Production alignment: Horizontal Conveying system: optionally chain conveyor or belt conveyor, length as requested Film feed: from below Forming shoulder: flexible and fixed Operator display: 10" touchscreen with memory functions, swivelling with boom arm for comfortable operation Drives & control: 8 servo motors and PLC control Packaging length: 120-600 mm Packaging width: 70-250 mm (depending on film width) Packaging height: max. 80 mm (depending on forming shoulder) Podpfeq Ikfmox Aa Dspt Speed: 25-100 bags/min Film width: 200-600 mm Power consumption: approx. 7 KW Power supply: 220-240 V / 50 Hz / 1-phase Machine weight: approx. 1000 kg Machine dimensions: approx. 5230 x 1380 x 1460 mm Machine material: 304 stainless steel Print mark sensor: Yes External compressed air required: Yes Printer mounting: available at extra cost Delivery time: Current delivery time under 10 weeks

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Charakteristiky zařízení 1. Řetězový dopravník, délka 2,9 m (jiné délky na přání) 2. Dvě zakázkově vyrobené klece s pevnými tvářecími rameny dle rozměrů produktu 3. Jednotlivý podavač fólie + automatické centrování fólie 4. Koncová uzavírací jednotka s box-motion pohybem, jednočelistové těsnění 5. Masivní, středová lamelová těsnicí konstrukce 6. Osm servopohonů 7. Ovládací panel HMI 8. Čtyři samostatné regulátory teploty 9. Skříň z nerezové oceli 304 10. Dokumentace v místním jazyce 11. Řízení tiskových značek 12. Programovatelná délka sáčku 13. Standardní směr pohybu zleva doprava Technické parametry 1. Délka produktu: 120–600 mm 2. Šířka produktu: 70–250 mm 3. Výška produktu: 20–120 mm 4. Rychlost balení: až 60 produktů/min (dle produktu, délky sáčku a materiálu) 5. Max. šířka fólie: 600 mm 6. Napájecí napětí: 1F. 220 V 50 Hz 7. Celkový příkon: cca 8,8 kW 8. Hmotnost stroje: cca 1100 kg Ppjdjk Dz Hwepfx Aa Dot 9. Rozměry stroje: cca 4500 x 1070 x 1590 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, In stock, available immediately – we are happy to advise you! The Rotection flow wrapping machine is suitable for packaging a variety of products. A large operating display (HMI) ensures easy access to all necessary parameters required for machine setup, such as bag length, speed, etc. We are happy to conduct a preliminary test with your product to present you with performance results. Model designation ////: Rotection Flow Wrapper Pjdpfxjinwi Hj Aa Djpt Operating display ////: 6.8" display Drives ////: Servo Packaging length ////: 40–400 mm Packaging width ////: 35–160 mm (depending on film width) Packaging height ////: Depends on forming shoulder Speed ////: 80–100 bags/min continuous operation Speed ////: Up to 70 bags/min intermittent Film width ////: 90–400 mm Power consumption ////: 5 kW Power supply ////: 220–240 V / 50 Hz / single-phase Machine weight ////: approx. 400 kg Machine dimensions ////: approx. 4000 x 930 x 1370 mm Error rate ////: < 5% *The specifications above refer to Model: RMFP70. This is a horizontal packaging machine. You will find various models from our machine portfolio in the image gallery. Of course, we also offer state-of-the-art box-motion flow wrapping systems. In order to offer you the most suitable packaging solution for your requirements, our engineers will be happy to consult and assist you. Naturally, we provide custom mounting frames for the integration of thermal transfer printers, or can supply a compatible solution upon request.

Stanje: rabljeno, Tehnične podrobnosti: Dolžina stebla: maks. 30 mm Zmogljivost: 600 kos/min Največji premer žice: 5 mm Delovno območje: 30 mm Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m Dimenzije stroja: 2,95x1,5x2,15 m Dimenzije odvijalnika: 1,15x1,15x1,15 m Mehanska stiskalnica za hladno preoblikovanje Ppjdpou Nfrcjfx Aa Dst Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca) Naprava je posebna izvedba in neuporabljena (kot nova). Pribor: - odvijalnik - navodila za uporabo Stroj je možno prikazati v obratovanju. i.D.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, delovna širina: 250 mm, skupna širina: 2.350 mm, skupna dolžina: 815 mm, skupna višina: 1.650 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 400 kg, širina transportnega traku: 250 mm, leto zadnje generalne obnove: 2026, TOP naprava za žemljice Lippelt Mini Rustica GS Glavni stroj za posebne kvadratne žemljice Pedpex I U Thsfx Aa Djpt z giljotino in štanc napravo Moka za vhodni trak LED upravljanje, Izvedba iz nerjavečega jekla Trakovi NOVI Stroj na kolesih Samo pri nas: DGUV V3 preizkušeno Priključek 400 V, vtikač 16ACEE Mere: 2350 x 815 x 1650 mm (ŠxGxV) Rabljena naprava, očiščena in servisno pregledana z garancijo + servis rezervnih delov Možnost: Rumo postaja za semena Rezilni valj Štancanje Vzdrževalna pogodba Servisni paket Škatla rezervnih delov Dostava Uvajanje & zagon Več žemljičnih naprav je na zalogi!

Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm Odpiralna širina: 300 mm Število etaž: 1 kos Teža stroja ca. 3 t Ppsdey Ty E Tspfx Aa Det Leto izdelave: neznano

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale Psdjchqxxspfx Aa Dopt -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net Ppjdpfsd Nm Siex Aa Det (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Ppjdpfxsgl Nlme Aa Dot Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Psdov Rpxlopfx Aa Dept Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Ppodjxfwdopfx Aa Djt Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Ppsdpofci D Asfx Aa Dst Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months Podpfjgfm Ryex Aa Dopt The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm Ppsdpfxjt Hxuds Aa Djt *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: Podpsw Ig Sujfx Aa Dopt - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pjdod N Dnhspfx Aa Dspt Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result