Elumatec Atlanta Sem Vijačni Vtič nakup rabljenega (5.261)

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Kdodpsyktrtjfx Acwel Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) Kdsdsykuiaopfx Acwel F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS04, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film application and cutting. 99 individually programmable programs Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch: 120-400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled by control unit Quick-load IEF system for easy film roll change Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height "machine with mast (pallet included): 2,150 mm Height detection by light sensor or by manual input via display Protective bar for emergency stop of drive unit Emergency stop switch compliant with CE regulations Kdjdpfsykug Sjx Acwel Acoustic warning signal and warning light when machine is started Fall protection for the film carriage Pushbutton for start & stop Machine operation compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Carriage speed independently adjustable upwards and downwards - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting of pallet wrapping height - Film application tension for base & top wrap / ascent & descent independently adjustable - Film pre-stretch for base & top wrap / ascent & descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (only upwards or only downwards) - Wrapping cycle with defined start and stop height - Wrapping to a saved height (switching off light sensor for height) - Wrapping cycle for large-sized pallets - Wrapping cycle for top sheet film - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film breakage on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Other units available from stock in Ludwigsburg for immediate delivery

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Ksdpfsykub Aox Acwjdl Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED display - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive system - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light on machine start-up - Fall protection for the film carriage - Push buttons for Start & Stop - Machine function per CE regulations Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: - All operating parameters adjustable via display - F00 – Display lock for program change - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up/down independently adjustable - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film application tension for foot & head wrapping / upward & downward travel adjustable independently - F17–F20 – Film pre-stretch for foot & head wrapping / upward & downward travel adjustable independently - F62 – Ergonomic height for film change - Display of film consumption (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop height - F12 – Wrapping to a stored height (with deactivation of photoelectric sensor for height) - F21 – Wrapping cycle for large pallets - F22 / F23 – Wrapping cycle for top sheet - F29 – Softstart cycle for application of edge protection - F30–F31 – Wrapping cycle with reinforcement and adjustable wrap count - Softstart to reduce film tears on sharp pallet edges - Wrapping cycle with manual or motorized rope forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Brake manually adjustable from the carriage using tension roller - Film specifications: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm - Option: Stretch film with core Ø50 mm or coreless stretch film - Standard connection values: 230 V – 1L+N+PE – 50 Hz Available options: - Wrapping height up to 3,500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% Kdodpfx Acoykty Djwel - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic rope forming for wrap reinforcement - Automatic cutting system to produce 3 strips for “BANDEROLL WRAPS” - Cold-store version for operating temperatures down to -5° C - BATTERIES: LITHIUM RELION 2 x 12V Additional units available from stock in Ludwigsburg. Image may differ from actual product.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23EVA01,

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, model krmilnika: E555 Touchscreen, skupna masa: 2.300 kg, dolžina rezanja (maks.): 6.000 mm, premer žaginega lista: 550 mm, največja hitrost vrtenja: 2.800 obr/min, TEHNIČNI PODATKI Maksimalna dolžina reza: 6000 mm Premer žaginega lista: 550 mm Hitrost žaginega lista: 2800 vrt/min Kdedpfx Aoy Egahjcwsl PODATKI O STROJU Krmiljenje: E555 zaslon na dotik Dovod stisnjenega zraka: 7 barov Dimenzije in teža Dimenzije (D x Š x V): 7500 x 1500 x 2000 mm Teža: 2.300 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Lot 3 kopirnih rezkalnih strojev Elumatec KF78/23. 2 popolnoma delujoča (100%). 3. je 50% delujoč, vendar ga je mogoče brez težav obnoviti ali uporabiti za nadomestne dele. Priloženi so različni rezervni deli. Horizontalna obdelovalna površina: Z omejevalom: 300 x 100 mm S šablono: 270 x 70 mm Kedpfx Acoyzfl Iewodl Vertikalna obdelovalna površina: Z omejevalom: 290 x 100 mm S šablono: 230 x 70 mm 12.000 vrt/min Obseg vpenjanja: 150 x 150 mm Napajalna napetost: 230/400V, 3-fazna Cena za komplet 3 strojev, brez dovajalnih miz.

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040505, 4-osno delovno središče uporabna dolžina: 7,6 m 12 pnevmatskih sponk Kdedsy R R Iyjpfx Acwel 2 delovni coni

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20303, dolžina rezanja (maks.): 4.500 mm, premer žaginega lista: 500 mm, pritisk: 7 letvica, Pnevmatski naklonski razpon od 90° do 45° Premer žaginega lista 500 mm Hitrost žaginega lista 2.800 vrt/min Napajanje 230/400 V, 3~, 50 Hz Izhodna moč 4 kW Pritisk stisnjenega zraka 7 bar Poraba zraka na delovni cikel 20 l brez pršenja, 32 l s pršenjem Idealni stroj za visokoserijsko proizvodnjo pri rezanju pri 90° in 45° Navpična pnevmatska enota za vpenjanje materiala Stroj je pripravljen za obratovanje Kjdjy Ah Hkjpfx Acwedl Nudimo strokovno montažo

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Kdedjw A Rv Ijpfx Acwsl Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 1999, stanje: rabljeno, Rabljeni stroj Leto izdelave 1999 Veliko območje rezkanja kljub kompaktni zasnovi Kopirno rezkanje po stranskih vodilih ali šabloni v razmerju 1:1 Pnevmatska kopirna igla, dvostopenjska za dva različna premera rezkarjev Patentirano obešanje kopirne ročice zagotavlja natančne izreze z majhno silo Nastavitev višine mize za izjemno visoke profile do 400 mm Enostavna menjava orodja preko „Spindle lock“ Pnevmatska naprava za vpenjanje materiala Sistem za dozirno pršenje Opcije Kopirne šablone zarezane za standardno odprtino za kljuko in PZ-rezkanje Kopirna igla Vpenjalna puša Sistem zaustavljanja Vpenjalna naprava z 2 vpenjalnima cilindroma Rezkalno orodje 8 mm Dobavljivost: takoj Kodpfexqihisx Acwjdl Lokacija skladišča: Flörsheim

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), Stroj je popolnoma delujoč. Trenutno je na zalogi. Kodpfjhvrz Tjx Acwjdl 6.000 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 1423530534, Ponudba 26120 Tehnični podatki: - Premer žaginega lista pribl. 500 mm - Hitrost vrtenja žaginega lista 2800 min⁻¹ - Območje reza npr. do pribl. 180 x 150 mm ali 150 x 200 mm - Dolžina pomika pri 90° rezanju: 5 – 600 mm - Poševni rezi do 45° mogoči - Priključek na stisnjen zrak: 7 bar - Poraba zraka na delovni cikel brez / s pršenjem: 50 / 64 l - Pogon: 400 V / 4,0 kW - Potrebni prostor pribl. Š 2750 x V 1600 x G 1350 mm Kdedpfsy Efl Nox Acwol - Teža pribl. 800 kg - z: digitalnim prikazovalnikom, pnevmatskim vpenjalom, samodejnim izklopom na koncu profila

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Oprema: dokumentacija / priročnik, Tehnične podatke in rezalni diagram lahko prenesete ob strani. 730 mm na hod, omejeno na 3 ponovitve. Žagine liste Ø 500 x 4,4 x 30 mm. Rezanje le pod kotom 90°. Maksimalna dolžina reza pri 3 ponovitvah: 2180 mm. Kdodpfoy D Sywjx Acwel

Stanje: rabljeno, Leto izdelave: 1998, Stroj za vrtanje vratnih tečajev za obdelavo aluminijastih profilov s pnevmatskimi sponami za material ter mikro pršilnikom. Dolžina obdelave: maks. 2400 mm Širina profila krila: maks. 108 mm Širina profila okvirja: maks. 200 mm Višina profila: 45–80 mm Kjdpfx Acoy Anhnewedl Hitrost vretena: 1900 vrt/min Teža: cca 500 kg

Leto izdelave: 2001, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8340020123, Naprodaj čistilni stroj ELUMATEC EV 834. Stroj je delujoč. Kjdpfsy Dfgkox Acwjdl

Leto izdelave: 2018, stanje: rabljeno, Ročno nastavljanje dolžine z ročnim kolesom in digitalnim prikazom Za montažo na katerokoli enoglavno žago Elumatec (levo) Maksimalna podajalna dolžina: 3.000 mm Kdedpoyz U T Isfx Acwsl Pnevmatska zapiralna zavora

Leto izdelave: 2002, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1300030418, Naprodaj CNC obdelovalni center za aluminijaste in jeklene profile Elumatec SBZ 130. Stroj je v lasti podjetja in se nahaja v zaprtem proizvodnem obratu, zaščiten pred zunanjimi vplivi. Specifikacije in stanje: Kdsdpfx Acoyz Dvrowjl Letnik: 2002. Stanje: Trenutno ni v delovnem stanju (potreben servis pnevmatike). Zgodovina: Stroj je bil v aktivni uporabi do leta 2014, nato skladiščen v hali. Elektronika: Računalnik je popolnoma funkcionalen, stroj je mogoče zagnati za preverjanje sistema. Potrebne investicije: Zamenjava celotnih pnevmatskih cevi in pregled/servis krmilnih blokov. Prednosti: Stroj je mehansko v dobrem stanju in ni bil izpostavljen zunanjim vplivom. Idealna priložnost za podjetja z ustreznimi tehničnimi zmogljivostmi za obnovo ali modernizacijo stroja.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: Kjdpfx Aoy Ah Tkecwsdl The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 6.000 mm, premer žaginega lista: 550 mm, kot novo, prejšnje podjetje je prenehalo poslovati Kdodpfxsy Rp Tze Acwel

Leto izdelave: 2024, stanje: skoraj kot novo (rabljeno), Stroj kot nov, prejšnji lastnik je prenehal z dejavnostjo. Kdodsy Rp D Hjpfx Acwel

Leto izdelave: 2025, stanje: skoraj kot novo (rabljeno), Stroj je kot nov. Prejšnji lastnik je prenehal z dejavnostjo. Kdedpfx Ajy Rpyhecwol

Leto izdelave: 2005, stanje: rabljeno, Elumatec SBZ 122 CNC Machining Center, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, valued for its machining precision and operational consistency. Main features: - 3-axis CNC machining center - High-rigidity steel frame - Vertical spindle for complex milling, drilling, and machining operations - Worktable with pneumatic clamps for stable and precise workpiece holding - Long-travel longitudinal axis, ideal for machining long profiles - Protective enclosure with integrated chip extraction - Elumatec CNC control unit - Ideal for medium to high production volumes and repetitive operations Applications: - Milling Kdsdpeyg Ht Asfx Acwsl - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Main data: Brand: Elumatec Model: SBZ 122 Year of manufacture: 2005 Condition: Used Status: - Machine in generally good condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete worktable - Pneumatic clamping system - Control panel - Original guards and safety enclosures

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0740320248, Funkcionalnost: popolnoma funkcionalen, Kopirni rezkalni stroj WSF 074/03 za odvodnjavanje Kedpfx Aeyvigxecwodl