Zelo dobro stanje, malo rabljen

elumatec KF 178

Stanje: zelo dobro (rabljeno), Dostava v EU: 350 evrov Rjdpfx Ael Sklgjgtot

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Redpfx Agouiy Nyetjt Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, • Complies with CE standards. • Enables the machining of lock slots, hinge openings, handle holes, and water drainage channels on aluminum and PVC profiles. • Copy head operates on the vertical axis. • Triple drilling system operates on the horizontal axis. • Water drainage system can operate at an angled position. • Universal template offers the option to create custom templates as required. • Triple drilling, copy routing, or slotting system can be operated independently. Redpfx Agoramz Hotet • High-frequency motor (18,000 rpm). • Right conveyor system (1 meter).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) Rsdpfx Ajyv H Tiogtst • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Rodpfxow A Rv Ij Agtst Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 2008, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Elumatec SLK 118 3-osé CNC obdelovalno središče za profile. Obdelovalno središče za letve s 3 krmiljenimi osmi; zasnovano za obdelavo aluminijastih ter tankostenskih jeklenih profilov in ekstruzij, aluminija, PVC ter lahko legiranega jekla. Še posebej primerno za podjetja, ki obdelujejo profile Neher za zaščito pred insekti ali želijo avtomatizirati svojo proizvodnjo vrat. Obdelava od zgoraj, obračanje obdelovanca za obdelavo nasprotne strani. Tehnični podatki: Pomik osi X 2450 mm / V max. 36 m/min Pomik osi Y 350 mm / V max. 15 m/min Pomik osi Z 280 mm / V max. 15 m/min Število vrtljajev vretena 18.000 vrt/min. 6,5 KM (4,5 kW) motorizirano vreteno Sistem za minimalno mazanje Dimenzije: 3.100 x 1.850 x 2.250 mm (122" x 73" x 89"). Teža: 1.400 kg (3.087 lbs.). Oprema: PC upravljalna enota z zaslonom na dotik in Windows programsko opremo, 4 vpenjalci materiala Stroj je v izjemno dobrem stanju. Redjyr Ai Dopfx Agtst

Stanje: rabljeno, Leto izdelave: 1998, Stroj za vrtanje vratnih tečajev za obdelavo aluminijastih profilov s pnevmatskimi sponami za material ter mikro pršilnikom. Dolžina obdelave: maks. 2400 mm Redpoy Anhnefx Agtjt Širina profila krila: maks. 108 mm Širina profila okvirja: maks. 200 mm Višina profila: 45–80 mm Hitrost vretena: 1900 vrt/min Teža: cca 500 kg

Stanje: pripravljen za uporabo (rabljen), Heidenhain QSY 190F EcoDyn motor ID: 388 244-16 SN: 24918144D, strokovno v celoti obnovljen in preizkušen z 12-mesečno garancijo, 100% delujoč, dobava kot na fotografijah, rabljen, dobro ohranjen, 100% delujoč, dobava kot na fotografijah. Rjdpfx Aou Sd Axegtot