Constantin Hang Stiskalnica Za Vrtanje Papirja nakup rabljenega (85.462)

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Lodpjgl Nlmjfx Ah Usrl Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Lsdpfx Aov Rpxlsh Uorl Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Lodpfxochqxxo Ah Usrl Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% Lrjdpfx Asxfwdeh Usl - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Lrodpsfci D Aofx Ah Uel Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Lredpfx Asgfm Rysh Usl Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Ljdpfx Aot Hxudjh Ujrl Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Lrodsw Ig Suspfx Ah Ujl Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result Lredpfod N Dnhjx Ah Uol

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm - Teža: 1370 kg Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus! Lrodpfx Aowtdk Teh Usl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: Ljdpfx Aod Nnwleh Ujrl - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen *Subject to prior sale *Round silo available at additional cost Press only deliverable with an additional plant component, such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Type Classic – throughput up to 425 kg/h *material dependent Options for an extra charge – plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary airlocks - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology Your benefits: Key point: + Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals. + Suitable for 24h operation + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics Technical data – Briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your input material *based on a bulk density of 200 kg per cubic meter Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Ledpfefhql Tsx Ah Uorl Raw material requirements: - Moisture content (atro) must be min. 6% to max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient temperature at installation: minimum +8° C - Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% Ledpfx Ahs E Dque Uorl - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Briket: 150x60 mm Ljdpfowcc D Rjx Ah Ujrl Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg

Stanje: dober (rabljeno), Leto izdelave: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, ash content less than 1% ATRO Caution with: sand, stones, and minerals - Compression is performed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options available at extra cost: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology + 24h continuous operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l achievable *Details upon testing Functionality: The machine features a silo with agitator. Each of the 4 corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in two directions (either forward or backward movement of the cylinder). This results in 4 briquette outlets with 6 individual briquettes each. *Ideal for automatic feeding of boilers Format: Ø 30 mm Throughput: up to max. 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format allows firing of industrial combustion plants using screw conveyors Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality & density For automatic feeding into industrial combustion plants Small to medium quantities of wood chips originating from various processing industries (primarily wood, biomass, and more) can be optimally compacted. The small Ø 30 mm format offers an attractive alternative. Unlike conventional briquettes, these can be automatically fed into industrial combustion systems. Lodpfxefbb Aro Ah Uorl In addition to wood, a variety of other materials can also be processed without issue (various types of biomass & agricultural residues).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stroj za vrtanje podolgovatih lukenj, kot nov, komaj rabljen. Lrsdpfx Aoy Tk Ufjh Usl

Stanje: rabljeno, številka stroja/vozila: 006500, Pozicija 1: Vertikalno skladišče PRIESS-BMA DLS-CNC Lrodpowucmvsfx Ah Uol Pozicija 2: CNC vrtalni stroj PRIESS-BMA DLS-CNC Pozicija 3: CNC vrtalni in mozničevalni stroj PRIESS-BMA DLS-CNC Pozicija 4: CNC vrtalni in mozničevalni stroj PRIESS-BMA DLS-CNC Pozicija 5: Krtačni stroj PRIESS-BMA DLS-CNC Pozicija 6: Transferni sistem PRIESS-BMA DLS-CNC

Stanje: novo, Condition: New Delivery time: approx. 12 – 14 weeks from order Country of origin: Spain Price: €50,410 Leasing rate: €952.75 Drilling capacity in structural steel: 35 mm Spindle taper: MT 4 Throat: 390 mm Speeds: 94–2,225 RPM (16 steps) 50 Hz, 113 RPM Thread cutting capacity: M35 Length: 1,660 mm Width: 1,510 mm Height: 2,600 mm Weight: 910 kg Quill stroke: 180 mm Spindle to table distance: 190 – 650 mm Spindle to base distance: 1,310 mm Column diameter: 125 mm Table size: 400 x 420 mm Automatic feeds: 0.10 – 0.18 – 0.24 (3 steps) mm/min Motor speed: 750 – 1,500 RPM ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP APPLICATIONS Drilling and milling machine Automatic feed Electromagnetic precision clutch Gear drive Cross table Fixed table and adjustable drilling head Operator control console Coolant supply with electric pump Hand wheel for fine adjustment Tool clamping device Adjustable stops Protective guard OPTIONS (PRICES ON REQUEST): Digital drilling depth display Thread cutting device Powered longitudinal and/or cross feed Lrodpfx Ahsynmtxs Ujl Digital display for table axes and/or drilling head height adjustment

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1113, skupna širina: 1.170 mm, skupna višina: 1.510 mm, skupna dolžina: 1.850 mm, premer briketa: 60 mm, skupna masa: 770 kg, Never used = As-new machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price stated without cooling) - Sufficiently large feed hopper ensures extended work cycles without frequent material refilling Technical specifications: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min LCD Siemens touchscreen programmable control panel Manual or fully automatic operation – PLC control – Siemens Dual pressure gauge for improved pressure monitoring Briquetted material level sensor Oil level sensor Lrjdpjyh Nfhofx Ah Uol Preheating unit for operation in cold environments Inspection window Option for integration into existing production lines Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Lrsdpey Egkgefx Ah Uel Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, Schöberl lepilni stoj Višina vpenjanja: 1900 mm Dolžina vpenjanja: 3000 mm ali več Premičen 6 vpenjalnih elementov Lodpfxoy Sg Ekj Ah Ujrl Potreben prostor: 3000 x 1000 mm Uporabljiv z obeh strani Ogrevalno ravnilo: 3000 mm Letnik proizvodnje: 2007 Cena: 7000 EUR, nova cena: 13 000 EUR

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Vrtalni stroj z avtomatsko nastavitvijo kota Lrsdpfx Ahjy Iaize Usl

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: MG EVO, model krmilnika: 4axis autocalc, število valjev: 4, premer spodnjega valja: 240 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 180 mm, premer valja: 300 mm, dolžina valja: 4.100 mm, delovna širina: 4.000 mm, delovna višina: 800 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 4 mm, moč: 5 kW (6,80 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, model kapaciteta 4000 x 6 mm CNC EVO valjarna za pločevino Hidravlični 4-valjni stroj za upogibanje pločevine rabljeno, letnik 2017 Lrjdjy I Sp Tepfx Ah Ujl maksimalna debelina valjane pločevine 6 mm pred-ukrivljanje pločevine 4 mm minimalni premer valjanja (notranji) 300 mm maksimalna širina pločevine na valjih 4100 mm glavni valj premer 250 mm spodnji valj premer 240 mm stranski valji premer 180 mm Moč hidravlične enote 5,5 kW, napetost 400/50 – 480/60 V Vgrajena oprema kaljeni valji z visoko površinsko trdnostjo valjanje stožcev, konično upogibanje Električna krmilna konzola CNC EVO, 4 osi avtomatski programabilni cikel z možnostjo uvoza risb iz CAD postaje kompenzacija valjanja na osnovi podatkov o dejanski trdnosti materiala pločevine Hidravlični pogon centralnih valjev Paralelno delovanje 4 valjev je zagotovljeno z dolgo življenjsko dobo s torzijsko letevjo Nastavitev pred-ukrivljanja glede na realno trdnost materiala pločevine za najboljši rezultat Odprta prednja stran s preklopnim zaključkom za izmet zaprtih plaščev Sistem za ponovno valjanje varjenih plaščev za natančno kalibracijo Vgrajeni varnostni in izredni izklop Dokumentacija: navodila za uporabo, sheme, servisna in inštrukcijska literatura

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 40 t Ständerweite 695 bzw. 215 mm Hub 100 mm Tischaufspannfläche 650 x 440 mm Lsdpfetqqq Rjx Ah Ujrl Stößelfläche 580 x 285 mm Einbauhöhe 400 mm Gesamtleistungsbedarf 15 kW Maschinengewicht ca. t Abmessungen der Maschine (L x B x H): 1,63 x 1,05 x 2,61 m - mit Ziehkissen - mit SICK-Lichtschranke

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 7061032, Kromirana zračna miza Zračna miza s programom Ljdpfow U Nxkox Ah Ujrl