Bison 1000-11 nakup rabljenega (22.288)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.600 mm, skupna dolžina: 11.200 mm, skupna širina: 5.100 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, notranja višina: 4.970 mm, notranja dolžina: 11.000 mm, temperatura: 80 °C, notranja širina: 5.000 mm, potreba po zraku: 52.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), moč: 45 kW (61,18 KM), gorivo: utekočinjeni naftni plin (LPG), vhodna frekvenca: 50 Hz, poraba energije: 45 kWh, debelina izolacije: 50 mm, nazivna moč: 250 kW (339,91 KM), najv. debelina jeklene pločevine: 2 mm, Oprema: osvetlitev, * Air Treatment Unit: The air treatment unit is a circulation system that supplies the cabin with filtered fresh air and extracts used air during the painting process. It heats the air to 60°C, mixes the exhausted air with 10% fresh air via an automatic multi-damper system, and reheats the air before recirculating it into the cabin. The air is heated by a burner and a heat exchanger, both made of high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air is filtered twice (by pre-filters and ceiling filters) before entering the cabin. The polluted air is also filtered twice (inlet and exhaust filters) before leaving the exhaust unit. Air treatment units are insulated like the sidewalls to minimize heat loss and are protected against possible vibration and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the exhaust duct, contributing to the control of the cabin’s internal pressure. *OPERATING PRINCIPLES OF THE CABIN:* The processes in the cabin are controlled via a control panel, which manages the following steps: *PAINTING PROCESS:* During painting, 100% fresh air is drawn in from outside and passed through the front filters before reaching the plenum at ambient temperature. The air is then discharged via the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. Ljdpfewzl Hxsx Af Seag *FLASH-OFF PROCESS:* After painting, the cabin runs for another 15 minutes to expel residual solvents and thinners. Fresh air from outside circulates in the cabin during this phase. *DRYING PROCESS* In this phase, 80% of the air flowing through the cabin is heated to 60°C and delivered into the cabin via a plenum. Since 20% of the solvent is released during drying, the solvent is expelled with this air. Industrial paints are typically dried at 60°C; however, the cabin temperature can be adjusted via the control panel as needed. *COOLING PROCESS:* After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates into the cabin, and afterwards, the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and devices integrated into the cabin. The control panel is made of durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Switch Panels: • The control panel contains essential components such as contact breakers, fuses, indicator lights, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • The electrical wiring is designed to allow cabin relocation, if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, nosilec vretena: MK 4, skupna masa: 2.500 kg, zmogljivost vrtanja: 40 mm, največja hitrost vretena: 1.655 obr/min, Radial Drilling Machine OOYA RE 1000 in excellent condition for sale Manufacturer: OOYA Machinery Works Co. Ltd Model: RE-1000A Speed range: 50% (12 steps), 32–1655 rpm (50 Hz) Arm reach: 1000 mm Spindle taper: MT 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Vertical arm travel: 650 mm Spindle diameter: 60 mm Column diameter: 320 mm Clamping table: 1020 x 650 mm Clamping block: approx. 450 x 650 x 500 mm Spindle diameter: 60 mm Column diameter: 320 mm Power supply: 3 x 200 V 50 Hz (Japanese voltage standard) Main drive motor: 2.2 kW Arm lift motor: 1 kW Coolant pump motor: 50 Watts Weight: 2.5 t Required floor space: approx. 2.1 x 1.16 x 3 m Would you like more information? We are happy to assist you! Please contact us via the contact form or give us a call. Ledpswvufgsfx Af Sjag Your listing was automatically translated. Translation errors may be possible.

Stanje: pripravljen za uporabo (rabljen), CAP30, naprava za nanašanje, model 1000, HELICAP23 PRO: Letnik izdelave 2013 Ljdpew Nqn Nefx Af Sjag VERZIJA 300v 15.000 ur delovanja CENA: 140.000 EUR, pogoj FCA POLJSKA ODLIČNO STANJE, PRIPRAVLJENA ZA ODPOŠILJANJE.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Hib Akzent 1000 model T1060-8 krmiljenje varilnih klešč Zelo dobro ohranjeno, popolnoma delujoče. Lsdsxmuzmjpfx Af Ssag Lokacija artikla: 75053 Gondelsheim Glej slike Dostava preko špediterja ali osebni prevzem

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Poids total env. 300 kg, alimentation 400V 50Hz. Très bon état, voir photos. Ljdpfxey D D S Se Af Soag Localisation de l’article : 75053 Gondelsheim Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, stiskalna sila: 10 t, hod: 200 mm, obratovalna hitrost: 260 mm/s, širina mize: 430 mm, dolžina mize: 440 mm, kapaciteta rezervoarja za olje: 46 l, skupna masa: 800 kg, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Manufacturer: JAM Model: HYP-1000 Year of manufacture: 2003 Capacity: 98 kN (10 t) Stroke: 200 mm Open height: 395 mm Throat depth: 440 × 430 mm Ram hole: φ32 × 60L mm Laodpevbfkrefx Af Seg Ram approach speed: 260 mm/s Ram pressing speed: 19 mm/s Ram return speed: 219 mm/s Equipped with a light safety device Voltage: 3-phase 200 V, 1.5 kW Press body weight: 800 kg Hydraulic oil capacity: 43 liters Height (mm): 1395 Width (mm): 700 Depth (mm): 1170

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Celovita linija Tetra Pak TBA 21-1000 Slim, vključuje: 1. Polnilka TBA/21 1000 Slim, V050, letnik 2003, 52.000 delovnih ur 2. Aplikator zamaškov CAP30 za Helicap23 Pro26 3. Akumulator škatel Easy Ride Terplus 4. Ovijalka wrap around TCBP70 5. Transportni trakovi 6. Transportni sistemi Lajdpfx Aeycwvasf Seg Linija je v zelo dobrem stanju, še vedno v proizvodnji do aprila. Možno prodati tudi brez aplikatorja CAP30.

Leto izdelave: 1976, stanje: rabljeno, številka stroja/vozila: TH20010161, Demag overhead crane – bridge crane, crane runway, hall crane Load capacity / lifting capacity max. 10t - 10,000kg, span 11,750mm External dimension with end carriage approx. 12,000mm With steel hoist and floor-mounted pendant control Overall height (top of crane to hook) approx. 900mm End carriage length with buffer approx. 3,500mm Lifting height (wire rope hoist) 10,000mm Crane weight approx. 4,000kg Includes 2 x 25m running rails HEB280, includes conductor rails!!! Beam lengths per side: 1 x approx. 10m 1 x approx. 15m Support spacing 10m / (10+5)m Crane is dismantled, immediately available ex works 75053 Gondelsheim Used condition ----- Ledpov A Sa Nofx Af Soag Column-mounted jib cranes and wall-mounted jib cranes also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible – Please inquire with your ZIP code Collection preferred

Stanje: dober (rabljeno), Weiss Model: WK1-1000/70 Weiss Climate Test Chamber, Water-cooled (Refrigerant converted to R-452A) Control Unit: Touch Panel All control and operation commands can be initiated at the touch panel by simply touching the function symbols. Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. Measurement cables and test devices can be routed into the test chamber through these openings. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Internal Dimensions: Chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Specifications for Temperature Tests: Minimum temperature: –70 °C Maximum temperature: +180 °C Temperature deviation (over time): ±0.1 to ±0.5 K Temperature uniformity (spatial): ±0.5 to ±2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Specifications for Climate Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation (over time): ±0.1 to ±0.3 K Temperature uniformity (spatial): ±0.5 to ±1 K Humidity deviation (over time): ±1 to ±3% RH Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Lasdpezgbtpofx Af Sog Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change; errors and omissions excepted!) We are happy to answer further questions by phone.

Stanje: dober (rabljeno), Heiber Schröder CE 1000-2 – stroj za oblikovanje pladnjev Stroj z dvema linijama, proizvedenega pri Heiber & Schröder, Nemčija. Proizveden leta 2011. Opis: Stroj lahko proizvaja embalažo, kot so pladnji, pladnji z pokrovi, pladnji, ki ne prepuščajo (zatesnjeni – obloženi s PE folijo na notranji strani), pladnji v obliki školjke (za hamburgerje), pomfrit, azijska hrana (stožčasta oblika) in še več. Lajdpjzz Hgkefx Af Sjg Vključuje dokumentacijo, orodja, dodatno opremo in sistem za nanašanje toplega in hladnega lepila Nordson.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 6.100 mm, skupna širina: 1.200 mm, leto zadnje generalne obnove: 2025, trajanje garancije: 12 meseci, vhodna frekvenca: 50 Hz, Peč z 2 UV-lučmi. Lasdpfjz Dgtgox Af Sjg Nastavljiva hitrost traku. Nastavljiva moč luči. Skupna dolžina traku: 12,50 metra. Uporabna dolžina traku: 6,05 metra. Širina traku: 1 meter.

Stanje: zelo dobro (rabljeno), Liebisch Model: S 1000 A-TR / 42016211 Chest-type salt spray test chamber with 1000-liter test chamber volume for salt fog tests. Constamatic® TR This series features automatically controlled chest devices of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions (W x D x H): 2600 x 1120 x 1210 mm Test chamber internal dimensions (W x D x H): 1535/1425 x 800/780 x 660/650 mm Max. load per sample rack: 10 kg per tier Operating voltage: 230 V +6/-10% Connected load: 2700 W Humidification control range: up to 70°C Test chamber (K) control range: up to 50°C Test chamber (S) control range: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution tank: approx. 150 liters Test solution consumption per hour: approx. 0.7 – 1.0 liters Bottom tray water fill: 15 liters Weight: 450 kg Condition: used Ljdpfszh Ht Rox Af Ssag Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, stiskalna sila: 1 t, širina mize: 200 mm, dolžina mize: 230 mm, skupna širina: 400 mm, skupna višina: 860 mm, skupna masa: 105 kg, zračni tlak: 6 letvica, FCP-C 10 kN Pneumatic Press, Single Unit for Sale Manufacturer: FCP-C Pressing Force: 1 t Stroke: 75–100 mm Air Pressure: 0.2–0.5 MPa Working Height: 320 mm Two-Handed Operation Table Size: 200 x 230 mm Shaft Diameter: φ15H9 mm x Depth: 35 mm Speed Controller Easy-Rolling Wheel Rotary Stop Lever Height: 880 mm Length: 360 mm Width: 400 mm Weight: 105 kg Ledjv E Sazepfx Af Sjag

Stanje: zelo dobro (rabljeno), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser chiller Test chamber volume: approx. 990 litres Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the centre of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Heat compensation: max. 2750 W Feedthroughs included as standard: R1: NW 125 mm Lsdpfozfy Rwjx Af Soag L1: NW 50 mm Dimensions: Test chamber dimensions: width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load (evenly distributed over the floor area of the test chamber): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen lamp 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat emission for water-cooled test chambers: max. heat emission to ambient: 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your safety as a buyer, please note the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is subject to confirmation!) For any further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 800 kg, Leto izdelave: 1995, stiskalna sila: 10 t, obratovalna hitrost: 260 mm/s, hod: 200 mm, dolžina mize: 440 mm, širina mize: 430 mm, vrsta vhodnega toka: Klimatska naprava, Oprema: varnostna svetlobna zapora, For sale is a 10-ton hydraulic press by J.A.M (Japan) in excellent condition. Manufacturer: JAM Model: HYP-1000 Year of manufacture: 1995 Capacity: 98 kN (10 t) Stroke length: 200 mm Open height: 395 mm Table size: 440 × 430 mm Punching hole: φ32 × 60L mm Approach speed of ram: 260 mm/s Lodpewcqc Uofx Af Ssag Pressing speed: 19 mm/s Ram return speed: 219 mm/s Equipped with modern safety features Two-hand operation Voltage: 3-phase, 200 V, 1.5 kW Press body weight: 800 kg Hydraulic oil: 43 liters Height: 1395 mm Width: 700 mm Depth: 1170 mm

Stanje: novo, Siemens 1PH7133-2NF02-0CB0 asinhronski motor SN YFW812553110002 + ventilator W2D210-EA10-11, neuporabljen, v odprti originalni embalaži, 100% delujoč, dobava po fotografijah. POZOR: Stroške pakiranja in dostave prosim poizvedujte posebej! Lajdex Dvzvspfx Af Sog

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 5.218 h, nosilnost: 3.000 kg, dvižna višina: 5.600 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.930 mm, dolžina vilic: 1.350 mm, vrsta pogona: Elektro, Four-way side loader Mast type: Triplex Condition: Operational and fully functional Technical condition: Good Ljdpfxswcubnj Af Ssag Reach fork, fork positioner,

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Feedthrough included as standard R1: NW 125 mm L1: NW 50 mm Laodpfezfzamex Af Seg Dimensions: Internal chamber dimensions (W x D x H): 1100 mm x 950 mm x 950 mm External dimensions (W x D x H): 1390 mm x 1525 mm x 1995 mm Maximum distributed load (test chamber floor): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission (for water-cooled cabinets): max. heat output to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 Important Safety Information for Buyers: The following procedures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) If you have further questions, we are happy to provide information by phone.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN: B397497, Oprema: Na voljo je tipska ploščica, Three-phase hermetically sealed oil transformer Type: 1000 kVA 20/0.4 kV Dy11 with significantly reduced losses according to Directive 2009/125/EC EU Regulation No. 548/2014 Rated power: 1000 kVA High voltage: 20 kV Low voltage: 400 V Laedpfxswxm E Do Af Ssg Tap changer: +/- 2 x 2.5% Frequency: 50 Hz Vector group: Dy11 HV connections: Outer cone as per DIN 47 636-2, 250 A LV connections: As per DIN EN 50386 with connection flags Equipment: Thermometer

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, The conveyor belt is for sale and has the following dimensions: Length: 1300 mm Nominal width: 290 mm Overall width: 394 mm Conveyor belt in blue RAL 5002, temperature resistant up to 100°C Lasdpfx Afowtflfj Seg Deflector plate: 60 mm high Motor protection switch next to the motor With support frame, height adjustable in 30 mm increments, max. 900 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, skupna dolžina: 2.868 mm, skupna višina: 2.102 mm, skupna širina: 1.960 mm, skupna masa: 2.200 kg, Pozdravljeni, zaradi stečaja prodajamo več 3D-tiskalnikov. Vsi so profesionalna oprema, namenjena avtomobilski industriji, razvoju in oblikovanju. V tej ponudbi je Stratasys Objet 1000 / J4100 iz leta 2013. Tiskalnik je bil leta 2025 mehansko obnovljen in posodobljen na najnovejše stanje, tako elektronsko kot na programski strani, s strani podjetja Stratasys. Ta nadgradnja je stala približno 135.000 EUR. Dodatna oprema, kot je zamenljiva tiskalna plošča s premičnim nosilcem in različni rezervni deli, je vključena. Porabni material lahko dodatno kupite po ugodni ceni. Gre za tiskalnik za stereolitografijo, kar pomeni, da se s pomočjo UV-žarkov/laserja strdi tekoča smola, s čimer se plast za plastjo ustvari izdelek izjemno natančno, natančno in z odlično kakovostjo površine. Torej gre za izjemno profesionalno opremo, ki lahko na primer večbarvno tiska avtomobilske luči iz prozornega stekla. Novi tiskalnik te velikosti prostora za tiskanje bi danes stal precej več kot 350.000 EUR (neto). Tehnični podatki: Prostor za tiskanje/maksimalna velikost izdelka: 1.000 × 800 × 500 mm Debelina plasti do 27 mikronov Visoka hitrost: do 3 osnovnih smol, ločljivost 27 µm Izjemno visoka hitrost: 1 osnovna smola, ločljivost 55 µm PolyJet UV tehnologija 110–240 V Dimenzije: 2.870 x 1.960 x 2.105 mm Teža: 2.200 kg Cena je za dostavo na našem naslovu, možnost natovarjanja. Ponujamo tudi svetovno dostavo in ustrezne carinske dokumente, ob dodatnem plačilu. Opremo lahko ogledate pri nas v skladišču. Cena vključuje DDV, račun z ločenim DDV. !! Prodaja samo poslovnim subjektom, brez garancije in brez kakršnega koli jamstva, brez možnosti vračila, kupec prevzame opremo v stanju, v katerem se nahaja. Dodatni opis proizvajalca: Ustvarjajte velike ali majhne proizvodne orodja in prototipe v originalni velikosti. Povečajte svojo produktivnost in hitro dosezite donosnost naložbe s 3D-tiskalnikom Stratasys J4100™. Zaradi njegove sposobnosti uporabe več materialov, visoke zmogljivosti in ekstra velike tiskalne platforme omogoča hitrejše, pametnejše in natančnejše delovne procese. Zahvaljujoč tehnologiji PolyJet™ to zmogljivo sistema omogoča inženirjem, proizvajalcem in oblikovalcem, da v 3D natisnejo vsak dizajn – ne glede na to, kako zapleten ali podroben je. Velikost delov ni pomembna: J4100 natisne enako natančno velike in majhne prototipe. Natisnite velike dele v enem postopku, dolžine več kot en meter. Tako se izognete razdelitvi velikih CAD-datotek in poznejšemu sestavljanju delov. Natisnite več delov v enem postopku in izkoristite konkurenčne stroške. Zanesljiv in uporabniku prijazen J4100 vam omogoča izdelavo delov, ki so pripravljeni za uporabo takoj, z minimalno ali celo brez potrebe po postopkih dokončanja. Podporni material lahko hitro odstranite z vodnim curkom, za večino aplikacij pa gladki deli, izdelani iz več materialov, ne potrebujejo poliranja ali lakiranja. Ledpfx Ajz Ahq Tef Soag

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 59.153 km, moč: 450 kW (611,83 KM), prva registracija: 11/2016, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: retarder, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.500 mm, Leto izdelave: 2016, obratovalne ure: 5.394 h, Oprema: AdBlue, centralno zaklepanje, električno upravljanje oken, klimatska naprava, retarder, servovolan, spojka prikolice, zapora diferenciala, - Ojačevalnik zavornih sil - Blokada diferenciala - Daljinski žarometi - Nizka raven hrupa - Omejevalnik hitrosti - Intarder (dodatni zavorni sistem) - Zračna vzmet - Zračno vzmeteni sedeži - Zračni rog - Vrteča se opozorilna luč - Zaščitna zavesa pred soncem - Orodjarna - Ose za priključitev priključne gredi (PTO) - Priključna prikolica Konfiguracija osi Sprednja os 1: Krmilna Sprednja os 2: Krmilna Teže Lastna teža: 29.075 kg Nosilnost: 7.925 kg Dovoljena skupna masa: 37.000 kg Funkcionalno Mast: Teleskopski (14 členov) Nosilnost: 30.000 kg Proizvajalec nadgradnje: PALFINGER PK110002-SH G +PJ 170 E PLUS CE oznaka: da Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro # PONUDBA # SCANIA G450 8x4 tovornjak s platformo in PALFINGER PK 110.002-SH G POWERLINK PLUS + PJ 170 E DPS PLUS JIB + HIDRAVLIČNI VITEL ## Scania G450 8x4 tovornjak s platformo z zmogljivim tovornim žerjavom Z veseljem vam ponujamo ta izjemno opremljen tovornjak Scania G450 8x4 s platformo. Vozilo je opremljeno z zmogljivim tovornim žerjavom Palfinger PK 110.002-SH G PowerLink Plus, PJ 170 E DPS Plus JIB in hidravličnim vitlom. Ta kombinacija je idealna za zahtevna dvigala in montažna dela v gradbeništvu, strojništvu, specialnem transportu, energetski industriji ter pri transportu jekla in montažnih elementov. Tovornjak je iz Nemčije, v zelo dobrem originalnem stanju in takoj pripravljen za uporabo. --- # Podatki o vozilu Proizvajalec: Scania Model: G450 Izvedba: 8x4 tovornjak s platformo Moč motorja: 450 KM Prenos: Scania Opticruise – samodejni menjalnik Laodjzxgmlepfx Af Sjg Prevožena razdalja: 59.152 km Poreklo: Nemško vozilo Stanje: Zelo dobro ohranjeno, originalno stanje Platišča: Originalna platišča Alcoa iz aluminija --- # PALFINGER tovorni žerjav ## Tip Palfinger PK 110.002-SH G PowerLink Plus Opremljen z: * PJ 170 E DPS Plus JIB * Hidravlični vitel * Daljinski upravljalnik * Dodatni hladilnik za hidravlično olje žerjava * 14-krat hidravlično iztegljiv * Sistem PowerLink Plus * DPS Plus JIB * Proporcionalni hidravlični sistem * Sodobni varnostni in stabilizacijski sistemi --- # Tehnični podatki Maksimalna nosilnost: 30.000 kg Maksimalna višina dosega: cca 36 metrov Delovne ure žerjava: 5.394 ur PK 110.002-SH spada med najzmogljivejše tovorne žerjave v svojem razredu in navdušuje z izjemno nosilnostjo, velikim dosegom in največjo natančnostjo tudi pri zahtevnih dvigih. --- # Platforma Scania ima robustno, odprto tovorno površino. ### Dimenzije * Dolžina: 500 cm * Širina: 250 cm Oprema: * Alumijaste stranske stene * Robustna jeklena podlaga * Idealno za transport strojev, gradbenih materialov in specialnih tovorov --- # Podvozje Oprema: * Prijeklica * Originalna platišča Alcoa iz aluminija * Dodatni hladilnik za hidravlično olje * Samodejni menjalnik * Robustno in stabilno podvozje 8x4 --- # Teže Tehnično dovoljena skupna masa: 37.000 kg ...

Stanje: novo, Leto izdelave: 2026, Formatna krožna žaga ALTENDORF F 35 Tip 1 - 1000 Top za masivni les - Nova naprava - takoj dobavljiva iz skladišča Bitburg - Moč motorja 7,5 kW, 400 V, 50 Hz, 3 hitrosti Motorizirano dviganje in nagibanje Velik zaščitni pokrov Dvojni voziček 3.200 mm Priprava za predrezovalec Vzporedno vodilo, širina reza 1.000 mm Kotno-poševni prislon 3.450 mm, brez dolžinskega izravnanja Podaljšanje/razširitev mizne plošče: površina s prašnim premazom Območje nagiba žaginega lista: 0 - 46 ° Dolžina vozička: 3.200 mm Dolžina reza: 3.100 mm Širina reza: 1.000 mm Višina reza: 154 mm max. Ø žaginega lista: 450 mm Velikost zaslona: 15 palcev, Višina delovne mize: 910 mm, Priključek sesalnika Ø: 80 + 120 mm Vključene možnosti: M45102 Vzporedno vodilo 1000 mm Digit_X Ledpfxsxyl Epj Af Soag Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: rabljeno, Tračna žaga iz litega železa znamke Primultini s premerom vztrajnika 100 cm, z nagibno mizo, maksimalen uporabni prehod desk 90 cm. Moč motorja 10 KM. Rabljena. Lasdpfx Aozz Rmuof Ssg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Prodaja se delujoč in zelo dobro ohranjen oljni gorilnik znamke Weishaupt WM-GL10 — uporabljen je bil samo na olje, zato brez plinske armature. 1. Tip gorilnika: WM-L10/3-A Moč: 110 - 1000 kW 15 - 84 kg/h Izvedba: ZM-T Leto izdelave: 2007 2. Prodaja se delujoč in zelo dobro ohranjen oljni gorilnik znamke Weishaupt RL3-A. Tip gorilnika: RL3-A Moč: 120 - 775 kW 10 - 65 kg/h Izvedba: ZMD Lasdpfx Aey Uvhtsf Sjg Leto izdelave: 2002