Amtec Mhw 14Hd 25-Hs nakup rabljenega (18.715)

Stanje: novo, Leto izdelave: 2025, Weighing unit with 24 (2x12) weighing heads, each with a 1.0-liter capacity, for extremely precise weighing. Specially designed for mixing two different products or for high-speed weighing of a single product. - Specifications: max. machine cycle rate (idle, depending on product): 150 (or 2x60) cycles/minute; weight range: 10-1000g; accuracy: +/-0.1-2.0g; touchscreen operation (large version); stainless steel; power: 220V/3.0kW; machine dimensions and weight: L2176xW1456xH1483 mm, 1000/1100kg. Hnodpsv Nmtdofx Ahusl The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Simply inquire and let us know your packaging requirements. – We normally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 24 weighing heads, each with a volume of 0.8 liters, for extremely precise weighing. Special design for mixing four different products or for high-speed weighing of a single product. - Specifications: max. machine cycle rate (no load): 220 cycles/minute (when processing one product); weight range: 2-500g; accuracy: +/-1g; 10.4 inch touchscreen (menu in three languages); stainless steel; IP64 (option to upgrade to IP65 for an additional charge); 220V/4kW; dimensions and weight: L2136xW1456xH1433mm, 1100kg. Deviations from the sample photo are possible. Hnsdpfsv Nmtkjx Ahujl The machine/system is also available in further versions for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Please feel free to contact us and let us know your packaging task. We usually have 30-50 different new machines available for immediate delivery from stock. For customer-specific machines, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 24 weighing heads, each with a 1-liter volume, for extremely precise weighing. Specially designed for weighing 4 or 6 different products simultaneously and subsequently combining them, or for high-speed weighing of a single product. Optionally available at extra cost: CAN-bus protocol for higher speed. Specifications: Maximum machine cycle rate in idle: 50 cycles/minute (when weighing 4–6 products simultaneously); weight range per product (with 6 products): 1–200g; accuracy: +/- 0.5–1.5g; PLC-controlled, 10" touch-screen operation (menu in German, English); stainless steel 304; IP65; 220V/4kW; dimensions: L2630xW1700xH1815mm; weight: 1200kg. The machine/system is also available in alternative versions for different packaging sizes and packaging speeds. Hodpfxsv Nmtwe Ahujnl Please note that our new prices are often below typical prices for used machines. Feel free to contact us with your packaging requirements. - We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 2 heads. - Specifications: Max. weight 2500g/2500ml (depending on product); Accuracy: 2-5g; 220V/1kW; max. machine cycle rate (idle): 25 cycles/minute. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Hodpsv Nmvrsfx Ahuonl Please note that our new prices are frequently below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. For customer-specific machines, we also offer very short delivery times starting from approx. 3 weeks. - All machines are sold with a full warranty.

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine for shaping and filling small plastic bottles with liquids, creams, or viscous products. Designed for use in the pharmaceutical, food, or chemical industries. Thanks to easily interchangeable, modular molds, bottles of various sizes and shapes can be produced. Suitable for manufacturing multipacks, with the number of packs freely adjustable. Dosing and filling of product takes place via a peristaltic pump, notable for its easy operation, cleaning, and adjustment. – Specifications: Packaging materials: PVC/PE composite film, PET/PVDC as an eco-friendly composite, PVC/EVOH ultra-high barrier composite film (e.g. for pesticide packaging); Packaging thickness: 0.25-0.35mm; Max. outer roll diameter: 400mm with standard core (70-76mm); Max. draw depth per side: 12.5mm; Max. forming area: 120mm x 210mm; Bottle height: 58~108mm; Filling range: 1~50ml/bottle; Max. machine cycle speed in idle: 25 cycles/minute; Power supply: 380V, 50Hz; Power: 17.5kW; Compressed air & consumption: 6bar, 0.4m³/min; Cooling water: temperature 14~18°C, pressure 1.5~2bar, closed loop 6L/min; Machine dimensions: L7200 x W960 x H1800mm; Weight: 2,200kg. Hsdpfx Ahsv Nk Aijujnl Please note that our new machine prices are frequently below typical used equipment prices. Feel free to enquire and tell us about your packaging application. – We usually have 30-50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are sold with full warranty.

Stanje: novo, Leto izdelave: 2025, High-speed SLEEVER machine for up to 35 multipacks per minute, also suitable for printed film. Suitable for round and square containers (bottles, cans, jars). Special film feeding from a single roll. Continuous and smooth film transport. Complete system including shrink tunnel. The alignment of the products is corrected during forward transport. Hnodpfxjv Nl Nwe Ahusl – Specifications: Packaging configurations: 2x3, 3x4, 3x5, 4x5, 4x6 (depending on product / max. multipack size approx. L500xW600xH350 mm); max. machine cycle rate (idle): 35 cycles/minute; servo motor control system and 10'' LCD color touchscreen; film thickness: 60-120 µm; suitable film type: PE film; max. film width: 600 mm; max. film roll diameter: 450 mm; shrink tunnel chamber size: L3000xW700xH450 mm; shrink temperature: 200-280°C; power supply: 380V, 65 kW; compressed air: 1 m³ / 6 bar; overall dimensions: L15000xW1530xH2500 mm (incl. conveyor belts); weight: 4500 kg. Please note that our new machine prices are often below typical used prices. Please feel free to contact us and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock at any time. For customer-specific machines, we also offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, High-speed sleeve shrink machine for multipack packaging of bottles, cans, etc. without carton tray/cardboard base, including shrink tunnel. Suitable for container arrangements of 2x3, 3x4, 4x6, or other configurations. Designed for PE shrink film with a thickness of 60-100μm, transverse film shrinkage of 30-40%, and longitudinal film shrinkage of 60-70%. - Specifications: SIEMENS PLC control and touchscreen, SCHNEIDER AC circuit breakers, FESTO cylinders, and SIEMENS servomotors for film feed and cutting. Bottle size (cans or containers): 0.25 to 1.5 liters, diameter: 50-120mm, height: 120-300mm; maximum complete multipack dimensions: L(150-720)xW(110-450)xH(120-300)mm; maximum machine cycle rate (idle): 50 cycles/minute; machine dimensions: L8345xW1460xH2400mm; weight: 5,000kg; power supply: 380V, 6kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 60 liters/min, 6 bar. Please note that our new prices are often below usual used equipment prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from around 3 weeks. – All machines are offered with a full warranty. Hnjdpfx Aev Nl Rzshujl

Stanje: novo, Leto izdelave: 2025, The SHRINK tunnel can be combined with the AMTEC Shrink Wrapper SPEEDshrink 35XL. High-speed shrink performance with 0–20 m/min for polyolefin film (POF film). – Specifications: Max. packaging dimensions: W700 x H250 mm; tunnel size: L1500 x W800 x H300 mm; max. 20 kW, 380 V; machine dimensions: L1800 x W1290 x H1300 mm; weight: 750 kg. Please note that our new machine prices are often below standard used equipment prices. Feel free to send us an enquiry and let us know your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty. Hsdsv Nl T Aepfx Ahuenl

Stanje: novo, Leto izdelave: 2025, PRO version of the shrink tunnel for high-speed processing of products in POF film. Can be combined with the AMTEC Shrinker SPEEDshrink W40M (vertical) PRO version and the AMTEC Shrinker FLOWshrink W100-L high-speed PRO version. Features double air circulation, adjustable airflow, suitable for large products and/or high-speed packaging (recommended for SIDEshrink and FLOWshrink machines). – Specifications: Max. product dimensions: L(unlimited)xW300xH230; Tunnel size: L1200xW350xH380; Machine dimensions: L2200xW900xH1160mm; Power consumption: 380V, 14kW. Please note that our new equipment prices are often below typical used equipment prices. Feel free to contact us and describe your packaging requirements. – Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines are supplied with a full warranty. Hsdpfev Nl Utjx Ahuonl

Stanje: novo, Leto izdelave: 2025, Full version of the vertical packaging system with a 10-head multihead weigher (2.5 L/head), Z-type incline conveyor, platform, outfeed conveyor belt, and rotary collection table for finished, packaged products. Suitable for packaging irregularly shaped bulk goods such as potato chips, cornflakes, biscuits, nuts, candy, shrimp, and industrial components/products like screws, nails, and metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servomotor for film transport, dual film transport possible, air extraction/evacuation device (removes residual air from the pouch before sealing – does not create a vacuum), support device for heavy filled bags, Euro slot punch device, suitable for OPP and PE film (PE unit may be subject to additional charge). Specifications of the VFFS packaging machine: - Filling volume: up to 5000 ml - Film width: max. 620 mm - Bag size min–max: L(100–400)xW(180–300)mm - Max. cycles (no load): 45 cycles/min - Material: Stainless steel 304 - Power supply: 220V, 5 kW - Air supply: 6 bar, 0.3 m³/min - Dimensions (LxWxH): approx. 1780x1850x1950 mm - Weight: 700 kg The weighing unit, with its 10 weighing heads (2.5 L/head), ensures high weighing accuracy. It is also equipped with a PLC, touchscreen control (available in multiple languages), up to 99 programs can be preset/stored, and the servomotor (hopper) can be adjusted for different product types. Specifications: - Hopper capacity: 2.5 L - Weighing range: 10~3000 g - Accuracy: ±0.1~2 g (product-dependent) - Max. cycles (no load): 60 cycles/min - Material: Stainless steel 304 Hnsdpov Nmi Ejfx Ahuol - Power supply: 220V, 1.5 kW - Dimensions (LxWxH): approx. 1600x1136x1484 mm - Weight: 500 kg Z-type incline conveyor (for transporting product to the weighing unit): Dimensions can be customized to customer requirements (standard height 3.6 m); conveying capacity: 3–6 m³/h; power supply: 380V, 0.75 kW; gross weight: 500 kg. The outfeed conveyor belt features a stainless steel frame. Specifications: - Conveyor speed: 30 m/min - Power supply: 220V, 0.55 kW - Dimensions (LxWxH): approx. 1850x550x1230 mm - Weight: 80 kg Rotary collection table for accumulating finished bags from the outfeed conveyor; speed adjustable; table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Stainless steel platform required for access to the weighing unit and upper part of the packaging machine. Dimensions (LxWxH): approx. 2x2x2 m. Complete system dimensions: approx. L3200xW3200xH3600 mm; dependent on final configuration. The system must be adapted to customer-/product-specific requirements, so variations in the individual modules’ and machines’ specifications are possible. Key components: Color touchscreen panel SIEMENS, PLC controller SIEMENS, servomotor SIEMENS, AIRTAC cylinders, AIRTAC solenoid valves, OMRON relays, SIEMENS servomotor for film transport. The machine/system is also available in other versions for different packaging sizes and speeds.

Stanje: novo, Leto izdelave: 2025, Weighing unit with 12 weighing heads (containers), each with a capacity of 1.0 litres, designed for highly precise weighing. - Specifications: Accuracy: +/- 0.5-1.5g; max. machine cycle speed (idle): 120 cycles/minute; product-contact parts: stainless steel; housing components: painted steel; 220V/2.0kW; dimensions and weight: L1020xW1076xH1293mm, 300/350kg. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Hnedpsv Nmnzefx Ahuel Please note that our new prices are often lower than the usual prices for used equipment. Feel free to send us an enquiry and inform us about your packaging application. - We generally have 30-50 different new machines available for immediate delivery from stock. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty.

Leto izdelave: 2025, stanje: novo, Automatic packaging machine for filling and packaging tea into single-chamber tea bags, with subsequent packaging of multiple tea bags (up to 5 per pouch) into tubular bags. Includes volumetric doser and labeling system for attaching string with label. Labeling occurs on both ends (label-string and string-bag) via heat sealing. - Specifications: • Max. machine cycle rate (idle): 115 cycles per minute • Dosing volume: max. 6 cm³ • Tea bag dimensions (LxW): 62.5 x 50 mm • Roll width tea bag material: 125 mm • Suitable tea bag material: 16.5–21 g/m², heat-sealable on one side • Tubular bag dimensions (LxW): 100 x 130 mm, with adjustable length • Tubular bag material: heat-sealable monofilms or laminated composite film Hjdjv Nm Saepfx Ahuonl • Label size (LxW): 26/28 x 24 mm • String length: 210 mm • Power supply: 220/380V • Power consumption: 2 kW • Required compressed air: 0.4–0.6 MPa • Air consumption: 65 l/min • Machine dimensions (LxWxH): 1400 x 905 x 2475 mm • Weight: 910 kg.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Hsdpfoyb Sywox Ahusnl Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hnjdpsyb Sy Rjfx Ahuel Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Hnedpfxeyb Syks Ahuol Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 1.000 mm, skupna višina: 950 mm, skupna masa: 195 kg, vhodna napetost: 220 V, moč pogonskega motorja podajalnika: 1.100 W, sekundarna napetost: 380 V, število valjev: 7, Oprema: CE označba, dokumentacija / priročnik, nujno zaustavitev, Wir fertigen die "R-PRO 25" Doppelstehfalz-Profiliermaschine mit höchster Präzision auf modernsten CNC-Bearbeitungszentren. Mit der benutzerfreundlichen, leistungsstarken, langlebigen und robusten "R-PRO 25" Doppelstehfalz-Profiliermaschine können Sie Ihre Stehfalzarbeiten qualitätsorientiert ausführen. Als REIS STANDING SEAM TECHNOLOGIES unterstützen wir unsere Kunden jederzeit mit vorrätigen Ersatzteilen – von der Produktion bis zur Montage, vom Verkauf bis zum technischen Service. MAXIMALE MOBILITÄT ZU GERINGEN KOSTEN Große, schwer zu transportierende und kostspielige Stehfalz-Profiliermaschinen sind dank der "R-PRO 25" nicht mehr erforderlich. Mit unserer tragbaren Stehfalzmaschine ist eine hochpräzise Herstellung von Stehfalzpaneelen ohne Längenbegrenzung möglich. QUALITÄT UND VERTRAUEN – REIS STANDING SEAM TECHNOLOGIES Jede produzierte "R-PRO 25" Stehfalzmaschine wird sorgfältigen Tests unterzogen. Einfache Wartung CE-Zertifikat EG-Konformitätsbescheinigung ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 Hsdpohpuhtefx Ahusnl DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 Jahre Garantie Starkes Management. Loyaler, hochqualifizierter Mitarbeiterstamm. "R-PRO 25" Standardausstattung: - Standardfalz-Höhe: 25 mm - Gewicht: 195 kg - Transport mit Kleinwagen möglich - Einfach auf das Dach zu heben - Für den einfachen Transport in vier Teile zerlegbar (Standard) - Kabelfernbedienung (Standard) - Not-Aus-Taste (Standard) - Vorwärts- und Rückwärtsfunktion (Standard) - Materialbreitenverstellung (250 mm – 700 mm) (Standard) - Rollen mit Feststellfunktion (Standard) "R-PRO" Sonderausstattungen: - Sickenprägewerkzeuge (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Digitaler Wegmessgeber (Optional) (R-Pro 25 Plus – R-Pro DUO – R-Pro MAX) - Kreissäge (Optional) (R-Pro 25 Plus) - Manuelle Tafelschere (Optional) (R-Pro MAX) - Gleitende Schere (Optional) (R-Pro DUO) Für weitere Informationen und Preise kontaktieren Sie uns bitte...

Leto izdelave: 2025, stanje: novo, Linear weigher with a weighing range from 100g to 10,000g. Suitable for weighing/dosing granulated and piece-type products. Two weighing heads with load cells and two vibrating feeder trays enable fast and precise weighing. - Specifications: Weighing hopper volume: 20 L; Number of weighing heads: 2; Weighing range: 100–10,000g; Accuracy: +/- 1–25g; Maximum machine cycle rate (idle): 20 cycles/minute; Power supply: 220V, single-phase; Stainless steel version SUS 304. Hodpfx Ahjv Nmwisuonl This machine/system is also available in further models for various packaging sizes and packaging speeds. Please note that our new prices frequently undercut typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times from around 3 weeks. – All machines are offered with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system for medium-sized packs and pouches. Suitable for the detection of foreign objects such as metal, glass, stone, plastic, etc., in food or non-food products. Specifications: Conveyor belt width: 410 mm; Detection sensitivity: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic (e.g. stone, glass) from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; Detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; Conveyor belt height: 850 ± 30 mm; Conveyor belt speed (product-dependent): 10–100 m/min; User interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5–35 °C; Ejection system: optionally available as required; Power supply: 220VAC, 50/60Hz; System dimensions: L900 x W920 x H1825 mm; Weight: 350 kg. Hsdpfxev Nm Ino Ahusnl Please note that our new prices are often below conventional used prices. Feel free to send us an enquiry and describe your specific packaging application. We typically have 30–50 different new machines available ex stock for immediate delivery. For custom-built equipment, we offer very short lead times, starting from approximately 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, and general care products like shower gel, hair shampoo, hair gel, toothpaste, sun cream, etc. Suitable for pre-made tubes (closed with a cap) made of plastic. Fully automatic feeding, orientation of the tubes (rotation in the tray) using the print mark, as well as filling and sealing of the tubes. Before filling, the tube is air-rinsed to prevent contamination. The no tube – no fill function is also a standard feature. Water cooling system, batch/date printer, and dosing unit consisting of a pneumatic piston pump and storage tank with level sensor are included. PLC controlled, operated via touchscreen. Optional at extra charge: heated storage tank, agitator for storage tank, additional format sets (trays) for various tube diameters, external tube feeding lift. – Specifications: max. machine cycle speed (idle): 50 cycles/min; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (a separate tray is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage tank capacity: 40L; product contact parts made of stainless steel 316L; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to send us an inquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with a full warranty. Hedpfxsv Nldbj Ahuenl

Stanje: novo, Leto izdelave: 2025, Extra-large linear weighing unit for high-volume products with 1 weighing head. - Specifications: Weighing range: 5-25kg; max. machine cycle rate (idle): 10 cycles/minute; accuracy: 0.2% (depending on product); power: 2.0kW; machine dimensions: L3000xW2800xH4200 (including 1400mm support frame/customizable); weight: 1500kg. Hedpfsv Nmuzex Ahuenl The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are available from stock at all times. For machines manufactured to customer specifications, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical manufacturing and filling system for liquids in Doypack pouches (stand-up pouches) with integrated capping system. Includes liquid dosing unit (suitable for high-viscosity liquids). Pneumatic drive system, computer-controlled, easy operation and adjustment. Suitable for a wide range of film types: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: Filling volume: 100–550 ml; pouch dimensions: L(120–180)xW(100–150) mm; max. machine cycle rate in idle mode: 25 cycles/minute; accuracy: +/- 1.5%; power supply: 220V, 1.0 kW; compressed air: 0.4 m³, 6 bar; machine dimensions: L3700xW1000xH2550 mm; weight: 400 kg. Hodjv Nmz Uopfx Ahusnl The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual used-machine prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Cellophane wrapping machine for large products. - Specifications: max. machine cycle rate (idle): 23 cycles/minute; product dimensions (mm): L(100-405)xW(45-250)xH(25-115); machine dimensions (mm): L2200xW1000xH1700; power supply: 380V, 6.5kW; compressed air: 5-7 bar, 0.46 m³/min; weight (net/gross): 800/950kg. 1 tooling/set of format parts included, tear-off thread dispenser included, infeed conveyor (L1500xW240mm) also included. Hedpfx Ahjv Nkxwsujnl Please note that our new prices are often below common used equipment prices. Don’t hesitate to request a quote and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, PRO version of our standard sleeve packer/film banderoler, designed for packaging large products. Fully automatic product feeding, automatic transfer into an optional tunnel (SHRINKtunnel-PE-XL), and discharge. Completely enclosed housing, new design, and robust construction. - Specifications (may vary according to customer requirements!): PLC from MITSUBISHI/Japan; 380V, 2kW; 6 bar, 0.1 m³/min; max. machine cycle rate (idle): 25 cycles/minute; max. product dimensions (mm): L(unlimited)xW(200-550)xH(15-250); machine dimensions (mm): L1375xW1180xH1810; weight (net/gross): 500/580 kg. Hnodpfx Ajv Nl I Hjhusl Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines in stock for immediate delivery. For machines built to customer specifications, we offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical weighing and filling system for prefabricated large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets, etc. The system includes product feed, automatic weighing unit, conveyor belt, and sealing OR sewing module. The prefabricated bags are manually inserted into the pneumatic clamp holder by hand. The product is portioned by weight and filled into the bag. The bag is then conveyed by the conveyor belt to the sealing or sewing module for sealing or stitching. Hnedpfx Ahev Nm Dpsujl – Specifications: Weighing range: up to max. 25kg; max. machine cycle rate (unloaded): 200 bags/hour; accuracy: ±0.2% FS; power: AC 220V/380V, 50Hz, 2kW; compressed air: 6bar, 0.17 m³; all product contact parts made of stainless steel AISI 304; system dimensions depend on the final layout and can be customized. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new equipment prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines immediately available from stock. For custom-made machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, X-ray inspection system for medium-sized packages and pouches. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. Hnodpfxsv Nm Ius Ahujl - Specifications: Conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass from Ø 1.2 mm; X-ray power: 80 kVp, 7 mA; detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (product-dependent): 10 – 100 m/min; user interface: 15" touchscreen; software: intellisens® X-ray; operating temperature: 5 – 35 °C; reject system: available optionally as per requirements; power supply: 220 VAC, 50/60 Hz; system dimensions: L900xW920xH1825 mm; weight: 350 kg. Please note that our new prices are often below typical used machine prices. Feel free to inquire and let us know your packaging application. We usually have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. All machines are available with full warranty.