3-Rath Kalibrier+Prüftechnik Gmbh & Co. 3R-150M nakup rabljenega (104.790)

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. Klsdpfsymmtcsx Aqqst The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Z1015201800 Z1010880270 Kledpfxexy I D Us Aqqet itd.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 Klodpfx Aqju Hl R Tsqet COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Technical Details: Sheet thickness: 1 mm Ksdpfx Aqjwq I U Roqslt Stand width: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Machine weight approx.: 1,400 kg Machine dimensions approx. LxWxH: 2.7 x 1.15 x 1.3 m The machine is supplied without a foot switch, but is pre-wired for one. The previous owner modified the upper beam for a 60 mm adjustment range; a greater range is only possible by reverting the modification. Foot control for automatic operation is missing. Manual operation is functional. No backgauge.

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology Kodju Ul A Nspfx Aqqjlt - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 6.720 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22.303, višina skobljanja: 300 mm, širina skobljanja: 400 mm, največja hitrost vrtenja: 5.800 obr/min, vrsta nastavitve višine: električni, priključek za stisnjen zrak: 7 letvica, vhodna napetost: 400 V, število vreten: 12, moč: 111,2 kW (151,19 KM), odstranjevanje ostružkov: 20 mm, vhodna frekvenca: 50 Hz, vhodni tok: 327 A, Na prodaj je težek, industrijsko primeren štiristranski skobeljni stroj Rex 410 z obsežno HIT mehanizacijo, zasnovan za učinkovito obdelavo gradbenega lesa, KVH/BSH izdelkov in profiliranega blaga. Naprava je primerna za: • Predskobljanje • Skobljanje letev Kledpfx Aqeyk E R Ieqet • Fino skobljanje KVH/BSH • Proizvodnjo profilov • Neprekinjeno obdelavo nosilcev skupaj z obračanjem in popravili Stroj ima 12 vreten, vključno z rezkališči za posne robove, in je zasnovan za velike odvzeme materiala ter obdelavo večjih prečnih prerezov. Prodaja iz obratovalnega mesta (stroj ni razstavljen). Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2026, Tlačna peskalna kabina za notranje peskanje cevi z vrtljivo mizo in ročnim načinom peskanja Kedpfx Ajyn Inwjqqjlt - Filtrirna naprava - Vrtljiva miza s prizmo za vstavljanje kot podpora cevi - Pogonska notranja cevna šoba - Možnost shranjevanja programa: pot gibanja, hitrost podajanja, funkcija izpihovanja - Zunanja peskalna šoba z oscilacijo (opcija)

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. Klsdjdrtanspfx Aqqet The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2026, Vis sans fin de transport d'abrasif de 5 m avec capot doseur pour installation en tant que vis de transfert transversal vers l'élévateur à godets en bout de hall (insertion d'abrasif sur toute la largeur du hall à l'aide d'un chariot élévateur). - 5 m + sortie vers l'élévateur à godets, vis à ailettes pleines Ø250 mm avec spires de 5 mm d'épaisseur. - Peut servir de réservoir d'abrasif. La grenailleuse se réapprovisionne automatiquement si nécessaire via une sonde de niveau. - Selon la profondeur d'installation, permet d’effectuer des opérations de grenaillage jusqu'à 24 heures sans nettoyage du hall. - Nettoyage du hall possible en 10 minutes avec un chariot élévateur ou un chargeur sur pneus. - Très faibles coûts d'entretien et de réparation par rapport à un plancher convoyeur complet. - Particulièrement adaptée pour des pièces très lourdes. - Coûts d’acquisition inférieurs à ceux d’un plancher convoyeur complet. - Coûts de fondation réduits par rapport à un plancher convoyeur complet. Kljdpeynz Idefx Aqqjt - Peut être insérée sur toute la largeur du hall, contrairement à une fosse de balayage. - Garantie longue durée très élevée.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 150.050 h, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, premer vrtljive mize: 500 mm, skupna masa: 13.000 kg, največja hitrost vretena: 14.000 obr/min, delovne ure vretena: 6.950 h, dovod hladilne tekočine: 20 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 60, Oprema: ločilnik oljne meglice, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, • Stanje: vrhunsko stanje • Delovne ure: 6.950 • KESSLER-rotacijska miza, Ø 500 mm • Zaloga orodij: 60 postaj, HSK-A63 Klsdpfx Aqjx Hg Iboqot • Notranje dovajanje hladilne tekočine: 20 barov, s tračnim filtrirnim sistemom • Hladilni sistem: samodejni nadzor nivoja hladilne tekočine • Zrak skozi vreteno • Merjenje orodij: BLUM laserski merilni sistem za orodja • Merjenje obdelovanca: infrardeče tipanje obdelovanca (3D tipalni sistem), vključno s pripravo za merjenje obdelovanca • Nadzor trkov: POS DCM modul • Dovod medijev: 3-kanalni dovod medijev v sredini mize • Opazovanje: rotacijsko opazovalno okno • Ročno kolo Prosimo, pošljite nam neposredno povpraševanje na naši spletni strani, če vas zanima stroj. Iz tehničnih razlogov je neposredno povpraševanje za ponudbo prek zunanje platforme težavno in možno le z zamudo.

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Klodoynr E Topfx Aqqst Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage - etc. Fabriqué en Allemagne

Stanje: novo, Leto izdelave: 2026, Mobilní tlakový pískovací kotel 140 l pro použití na stavbě nebo pro stacionární použití. Armatury bezpečně umístěny pod držadlem. Velmi vhodné pro robustní stavební provoz. Skládá se z: - Tlaková nádoba 140 l - Předfiltr - Ochranný kryt proti povětrnostním vlivům - Odlučovač vody - Redukční ventil - Nastavení množství dopravovaného vzduchu (množství vzduchu v nádobě a pískovací hadici) - Pískovací hadice Ø25 mm, 10 m - Pískovací tryska Venturi Ø8 mm (spotřeba vzduchu při 6 bar cca 3,57 m³/min) - Ventil na směšování abraziva typu Y, pogumovaný pro snížené opotřebení - Filtr dýchacího vzduchu s hadicí 10 m - Pískovací helma Bezpečnostní vybavení: - Bezpečnostní tlačítko (dead man spínač) s ovládacím kabelem - Řízené rychlé odvětrání Volitelné příslušenství: - Větší držadlo s držákem hadice - Hlava pro mokré tryskání - Ohřívač dýchacího vzduchu - Transportní rám s nádobou Hobbock a víkem jako nadstavba pro vícedenní tryskání bez doplňování - atd. Kjdpfx Aqjynr E Heqelt Vyrobeno v Německu

Stanje: novo, Leto izdelave: 2026, Prenosni tlačni peskalni kotel 100l za gradbišča ali stacionarno uporabo. Armature varno nameščene pod ročajem. Zelo primeren za robustno uporabo na gradbišču. Sestava vključuje: - Tlačni kotel 100l - Predsito - Pokrov za zaščito pred vremenskimi vplivi - Odvlaževalnik zraka - Regulator tlaka - Nastavitev dovodnega zraka (količina zraka za kotel in peskalno cev) - Peskalna cev Ø25 mm 10 m - Venturi peskalna šoba Ø8 mm (poraba zraka pri 6 bar cca: 3,57 m³/min) - Y-ventil za mešanje peskalnega materiala, gumiran za manjšo obrabo - Filter za dihalni zrak s cevjo 10 m - Zaščitna peskalna čelada Varnostne naprave: - Varnostno stikalo (mrtvi mož) s krmilnim kablom - Krmiljeno hitro odzračevanje Opcijsko: - Večji ročaj z nosilcem cevi - Glava za mokro peskanje Kedpfjynr Emjx Aqqolt - Grelna enota za dihalni zrak - Transportno ogrodje z vedrom (Hobbock) in pokrovom kot nadgradnjo za večurno peskanje brez ponovnega polnjenja - itd. Izdelano v Nemčiji

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Kljdshfwcbspfx Aqqet Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, RHV-C&V GmbH & Co. KG zapiralec za steklene kozarce tip: LW560 Ksdpfx Aeyxgxwsqqslt številka: 10172/4184 leto izdelave: 09/2010 nerjaveči jekleni trak, širina traku: 120 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 15.606 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, moč: 30 kW (40,79 KM), volumenski pretok: 160 m³/h, Good day, We hereby offer you, without obligation, a used baling press from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Kedpfxoyplwfj Aqqelt Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block renewed) and tested during operation in both manual and automatic modes. The machine documentation is available in German. Inspection of the press is possible in our workshop by appointment. We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Ksdpfx Ajw E H E Rsqqslt Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Kjdpfxexdm Awo Aqqjlt Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump Kledewh Rp Eopfx Aqqot - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: zelo dobro (rabljeno), Postaje/oprema: Odvijalnik Navijalnik Odsesovalni sistem z drobilnikom (4x Lundberg Tip WT200-200U – l. 2018) Inertna ohišja Enota za laminacijo zbiralne letve Rezalne enote Laminirne enote / enote za nanašanje lepila Ogrevani valji Centralni računalnik Krmilne omare Kedpfxexzufhs Aqqelt Pogonski motorji Portalni žerjav Corona obdelava

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Natančen navijalni stroj za folije in tračne materiale. Namenjen za enakomerno odvijanje, vodenje in navijanje zvitkov. Integrirana varnostna zasnova z zaščitnim steklom, laserskim kazalcem začetne točke (zelena), zasilnimi stikali in pnevmatskim vodilom za folijo. Jeklen okvir stroja, pogon električno reguliran. Idealen za proizvodne linije v tehnologiji nanašanja premazov ali laminiranja. Kjdpfx Aexzuiyoqqjlt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, nosilnost: 4.000 kg, dvižna višina: 10.000 mm, napetost baterije: 48 V, lastna masa: 9.000 kg, Splošno: HUBTEX 2125-PU/SO z modelom MQ 40 je električni večsmerni bočni viličar s nosilnostjo 4 tone in prečno kabino. Ta viličar je primeren za skladiščne prostore, kjer sta potrebni maksimalna prilagodljivost in okretnost v ozkih prehodih za premikanje tovora do 4000 kg. M = večsmerno krmiljenje Q = prečna kabina 40 = 4.000 kg 2125 = serija PU = Vulkollan pnevmatike SO = nagibanje in spuščanje vilic, izvlečne vilice do 1500 mm, hidravlično nastavljiva širina vilic Ksdpfx Asx Aqaqoqqelt Dodatna oprema/Predelava: - Kameri na desni in levi strani vilic z monitorjem v kabini - Pozicijski laser na desni in levi strani vilic - Mehko gibanje pred odlaganjem vilic in pri prečkanju stopnic teleskopskega izvleka

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm Kjdpfxjwkpyhj Aqqolt • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts. Klsdpfjfnh Rvox Aqqet

Leto izdelave: 2025, stanje: novo, Vzdrževanju prijazna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predkomoro in udarnim ločevalnikom, popolnoma sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 1.4.B62.00 5000 m³/h (na voljo tudi druge velikosti) Sestava iz robustnega, vakuumsko tesnega 3 mm jeklenega ohišja, razdeljenega na surovi zračni prostor s filtrirnimi kartušami, filter s predkomoro in udarnim ločevalnikom ter čistim zračnim prostorom s čiščenjem filtrov s stisnjenim zrakom, vsak s posebnimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom za odstranjevanje prahu z uporabo Big Bag vreč. Magnetni ventil s prikazom diferenčnega tlaka za optimalno nastavitev čiščenja filtrirnih kartuš. Klodpfx Aelxyhfeqqet Servisna vrata kot nihajna vrata za enostavno vzdrževanje.