–60°C Do +170°C S Preizkusno Škatlo 1200 Litrov. nakup rabljenega (109.865)

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Isdpex Anipjfx Ab Aoat Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: Isdpfxsmmuq Io Ab Ajat 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: rabljeno, prevoženi kilometri: 477.026 km, moč: 338 kW (459,55 KM), prva registracija: 03/2021, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, Oprema: elektronski program stabilnosti (ESP), klimatska naprava, Transmission * Automatic transmission, 12+2 gears Assistance Systems * Cruise control Ijdpfxowrkuvs Ab Aeat * Lane keeping assist * Hill start assist Lighting and Visibility * Fog lights Exterior * Air suspension * Lift axle * Trailer coupling: Rockinger * Electrically adjustable and heated exterior mirrors * Axle load indicator * Connector plug 1x15 pin * Roof lift * Speed limiter: 90 km/h Safety * Intarder * Electronic Stability Program (ESP) * Front underrun protection * Emergency brake assist Interior * Fabric seats * Multifunction leather steering wheel * Sun visor Comfort * Air conditioning * Comfort seats for driver/passenger * Air-suspended driver/passenger seat * Height-adjustable driver’s seat * Driver’s armrest * Driver’s seat heating * Driver’s lumbar support * Driver’s seat ventilation * Suspended cab Additional Equipment * ECOSWITCH * VDI interface for telematics systems * Trailer version * Lift device for leading axle * OBU-preparation * ECO-Fleet * Driving style analysis (DSE) and driver fatigue detection (DAS) * ECO-ROLL Miscellaneous Dimensions and Weights * Fuel tank: 540 l * Second fuel tank: 540 l * Wheelbase: 4,800 mm ----Subject to prior sale and modifications

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A high-performance Drais pearl mill for the chemical and cosmetic industry is available. Grinding chamber volume: 15 l, operating temperature: 98°C, speed: 1470 rpm, throughput: 2500 l/h, power: 45 kW. An on-site inspection is possible. Iaodpfevnucdex Ab Ajt

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A complete painting line is available, comprising the following equipment: 1) Sergiani S.p.A. Monomatic S, year of manufacture: 2001. 2) Finnrose FLT 6, year of manufacture: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of manufacture: 1993. 6) Karl Heesemann FGA 6 EX, year of manufacture: 1993. 7) Finnrose FLT-4.5, year of manufacture: 1993. 8) Bürkle DAL2-1300, year of manufacture: 1985. Hackemack KTR 2040, year of manufacture: 1996. All machines are part of the painting system. On-site inspection is possible. Iaedotpp H Ejpfx Ab Aot

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Ijdpfoh Nypfox Ab Aoat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, višina središča: 225 mm, model krmilnika: Fanuc 16T, TEHNIČNI PODATKI Višina konic: 225 mm PODROBNOSTI STROJA Krmiljenje: Fanuc 16T Isdsxlix Djpfx Ab Aeat

Stanje: novo, Leto izdelave: 2026, Semi-Automatic Bandsaw CORMAK S-440R. The saw arm is made from a single-piece cast iron body, and with the application of a 34 mm cutting blade, it enables precise cutting of both profiles and solid materials. The bandsaw is equipped with a vise and hydraulic arm lowering and lifting. Isdji Dx R Njpfx Ab Aeat Machine characteristics: In semi-automatic band saws, once the switch is activated, the entire cutting cycle—clamping the workpiece in the hydraulic vise, activating the blade feed, lowering the cutting arm (speed adjustable), machine stop after the cut, raising the arm (lifting height adjustable), and releasing the hydraulic vise—takes place automatically. The arm, made from a single cast iron piece and equipped with a 34 mm blade, allows efficient cutting of both profiles and solid materials. Technical Data S-440R: MINIMUM CUTTING DIAMETER: ø5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm DISTANCE FROM BASE OF VISE TO FLOOR: 780 mm BLADE DIMENSIONS: 5200 × 34 × 1.1 mm TOTAL POWER: 4.4 kW BLADE SPEED: 20/90 m·min⁻¹ DIMENSIONS (L x W x H): 2500 × 1900 × 1450 mm WEIGHT: 1100 kg Max. Cutting Capacity [mm] S-440R Angle Round Rectangle Square Max Square 0° ø450 620×440 610×440 450×450 45° R ø440 500×190 360×440 420×420 45° L ø440 510×180 460×390 390×390 60° R ø330 330×170 170×440 300×300 60° L ø350 350×170 330×310 310×310 Standard Equipment: - PLC controller - Semi-automatic operation - Control console on separate pedestal - Control panel with LCD display - Built-in hydraulic unit - Hydraulic arm movement control (up/down) with stepless lowering speed adjustment - Arm position memory function (arm returns to preset height after cut) - Hydraulically controlled vise jaws (long-stroke cylinder with position memory) - Angle cutting left/right 60°- 45° - 0° - 45° - 60° - Digital display of set cutting angle - Adjustable blade speed with frequency inverter - Powered blade cleaning brush - Cooling system - Bimetal bandsaw blade - CE Declaration of Conformity - Technical documentation For further information, please visit our website.

Stanje: novo, Leto izdelave: 2026, Super-robust, reliable, and modern semi-automatic metal band saw with automatic arm raising and lowering. The saw arm swivels both left and right, from -45º to +60º. This machine is indispensable in any metalworking shop. The saw is perfectly suited for cutting pipes, profiles, and solid materials. Product Features The CORMAK S-200RH band saw comes standard with automatic arm lowering and raising, as well as a height regulator allowing the arm to be raised to match the height of the material being cut. Thanks to an automatic hydraulic damper, manual operation is limited to advancing and clamping the workpiece in the vise. The arm, made from a single-piece cast iron, together with the robust and stable frame, ensures exceptional rigidity for the S-200R saw, resulting in trouble-free operation and extremely high cutting precision. The innovative design and manufacture of CORMAK PREMIUM LINE semi-automatic and automatic saws, in accordance with ISO:90001 and ISO:140001 certification standards, ensures safety, quality, and reliability. The use of M3V series motors—from ABB, a renowned global manufacturer and world leader—guarantees long-lasting and trouble-free performance. As the manufacturer and sole representative on the Polish market, we ensure product authenticity and provide professional, well-trained warranty and post-warranty service. Technical Data TYPE – semi-automatic ARM RAISING AND LOWERING – hydraulic with stepless lowering adjustment BLADE SPEED – 36/70 mm/min MITRE CUTTING – left from 45° to right 60° VISE – hydraulic MINIMUM CUTTING DIAMETER – Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE – 30 mm VISE BASE HEIGHT – 780 mm SAW BLADE – 27x0.9x2910 mm TOTAL POWER – 2.1 kW DIMENSIONS (LxWxH) – 1600 x 800 x 1400 mm WEIGHT – 530 kg Angle 0º -----ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 Standard Equipment Iedpfxsi D D A Ss Ab Aoat - Control console on separate pedestal - Integrated hydraulic unit - Hydraulic arm movement control (up and down) with stepless lowering speed adjustment - Arm position memory function (arm returns after the cut to a predetermined height) - Mitre cutting left/right 45° - 0° - 45° - 60° - Saw blade cleaning brush - Cooling system - Bimetallic band saw blade - CE Declaration of Conformity - Technical and operation documentation The listed price is NET. Price does not include shipping costs. For more information, please contact us by phone or email. Please visit our website to view our full range.

Stanje: rabljeno, Leto izdelave: 2000, Sinker EDM machines Travel X: 825 mm Travel Y: 680 mm Travel Z: 405 mm Table size X: 1200 mm Table size Y: 850 mm Max. workpiece weight: 3,000 kg Electrode changer: 50 positions Generator: POCON 60 Iasdpfx Aevtfn Usb Ast Quill interface: EROWA Heavy-duty adapter O-module Halogen lamp

Stanje: novo, GMN / Schaudt TSE 70c - 25000/8 spindle, serial number 386347 8 - 8 - 6.5 kW S6-60%, 350-350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos. Iasdpfx Abeqfub As Aet

Stanje: novo, GMN / Schaudt TSE 70c - 25000/8 spindle, serial number 371461 8 - 8 - 6.5 kW S6-60%, 350-350V, unused in opened original packaging, 100% operational, scope of delivery as shown in the photos. Iedpfx Absqfubxj Asat

Stanje: pripravljen za uporabo (rabljen), Bosch VM 60-C supply module, serial number as shown in photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Iasdpfx Absi D Uhge Aet

Stanje: rabljeno, nosilnost: 6.000 kg, dvižna višina: 3.600 mm, prosto dvigovanje: 1.120 mm, tip droga: triplex, gradbena višina: 2.200 mm, širina nosilnega okvirja vilic: 1.530 mm, dolžina vilic: 1.600 mm, lastna masa: 11.995 kg, skupna dolžina: 30.000 mm, vrsta pogona: Elektro, gradbena širina: 1.540 mm, Electric 4-wheel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Technical condition: good Front tires type: Non-marking Iaodpfx Aot Ddvzjb Aot Rear tires type: Non-marking Hydraulic side shifter with fork positioner (opening range of forks: inside edge to inside edge = 50 mm to 1,140 mm)

Stanje: novo, GMN TSSV 170 s - 12000 / 18 A visokohitrostno vreteno, serijska številka: R 237633, nerabljeno, 100% delujoče, obseg dobave po fotografijah. POZOR: Stroški pakiranja in pošiljanja na povpraševanje! Iaodpfx Abox Erqlj Aot

Stanje: novo, GMN TTSV 170 S - 12000 / 18 A visokohitrostno vreteno, SN: R 287831, nerabljeno, 100 % delujoče, obseg dobave po slikah. POZOR: Stroške pakiranja in pošiljanja prosimo povprašajte posebej! Iedpfx Aox Dwqljb Aoat

Stanje: rabljeno, Leto izdelave: 2016, x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm Control: iTNC 530 HSCI Heidenhain Max. clearance between columns: 5,090 mm Ijdpsx Avqbsfx Ab Ajat Distance spindle centre to table: 1,825 mm Type: 175149A-0007 Main spindle speed range: max. 19,800 rpm Main spindle drive power: 20 kW Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Type: 178099-0005 Main spindle speed range: max. 10,020 rpm Main spindle drive power: 20 kW Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Clamping table area: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Number of T-slots: 12 T-slot width: 28H12 mm T-slot spacing: 250 mm Number of tool positions: 62 (38+24) pos. Number of tool positions HSK A63: 37+1 pos. Number of tool positions HSK A100: 23+1 pos. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm b-axis +115° / -115° c-axis +/- 200° Total power requirement: 180 kVA Space requirement approx. 12.5 x 15.0 x 7.0 m 5-axis high-speed portal large machining centre DROOP & Rein - FOGS 40 60 C - Fork-type milling head

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch heating oven with nitrogen supply. Vötsch heating oven with nitrogen supply Nominal temperature: 250°C Nominal current: 10 A Connected load: 6.3 kVA Nominal voltage: 400V 3(N)PE AC 50/60Hz Nominal power: 6 kW Type: TU 60/60 G-ISO Condition: Used Scope of delivery: (See picture) (Changes and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone. Iedpfx Aed Ngg Tob Asat

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Iaodpfxjtr Dinj Ab Ajt Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: zelo dobro (rabljeno), Here we offer you a Stäubli RS60 robot with CS8 C controller. Stäubli RS60 robot with CS8 C controller for demanding assembly tasks. Payload: 2 kg Axes: 4 Description Working range: 600 mm Internal radius: 166 mm Iaodpfx Aefia I Rjb Aot Repeatability: +/- 0.01 mm Dimensions (W x H x D): 810 x 976 x 710 mm Weight: 70 kg Type: RS 60 / Controller CS8 C Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data. All information without guarantee!) Further questions can be answered by phone.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Iasdpsvitmdsfx Ab Ast For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40°C to +180°C Humidity Range: 10% to 98% relative humidity +10°C to +90°C within the temperature range +5°C to +89.5°C within the dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Enclosure: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Nominal Voltage: 230V 1/N 50 Hz Power: 3.3 kW Nominal Current: 13 A Important Information for Buyers – For your security: The following services are carried out on all chambers we offer prior to sale: Iedpfx Aju Hlb Esb Aoat 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful checks, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Isdpfou U Ixmox Ab Aoat Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Ijdpexr A R Tjfx Ab Aeat Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Leto izdelave: 2023, obratovalne ure: 2.000 h, stanje: rabljeno, Pogon: Dizelsko-električni Moč: 55 kW / 80 kVA Oprema: Vnaprej določene frakcije Sistem za hitro menjavo Centrifugalni separator Duramax čistilni elementi Split-Speed sistem Ekstra dolgi transportni trakovi Delovni položaj: Dolžina (mm): 12.700 mm Širina (mm): 11.200 mm Nalagali rob (mm): 3.500 mm Višina izmeta (mm): 3.500 mm Transportne dimenzije: Dolžina (mm): 11.950 mm Širina (mm): 2.550 mm Višina (mm): 4.000 mm Teža (kg): 25.000 OPTIONALNO na voljo: Kamniti trak Gosenicno podvozje Magnetni valji Vetrovi separator Avtomatsko centralno mazanje Iajdsxrzymepfx Ab Ast In še veliko več...