Sumitomi (Shi) Demag Systec 100/420-310 nakup rabljenega (28.600)

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18615 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Bdodpoza Dc Uofx Akrjc Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: A technology that sets standards in energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced full-electric drive technology to the plastics injection molding industry in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when a movement is actually required. This fundamental difference allows for 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · Water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · Water-cooled servo motor This motor, based on the same Siemens MOTICS 3 platform, ensures homogeneous plasticizing of the material through precise speed and torque control; the water-cooled design ensures stable operation even during intensive, long-term production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw return, ejector, and plasticizing are all fully servo-driven. As each axis can be programmed independently, all movements can be executed simultaneously. This architecture offers micrometer-accurate repeatability, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The keypad-based NC4 system manages all machine parameters — including injection profile, mold protection, and cycle analysis — from a single screen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Bodpfx Akoy Smkmjrsdc Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m Bedpoy Sl Anofx Akrsdc All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Bjdoy Sl Ahjpfx Akrjdc Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 500 kN, Demag Systec 50/370-120 (2008) Bsdpfx Asy Eyq Hjkredc

Stanje: rabljeno, Leto izdelave: 2014, (1) Stroj za brizganje, Ravnanje: Sepro Robotique | Success 22 | 2016 Kontrola temperature: GWK Razno: 1x zaščitni pokrov 1x transportni trak, 1x transportna enota, podjetje Somos FG 204; leto izdelave 2022 Tehnične podrobnosti: Sila zapiranja (kN): 2100 Razmak veznih stebrov (mm): 580 Brizgalna enota: 430 Napajanje: 3/400 V Bdsdpoy N R R Eefx Akrsc Frekvenca (Hz): 50 Tok 1 (A): 175 Tok 2 (A): 116 Tok 3 (A): 59 Teža (t): 8,93 Tlak (bar): 190

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: Technology that convinces in terms of energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when actual movement is required. This fundamental difference enables 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Bdodpfx Aozabkvokrec Main drive motor · water-cooled servomotor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · water-cooled servomotor This motor, also based on the Siemens MOTICS 3 platform, plasticizes the material with precise speed and torque control to achieve a homogeneous melt; the water-cooled design ensures stable operation during long-term, intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servomotors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single screen.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Hydraulic injection moulding machine from 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mould height of 1530 mm. It is equipped with a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking for a high-quality injection moulding machine, you should consider the DEMAG 420/810 - 2300 we are offering for sale. Please contact us for further details. • Tie bar distance (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mould height: 820 mm • Max. mould height: 1530 mm • Max. daylight between platens: 1530 mm • Max. weight of the moving mould half: 2200 kg • Diameter/height of the centring ring: 160 × 15 • Sprue bush radius: R19 • Diameter of the ejector coupling thread: M24 • Shot volume: 1090 cm³ • Hot runner zones: 8 • Air cascade (quantity): 6 • Cascade hydraulics (quantity): 6 • Hydraulic core pulls: 2 • Oil fill capacity: 730 • Power supply: 217 A • Connected load: 127.5 kW Additional equipment Bdjdpsy Nyflofx Akrec • Robot: Demag, year of manufacture 2002

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Bodey Ub D Topfx Akredc Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. Bedpfx Akey Ub D Hsrsdc All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Bsdpfx Aey Ub Dtjkrsdc Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stroj Sumitomo DEMAG Systec 120/470-600 NC 5, letnik 2008, s krmiljenjem NC 5, polžem 45 mm, prostornino vbrizga 323 ccm / 294 g, zapiralno silo 1200 kN, razmak med vodili 470 mm x 470 mm, minimalna višina orodja 150 mm, maksimalna razdalja med ploščama 850 mm (900 / 950 z WA), hod odpiranja orodja 800 mm, hod izmetalca 180 mm. Stroj je trenutno v prenovi in se testira za delovanje. Bdedpfx Aey Tcu Dskrjc

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag ergotech sys 50-200 (1992) Bdodpfx Akoyyztfsrec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, vpenjalna sila: 600 kN, premer vijaka: 30 mm, razmak između stupova: 420 mm, delovna prostornina: 106 cm³, tlak vbrizgavanja: 1.995 letvica, minimalna višina orodja: 200 mm, Tehnični podatki Splošne informacije: Letnik izdelave: 2001 Krmiljenje: NC4 Teža: 3950 kg Dimenzije (d × š × v): 4,2 × 1,4 × 2,0 m Vbrizgalna enota: Tip: … / 200 Premer polža: 30 mm Razmerje L/D polža: 20 Bjdsyxnumopfx Akredc Specifičen tlak vbrizga: 1995 bar Vbrizgalni volumen: 106 cm³ Teža vbrizga: 94 g Zapiralna enota: Tip: 60 / … Zapiralna sila: 60 t Dimenzije plošč: 600 × 600 mm Razmik med stebri: 420 × 420 mm Višina orodja: 200 mm Hod odpiranja: 550 mm Maksimalna razdalja med ploščama: 750 mm

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program Bdsdpfsx D Nlujx Akrec • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 30 mm, Injection moulding machine from Demag, model 80/420-200 System, for sale. The machine is in good and fully functional condition. ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Bdsdpfxsnfu I Io Akrec Clamping force: 800 kN Tie bar distance (vertical): 420 mm Tie bar distance (horizontal): 420 mm Platen size (horizontal): 590 mm Platen size (vertical): 600 mm Minimum installation height: 250 mm Maximum platen gap: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Max. mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.5 x 2 m Weight: 4 t Transport and loading can be organised across Europe at extra cost on request. Prices plus VAT. Inspection possible upon appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet economical metalworking machine for your production? Or would you like to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), največja hitrost vrtenja: 2.700 obr/min, Demag motor/reduktor KBA 100 A -12/2 ED = 15/40% Bdodpfx Akoywkq Ujrec 0,21 / 2,2 kW 425 / 2700 o/min Zobniški prenos DO8 i = 3,24 premer osi 50 mm Stanje: kot nov cena na vprašanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between platens: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Bdedjww H Nyepfx Akroc Complete machine history – available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Bdsdpjww H S Iofx Akroc Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection unit – two-component First unit (horizontal): Nitrided screw Screw diameter: 22 mm Second unit (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heating power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history – available

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, številka stroja/vozila: MIKA272, Tehnični podatki: 1 Demag / Timmer KBK 100 stebrni vrtljivi žerjav, nosilnost 125 kg Nosilnost vakuumskega dvigala: 40 kg Bdodpfx Asx U N Itokrjc Višina: cca 3 m, spodnji rob iztega: cca 2,65 m Izteg: cca 3 m, dvig vakuumskega dvigala do cca 1,8 m Teža: cca 350 kg S Timmer vakuumskim dvigalom vklj. z vakuumsko enoto, nosilnost 40 kg Idealno za komisioniranje ali prepakiranje Priklop na 400V 16A, obračalni kot 270° Žerjav je demontiran in spakiran na paleti Zelo dobro stanje, glejte slike Lokacija artikla: 75053 Gondelsheim Prodaja se le žerjavski sistem, viden na slikah Dostava preko špedicije ali osebni prevzem po dogovoru

Stanje: rabljeno, Electric chain hoist, electric lifting gear, crane DEMAG type DKUN 1-100 K V1 F4 Serial no. 61801899, year of manufacture 1997 Load capacity: 100 kg Lifting height: 3 meters Main lifting speed: 8 m/min Creep lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.7 meters Bodpfehtr Eyex Akrsdc Power supply: 400 Volt, 50 Hz 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Stanje: rabljeno, Electric Chain Hoist, Electric Hoisting Gear, Crane DEMAG Type DKUN 1-100 K V1 F4 Serial No. 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min. Creep lifting speed: 2 m/min. Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 Volt, 50 Hz Bdjdou Swb Ujpfx Akrjc 1 fall = 100 kg Net weight: 16.5 kg Good condition

Stanje: novo, DEMAG rope sheaves / running rollers – 19 units total: 6 pcs. diameter 180 mm / bore 40 mm 2 pcs. diameter 260 mm / bore 45 mm Bjdju U Rayjpfx Akrsdc 6 pcs. diameter 260 mm / bore 90 mm 1 pc. diameter 310 mm / bore 90 mm 4 pcs. diameter 410 mm / bore 90 mm

Stanje: rabljeno, CNC control, operating panel, control console, control unit, card slot, control cards, MC3 control, plug-in cards, PCBs, valve module, valve amplifier, circuit board, analog distributor card, distributor PCB, valve amplifier, bus PCB, bus board, processor card, interface card, temperature control card -Manufacturer: Mannesmann Demag, electronic control modules from Demag D 100-275 NC injection molding machine -Card carrier: Murrelektronik 630055 Bdedpfjn Hbc Isx Akrjc -Control card: Philips 9404 780 020 -Single components: see photos -Price/sale: as a complete set -Overall dimensions: 315/140/H215 mm -Weight: 1.4 kg

Stanje: dober (rabljeno), CNC kontrola, upravljalna plošča, upravljalni pult, upravljalna enota, nosilec za kartice, krmilne kartice, MC3 kontrola, vstavne kartice, tiskana vezja, ventilni modul, ojačevalnik za ventil, vezna kartica, analogna distribucijska kartica, distribucijsko tiskano vezje, ojačevalnik ventila, povezovalna tiskana vezja (busprint), povezovalna osnovna plošča (busplatine), procesorska kartica, vmesna kartica, kartica za regulacijo temperature -Proizvajalec: Siemens, krmilni elektronski moduli iz brizgalnega stroja Demag D 100-275 NC -Napajalnik: tip E220 G5/15WRGD -Adapter kapsula: tip 6ES5 491-0LB11, 5 kosov -Vmesniški modul: 6ES5 306-7LA11 -Podnožje za module: 6ES5 700-2LA11 -Posamezne komponente: glej slike -Cena/prodaja: komplet Bodpfx Akon H Etferjdc -Dimenzije skupaj: 485/220/Višina 305 mm -Teža: 12,3 kg