Stroj za brizganje

DEMAG Multi 80/420-80h/120v

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Nkjdpfx Abeww H Nysbjt Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between platens: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history – available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Demag Ergotech-System 250/280-80 Schließkraft 25 t Schnecke 25 mm Baujahr 2003 Angussentnahmeroboter 2 Stück Nkjdpfx Ajhrw Amjbbst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7154-0118, vpenjalna sila: 800 kN, odmični hod: 500 mm, širina plošče: 590 mm, višina plošče: 600 mm, TECHNICAL DETAILS Control type: NC 4 control system Locking system: Hydraulic Nkedpfx Abswp I Syjbot Clamping force: 800 kN Clear distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Minimum mold size: 250 mm Maximum opening stroke: 500 mm Maximum distance between plates: 750 mm Screw diameter (horizontal): 18 mm Screw diameter (vertical): 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating units: 8.8 kW Dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg Main connection: 400 V, 50 Hz, 135 A Maximum pressure: 210 bar Maximum flow rate: 130 l/min FEATURES - Two-component machine - Horizontal nitrided system - Vertical configuration with bimetallic screw - Complete machine documentation available

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Nkjdpfxorthkus Abbjt Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Nedpforgw Exsx Abbokt Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: pripravljen za uporabo (rabljen), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment Machine is disconnected / No cooling water connection Machine is professionally stored Nkodpju Ti Srefx Abbot Technical specifications: Clamping force: 800 kN Mounting plate dimensions (mm): 610×610 Tie bar distance (mm): Mould height (mm): 250 Platen opening (mm): 750 Control system: MC4 Display language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil filling volume (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Nedpfopdr Aiex Abbokt Schließkraft 80 Tonnen Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Refrigeration units Brand: Ers Model: SC 110. V/5 Power: 8 kW Nedsd I Tlhopfx Abbskt Year of manufacture: 2000

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 250 t Njdpfx Abovbbvksbekt Screw diameter: 70 mm Tie bar spacing (vertical): 630 mm Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Stanje: novo, Leto izdelave: 2018, Specific cooling capacity 20550/42°C Qa Coolant R134a/1430 Refrigerant Pressure 20 bar Total power requirement 14.5 kW Machine weight approx. 186 kg Space requirement approx. 0.5 x 0.5 x 2.1 m The models of the HYFRA Gamma series are designed as immersion coolers for the cooling of water, oil, and emulsion. The plug-and-play immersion coolers are ready to install and can be used with just 0.5 m² of floor space, making them ideal for integration into various machine layouts. Cooling capacities of up to 28 kW are possible thanks to the compact design with only 0.5 m² footprint. This provides significant flexibility advantages when planning production floor layouts and leads to increased productivity, as more production machines can fit into the available space. In the compact models of our immersion coolers, the condenser is installed horizontally. This construction method significantly reduces heat dissipation. Internal components remain unaffected by waste heat. A robust agitator ensures a consistent medium temperature in the lubricant tank for all immersion cooler models in this series. For regular maintenance, the HYFRA Gamma series can be easily lifted out of the tank using fixed crane lugs. Immersion coolers: High-performance cooling directly at the application How does an immersion cooler work? With immersion coolers, the evaporator of the cooler is placed directly into the cooling medium. The liquid is held in a tank and is continuously and vigorously circulated for efficient cooling, with powerful agitators supporting this process. For which applications are immersion coolers suitable? Njdeul Ekpopfx Abbjkt Immersion coolers are often used for temperature control of cooling lubricants in filtration and mechanical engineering to ensure the performance of the connected equipment. They are also used in metalworking, indirectly cooling tools and workpieces. Typical applications include milling and grinding with CNC machines or conventional machine tools. Immersion coolers with advanced controls and comprehensive features Depending on the cooling capacity, HYFRA Gamma model immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of the FreeAdvanced control system and a touch panel provides structured overviews and easy reading of relevant values. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced control system also features a full-text display and supports Modbus TCP.