Stapler Center Fritz Gmbh Tpw 30 Al-As-Se nakup rabljenega (105.034)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Lsdpou Ey Dlsfx Af Soag For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Mobilní tlakový pískovací kotel 140 l pro použití na stavbě nebo pro stacionární použití. Armatury bezpečně umístěny pod držadlem. Velmi vhodné pro robustní stavební provoz. Skládá se z: - Tlaková nádoba 140 l - Předfiltr - Ochranný kryt proti povětrnostním vlivům - Odlučovač vody - Redukční ventil - Nastavení množství dopravovaného vzduchu (množství vzduchu v nádobě a pískovací hadici) - Pískovací hadice Ø25 mm, 10 m - Pískovací tryska Venturi Ø8 mm (spotřeba vzduchu při 6 bar cca 3,57 m³/min) - Ventil na směšování abraziva typu Y, pogumovaný pro snížené opotřebení - Filtr dýchacího vzduchu s hadicí 10 m - Pískovací helma Bezpečnostní vybavení: - Bezpečnostní tlačítko (dead man spínač) s ovládacím kabelem - Řízené rychlé odvětrání Laedsynr E Hepfx Af Sog Volitelné příslušenství: - Větší držadlo s držákem hadice - Hlava pro mokré tryskání - Ohřívač dýchacího vzduchu - Transportní rám s nádobou Hobbock a víkem jako nadstavba pro vícedenní tryskání bez doplňování - atd. Vyrobeno v Německu

Stanje: novo, Leto izdelave: 2026, Cuvette de sablage sous pression 200 l, mobile, pour chantier ou usage stationnaire. Robinetterie montée en toute sécurité sous la poignée. Très bien adapté aux utilisations intensives sur chantier. Composition : - Réservoir sous pression 200 l - Tamis de préfiltration - Couvercle de protection contre les intempéries - Séparateur d'eau - Détendeur - Réglage de l'air de transport (débit d’air pour la cuve et le tuyau de sablage) - Tuyau de sablage Ø25 mm, 10 m - Buse de sablage Venturi Ø8 mm (consommation d'air à 6 bar env. 3,57 m³/min) - Vanne de mélange d'abrasif, pièce en Y caoutchoutée pour une moindre usure - Filtre à air respirable avec tuyau d'air 10 m - Casque de sablage Systèmes de sécurité : - Interrupteur homme mort avec câble de commande - Dégazage rapide commandé En option : Lsdpfx Aeynr E Tof Soag - Poignée agrandie avec support pour tuyau - Tête de sablage humide - Chauffage pour air respirable - Châssis de transport avec seau Hobbock et couvercle pour plusieurs heures de sablage sans remplissage - etc. Fabriqué en Allemagne

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Ljdou Hy Tpepfx Af Soag For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 4.000 mm, notranja dolžina: 6.000 mm, notranja višina: 3.000 mm, filtrirna površina: 99 m², volumenski pretok: 7 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast room for all types of abrasive media, constructed from steel with insulated panels, including filtration system, recirculating air system, abrasive media preparation, 200L automatic refill pressure blast pot, blast hose with deadman control, breathing air system, LED lighting, wall lining made of 70 Shore 4mm reinforced rubber sheet, sweep pit with bucket elevator. Abrasive media recovery via sweep pit with bucket elevator, upgradable to cross screw conveyor with dosing hood across the full width as a sweep pit or as a complete flat conveyor floor. Workpiece transport is retrofittable: blast trolley with rail bed, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradable with a suitable magnetic drawer or electrically driven magnetic drum separator. For blasting with two different types of abrasive media (ferritic and mineral), upgradable with magnetic drum separator, final demagnetization stage, and a second air classifier for separation and cleaning of the abrasive media. Safety equipment: Emergency lighting with battery backup, emergency stop switches inside the cabin and externally, viewing window into the blast chamber, gate/door limit switches, deadman control, pressure vessel quick venting. Warranty of up to 5 years on various components. Lsdpfx Asu A A Tkef Seag 50 years of experience and more than 3,000 systems installed in blast plant construction.

Stanje: novo, Leto izdelave: 2026, Prenosni tlačni peskalni kotel 100l za gradbišča ali stacionarno uporabo. Armature varno nameščene pod ročajem. Zelo primeren za robustno uporabo na gradbišču. Sestava vključuje: - Tlačni kotel 100l - Predsito - Pokrov za zaščito pred vremenskimi vplivi - Odvlaževalnik zraka - Regulator tlaka - Nastavitev dovodnega zraka (količina zraka za kotel in peskalno cev) - Peskalna cev Ø25 mm 10 m - Venturi peskalna šoba Ø8 mm (poraba zraka pri 6 bar cca: 3,57 m³/min) - Y-ventil za mešanje peskalnega materiala, gumiran za manjšo obrabo - Filter za dihalni zrak s cevjo 10 m - Zaščitna peskalna čelada Varnostne naprave: - Varnostno stikalo (mrtvi mož) s krmilnim kablom - Krmiljeno hitro odzračevanje Opcijsko: Laedpfeynr Emex Af Ssg - Večji ročaj z nosilcem cevi - Glava za mokro peskanje - Grelna enota za dihalni zrak - Transportno ogrodje z vedrom (Hobbock) in pokrovom kot nadgradnjo za večurno peskanje brez ponovnega polnjenja - itd. Izdelano v Nemčiji

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) Ljdpfjunh Hrox Af Soag • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives. Lsdpfx Afsdrtane Ssag

Stanje: rabljeno, Leto izdelave: 2014, Za dodatne informacije se obrnite na Center za rabljeno opremo. Ledpfozfldpex Af Soag

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Lsdpfx Afsyxccrs Sjag Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 2.050 mm, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Univerzalni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok spekter označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda kovina, aluminij in plastika. Odvisno od zahtev lahko sistem opremite z vlakenskim laserjem z močjo 20, 30 ali 50 W. Za trajno označevanje je uporaba laserja v številnih panogah danes nepogrešljiva. Z zmogljivo lasersko programsko opremo lahko ustvarite besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega programerske znanja, in to z le nekaj kliki. Programska oprema samodejno povečuje serijske in številke izdelkov po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (variabilne informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v preddefnirana območja. Možna je tudi uporaba ročnega skenerja. Standardna oprema vključuje vgrajen osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z vrtljivo osjo (3-čeljustno vpenjalno glavo) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranske konzole za označevanje dolgih delov, pomična os Z, sistemi predalov itd. Laodpfx Afezntfmo Ssg Izdelano v Nemčiji Vlakenski laser 30 W, 20 W ali 50 W • Laserski razred 1 • Valovna dolžina 1064 nm • Velikost območja označevanja 150x150 mm (po želji večje) • Programska oprema za označevanje EZCAD v nemščini / angleščini • po želji: vrtljiva os (3-čeljustna vpenjalna glava) • po želji: digitalni sistem za merjenje višine • po želji: sistem za samodejno ostrenje – sistem za samodejno določanje razdalje do žarišča • po želji: sesalni sistem (vključno z aktivnim ogljikom) • Pilotni laser (preprost predogled, predogled obrisa) • Iskalnik žarišča (enostavna nastavitev žarišča) • Signalna luč za prikaz delovnega stanja • največja višina obdelovanca približno 300 mm • Električno nastavljiva os Z • Vgrajen osebni računalnik z operacijskim sistemom Windows • Nastavljiva višina stojala za zaslon in tipkovnico • Okvir iz aluminijastega profila • Hladi s zrakom • Izjemno velik notranji prostor • Širina vrat približno 700 mm / višina vrat (odprtina): 400 mm • Priključek 230 V • Dimenzije: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Univerzalni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok spekter označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda kovina, aluminij in plastika. Odvisno od zahtev lahko sistem opremite z vlakenskim laserjem z močjo 20, 30 ali 50 W. Za trajno označevanje je uporaba laserja v številnih panogah danes nepogrešljiva. Z zmogljivo lasersko programsko opremo lahko ustvarite besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega programerske znanja, in to z le nekaj kliki. Programska oprema samodejno povečuje serijske in številke izdelkov po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (variabilne informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v preddefnirana območja. Možna je tudi uporaba ročnega skenerja. Standardna oprema vključuje vgrajen osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z vrtljivo osjo (3-čeljustno vpenjalno glavo) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranske konzole za označevanje dolgih delov, pomična os Z, sistemi predalov itd. Izdelano v Nemčiji Vlakenski laser 30 W, 20 W ali 50 W • Laserski razred 1 • Valovna dolžina 1064 nm • Velikost območja označevanja 150x150 mm (po želji večje) • Programska oprema za označevanje EZCAD v nemščini / angleščini • po želji: vrtljiva os (3-čeljustna vpenjalna glava) • po želji: digitalni sistem za merjenje višine • po želji: sistem za samodejno ostrenje – sistem za samodejno določanje razdalje do žarišča • po želji: sesalni sistem (vključno z aktivnim ogljikom) • Pilotni laser (preprost predogled, predogled obrisa) • Iskalnik žarišča (enostavna nastavitev žarišča) • Signalna luč za prikaz delovnega stanja • največja višina obdelovanca približno 300 mm • Električno nastavljiva os Z • Vgrajen osebni računalnik z operacijskim sistemom Windows • Nastavljiva višina stojala za zaslon in tipkovnico • Okvir iz aluminijastega profila • Hladi s zrakom • Izjemno velik notranji prostor • Širina vrat približno 700 mm / višina vrat (odprtina): 400 mm Ljdpfx Aeznr Sxef Soag • Priključek 230 V • Dimenzije: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Laodpfega Ehbsx Af Seg

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag Ljdpfow Ivk Tex Af Soag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: dober (rabljeno), Univerzalni orodjarni rezkalni stroj Fritz Werner tip 5130 Izjemno robusten in natančen univerzalni orodjarni rezkalni stroj uglednega nemškega proizvajalca Fritz Werner (model 5130). Ta konvencionalni konzolni rezkalni stroj izstopa po masivni sivi litini in vrhunski zanesljivosti. Idealna izbira za delavnice, orodjarne, servisne obrate, zahtevne domače mojstre ali izobraževalne ustanove. Lodpfozcw Ddex Af Ssag Stroj je opremljen z vrtljivo navpično rezkalno glavo z ročnim pomikom pinole (odlično za dodatna vrtalna dela) ter mehanskim podajalnim menjalnikom. Posebna prednost stroja je naknadno vgrajena premium varnostna zaščita vretena znamke Tecno Più. Tehnični podatki na kratko: Proizvajalec: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Tip / model: 5130 (serija 5.130) Izvedba: konvencionalni univerzalni orodjarni rezkalni stroj Orodni držalo: SK 40 (stožčasti nastavek z vpenjalno palico) Mere mize: pribl. 600 x 215 mm s 3 vzporednimi utori v obliki T Pomik osi: ročni prek preciznih ročnih koles (2 mm hoda na obrat) + avtomatski podajalnik (tip 101) Navpična glava: vrtljiva ± 90° z ročico za premik pinole in nastavljivim globinskim omejevalnikom Pogon: trifazni motor (400 V, vključno s CEE vtikačem) Priložena dodatna oprema: masivni strojni primež (montiran na mizo), vpenjalna palica, zaščitni pokrov pred ostružki Varnostna nadgradnja (vključena): Zaščita vretena: Tecno Più S.r.l. (model PTR 11/180) Leto izdelave zaščite: 2017 (s CE oznako) Funkcija: odporna polikarbonatna zaščitna plošča (180 mm) z varnostnim mikro stikalom IP67 za samodejny izklop vretena ob odprtem pokrovu. Več rezkalnih strojev – novih in rabljenih – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: rabljeno, prevoženi kilometri: 2.600 km, moč: 18 kW (24,47 KM), prva registracija: 05/1975, vrsta goriva: dizel, skupna masa: 1.300 kg, barva: zelen, vrsta prenosa: mehanski, vzmetenje: drugo, obratovalne ure: 2.600 h, Oprema: pogon na vsa štiri kolesa, Prvá ruka, nové STK/emisná kontrola, diesel, manuálna prevodovka, pohon všetkých kolies, prvá registrácia 23.05.1975, 2 600 motohodín. Holder fréza v pôvodnom stave, prípustná celková hmotnosť 1 300 kg, prvý majiteľ. Verzia s trávnikovými pneumatikami je tiež možná, obe možnosti sú k dispozícii. PRE NÁS JE ROZHODUJÚCI STAV A CELKOVÝ DOJEM, CENA JE AŽ NA DRUHOM MIESTE. V prípade ďalších otázok vám rád pomôže pán Schlägel na uvedenom čísle. //*VÝMENA, PROTIÚČET ALEBO ZALOŽENIE VAŠEHO VOZIDLA, AKO AJ FINANCOVANIE, MOŽNÉ! Všetky informácie sú bez záruky.* Viac ponúk nájdete na našej domovskej stránke. Popis a uvedené údaje nepredstavujú záväzný prísľub a nie sú záväzné. Záväzná je len kúpna zmluva uzavretá pri kúpe vozidla v našom autosalóne. Zmeny a predbežný predaj vyhradené! Lsdevictmspfx Af Seag

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Ljdpfxjh Eulgo Af Soag

Stanje: rabljeno, lastna masa: 5.780 kg, največja dovoljena obremenitev: 20.920 kg, skupna masa: 26.700 kg, konfiguracija osi: 2 osi, prva registracija: 06/2011, naslednji pregled (TÜV): 06/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.200 mm, vzmetenje: zrak, medosna razdalja: 1.300 mm, Leto izdelave: 2011, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German semi-trailer * Single ownership * Special low-loader trailer from premium manufacturer Meusburger * Type MPG - 2 * Body with sliding roof device * Enables side loading * Loading possible from the top and rear as well * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * Payload: 21t * 3 x 4.2t capacity Altec loading ramps * Ramp compartment * Sliding tarpaulin left and right with Edscha sliding roof * Platform dimensions: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Front platform loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m Laedperkn R Tefx Af Ssg * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW eco plus axles * Air suspension with lifting/lowering function * 2 x extendable toolboxes * ABS/EBS * Gross vehicle weight: 26,700 kg * Curb weight: 5,780 kg * Payload: 20,920 kg * King pin to front dimension: 1.45 m * King pin to front diagonal: 1.75 m * King pin to rear dimension: 9.35 m If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Notice: We recommend and strongly advise an inspection and examination of the goods to avoid any misunderstandings regarding condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, valovna dolžina laserja: 1.064 nm, AL-IN 300 W, laser welding machine, demonstration unit, as new, 1-year warranty, on the original pallet, partially still packaged. Further demo units available on request. Sale only within the EU. - Motorized X, Y, Z axes, controllable via joystick and semi-automatic modes - User Coordinate System (UCS) – automatic Z-axis guidance when welding on an inclined plane Ledopcf Ntspfx Af Seag Accessories: Tilting/swivel optics Ergonomic wedge for optimal working position Multi-function footswitch Angled foot with table plate for ALT-Basis C Swiveling beam deflection unit 110° L/R incl. 12V External, non-regulated cooling Laser welding consumables, Lawitex starter package. As a manufacturer of laser welding wire, we can put together a custom wire selection tailored to your requirements; welding parameters will be explained and stored by us for easy access, customized to your needs. We supply original Alpha Laser spare parts, offer application/product training and services on highly favorable terms. We are an official distribution partner for Alpha Laser laser welding systems, and with nearly 30 years’ experience in the welding technology sector, we offer advanced laser welding technology from a single source. Enquiries, explanations, welding training and instruction (also available by telephone) in German, English, and Polish. Supplier: Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Stanje: novo, Leto izdelave: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load capacity per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115 autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low pressure gas alarm, gas pressure monitor and SW control Voltage stabilizer 48-72 KVA Enclosure to laser class 4 Heavy-duty machine base. High performance servo motors. Intelligent cutting control system, easy operation Fast piercing supported by segmented and step-by-step piercing technology Specialized oversized air channel ensures smooth smoke extraction. Fully enclosed design Conforms to European CE standards Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet loading 1500kg Dimensions 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Laedpfx Afjci Ik Sj Ssg Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (production + transport) Delivery to customer site: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The FILTERCUBE series is a cartridge filter extraction system for fume and dust filtration.

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Lasdpoi Ar Rusfx Af Ssg Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg

Stanje: zelo dobro (rabljeno), Laser Cutting Machine for Steel SUDA FC 1530 Material / Metal Laser Type / Fiber Laser Cutting Area / 1500 x 3000 mm Cutting Thickness / Depends on processed materials Laser Source Brand / RAYCUS RFL-C1000 Operation Mode / Continuous wave Configuration / 3-axis Supported Cutting Products / Sheet metal and tube Cooling / Air and liquid cooled with S&A CWFL-1000 chiller Cutting Speed / Depends on various materials Supported Graphic Formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / Yes Laser Head Brand / WSX Servo Motor Brand / Schneider Guideway Brand / THK Control System Brand / Cypcut Control System Operating System / CYPCUT system Power Supply / 1000W Laser Wavelength / 1080nm Working Size / 1500 x 3000 mm Positioning / Red dot indicator Height: 1,850 mm Width: 2,111 mm Length: 3,450 mm Lasdpovkf Rdofx Af Seg Weight (kg) / 2,500 kg This listing is for the SUDA FC 1530 steel laser cutting machine + S&A CWFL-1000 chiller. !The sheet metal straightener is listed separately!

Stanje: dober (rabljeno), Com J240/30 stroj za ovijanje na podstavku Lasdpszyz Dusfx Af Sjg Eden najbolj prepoznavnih proizvajalcev strojev za ovijanje na trgu, izdelan na Japonskem. Stroj deluje v ročnem ali avtomatskem načinu. Industrijska izvedba, primerna za težke obremenitve. Stroj je nameščen na samostojnem ogrodju s kolesi za transport. Deluje z jumbo rolami. Po vstavljanju materiala stroj ovije s trakom, stisne in zalepi, kar ustvarja eleganten paket. Idealno za pakiranje vizitk, letakov in drugih materialov. Tehnične specifikacije: Širina traku: 30 mm Učinkovitost: 26 ciklov/min Dimenzije ovitega izdelka: 240 x 150 mm Izdelano na Japonskem. Teža: 70 kg.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 375,1 kW (509,99 KM), konfiguracija osi: 4x4, gorivo: dizel, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, dodatne luči, parkirni grelec, spojka prikolice, From our range of new vehicles, we offer you: TLF 3000 All-wheel drive on an off-road MAN TGM 13.290 all-wheel chassis Ideally suited for small and medium-sized fire departments in rural areas, seeking a compact and robust vehicle to handle diverse tasks while requiring a large water reserve. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with same track width for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • 4 standard breathing apparatus holders in crew compartment Body: • Premium frame construction made of stainless, corrosion-resistant materials • Folding steps for each side equipment compartment • Custom stainless steel equipment mounts configured to your requirements • Walkable, anti-slip vehicle roof Vehicle pump/extinguishing agent tank: Lodpsxyunaofx Af Seag • Maintenance-free combined normal/high-pressure pump FPN 2000-10 • PUMP&ROLL capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating system in the pump compartment Firefighting equipment: • High-pressure rapid intervention system with 50 m rigid hose • Foam/water monitor with 2,000 l/min output mounted on roof • Self-protection system with 4 extinguishing nozzles in front of wheels Safety and lighting: • LED roof bar / 2 LED front flashers • Pneumatic Martin-Horn special signalling system • 100 W PA system with loudspeaker unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED lighting mast with remote control • Hygiene station on request We would be pleased to provide you with a detailed quotation and present the vehicle to you at our facility in Berlin. All details to the best of our knowledge and belief, without guarantee for completeness or accuracy. This listing does not constitute an offer but is for informational purposes only. Subject to prior sale!

Stanje: rabljeno, prosta razpetina: 2.705 mm, obremenitev na par nosilcev (maks.): 1.200 kg, Tehnični podatki za prečko za paletne police: Sistem polic: Arestant Tip: AS Vsebina dobave: 01x Prečka za paletne police, rabljena Barva materiala: oranžna Profil prečke: 80 x 40 mm Objemka: 4 HK (kavlji) Razdalja med objemkama: 2.705 mm Izvedba: Prečka za zgornji del maks. obremenitev na par prečk: 1.200 kg, pri enakomerno porazdeljeni obremenitvi. Lodpfxsz Aybdj Af Seag (Upoštevajte obremenitev na celotnem polju) 02x Varovalni zatiči, rabljeni Izvedba: popolnoma pocinkani Za varovanje vzdolžnih nosilcev pred nenamernim dvigovanjem Splošne informacije o izdelku: Ta izdelek je na voljo samo za prevzem. Morebiten dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih lahko povprašate posebej glede na kraj dostave oziroma obseg dostave.