Schuler Žlebni Udarec nakup rabljenega (89)

Stanje: rabljeno, Leto izdelave: 1989, Skupna stisna sila: 800 t Hod bata: 700 mm Nastavitev bata: 600 mm Godpoyl Tl Nsfx Aa Ueuc Vgradna višina (hod spodaj, nastavitev zgoraj): 1475 mm Razdalja med stebri L-D: 3700 mm Razdalja med stebri stransko: 2300 mm Miza - pritrditvena površina pribl.: 3600 x 2200 mm Bata - pritrditvena površina pribl.: 3500 x 2070 mm Vlečna blazina sila v mizi: 150 t Vlečna blazina hod: 250 mm Vlečna blazina površina: 2780 x 1570 mm Izmetalec v batu: 60 t Izmetalni hod v batu: 150 mm Število hodov na minuto: 7 - 21 min-1 Poraba energije: kW Višina nad tlemi pribl.: 9510 mm Teža stroja pribl.: 260 t Standardna oprema hidravlična prenapetostna zaščita 2 valja vlečne blazine

Stanje: rabljeno, Debelina pločevine 4,0 mm Premer valja cca 120 mm Iztegnitev 450 mm Teža stroja cca 0,48 t Guodpjy D A Eqofx Aa Usc Dimenzije cca 1,3 x 0,8 x 1,8 m

Stanje: novo, Leto izdelave: 2025, Tlak 315 t Gedpfx Aajxcp Ito Uouc Razmak med stojali 2800 mm Fiksni hod 35 mm Število hodov 100 - 250 hodov/min Vgradna višina (hod + zgornja nastavitev kladiva) 560 mm Stranski prehod med stojali 600 mm Površina mize 2700 x 1200 mm Prehodna odprtina v mizi 2450 x 450 mm Površina kladiva 2700 x 800 mm Teža 80,0 t Zahtevan prostor (ŠxGxV) 5,1 x 2,65 x 5,25 m

Stanje: novo, Leto izdelave: 2025, Tlak 315 t Razdalja med stebri 3800 mm Godpfoxcp Imox Aa Usuc Fiksni hod 35 mm Število hodov 100 - 250 hodov/min Vgradna višina (hod + zgornja nastavitev bata) 560 mm Stranski prehod med stebri 600 mm Površina mize 3700 x 1200 mm Prehodna odprtina v mizi 3400 x 450 mm Površina bata 3700 x 800 mm Teža 110,0 t Potrebni prostorski pogoji (ŠxGxV) 6,1 x 2,65 x 5,6 m

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08L/9030, Ponudbena številka: M08L/9030 Vrsta stroja: 5-matrica – 5-udarna stiskalnica Info: zaprto rezilo Znamka: SCHULER Tip: GB15-5 Letnik: 1988 Razpon premerov: 8–18 mm Število matric: 5 Gujdpfxoxgt N Nj Aa Ujc Število stopenj: 6 Dolžina stebla pod glavo: 120 mm Dolžina odseka: 140 mm Kapaciteta – kos/min: 60–170 Tlačna sila: 100 t Lokacija: Na naši zalogi

Stanje: rabljeno, Leto izdelave: 2010, Pressure: 600 t Column width: 3,640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1,550 mm Lateral column passage: 2,200 mm Table area: 3,600 x 2,500 mm Ram area: 3,600 x 2,500 mm Ram adjustment: 400 mm Strip width: 2,000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1,600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blank cutting line (press, coil line, blank stacking system) Year of manufacture: 1993 - 2010, new Siemens S7 control system - Press: Schuler EBS 4-600-3.6-350, with infinitely adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram balance, motorized ram adjustment, ram locking Sliding table (2x) without rails for the moving table - Decoiler: Schleicher HE-355-2100, year 1994, with auxiliary drive, pressure device, movable - Coil loading car - Strip pull-off device Schleicher - Scrap shear - Straightening machine: make Schnutz, type RME 18/50/13-2000 TZ, year 1994, with infinitely adjustable drive, 30 intermediate rolls, 117 support rolls Godevut Dyopfx Aa Ueuc - Loop bridge - Roll feed unit: make Schleicher, type WV-SYS-A 160-2000, year 1994 Blank stacking system / destacker: NSM Magnettechnik Dismantled and stored – video at the owner prior to dismantling available

Stanje: rabljeno, skupna višina: 5.100 mm, skupna širina: 2.600 mm, stiskalna sila: 65 t, For sale: toggle draw press by Schuler Model: PK No. 630 Gusdowab T Eepfx Aa Uoc

Leto izdelave: 1980, stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Guodpfsdlcy Hex Aa Uoc Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Gap between uprights: 450 mm Machine weight approx.: 6.2 t Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Stanje: rabljeno, Technical Details: Total Rated Force: 1,000 t Clamping Area (left-right): x mm Clamping Area (front-back): x mm Table Area: 4,500 x 2,400 mm Total Rated Force: Presses 2-3-4-5 – 1,000 t each Table Area: Presses 2-3-4-5 – 4,500 x 2,200 mm Last complete overhaul in 2021, consisting of: Blank Automation, Manufacturer: Neuhäuser, Type: 19711505-00, Year: 2000, SN 367080, Material No. FK35835, with integrated blank washing system by AMTEC, oiler, pallet loading/unloading station, pallet change trolley, control system by Siemens, system no. Blank gripper, system no. 0608300, mounted on press Double-column press (MK11165), Manufacturer: Weingarten, Type: ZS 1600.48, Year: 1965, Order no. 324/64, double action, press force approx. 1,000 t, stroke 900 mm, stroke adjustment 350 mm, distance between table surface and slide 2,150 mm, blankholder force 600 t, stroke 700 mm, adjustment 350 mm, clear height between table and blankholder 1,940 mm, max drawing depth 300 mm, strokes/min 12, column spacing approx. 5,000 mm, table size approx. 4,500 x 2,400 mm, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0608400, 0608500, blank turner and tilting station by ABB, movable, system no. Double-column press (MK11166), Manufacturer: Schuler, Type: P4E2 SQB 1000/4.5/0.7, single action, press force approx. 1,000 t, slide stroke 700 mm, slide adjustment 400 mm, strokes/min 14, distance between uprights 4,560 mm, table size 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, draw device 300 t, stroke 250 mm, system no. 0186200, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, system nos. 0608600, 0608700, with movable stacking and tilting table, system no. Double-column press (MK11167), Manufacturer: Schuler, Type: P4E2 SQB 1000/4.5/0.7, single action, press force 1,000 t, slide stroke 700 mm, upright spacing 4,560 mm, slide adjustment 400 mm, strokes/min 14, table area 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, system no. 0186300, control by Siemens, Type S7 Blank automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0608800, 0608900, with blank stacking and tilting table, system no. Gujdpfx Aajx Ag Azo Uec Double-column press (MK11168), Manufacturer: Schuler, Type: P4E2SQB 1000/4.5/0.7, single action, press force 1,000 t, slide stroke 700 mm, upright spacing 4,560 mm, slide adjustment 400 mm, strokes/min 14, table area 4,500 x 2,200 mm, slide area 4,500 x 2,200 mm, distance between table and slide surface 1,550 mm, system nos. 0186300, 0186400, control by Siemens, Type S7 Press automation, Manufacturer: ABB, consisting of: 2 blank grippers, mounted on press, system nos. 0609000, 0609100, with blank stacking and tilting table, system no. Double-column press, Manufacturer: Krup, Type: DPQV4-1000, SN 2602, Year: 1968, single action, press force 1,000 t, slide adjustment 400 mm, slide stroke 700 mm, strokes/min 14, distance between table and slide surface 1,550 mm, upright spacing 4,560 mm, table area 4,560 x 2,200 mm, slide area 4,560 x 2,200 mm, main drive 140 kW, Year: 1968, system no. 0186500.

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Pressing force: 160 kN, stroke rate: 200–1000/min, equipped with automatic handling/feeding and documentation. Guedspgycbopfx Aa Uec

Leto izdelave: 2002, stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Guedpfx Aajlp U D Tj Uoc Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Leto izdelave: 1970, stanje: rabljeno, Pressure: 63 t Throat depth: 440 mm Stroke: 8–100 mm Strokes per minute: 65 Ram adjustment: 63 mm Table surface: 720 x 750 mm Ram surface: 440 x 280 mm Pass-through hole in table: Ø 240 mm Table height: 830 mm Bore in ram: Ø 40 mm Machine weight approx.: 5.0 t Pneumatic clutch-brake combination Centralized grease lubrication Mechanical overload protection Manual stroke adjustment Manual ram adjustment Guodpfxolp U Eqs Aa Uec Two-hand operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Širina materiala 650 mm Teža koluta 15 t Debelina materiala 16 mm Leto izdelave je ocenjeno, Naprava je bila le poskusno v obratovanju Gedpfx Aaex Ny A Rj Uouc

Stanje: dober (rabljeno), Schuler PE4s 50/800 hitrotlačna stiskalnica Proizvajalec: Schuler Tip: PE4s 50/800 Hitrotlačna stiskalnica 61/21 600/3 Gujdpjgryc Nefx Aa Ujc Tlačna sila: 50 t Izsev: 800 mm Število hodov/min: 125-300 Hod bata: 40 mm Kohler navijalni razvijalec 500.1 M Dokumentacija je na voljo po nakupu Prodajamo večje število paternosterjev. Poleg približno 50 paternosterjev je na voljo še nešteto drugih strojev. Po nakupu je znesek zapade v plačilo v 7 delovnih dneh. Oglejte si tudi naše druge ponudbe. Veliko užitka pri brskanju in nakupovanju. Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Dodatni artikli – novi in rabljeni – so na voljo v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), End mills, shank cutters, milling cutters - Four-flute - Roughing end mill - Diameter: 16 mm - Usable length: 20 mm - Type: HSSE Gujdpsb A Srusfx Aa Usc - Quantity: 17 pieces - Sale: only as a complete lot - Weight: 4 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1969, številka stroja/vozila: 70-10 6840, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 500 t, hod: 850 mm, širina mize: 2.750 mm, dolžina mize: 1.500 mm, tabela razdalj do bata: 1.000 mm, overhauled eccentric press incl. robot and die cart TECHNICAL DETAILS Pressing force: 500 t Stroke: 850 mm Strokes per minute: 12–24 spm Stroke adjustment: 325 mm Gusdpfxowcn H Re Aa Ujc Upright distance: 3250 mm Table size: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance table to ram: 1000 mm Pneumatic drawing device in table Force at 6 bar: 140 t Stroke: 250 mm Ejector in ram Force at 6 bar: 46 t Stroke: 150 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: H/7529, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 32.769 h, stiskalna sila: 500 t, hod: 800 mm, širina mize: 2.400 mm, dolžina mize: 1.300 mm, TECHNICAL DETAILS Pressing Force: 500 t Table Area: 2,400 x 1,300 mm Ram Area: 2,400 x 1,300 mm Stroke: 800 mm Max. Stroke Length: 830 mm Control System: Siemens S7-400 Godpfxewa S R Is Aa Usuc Installation Height: 400 mm/min Working Speed: 25 - 60 mm/s Closing Speed: 500 mm/s Rapid Traverse Upwards: 450 mm/s Tool Base Area: min. 1,400 x 900 mm Tool Base Area: max. 2,300 x 1,200 mm Tool Weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power: 255 kW Rated Current: 435 A Voltage: 400 V Frequency: 50 Hz Hydraulic Pressure: 255 bar Oil Capacity: 3,700 l

Leto izdelave: 1990, stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Gjdpfx Aajhcnxre Ueuc Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), številka stroja/vozila: 458/08 (C.2.144.1301/02), Maximum format: B1 Gusdefh Dp Tspfx Aa Uoc Voltage: 100–240V // 300–330VA // 50/60Hz Further MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available from our stock. ON REQUEST.

Stanje: potreben popravila (rabljeno), Machine number: 63882 Type / Model: 8LES Pressing force: 22 t Table: 900 x 450 mm Guedpfx Ajgd R Sgea Ujc Ram width: 350 mm Installation height without / with support plate: mm Stroke: 8 to 150 mm Condition: Disassembled, must be assembled, not tested The machine had a broken cylinder mount. A replacement part was manufactured – see also images. Price as-is, price after assembly upon request.

Leto izdelave: 1995, stanje: dober (rabljeno), multifunctional punching machine, punch, hole-punch, pneumatic hole punch - operation: pneumatic Guodpfxsb A Nc He Aa Usc - year of manufacture: 1995

Leto izdelave: 2004, stanje: dober (rabljeno), EUROTRON IND-XR 500 turret punch, year of manufacture 2004, serial number S1-2004-1, featuring adjustable X and Y axes; please refer to the test result photo. The machine is in good condition and available immediately. Gsdpjh H Iu Tefx Aa Uouc If you are interested, we would be pleased to inform you about other machines available in our facility as well. You are welcome to inspect the machine at our premises by appointment.

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Godpfx Aajvz Hyhj Uouc Sprossen Punch NLF-12-26 Manual Foot-Operated Sprossen Punch Morsö NF is a foot-operated punching machine for cutting window mullions, cabinet doors, kitchen cabinets, etc. The Morsö NF guarantees a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is incrementally adjustable. Left and right stops with adjustable end stops ensure precise operation. The favorable lever-ratio of the foot pedal allows for very easy operation. Dual springs return the blades to the starting position automatically. Compared to a milling machine, the following points should be considered with the Morsö NF: – No dust – No noise – No compressor required - The Morsö NF guarantees a smoother and consistently more precise cut - The Morsö NF produces no dust, eliminating the need for an extraction system - Changing blades takes less than 15 minutes - Setup and adjustment of stops - Even as the blades wear, the 45° angle remains unchanged, constantly ensuring precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Left and right stop: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Scrap chute - 6 end stops - Stops on the left and right side of the machine - 1 neck blade (size of your choice) - 1 pair of side blades

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Notcher NSF-6-20 Manual Foot-Operated Sprossen Notcher Morsö NF is a foot-operated sprossen notcher designed for cutting window mullions, cabinet doors, kitchen cabinets, etc. Morsö NF ensures a mirror-smooth and precise cut, allowing workpieces to be assembled without further processing. The horizontal movement of the knife head is continuously adjustable. Stops, left and right, with adjustable end stops, guarantee precise work. The favourable lever transmission of the foot pedal allows extremely easy operation. Double springs return the knives to their starting position. When comparing the Morsö NF with a milling machine, please note the following advantages: – No dust – No noise – No compressor required - The Morsö NF delivers an even smoother and more precise cut - The Morsö NF produces no dust and therefore does not require an extraction system - Blade change on the Morsö NF takes less than 15 minutes - Set-up and adjustment of stops - As the knives wear down, the 45° angle remains unchanged, guaranteeing consistently precise joints - The Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm Guodpfx Asvz Hynsa Uoc - Maximum working width: 70 mm - Maximum working height: 160 mm - Stops, left and right: 1,500 mm - Extension tables, left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Waste chute - 6 end stops - Stops on the left and right sides of the machine - 1 neck knife (size of your choice) - 1 pair of side knives

Leto izdelave: 2014, stanje: rabljeno, Maks. izsekalna sila: 50 kN Sprožitev hoda preko nožnega stikala Guodpfowb Eucjx Aa Uec Dobro stanje