Rausch Rs 3/1000 nakup rabljenega (73.221)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling Bjdpfx Aaow Ighis Dswp - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: rabljeno, Največja širina materiala: 700 mm Sposobnost krožnega upogibanja pri konstrukcijskem jeklu maks. 1 mm Bwjdpfxozh N T Ts Aa Dsp Sposobnost rezanja pri konstrukcijskem jeklu maks. 1 mm Sposobnost rezanja pri aluminiju maks. 1 mm Sposobnost rezanja pri nerjavnem jeklu maks. 0,5 mm Sposobnost upogibanja pri konstrukcijskem jeklu maks. 1 mm Sposobnost upogibanja pri aluminiju maks. 1,5 mm Teža stroja pribl. 150 kg Dimenzije: 1200 x 400 x 1200 mm 3 v 1 UNIVERZALNI STROJ ZA OBDELAVO PLOČEVINE za krožno upogibanje, upogibanje in rezanje tankih pločevin

Stanje: rabljeno, Leto izdelave: 2017, proizvajalec krmilnikov: Siemens, model krmilnika: 840 Dsl, Opis: Splošno: Letnik izdelave: 2017 Krmiljenje: Siemens 840 Dsl Višina konic: 180 mm Razdalja med konicama: 1.000 mm Največja masa obdelovanca: 150 kg Os X: Tehnologija: Elektromehanska z krogličnim vretenom (KGT) Prečna hitrost: 0,001 - 8.000 mm/min Merilni sistem: Neposreden, 0,0005 mm (steklena letev) Vodilo: Hidrostatično Os Z: Tehnologija: Elektromehanska z krogličnim vretenom (KGT) Hitrost pomika mize: 0,01 - 12.000 mm/min Merilni sistem: Neposreden, 0,0005 mm (steklena letev) Os B: Tehnologija: Kontinuirno vrtljiva os Ločljivost: 0,001° Zatezanje: Hidropnevmatsko Vreteno za obdelovanec: Moč: 2,0 kW Število vrtljajev: 0 - 600 min⁻¹ Vpenjalni stožec: MK 5 in KK 5 C-os: 0,001° Brusilno vreteno: Razporeditev kolutov: levo/desno Moč: 9 kW Število vrtljajev: 1.400 min⁻¹ Notranja brusilna enota: Moč: 2,2 kW Število vrtljajev: 60.000 min⁻¹ Konjiček: Hod pinole: 40 mm Vpenjalni stožec: MK 4 Umik pinole: Hidravlični Precizna nastavitev cilindrov: Da Oprema / dodatki: Bwsdpfx Aaszhdybo Dsp Hladilni sistem: KSS-naprava s filtrom Ločevalnik emulzijskega megla: Mehanski Prirezovalnik brusnih kolutov: Diamantna obložena ploščica Tehnološka opcija I: Brušenje konusov Tehnološka opcija II: Neokroglo brušenje Sistem za uravnoteženje: Avtomatski Sistem za zaznavo kontakta: Senzor vibracij Merilnik obdelovancev: Dolžinski merilni tipalo Dodatki: Različni prirobnice, koluti in trni

Stanje: zelo dobro (rabljeno), Hertz energy-saving boiler 50 kW Bsdjq I Nfhjpfx Aa Dowp

Stanje: novo, ALTENDORF F 35 Model 3 - 1000 Format Circular Saw 5.5 kW (7.5 HP), 3 speeds, Bwsdpfx Aaownr Ehs Dop Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC-controlled parallel fence, cutting width 1,000 mm, Angle and mitre fence 3,450 mm, without length compensation, Table extension/table widening, With high-quality CDF surface ----- Technical Specifications ----- Swivel range: 0 - 46 °, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction port Ø: 80 + 120 mm

Stanje: novo, Formatna krožna žaga ALTENDORF F 35 Tip 3 - 1000 -razstavni stroj- 5,5 kW (7,5 KM), 3 hitrosti, Motorno nastavljanje višine in nagiba, Velik zaščitni pokrov, Dvojni voziček 3.200 mm, Predrezalna enota z LED osvetlitvijo, CNC vzporedno vodilo, širina reza 1.000 mm, Kotno-poševni prislon 3.450 mm, brez dolžinskega izravnave, Podaljšanje/razširitev mize, Bwsdsw Imptepfx Aa Djp S kakovostno površino CDF ----- Tehnični podatki ----- Obseg vrtenja: 0 - 46 °, Dolžina vozička: 3.200 mm, Dolžina reza: 3.100 mm, Širina reza: 1.000 mm, Višina reza: 154 mm, max. Ø žaginega lista: 450 mm, Moč motorja: 5,5 kW, Velikost zaslona: 15 palcev, Višina delovne mize: 910 mm, Premer sesalne šobe: 80 + 120 mm - nov razstavni stroj -

Stanje: rabljeno, Leto izdelave: 1983, Table diameter: 1000 mm Workpiece height: 25 mm Number of discs: 1 Bwedpfx Aot Hw H Sja Dsp Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Lapping machine for special injection components with dresser and workpiece ring

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 20225, Color: green Slightly used! DIN 1415 Bwsdpfx Aajbrcmfe Dop Electromechanical drive

Stanje: dober (rabljeno), Leto izdelave: 1998, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 550 mm, pomik po osi Z: 510 mm, skupna dolžina: 1.150 mm, skupna širina: 510 mm, X-axis travel: 1020 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Table length: 1150 mm Table width: 510 mm X-axis feed rate: 15,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 15,000 mm/min Tool holder: 40 ISO/BT/MK Bodpfxswvhvfs Aa Dowp Spindle power: 30 kW Spindle speed: 15,000 rpm Tool changer: 30 positions Chip conveyor: yes Length: 2,800 mm Width: 2,500 mm Height: 2,800 mm Weight: 6,800 kg

Stanje: novo, Leto izdelave: 2025, ALTENDORF F 35 Typ 3 - 1000 formátová pila s předřezem 7,5 kW (10 HP), 3 otáčky, Motorické nastavení výšky a naklápění, Velký bezpečnostní kryt, Dvojitý pojízdný vozík 3 200 mm, Předřezová jednotka s LED osvětlením, CNC podélný doraz, šířka řezu 1 000 mm, Digitální úhlový/mitrový doraz (Digit-L), Prodloužení/rozšíření stolu, S osvědčeným povrchem CDF ----- Technické údaje ----- Rozsah naklápění: 0 - 46 °, Délka vozíku: 3 200 mm, Max. délka řezu: 3 100 mm, Max. šířka řezu: 1 000 mm, Max. výška řezu: 154 mm, Max. průměr pilového kotouče: 450 mm, Výkon motoru: 7,5 kW, Velikost obrazovky: 15 palců, Výška pracovního stolu: 910 mm, Průměr odsávacího hrdla: 80 + 120 mm Vybavení: Altendorf F 35 Typ: III - 1000 7,5 kW (10 HP), 3 otáčky (M51064) Digitální úhlový/mitrový doraz Digit L - volitelně (M44154) Místo: skladem 54634 Bitburg - ihned k dispozici - Bwodsxyl Ecepfx Aa Dop

Stanje: novo, barva: rumena, skupna masa: 975 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, širina izkopne žlice: 340 mm, Leto izdelave: 2023, Oprema: dodatne luči, GG JAPAN 1000 Gunter Grossmann & Kubota The latest model and highest quality of the JAPAN 1000. The JAPAN 1000 is a premium machine designed for demanding construction, electrical, and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON travel motors 3. American EATON slewing motor 4. Two speed travel 5. Adjustable crawler undercarriage 6. Pro Articulated Boom 7. Concealed travel motors 8. Hidden hydraulic hoses 9. Modern design construction 10. The machine meets the latest EURO 5 emission standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Robust rubber tracks for a comfortable ride 14. Two travel speeds We stock all spare parts for our brand’s machines across Europe. Price 11,990 EUR (excl. VAT) (Includes: GG1700 excavator bucket 380 mm) SPECIFICATIONS Model: JAPAN 1000 Brand: Gunter Grossmann Operating weight: 1,020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm Engine: JAPAN - KUBOTA Bodeh Uymyopfx Aa Dewp Rated power: 11.8 kW / 2,300 rpm Main pump: Parker Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Boom: Side shift Travel speed: Two speeds Drive motors: Concealed Hoses in the arm: Concealed DIMENSIONS Overall dimensions (LxWxH): 2,770 x 896 x 1,490 mm Wheelbase: 770 mm Total track length: 960 mm WORKING RANGE Max. digging depth: 1,650 mm Max. digging height: 2,610 mm Max. digging radius at ground level: 2,890 mm Slewing radius: 360° Max. lift height of bulldozer blade: 345 mm Max. digging depth of bulldozer blade: 255 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Prodajam ta stružnica. Generalna obnova leta 2009 Premer struženja nad ležiščem: 1.000 mm Bwsdpfx Aoxxvqaja Dep Dolžina struženja: 5.000 mm Siemens Sinumerik 840D Na stroju se zaključuje naročilo. Na voljo konec januarja 2026.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.000 mm, Pršilni avtomat Proizvajalec: Leif Lorentz Tip: B3 Primeren za vodne lake in izdelke na vodni osnovi Delovna širina: 1000 mm Prehodna višina: cca 110 mm Pripravljen za 1 črpalko in 5 pršilnih pištol Napredovanje nastavljivo, transport obdelovanca preko transportnega traku (transportni trakovi obnovljeni!) Z integriranim sistemom za vračanje laka: lak, lazura ali olje se zbirajo in jih je možno ponovno uporabiti Integriran filtrirni sistem Bwsdsxmrdxepfx Aa Djp Stroj je trenutno v fazi čiščenja in tehničnega pregleda. Prodaja bo potekala v delujočem stanju. Dobavni rok: cca 3 tedne

Stanje: rabljeno, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized back gauge up to 1000 mm, with fine adjustment via handwheel Shear angle adjustment Blades sharpened Operating manual Bwedpeqmvlrsfx Aa Djp Weight: approx. 1400 kg

Stanje: rabljeno, prevoženi kilometri: 238.132 km, moč: 140 kW (190,35 KM), prva registracija: 03/2019, vrsta goriva: dizel, lastna masa: 5.309 kg, največja dovoljena obremenitev: 2.181 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 4.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 3, dolžina tovornega prostora: 5.180 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.200 mm, Oprema: ABS, centralno zaklepanje, dodatne luči, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, kabina, klimatska naprava, meglenke, nadzor oprijema, parkirni senzorji, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, spojler, tempomat, zapora diferenciala, * German vehicle * From second owner * Genuine mileage: only 238,132 km * Condition: see photos * DHOLLANDIA tail lift, type: DHLM.10 * Lifting capacity: 1,000 kg * SAXXAS box body * Box dimensions: L=6,000 x W=2,400 x H=2,200 mm * Wired remote control * Two rows of lashing rails on right & left * Anti-slip plywood floor * Trailer hitch * Trailer load: 11,265 kg * Driver’s cab with 3 seats * Air conditioning * Cruise control * Lane departure warning system * 6-speed manual transmission * Differential lock * Multifunction steering wheel * ABS/ASR/ESP * Engine brake * Reversing camera * Comfort driver’s seat, air-suspended * Power windows * Electrically adjustable, heated mirrors * Radio, Bluetooth, telephone * Leaf/air suspension with lift & lower function * Roof spoiler * Sun visor * Wheelbase: 4,200 mm * GVW: 7,490 kg * Unladen weight: 5,309 kg * Payload: 2,181 kg If a new TÜV inspection is desired, we would be happy to offer you a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), without new accident prevention check (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods in order to avoid misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors. - Bwjdpfx Ajyzhkasa Djp

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, 1 x Riggs Autopack Ltd dozirna naprava na mobilnem stojalu s pnevmatskim nožnim pedalom. Zelo malo rabljena – MANJ KOT 20 UR DELOVANJA. Primerna za različne vroče ali hladne izdelke, tekoče ali poltekoče, vključno z omakami, chutneyji, marmeladami itd. Model – 1000 Series 3. Serijska številka – TT2365. Bwjdpfswpunbjx Aa Dep Dozirni razpon – 200 ml do 2500 ml (batni in cilinderski komplet). Polnilna šoba – premer 25 mm.

Stanje: rabljeno, prevoženi kilometri: 277.165 km, moč: 140 kW (190,35 KM), prva registracija: 03/2019, vrsta goriva: dizel, lastna masa: 5.309 kg, največja dovoljena obremenitev: 2.181 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 4.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 3, dolžina tovornega prostora: 5.180 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.200 mm, Oprema: ABS, centralno zaklepanje, dodatne luči, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, kabina, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, spojler, tempomat, zapora diferenciala, * German vehicle * Second owner * Only 273,813 km original mileage * Condition as per photos * DHOLLANDIA tail lift, type: DHLM.10 * Lifting capacity: 1,000 kg * SAXXAS box body * Box dimensions: L=5,180 x W=2,400 x H=2,200 mm * Two rows of lashing rails, right & left * Wired remote control * Phenolic resin-coated anti-slip floor * Trailer coupling Bwedpfjyziwuex Aa Dop * Permissible trailer load: 11,265 kg * Cab with 3 seats * Cruise control * Multifunction steering wheel * Air conditioning * Lane departure warning system * 6-speed manual transmission * ABS/ASR/ESP * Engine brake * Driver’s comfort seat, air-suspended * Electric windows * Electrically adjustable, heated mirrors * Radio, Bluetooth, telephone * Leaf/air suspension, with raise/lower function * Roof spoiler * Sun visor * Wheelbase: 4,200 mm * Perm. total weight (GVW): 7,490 kg * Unladen weight: 5,309 kg * Payload: 2,181 kg If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP, or UVV certificates. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or incorrect information in the offer. Buyers are obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, pomik vretena: 300 mm, število vreten: 3, skupna masa: 9.000 kg, Drilling machine for steel structures – drilling steel profiles. Manufacturer: PEDDINGHAUS, Germany Model: TDK 1000/3 Year of manufacture: 1992 Number of drilling spindles: 3 units (two horizontal, one vertical) Bwsdpfxepl Dyce Aa Dep Drilling diameter in S355 steel: 8 to 40 mm Drill type: High-speed steel (HSS) Drill spindle mounting: Morse taper 4 Drill cooling: Through spindle and internal drill channels Spindle feed: Hydraulic with adjustable feed force Spindle stroke: max. 300 mm Material feed and length measurement: roller conveyor CNC control: SIEMENS Sinumerik 840 Software: CIM Steel Production capabilities: • Drilling I-beams: INP: 80–600 mm, IPE: 80–600 mm, IPB: 100–1,000 mm, IPBL: 100–1,000 mm, IPBV: 100–1,000 mm • Drilling channels: UWP: 50 x 25 – 400 mm • Drilling equal angle bars: 80 x 8 mm – 200 x 24 mm • Drilling unequal angle bars: 80 x 65 x 8 mm – 250 x 90 x 16 mm • Drilling flat bars: min 15 mm Power consumption: 35 kW Original paint – the machine has not been repainted Weight: 9,000 kg CE certification: Not available The machine is connected to power supply and ready for inspection.

Stanje: dober (rabljeno), CORIMPEX STROJ ZA VARJENJE NOSILCEV TIP BWM TC 2000-1000 3-15. PAS : Višina 200 - 2000 mm (vključno s prirubnicama). Debelina 5 - 25 mm PRIRUBNICA : Širina 150 - 1000 mm Debelina 8 - 40 mm Maks. debelina po preoblikovanju = 35 mm pri širini prirubnice 1000 mm Bwodpfx Aozc Rl Uoa Dsp MAKS. TEŽA NOSILCA: 1000 kg / meter MIN. DOLŽINA NOSILCA: 3000 mm MAKS. DOLŽINA NOSILCA: 15.000 mm. HIDRAVLIČNI CILINDER: 1800 mm. TOČKOVNO VARJENJE: Ni potrebno. POGANJANI VALJI V: hitrost = 12 m/min. VNOSNI/IZHODNI TRANSPORTNI TRAKOVI OBREMENITEV BATA: 6/9 ton. RAZPON HITROSTI POMIKA: 0,2 - 2,1 m/min POSTOPEK VARJENJA: Tandemsko podprašno varjenje.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment Bwsdsuwv H Hepfx Aa Dsp - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Bsdpouxfucofx Aa Dowp Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Generalno obnovljeno leta 2013 Ojačano glavno vreteno obdelovanca B-os brezstopenjsko nastavljiva Kontra-vreteno Bwjdpfxoxyadae Aa Dop Brez vpenjalne glave in brez lunete na fotografiji Krmiljenje Kelco 90 Stroj je možno pri stranki v obratovanju ogledati do vključno januarja 2026.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 320 mm, pomik po osi Z: 1.150 mm, proizvajalec krmilnikov: HEIDENHAIN, skupna masa: 6.000 kg, Ta brusilni stroj KELLENBERGER KEL VARIA RS 175/1000 je bil izdelan leta 2004 v Švici. Opremljen je z upravljalnikom HEIDENHAIN. Prednosti stroja Bwodpfx Aoyi Elisa Dop Kvalitativne prednosti stroja • Dobro stanje Tehnične prednosti stroja • Razdalja med konicama: 1000 mm • Višina konice: 175 mm • Dimenzije desnega brusnega koluta Ø 400 x 50 mm • Pomiki glave brusnega koluta -210°/+30° • Hitrost vrtenja: 8-800 min⁻¹ • Tip vretena: CM5

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 6172025, Pallet hoist with tray / Pile hoist - Stack Lift Polar L-1000-W-3 Year of manufacture: 1991 - Serial No.: 6172025 Bodpfx Aaen Aw Ugs Dewp Format / Maximum size: 1100 x 750 mm Lifting capacity: max. 1000 kg Lifting height: max. 1400 mm Online video inspection via Skype video available. We would be delighted to welcome you for an on-site visit – more machines in stock. Immediately available – Can be inspected Located in Emskirchen / Nuremberg – Can be tested on site.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, Model/Tip: Erdwich M480/3-1000 Št. številka: 1896 Leto izdelave: 2008 Obratovalne ure: neznano Garancija: Delno delujoč; brez garancije ali jamstva Bwodpfxeylhbfj Aa Dop Razpoložljivost: približno 4–8 tednov po prejemu pologa Podrobnosti: + Rezalna enota, lijak, okvir in krmilna enota + 3-gredni drobilnik + 2x 22kW pogon + Transporter za ostružke