Preklopni Tisk - En Stolpec nakup rabljenega (21.287)

Stanje: zelo dobro (rabljeno), Pressure 125 t Throat depth 400 mm Stroke 6 - 125 mm Ram adjustment 100 mm Installation height (stroke bottom, ram adjustment top) 400 mm Cjdpfxjt Eix Rj Aahsrg Table area 1100 x 750 mm Strokes per minute 60 spm Total power requirement 16 kW Machine weight approx. 10 t Required space approx. WxDxH 1.1 x 1.9 x 3.53 m - Machine partially overhauled - Completely disassembled and technically inspected, - New seals - New pneumatic clutch - New seals in the compensating cylinder - New drive motor - New ball screw - New paint finish - Current UVV inspection and brake time measurement Machine safe for manual loading operations At extra cost, we can equip the machine as follows: - Workspace protection with light curtain / cycle operation, but only in combination with a new control cabinet (freestanding) with ABB safety controller and touch panel - Two-hand operation on a separate stand

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller Cjdpfxecp Apys Aahsrg - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Stanje: rabljeno, Pressure 80 t Outreach 320 mm Stroke 8 - 112 mm Table size 830 x 600 mm Strokes per minute 30 - 85 Ram surface 650 x 400 mm Ram adjustment 71 mm Clamping plate 990 x 550 mm Table height above floor level 810 mm Table height above ground 800 mm Frame clearance (front) 680 mm Frame clearance (rear) 520 mm Total power requirement 7.5 kW Machine weight approx. 7.7 t Space requirement approx. 1.5 x 2.2 x 3.15 m Equipment: - with feed rollers - fixed table Machine has been/is being partially overhauled: - Complete disassembly and inspection - Table and ram surfaces re-milled - New seals and hydraulic hoses - New main motor - Both main bearing bushings, third bearing bushing, and connecting rod bushing replaced - Shaft machined and newly bushed - Repainting - New control cabinet with PLC and touchscreen wiring - Current UVV inspection with brake time measurement Cjdpfx Aastqm Dmjhjrg

Leto izdelave: 1990, stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. Cjdpsd Nl E Usfx Aahjrg - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: rabljeno, Tlak 45 t Izteg 230 mm Hod 10 - 140 mm Število hodov 80 hodov/min Nastavitev bata 55 mm Skupna potrebna moč 3,0 kW Teža stroja cca 2,7 t - hidravlična sklopka - nastavljiva miza - prenos z zobniki Credpfx Ajykb Ddsahsg

Stanje: rabljeno, Pritisk 25 t Izteg 250 mm Hod 10 - 120 mm Število hodov 120 hodov/min Nastavitev batnice 45 mm Skupna potrebna moč 1,5 kW Teža stroja pribl. 1,95 t - hidravlična sklopka - nastavljiva miza Crsdpfxsykb A Ts Aahsg

Stanje: rabljeno, Tlak 35 t Doseg 300 mm Hod 10 - 120 mm Število hodov 110 hodov/min Nastavitev batnice 50 mm Codpjykb D Rjfx Aahsrg Skupna potrebna moč 3 KM - nastavljiva miza

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced Cedpfetrhf Aex Aahjrg - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Leto izdelave: 1990, stanje: rabljeno, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Distance table/ram, stroke down: 400 mm Ram bore: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Stroke rate: 55 strokes/min Total power requirement: 5.5 kW Machine weight approx. 4 t Space requirement approx. 0.83 x 1.7 x 2.6 m - Ram counterbalance Crjdpfxjfn Aqnj Aahsg The machine is scheduled to be partially overhauled in our facility next year (dismantling, inspection, new painting, new wiring, new control cabinet).

Stanje: rabljeno, Leto izdelave: 1999, hidravličen da pritisna sila 100 t teža stroja cca 2,9 t Cjdex U A Tvspfx Aahjrg

Leto izdelave: 1980, stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Gap between uprights: 450 mm Machine weight approx.: 6.2 t Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: Cedpfx Aajdlcy Hoherg * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 100 t Throat depth: 315 mm Stroke: 8 - 112 mm Table clamping surface: 725 x 570 mm Ram surface: 410 x 315 mm Ram adjustment: 80 mm Strokes per minute: 55 / 82 Hole in the ram (depth x diameter): 85 x 50 mm Installation height: 355 mm Total power requirement: 7.5 kW Codpfeugnpijx Aaherg Machine weight approx. 6 t Machine dimensions (L x W x H): 2.00 x 1.00 x 2.87 m

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets Credpfx Ajvbk Rwjahjg - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Stanje: rabljeno, Leto izdelave: 2004, Tlak 25 t Iztek 375 mm Hod 80 mm Število hodov 120 hodov/min Codpfx Aeykb D Dsaherg Nastavitev bata 45 mm Skupna potrebna moč 3,5 kW Teža stroja cca 2,8 t - hidravlična sklopka - fiksna miza

Stanje: rabljeno, Leto izdelave: 1961, Pressure: 25 t Crjdpetqqxbjfx Aahjg Throat depth: 200 mm Stroke: 4 - 80 mm Table clamping surface: 595 x 410 mm Ram adjustment: 70 mm Strokes per minute: 150 spm Table height adjustment: 240 mm Total power requirement: 1.1 kW Machine weight approx.: 1.45 t Machine dimensions (L x W x H): 1.30 x 0.80 x 2.0 m

Stanje: rabljeno, Leto izdelave: 1961, Tlak 63 t Izteg 280 mm Hod 8 - 100 mm Število hodov 65 /min Razdalja miza/tolčnik, večji hod zgoraj, nastavljivo zgoraj 415 mm Površina mize 620 x 500 mm Prehodna odprtina v mizi 230 mm Višina mize nad tlemi 800 mm Površina tolčnika 310 x 255 mm Nastavitev tolčnika 63 mm Cjdpfx Aszrprdeaherg Pogonska moč 5,5 kW Teža 3,95 t Potrebni prostor (ŠxDxV) 1,2 x 1,8 x 2,4 m Z motorjem, trenjsko sklopko, mehanskim varovalom proti preobremenitvi v tolčniku, ročnim nastavljanjem hoda, ročnim nastavljanjem tolčnika, fiksno mizo, ročnim centralnim mazanjem, dvoročnim in nožnim upravljanjem.

Stanje: rabljeno, Leto izdelave: 2008, Pritisk 40 t Izvlek 230 mm Hod 4-100 mm Delovna površina mize 650x450 mm Crodpfx Aasy I Ddvshog Delovna površina bata 420x220 mm Nastavitev bata 85 mm Prehodna odprtina v mizi 170x220 mm Višina mize 800 mm Število hodov 60 hodov/min Vgradna višina 375 mm Dimenzije (VxŠxG) 2800x1200x1900 mm Teža stroja ca. 3,2 t Serijska številka: 54579 Centralno mazanje Mehanska lomna plošča v batu Nastavljiva miza Hidravlična sklopka-zavorna kombinacija Poseben krmilni omarica Dvoročno upravljanje Nožno stikalo Odobreno za ročno polaganje

Stanje: rabljeno, Leto izdelave: 1991, Press force / t Sheet thickness / mm Stroke rate / strokes/min Crjdewgi S Nopfx Aahsg Condition: used The punching machine operates perfectly. A demonstration video is available.

Leto izdelave: 1959, stanje: rabljeno, Pressure: 65 t Cedpfxelp U E He Aahorg Outreach: 370 mm Stroke: 29–151 mm Strokes per minute: 50 Ram adjustment: 80 mm Table area: 1300 x 700 mm Ram area: 1000 x 600 mm Table through-hole: 110 mm Table height: 800 mm Ram bore diameter: 40 mm Machine weight: approx. 6 t Space requirement (WxDxH): approx. 1700 x 2000 x 2800 mm Two-hand operation Foot operation Pneumatic clutch-brake combination Ram weight compensation

Stanje: rabljeno, Pritisk 150 t Dimenzije mize 1000 x 630 mm Napetost 400 V Nagibna mehanska stiskalnica z posodobljeno elektriko (CE2004) in vmesnimi ploščami. Tehnični podatki so podatki proizvajalca oziroma uporabnika in zato za nas niso zavezujoči. Vmesna prodaja pridržana; veljajo izključno naši Csdpfxsyqv Ahs Aahorg poslovni pogoji. O nas več kot 400 lastnih strojev na zalogi globoko 15.000 m² skladiščne površine, mostna dvigalka kapacitete 70 t več kot 10.000 artiklov dodatkov za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: rabljeno, Tlak 150 t Dimenzije mize 1000 x 360 mm Napetost 400 V Nagibni mehanski tisk z posodobljeno električno opremo (CE2004) in podložnimi ploščami. Tehnični podatki so podatki proizvajalca ali upravljavca in zanje ne prevzemamo odgovornosti. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, žerjav z zmogljivostjo 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoj obrat, nas kontaktirajte. Crsdpfx Aaeyuqdhshjg Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: rabljeno, Leto izdelave: 2002, Tlak 80 t Iztek 300 mm Credpfx Aaoy I Dd Nshjg Hod 8-110 mm Število hodov 100 hod/min Nastavitev batnice 75 mm Površina mize 750x590 mm Površina batnice 540x400 mm Prehodna odprtina v mizi 200x200 mm Višina mize 780 mm Oznanina v batnici Ø 40 mm Skupna potrebna moč 11 kW Teža stroja cca 5,5 t Prostorske zahteve cca D׊×V 1200x1700x2700 mm Hidravlična kombinacija sklopke in zavore, pnevmatsko upravljana Centralno mazanje z mastjo Polavtomatska nastavitev hoda Hidravlično prenapetostno varovanje Motorizirana nastavitev batnice Izravnalni valj batnice Prednji nasprotni ležaj

Stanje: rabljeno, Leto izdelave: 1996, Pritisk 45 t Izvlek 230 mm Hod 0 - 160 mm Csdpfsykb Dwox Aahjrg Število hodov 120 hodov/min Nastavitev berana 55 mm Skupna potrebna moč 3,0 kW Teža stroja pribl. 2,95 t - hidravlična sklopka - nastavljiva miza

Leto izdelave: 1977, stanje: rabljeno, Pressure: 40 t Outreach: - mm Stroke: 8 - 90 mm Table dimensions: 630 x 430 mm Ram adjustment: 60 mm Maximum stroke rate: 65 strokes/min Total power requirement: kW Machine weight approx.: 2,480 kg Space requirement approx.: m - Gear drive - Tiltable - Table clamping plate Crjdpsb U Hxfsfx Aahsg - Mechanical overload protection in the ram (shear plate) - Pneumatic clutch

Stanje: rabljeno, Leto izdelave: 1991, Pritisk 60 t Razpon 280 mm Hod 10 - 90 mm Nastavitev bata 60 mm Število hodov 110 hodov/min Površina mize 740 x 550 mm Pritrdilna plošča 740 x 555 mm Površina bata 380 x 200 mm Višina vgradnje pri največjem hodu zgoraj in nastavitvi bata zgoraj 360 mm Skupna potrebna moč 4 kW Teža stroja pribl. 3850 kg Dimenzije pribl. Š 1,1 x G 1,6 x V 2,3 m - fiksna miza - pritrdilna plošča - hidravlična sklopka Ortlinghaus z dodatno zavoro - ročno centralno mazanje Csdpfx Asv Az T Soahjrg Stroj je bil pri nas delno obnovljen, in sicer: - demontiran, očiščen in tehnično temeljito pregledan - izvlečena gred, preizkus razpok, nova tesnila - novo barvanje - nova elektro omara z zaslonom na dotik - nova prelomna plošča + rezalni obroč - aktualen preizkus stiskalnice