Odstranjevanje nakup rabljenega (2.503)

Stanje: rabljeno, ACCESSORIES 1°) Round Vibratory Finishing Machine Model CD200 * Sound insulation hood * Separation device * Tank dimensions: 200 [L] * Diameter: 1085 [mm] - Weight: 475 [kg] - Required space: 1560 x 1350 [mm] 2°) Drying Tunnel Model BFHL 350 * Weight: 1200 [kg] Redpfeug U Eqex Afasw - Required space: 2470 x 1030 [mm] 3°) Powered Table Model SDT 1500 * Diameter: 1500 [mm] * Max. load on table: 25 [kg] - Weight: 100 [kg] 4°) Waste Treatment by Centrifugation Model ZM03 * Water recycling - Weight: 250 [kg]

Stanje: rabljeno, - Power consumption: 26 kVA 3P400V /N/PE/50Hz; protection: 63A - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1,700 m³/h at Δp = -850 Pa, min. 20 m/s, run-on time 15s The system has been cleaned, packed, preserved, and stored by the manufacturer. It is complete and ready for operation. The system can be inspected at any time by prior appointment. Rjdpfx Aswpkc Iofajw

Stanje: rabljeno, Water deaeration (degassing) system for the removal of oxygen from drinking water, predominantly built in 1995. The system operates according to a two-stage cold stripping process with CO2 in countercurrent flow and consists of the following components: Rjdpfsy Ti Anex Afajw - 2 serially connected degassing vessels - Vacuum pump with separator - 7,000 l pressure tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure - Centrifugal pumps - CO2 dosing via needle valve - Pipe manifold, various pipelines, valves, fittings, measuring and control technology - Control cabinet with Simatic S5 controller Machine (additional info): Cold degassing by CO2 stripping; years built: 1995 – 2018 Capacity: 20,000 l/h Each degassing vessel: 285 l, operating overpressure up to 1 bar Buffer tank volume: 7,060 l, operating overpressure up to 4 bar Residual oxygen content approx.: 0.010 – 0.015 mg/l Operation/control: Simatic S5 Material: Stainless steel Mounting/position: installed on walk-on stainless steel frame Equipment: 2 x degassing vessels, pressure tank, centrifugal pumps, vacuum pump with separator, CO2 dosing (via needle valve), flow, pressure and level measurement, control cabinet, pipe manifold, various pipelines, valves, and fittings.

Leto izdelave: 2026, stanje: novo, Working width: 1000 mm Workpiece thickness - max.: 0.5 - 50 mm Abrasive belt width: -- mm Machine weight: approx. 2.5 t With the SBM-L 1000 G1S2, operating in dry mode, steel, stainless steel, and aluminum can be processed in alternating operation. It deburrs and rounds the edges of the external and internal contours of stamped, laser-, fine plasma-, or waterjet-cut workpieces with a thickness of up to 50 mm on both sides in just one pass. * Two grinding units, one each on the top and bottom, remove spatter and light burrs on outer and inner edges of sheet metal parts. * In total, four sanding belts—two on the top and two on the bottom—process the sheets simultaneously on both sides. All edges are deburred or rounded, depending on the tool settings. * Double-sided processing eliminates the need for time-consuming flipping of the workpieces and reworking. * Each pair of units can be switched on/off and adjusted individually according to the application. * Including Siemens S7 control system: - Easy and convenient operation via an intuitive user interface - High operational security with 3 password-protected user levels - Integrated program memory - USB / RJ45 interface for data exchange or external components (e.g., barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to the preselected material thickness - Standby position for deactivated units - Service-friendly (e.g. plain text error messages) Comprising: - SBM-L 1000 G1S2 grinding machine (kit) Redpfxjuia Dqj Afasw - 4 x SBM 1000 grinding belts with rib P60 SiC - SBM-L 1000 sanding belt L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - Dry dust extractor DDE 3002 - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Detailed technical data available on request. The machine is available ex stock Niederlangen for immediate delivery.

Leto izdelave: 2026, stanje: novo, Working width: 950 mm Maximum workpiece thickness: 1.0 – 50 mm Abrasive belt width: 970 mm Abrasive belt length: 1900 mm Machine weight: approx. 1.8 t The SMD 123 RE is a universal entry-level machine designed for deburring, uniform all-round edge rounding, and surface grinding of sheet metal in dry processing. * Suitable for processing steel, stainless steel, and aluminum. * The non-slip conveyor belt ensures safe transport and processing of even small workpieces. * The two rotary heads provide uniform edge rounding on all sides and a non-directional surface finish. * Intuitive touch panel operation enables any operator to quickly become familiar with the machine. * SMD 1 models are quickly installed and ready for operation. * The compact design saves valuable production space. * Low acquisition and operating costs result in short payback periods and guarantee economical processing of your workpieces. Includes: - SMD 123 RE grinding machine (kit) - SMD 123 RE conveyor belt cleaning unit - SMx xx3 – sanding belt +120 Cubitron II, width 970 mm, length 1900 mm Redsvfhm Djpfx Afaew - SMD 1x3 set of 3-piece abrasive flap roller P120 - DDE 3002 dry extraction system - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available on request. The machine is available for immediate delivery from stock in Niederlangen.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 22 kW (29,91 KM), skupna širina: 1.070 mm, skupna dolžina: 1.555 mm, skupna višina: 1.058 mm, trajanje garancije: 24 meseci, Oprema: žerjav, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customised shipping quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 6-8 weeks after receipt of payment 📦 Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Proton BSK Paint Stripping Tank – BSK-1200-700×700 PROFESSIONAL SOLUTION FOR CHEMICAL PAINT STRIPPING! The BSK-1200-700×700 stripping tank is designed for the simple and safe removal of paints from workpieces, suspension devices, coating defects, or parts to be reprocessed. The heated tank can be operated with various suitable paint stripping chemicals. The choice of material and design depends on the chemical used and the process conditions. ☘️ Easy to operate ☘️ Clean working environment ☘️ Fast solution ✅ Heated paint stripping tank ✅ Suitable for powder and wet paint processes ✅ For suspension devices, workpieces, and coating defects ✅ Automatic thermostat for temperature control ✅ Digital timer with end-of-process signal ✅ Hinged lid to reduce vapor distribution in the workspace ✅ Draining via stainless steel ball valve ✅ CE-compliant design ✅ Various additional options available ➖➖➖➖➖ Technical Specifications: ✔️ Model: BSK-1200-700×700 ✔️ Working area: 1200 x 700 x 700 mm ✔️ Internal dimensions: 1270 x 770 x 820 mm ✔️ External dimensions: 1380 x 880 x 1058 mm ✔️ Max. fill capacity: approx. 724 L ✔️ Heating output: 4 x 5.5 kW ✔️ Installed power: approx. 22 kW ✔️ Rated current: approx. 31.8 A ✔️ Recommended fuse: 50 A ✔️ Exhaust fan: 1 x 1.5 kW ✔️ Exhaust connection: Ø250 mm ✔️ Average heat-up: approx. 15.4 kWh/h in the first 3 hours ✔️ Average consumption: approx. 62.8 kWh/8 hrs ➖➖➖➖➖ Material Design and Chemical Resistance: As standard, all media-contacting components such as tank interior, workpiece basket, and filter unit are manufactured from V2A / AISI 304 stainless steel. Depending on the chemical used and process conditions, these components are also optionally available in V4A / AISI 316 stainless steel. V4A is recommended for aggressive, chloride-containing or highly corrosive chemicals. For correct material selection, please provide the technical data sheet or chemical composition of the planned stripping agent before preparation of a quotation. ➖➖➖➖➖ ⚙️ Optional Extensions Available ✅ Stainless steel immersion basket ✅ Drip pan ✅ Crane support and crane ✅ Stripping/cleaning cabin ✅ Pneumatic lid opening ✅ Stainless steel mixer ✅ Extraction hood with explosion-protected fan ✅ Special sizes and custom designs on request ➖➖➖➖➖ Other BSK paint stripping tanks available in various sizes. Detailed dimensions and technical data of further models can be found in the attached catalogue. Rsdpfx Afjfw Nvxeaew ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models. Please contact us for leasing, hire purchase, or instalment payment options. Custom sizes or individual designs available on request. We are happy to design a tailored solution for your stripping processes. Enquire now – Make your paint stripping cleaner, faster and more professional!

Stanje: dober (rabljeno), Odbrojilni stroj, stroj za odbrojiljevanje cevi, stroj za odbrojiljevanje lukenj, naprava za odbrojiljevanje, stroj za odbrojiljevanje s krtačo, stroj za odbrojiljevanje s krtačo, žična krtača Rsdpoy R Rkzjfx Afasw - Proizvajalec: wrt, stroj za odbrojiljevanje s podnožjem - Pogon: 3,0 kW / 2800 obr/min - Krtača: Ø 250 mm - Gred: Ø 80 x 110 mm - Dimenzije: 660/430/V1200 mm - Teža: 101 kg

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: S352621, S352622, S352623, Sistem za razigljevanje, sestavljen iz: 3 robotskih celic, vsaka z robotom Kuka KR10 1440-2 z vreteni za razigljevanje, 3 zaščitnih ohišij z nakladalnimi vrati za vsakega robota, 1 hidravličnega agregata za vpenjalne sisteme, 3 hidravličnih vpenjalnih sistemov. Rodpfx Ajyqycxjfaow Več podrobnosti o stanju in tehničnih podatkih je navedeno v priloženem strokovnem mnenju.

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Redpfozd Tllox Afaow Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.500 mm, skupna širina: 1.000 mm, skupna višina: 1.700 mm, vrsta pogona: Elektrisch, širina transportnega traku: 800 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Offertă se oferă o mașină (construcție specială) pentru încălzirea sau arderea cu flacără a lemnului, copitelor de cal sau a altor materiale cu ajutorul unei benzi transportoare din sârmă cu foc. Sunt utilizați arzătoare pe gaz/poturi de foc dispuse 2x6 sus (în două rânduri decalate) și 2x6 jos (de asemenea în două rânduri decalate), fiecare rând fiind comutabil individual. Această mașină este perfectă pentru toate companiile specializate în Yaki Sugi (Shou Sugi Ban). La cerere pot fi puse la dispoziție videoclipuri de funcționare. Viteza benzii poate fi reglată continuu. Date tehnice (foto): - Putere: 0,75 kW - Lățime bandă transportoare: 800 mm Redpoy N Ekmefx Afaow - Dimensiuni: 2500 x 1000 x 1700 mm Mașina poate fi inspectată în Schöneiche lângă Berlin (15566). Preț exclusiv TVA 19%.

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom. Redpfxowqmyfe Afajw

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – structural steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection: Ø 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made of stress-relieved steel-welded construction for a stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta starting of main motors * Analog ammeters for each group * Digital display for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel frame, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed by frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers on front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller, anti-oil and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic brake in emergency. Pneumatic tensioning system for sanding belt. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and time. Contact roller positioning accuracy mm +/- 0.02 Contact roller positioning speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore 55 Sanding belt speed m/s 3 - 18 Motor power kW Rsdowiqukepfx Afasw 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Oscillating lateral movement of the entire group. Quick-change system for brushes. Brush diameter mm 115 Number of brushes pcs 8 Oscillation stroke mm 15 Rotational motor power kW 2.2 Speed rpm 1,000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 Optional equipment: B group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with 0.3 mm wire brush €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1,100 included OPTIONS: Return to Sender System (machined part output to the front) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00

Stanje: dober (rabljeno), Whitworth thread tap, manufacturer: Reishauer Rjdpedx Ug Hofx Afajw Model: Whitworth 01 W 1 3/4 inch HSS (High-Speed Steel)

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 2017038, Caracteristici tehnice: Redpfxsxx Nq To Afaow ⚙️ Specificații de bază Attribut Valoare Tehnologie Debavurare cu jet de apă la presiune înaltă Presiune maximă Până la 1000 bar Materiale prelucrate Fontă, aluminiu, oțel Tip utilaj Masă rotativă sau tunel cu avans pas cu pas Automatizare Braț robotic cu secvență programabilă: Staubli TX60 retrofitat (nou)!!! Material duză Aliaj cu durată mare de viață Construcție Oțel inoxidabil AISI 304 Manipulare piesă Fixare mecanică pe paleți personalizați Tratament apă Sistem integrat de dezoleiere și filtrare 🧰 Funcții & Capacități Debavurare și spălare: Elimină bavurile detașabile și spanul inclus, chiar și din găurile intersectate. Programare flexibilă: Suportă diverse geometrii de piese și volume de producție. Integrare robotică: Duzelor sunt montate pe roboți antropomorfi pentru țintire precisă. Design modular: Configurabil pentru diferite layout-uri și obiective de productivitate. Funcționare eco: Curățare pe bază de apă cu durată extinsă a băii datorită filtrării. Masa de încărcare/descărcare: Operare manuală, cu posibilitatea funcționării în paralel pe 2 stații și dispozitive Poka Yoke. Stare utilaj: FUNCȚIONAL - Pompa de înaltă presiune necesită retrofitare pentru a atinge 1000 Bar (actual: 350 Bar)

Stanje: rabljeno, Teža stroja ca. 90 kg Dve nastavljivi hitrosti (1500 in 3000 obr/min) Moč 1,5 kW do 2,0 kW Maksimalni premer krtače = 250 mm Redpfx Aezhcihsfaew Maksimalna širina krtače = 60 mm do maks. 120 mm Maksimalna širina obdelovanca = 75 mm do 120 mm

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Neprekinjeni tračni stroj za odstranjevanje fosfatov in pranje z žično mrežo Proizvajalec: Aquaflot s.r.o. Leto izdelave: 2002 Stanje: Na voljo za ogled Ponujamo dobro vzdrževan neprekinjeni tračni stroj z žično mrežo za odstranjevanje fosfatov in pranje, primeren za čiščenje in površinsko obdelavo jeklenih komponent pred toplotno obdelavo, nanašanjem premazov, barvanjem ali montažo. Ključne značilnosti - Neprekinjeno delovanje z žično mrežnim tračnim transporterjem - Zasnovan za procese odstranjevanja fosfatov in pranja - Primeren za srednje do visoke proizvodne kapacitete - Robustna industrijska konstrukcija - Enostavna integracija v obstoječe proizvodne linije - Zanesljiva in preverjena tehnologija Uporabe - Avtomobilske komponente Rsdpfx Aozf Hmrefaew - Vijaki in pritrdilni elementi - Kovane in strojno obdelane kose - Priprava na toplotno obdelavo - Splošna površinska obdelava kovin Stroj je trenutno na voljo in ga je mogoče ogledati po dogovoru. Dodatne tehnične informacije, mere, fotografije in videoposnetki so na voljo na zahtevo. Lokacija: Nemčija Dobava: ex works (EXW) Kontakt: Fornax Machinery GmbH Za več informacij in ceno nas prosimo kontaktirajte.

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually Rjdpfxeu Ngc No Afaew - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Stanje: novo, Leto izdelave: 2026, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Rodpot D D Nzsfx Afaow Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Leto izdelave: 2003, stanje: rabljeno, Kontaktni valj 70 x 50 Dimenzije trake 2000 x 12/50 Pogonska snaga 2,2 kW Dimenzije stroja cca 400 x 1100 x 1250 mm Brusilica s otvorenom brusnom trakom / stroj za skidanje srha Širina brusne trake od 12 - 50 mm u vertikalnom radnom položaju Obostrani nagib glave do 45° Jednostavno savijanje trake za praćenje oblika obratka Brzina rezanja 24 m/sek veliki oslonacni stol s kugličnim valjcima uključujući samofiltrirni usisni sustav, filtar crijevo od vatrostalnog poliesterskog materijala za najsitnije čestice prašine, impeler s otvorenim lopaticama. Potrošnja zraka 700 m³/h4 Redpfx Afey Ihabsaew s velikim asortimanom brusnih traka!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Rodjtzfntjpfx Afasw Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - new slewing ring (ball bearing turntable) Rjdpowt Ry Uofx Afaow - outer diameter: 1100 mm - inner diameter: 878 mm - height: 50 mm - 8 x M16 mounting holes - reputable German manufacturer - suitable for VK 26 models - available immediately

Stanje: rabljeno, Leto izdelave: 1994, Troslojni sistem za degazaciju vode za odstranjevanje plinov iz vode in impregnacijo s CO2. Surova voda vstopi skozi injektorsko šobo v prvi rezervoar za degazacijo. Zaradi visoke hitrosti toka se kisik in dušik izločita iz vodnega curka in uhajata na vrhu rezervoarja. Ta postopek se ponovi v drugem rezervoarju za degazacijo. V tretjem rezervoarju (rezervoar za impregnacijo) se voda po vstopu skozi injektorsko šobo meša z CO2 pod tlakom za impregnacijo v zgornjem delu rezervoarja. Redpfx Asxzqt Iefaew Stroj (dodatek): večstopenjska hladna degazacija z impregnacijo Osnovna konstrukcija: na okvirju iz nerjavnega jekla Oprema: 3 rezervoarji (vsak z manometrom); 3 centrifugalne črpalke; električna omarica z upravljalno ploščo; cevovodi z raznimi armaturami.

Stanje: rabljeno, Leto izdelave: 2012, Max. working width: 1000 mm Processable sheet thickness: 0.5 – 50 mm Rated current: 82 A Rated power: 44.5 kW Protection class: IP 42 Infinitely variable feed speed: 0–4 m/min Sheet thickness adjustment: electric Tool adjustment: electric Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Rjdpfx Afey Sp Hdeaew Standard Equipment Line consisting of an SBM-M 1000 D2 and an XL-1000, connected by two conveyors: SBM-M 1000 D2: Double-sided slag removal for plasma- and oxyfuel-cut sheets up to 120 mm Significant savings on tool costs due to mechanical slag removal – eliminates the need for time-consuming and costly grinding Double-sided slag removal eliminates the time-intensive flipping or double handling of often very heavy workpieces Up to 60% labor time savings compared to single-sided machines Modular, compact design in modern machine styling – minimal space required Dry processing The cross-processing principle ensures even tool utilization across the entire working width Upper and lower units are separately electrically adjustable and can be individually switched on/off Innovative tool and feed system allows optimal adaptation to warpage and workpiece tolerances Maximum productivity with consistent processing quality Improved working environment – reduced dust, dirt, and noise emissions Optionally available: conveyor systems, handling systems, robotics, automation, processing tools SBM-XL 1000: Deburring and edge rounding of workpieces up to 120 mm Double-sided processing eliminates the need for costly flipping or double handling of heavy workpieces Simultaneous deburring and edge rounding of internal and external contours Dry processing Simple, intuitive operation Processing units are electrically adjustable and individually switchable Maximum productivity with consistent machining quality Cross-processing principle provides optimal tool utilization across the entire working width Fast and easy tool change within a few minutes Modular, compact machine design with a small footprint Improved working environment – reduces dust, dirt, and noise emissions Optionally available: conveyor systems, handling equipment, automation, special solutions For recurring customer requirements, processing parameters can be quickly and easily recalled using predefined programs Up to 60% labor time savings compared to single-sided grinding machines Additional Equipment – Extraction system

Stanje: dober (rabljeno), Leto izdelave: 1995, Model: Rotomat 180 Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Main components: - Main switch – red rotary knob (positions 0/1) - Fault indicator – signals machine error - Power indicator – power-on control lamp Brush rotational speeds: I: 800 rpm II: 1600 rpm Working width: approx. 180 mm (designation “180”) Type of processing: brush deburring (suitable for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed adjustment: 2-stage (800 and 1600 rpm) Dust extraction connection: yes (extraction nozzle visible at the rear of the machine) Safety features: emergency stop, mechanical interlocks, fault indication 🔹 Typical applications - Removal of sharp edges after laser cutting, punching, or milling - Processing of small and medium-sized metal parts - Surface preparation before painting, galvanizing, or welding For sale: EWU Rotomat 180 Deburring Machine Offered for sale is a brush deburring machine – EWU Entgrattechnik Rotomat 180, year of manufacture 1995, produced by Egon Wutzke (Germany). The machine is fully functional, used, has been serviced, and is ready for immediate operation. Technical specifications: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Rotational speeds: 800 / 1600 rpm (2 ranges) Rodpfxew Uabij Afajw • Max. workpiece size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter current reading – shows 4451 h in the photo] • Equipment: nozzle for dust extraction connection Applications: • Deburring and rounding of edges of pipes, profiles, steel and aluminium parts • Edge finishing after cutting, punching, or milling • Surface preparation prior to painting, galvanizing, or welding Condition: • Machine in good technical condition • Electrical system and controls fully operative • Ready for use, inspection and testing possible on site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Naprava ima nov trak, rezervni trak in dodatne krtače. Opremljena je s celotnim kompletom krtač BOECK s brusnim papirjem ter dodatnimi žičnimi krtačami za odstranjevanje oksidov, kot je prikazano na fotografiji. V kompletu je tudi popolna enota za odpraševanje z industrijskimi filtri – odpraševalna naprava (filtracijsko-ventilacijska enota) proizvajalca Keller. Rsdpfox Ht Rvsx Afaow