Nitto Kohki Co. Magnetni Vrtalnik nakup rabljenega (28.063)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Bedpfx Agjx A U Ncstsdb Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Bdedpfx Agsyxth Sjteb

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9332067, VALJČNI TRANSPORTER - POGRADNA STROJNA LINJA ZA PESKANJE PROIZVAJALEC: RUMP TIP: 20-W 1500-4 Proizvajalec: Rump Tip: 20W-1500-4 Letnik: 2012 Dimenzije si lahko ogledate v tehnični risbi, prav tako tudi število obratovalnih ur. Bdjdoy Entiepfx Agtob Vključuje: filtrirno napravo, zvočno izolacijo, krmilno omaro, celotno dokumentacijo itd. ODLIČNO STANJE Gre za rabljeno, pripravljeno napravo za takojšnjo uporabo. Prodaja brez garancije in jamstva. Pridržujemo si pravico do vmesne prodaje in napak.

Stanje: rabljeno, Leto izdelave: 2001, - Leto izdelave: 2001 Specifikacije - Dolžina reza: 3100 mm - Kapaciteta: 16 mm - Hod: 170 mm - Število hodov: 10 /min Bdodpfexa Aclox Agtjb - Rezervoar za olje: 410 l - Moč motorja: 37 kW - Obratovalna napetost: 400 V - Nazivni tok: 72 A - Nazivni tok glavne varovalke: 100 A - Dimenzije (ŠxVxG): 3750 x 2400 x 3425 mm - Teža: 13.800 kg

Stanje: rabljeno, Bigalni in perforirni stroj W. Kroll & Co. Spletni video ogled prek WhatsApp - MS Zoom - Telegram Bjdoyua Suspfx Agtjdb Na zalogi Emskirchen/Nürnberg - Na voljo takoj - Možnost preizkusa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, Ta ponudba vključuje odprto mešalno valjarnico za gumo in plastiko proizvajalca Kim Ho Sheng Industrial Co Ltd, model ROLL 16x42'' L, izdelano leta 1978. Stroj ima dva velika kovinska valja, namenjena za mešanje gumijastih in plastičnih materialov. Opremljen je z močnim izpušnim pokrovom ter sistemom cevi nad valji za ustrezno prezračevanje med delovanjem. Kontrolni ročaji so nameščeni na obeh straneh stroja in omogočajo ročno nastavitev in upravljanje. Ta mešalna valjarnica je primerna za industrijsko predelavo gume in plastike v okoljih, kjer so potrebne odprte mešalne valjarnice. Bdjdjyqyb Ujpfx Agtjb

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Bsdpfx Asy H H Uusgtsdb Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Ø110 reamer, 5t swivel Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, bushing) Price incl. VAT.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 3.500 kg, dvižna višina: 6.000 mm, vrsta goriva: električni, HT-30 Stivuitor Electric cu Clemă — 3,5T / Înălțime de Ridicare 6m HT-30 este un stivuitor electric robust și performant, proiectat pentru operațiuni solicitante în depozite și industrie, unde este necesară ridicarea precisă la înălțime. Construit pe un catarg rigid tip H din oțel de 120 mm, acesta oferă stabilitate și durabilitate excepționale în orice condiții de operare. Specificații principale: - Capacitate de ridicare: 3.500 kg - Catarg triplex cu înălțime de ridicare de 6 metri Bjdpfeyymkiox Agtodb - Lungime furci: 1.220 mm - Clemă de transport inclusă Transmisie & sistem de propulsie: - Motor AC de ridicare: 10 kW - Motor AC de deplasare: 7,5 kW - Anvelope solide, cu rezistență mare la uzură, pentru durată lungă de exploatare Echipare pentru siguranță & confort: - Iluminare LED pentru lucru, semnalizare stânga/dreapta, stopuri și lumini de mers - Panou de instrumente LCD - Claxon electric - Centură de siguranță Catargul triplex și înălțimea de ridicare de 6 metri fac acest utilaj ideal pentru operarea în rafturi înalte. Configurația cu motoare AC asigură întreținere minimă, frânare regenerativă și control precis și lin al sarcinii. Clemă de transport integrată oferă versatilitate la manipularea mărfurilor nepaletizate, precum role, butoaie sau baloți. Stare: Nou Disponibilitate: În stoc

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Bdedpfovcqy Ujx Agtjb Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Control / Operation: Control cabinet with push-button operation Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit Bdjdpfxsyt Nm So Agtjb

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l Bdjdow Ivvcopfx Agtsb 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Bodpfx Agsw Ivk Tjtsdb Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Bdsdpfx Ageu Hy Tpjtjb Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t - Za tirni sistem - Baterijski pogon Bedpfx Asyyxidsgtodb - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. Bdedpfsyyxfrox Agteb - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem - S sprejemnimi površinami za vpenjanje obdelovancev - Rotacijska miza kot opcija

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ročni strojni voziček za peskalno napravo, nosilnost 5 t - D= 3000 mm, Š= 1500 mm, V= 500 mm - Nosilnost: 5 t - Peskalni voziček s obročastimi valji za tirnice v peskalni hali - Profili postavljeni pokonci, da lahko peskalni material odteče Bsdpfxjyyxa Ne Agtodb - Vlečne zanke za viličarja - Vrtljiva miza na voljo kot opcija

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 1.500 mm, dolžina obdelovanca (maks.): 7.000 mm, Linija za prašno lakiranje aluminijastih profilov – skoraj nova, popolnoma delujoča in pripravljena za prodajo Na voljo je popolna avtomatska linija za prašno lakiranje znamke NYS Equipments Co., Ltd., zelo malo uporabljena, popolnoma funkcionalna in trenutno v komercialni uporabi. Linija je idealna za lakiranje aluminijastih profilov do dimenzij 7.000 x 300 x 1.500 mm (D x Š x V), s proizvodno zmogljivostjo do 15 nosilcev/uro. Ključne tehnične značilnosti: ✅ Postopek: avtomatsko elektrostatično prašno lakiranje z 16 avtomatskimi in 4 ročnimi pištolami tipa corona ✅ Peč za polimerizacijo: plinsko ogrevanje (RIELLO), kapaciteta 700.000 kcal/h, notranje dimenzije 11,1 x 7,8 x 2,59 m, PID regulacija temperature z natančnostjo ±2 °C ✅ Sušilna peč: plinsko ogrevanje (200.000 kcal/h), notranje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dvoverižni sistem z nastavljivimi nosilci (razmak 2.250 mm), avtomatsko mazanje in pogonski motor 3,75 kW z nastavljivo hitrostjo (0–6 m/min) ✅ Sistem za vračanje prahu: ciklon in after-filter z avtomatskim vibracijskim sitom ter 24 dolgofibrnimi filtri. Pretok ventilatorja do 19.263 m³/h, avtomatsko povratno čiščenje z zrakom Bdjdpfewvaaisx Agtob ✅ Krmilni sistem: PLC s touch-screen vmesnikom, popolnoma avtomatsko spremljanje in vodenje lakirnega, sušilnega in povratnega procesa Dodatne prednosti: – Linija je trenutno v komercialni uporabi, možen ogled in izobraževanje osebja – Prodaja se po načelu 'videno–kupljeno' (as is, where it is) – Demontaža in transport nista vključena, lahko pa se dogovorita na licu mesta Cena: 60.000 €

Stanje: nepreverjeno (rabljeno), Sortiment – pnevmatske sponke, valji Tünkers, DE-STA-CO itd. Približno 50 kosov z obilo dodatne opreme in rezervnimi deli ----- Stanje artikla: Blago izvira iz razpusta skladišča rezervnih delov. Ni preverjeno z naše strani. Bodpfxjy Akq Eo Agtodb Interna številka: 484

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 50 h, številka stroja/vozila: LW250*1000, Dekanterska centrifuga, proizvedena 2020. godine, ali puštena u rad u maju 2021! Mašina je u praktično novom stanju (ukupno korištena oko 50 radnih sati)! Dekanter je na prodaju zbog promjene tehnologije, radi besprijekorno! Bodpfx Agjpu A D Aotedb Proizvođač: YIXING HEAD SEPARATOR MACHINERY CO. LTD., KINA Godina proizvodnje: 2020 Serijski broj: LW250*1000 Signal mašine: 02-001 Oznaka dekantera: 2647 Kapacitet formiranja mulja: 500 kg/h Snaga glavnog motora: 7,5 kW Snaga pomoćnog motora: 3 kW Kapacitet: 1-5 m³/h Neto masa dekantera: 1000 kg Materijal mokrih dijelova: 1.4404 Protok napajanja: 0,5t – 3t/h Referentni broj od nehrđajućeg čelika: 2590

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar Bdsdpoyzxfnsfx Agtjb - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 0,283 m², Filtre pressoir Nutsche, Nutsche d'aspiration, filtre à vide, inox, revêtement Halar® Année de fabrication : 2009 État : occasion Disponibilité : sur stock Documentation : complète Désignation/Type : Filtre-presse Nutsche Halar®, filtre à vide, filtre d'aspiration, capacité 62 litres En état de marche : oui Surface de filtration : 0,283 m² Matériau : inox 1.4404, intérieur revêtu Halar® Contenance totale espace chauffant/refroidissant (L) : 10 Poids (kg) : 230 Contenance totale cuve (L) : 62 Température admissible de fonctionnement cuve (°C) : -20/+150 Pression admissible de fonctionnement cuve (bar) : -1/+6 Pression admissible de fonctionnement chauffage (bar) : -1/+6 Température admissible de fonctionnement chauffage (°C) : -20/+150 Surpression de calcul (bar) : 11,5 Structure porteuse : sur pieds Matériau chauffage : inox 1.4404 Pays de fabrication : Suisse Accessoires et équipements : manomètre, soupape de surpression, regard, robinet à boisseau sphérique, raccord Camlock Bsdpfx Aoxx Sy Dsgtjdb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 0,283 m², Filter pod tlakom Nutsche, vakuumski filter, tlačni Nutsche Leto izdelave: 2009 Stanje: rabljeno Razpoložljivost: na zalogi Dokumentacija: popolna Naziv/tip: Tlačni filter, vakuumski Nutsche filter, sesalni filter, prostornina 62 litrov Uporabno stanje: da Filtrirna površina: 0,283 m² Material: nerjavno jeklo 1.4404 Bsdpfx Agsxxxqvjtedb Skupna prostornina grelno-hladilne cone (l): 10 Teža (kg): 204 Skupna prostornina posode (l): 62 Dovoljena delovna temperatura posode (°C): -20/+150 Dovoljen delovni tlak posode (bar): -1/+6 Dovoljen delovni tlak grelca (bar): -1/+6 Dovoljena delovna temperatura grelca (°C): -20/+150 Izračunani nadtlak (bar): 11,5 Nosilna konstrukcija: stoječa na nogah Material grelca: 1.4404 Država proizvajalca: Švica Oprema & vgrajeni deli: manometer, varnostni ventil, kontrolno steklo, krogelni ventil, Kamlock spojka, pomoč pri odpiranju

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 2522, Condition and details as per pictures Bdedpfx Agetxtfvetsb

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Bdjdjymmtcepfx Agteb Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Sistem tehtanja in pakiranja Leto: 2023 Sestavljen iz: 1 x poševni transportni trak, višina približno 5 m Portal 1 x večglava tehtnica s 14 glavami, dimple posoda 1 x vertikalni stroj za oblikovanje, polnjenje in zapiranje vreč, model: X500 (pakiral je 180 g vrečke stročjega graha) 1 x kontrolna tehtnica *Na voljo veliko videoposnetkov* Bdsdpfx Agoy Exfveteb