Kk-Industries Profilbiegemaschine Sahinler Hpk 180 Dp (2 Speed) nakup rabljenega (105.194)

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Nwodpfxjttc Ute Anzsk Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Njdpfod Aca Aex Anzjwk Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Njdpfx Anjynmzpozewk Hardened rolls are recommended

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Nwjdpfx Ansd Ab Hyjzsk Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Total power requirement: 4 kW Square steel: 25 mm Nsdpfx Aned Ab Hzezowk Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: rabljeno, Further technical data available on request Ride-on Scrubber Dryer KKI ASSM 650 with automatic drive and disc brushes Demo special price EUR 6,899 Product Information KKI 650 Ride-on Scrubber Dryer - Ride-on scrubber dryer Very compact ride-on scrubber dryer with a 65 cm working width and an extremely small turning radius for cleaning in confined spaces - Extremely maneuverable – on-the-spot turning - Multiple small disc brushes with increased contact pressure Description: - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact size provides this model with the necessary agility to operate effectively in tight spaces, allowing for easy navigation around obstacles - Control panel with operating elements - Manual operation of brush, squeegee, and water flow via levers - Tiltable dirty water tank for easier cleaning - Multiple small disc brushes with directly mounted squeegee enable a short design and a very small turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the squeegee upon accidental collisions to prevent damage Features: - Drive motor - Central, curved squeegee - 2-tank system - Hour meter - Fresh water tank with quick-fill hose Nwedpsl Iir Iefx Anzsk - Automatic speed regulation - Automatic water and brush stop - Battery charge indicator Scope of delivery: - 4 disc brushes - Battery - Charger - Cleaning area: 3,000 sqm - Working capacity: 3,250 sqm/h - Brush working width: 650 mm - Suction width: 750 mm - Speed: 5 km/h - Brush diameter: 4 x 180 mm - Brush pressure: 22 kg - Brush speed: 190 rpm - Fresh water tank: 65 l - Dirty water tank: 65 l - Power supply: 24 V battery - Total power: 1,650 W - Rated voltage: 24 V - Length: 1,150 mm - Width/Depth: 780 mm - Height: 1,425 mm - Weight (net): 220 kg

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing beam design NC preselect controller ELGO P 40 T with backgauge and blade gap adjustment directly from the control panel motorized backgauge up to 1,000 mm clearly arranged control panel mounted on a swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch blade gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easily replaceable and re-grindable blades adjustable cutting length for economical operation bottom blade with 4 cutting edges upper blade with 2 cutting edges qualified after-sales service Nodpfx Asvap Tuonzowk operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm - Motor power: 15 kW - Length: 3,800 mm - Width: 1,820 mm - Height: 1,920 mm - Weight: 7,700 kg Features: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on pivoting arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - 1,000 mm foldable finger guard - 1 side stop with T-slot - 2 sheet support arms with T-slot Nsdevap Thjpfx Anzjwk - Easy blade replacement and regrinding - Adjustable cutting length for economical processing - Bottom blade with 4 cutting edges - Top blade with 2 cutting edges - Qualified after-sales service - Operating manual in ENGLISH - Machine and equipment compliant with CE regulations

Stanje: novo, Pressing force: 40 Bending length: 1600 mm Distance between uprights: 1980 mm Motor power: 4 kW Ram stroke, max.: 150 mm Maximum opening: 370 mm CNC press brake 40x1600, 4 axes Y1-Y2-X-R with CNC crowning Technical parameters: Nominal press force: 63 kN Bending length: 1600 mm Nedpfxowacq Es Anzjwk Distance between columns: 1980 mm Throat depth: 250 mm Ram stroke: 150 mm Maximum opening height: 370 mm Ram descent speed: 180 mm/s Ram return speed: 150 mm/s Ram operating speed: 15 mm/s Main motor power: 4 kW CNC system: ZY68 Number of control axes: 4+1 Oil tank capacity: 90 L Back Gauge (X Axis): X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Motor power: 0.85 kW R-Axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Dimensions and weight: Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Additional motor power: 0.85 kW

Stanje: novo, Pressure: 150 Bending length: 3050 mm Frame gap: 3050 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 4740x2000x2680 mm Weight approx.: 9500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-15030 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new machine generation offers improved efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and capacities, Dener is a pioneer of this technology, bringing extensive experience and quality. Standard Equipment: KK-Industries holds the general agency of the DENER group. We have configured a high-quality model for Europe. The CNC servo electric press brake KK-Industries, made by DENER, includes: Technological Advantages, Model REVOLUTION DDM: The CNC servo electric press brake is characterized by high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% reduced energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Usable full frame length - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: 3D color graphics controller DELEM 66T with 17-inch touchscreen Y1, Y2, X, and R axes controlled by CNC CNC crowning via 3D control Nwedpod Etf Ejfx Anzek X-axis 500 mm, R-axis stroke 150 mm (for 1.5 m and 2 m models) X-axis 750 mm, R-axis stroke 250 mm (on other press brakes) We make no compromise on tooling, equipping the KKI REVOLUTION CNC servo electric press brake with quality tools from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 (V = 16, 22, 35 and 50 mm) Back gauge with servo motors on linear guide and ballscrew Of course, a machine is only as good as its service. Therefore, we focus on highly qualified staff with long-standing experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating manuals in GERMAN and ENGLISH Options: Additional controlled axes for backgauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R type backgauge X-Prime type backgauge Hydraulic upper and lower tool clamping for WILA tools CNC 3D touchscreen DELEM DA-69T control KK-Industries GmbH

Stanje: novo, Pressure: 175 Bending length: 3570 mm Frame width: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-17535 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are, due to their flexibility and reliability, the technology of tomorrow. This new generation of machines offers higher speed and precision, delivering greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes in a range of models and tonnages, Dener is a pioneering force in this field, bringing extensive experience and quality. Standard equipment: KK-Industries is the general agent for the DENER group. For the European market, we have assembled a premium model. The CNC Servo Electric Press Brake KK-Industries made by DENER: Njdpjd Etf Djfx Anzjwk Technological advantages—Model REVOLUTION DDM: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full frame length usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphics controller Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D control - X-axis: 500 mm; R-axis: 150 mm stroke (for 1.5 m and 2 m machines) - X-axis: 750 mm; R-axis: 250 mm stroke (for all other press brakes) For the upper tool and die, we make no compromises—equipped with premium tools from EUROSTAMP Italy. - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws The quality of a machine is matched by its service. That’s why we prioritize highly qualified staff with long-standing experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2; R-Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stanje: novo, Pressure: 65 Bending length: 2550 mm Frame width: 2550 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 3680 x 1960 x 2500 mm Approx. weight: 5,500 kg Motor power: 11 kW CNC Servo-Electric Press Brake KKI Model REVOLUTION DDM-6525 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic systems and, thanks to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new generation of machines provide you with greater efficiency, ergonomic advantages, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with a variety of models and tonnages, Dener is a pioneer of this technology, with extensive experience and quality. Standard Equipment: KK-Industries is the exclusive representative of the DENER group. We have developed a premium model specifically for the European market. The CNC Servo-Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC Servo-Electric Press Brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Full usable length between side frames - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17” touchscreen - Y1, Y2, X, and R axis CNC-controlled - CNC crowning via 3D control - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes Nedod Etfxepfx Anzewk We make no compromises regarding punching tools and matrice—each CNC Servo-Electric Press Brake KKI DENER REVOLUTION is equipped with quality tooling from EUROSTAMP, Italy. - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guides and ball screw Of course, a machine is only as good as the service behind it. Therefore, we place great importance on highly qualified staff with extensive experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis backgauge, X1, X2 - R type backgauge - X-Prime type backgauge - Hydraulic upper and lower tool clamping - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stanje: novo, Punching force: 55 t Nwodettc Upepfx Anzsk Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,200 mm - Cutting angle: 1.30° - Backgauge: motorized, 1,000 mm - Motor power: 22 kW - Length: 3,800 mm Nedpfx Aovap Tnonzewk - Width: 1,950 mm - Height: 2,080 mm - Weight: 10,600 kg Equipment: - Swing beam shear design - NC pre-selection control ELGO P 40 T - With backgauge and cutting gap adjustment from the front via the control panel - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on swiveling arm - Hydraulic hold-downs positioned close to the cutting edge - Foot switch - Cutting gap adjustment - Cutting line illumination - Wide support table with ball transfers - Foldable finger guard, 1,000 mm - 1 T-slot side gauge - 2 sheet support arms with T-slot - Easy blade change and regrinding - Adjustable cutting length for economic processing - Lower blade reversible on 4 sides - Upper blade reversible on 2 sides - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Pressure: 220 t Bending length: 3100 mm Clearance between uprights: 2600 mm Throat depth: 410 mm Ram speed: 180 mm/sec Working speed: 10.0 mm/sec Return speed: 185 mm/sec Stroke: 275 mm Installation height: 550 mm Table height: 930 mm Table width: 200 mm Oil capacity: 300 l Operating voltage: 400 Volt Total power requirement: 18.5 kW Weight: 11,286 kg Dimensions (H x W x D): 4550 x 2250 x 2850 mm The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide choice of press forces from 40 to 1,500 tons to meet your individual requirements. This CNC-controlled press brake can also be expanded as a tandem machine, offering great flexibility with bending lengths. Numerous features are available to ensure simple and safe operation. The robust machine design, combined with precision CNC control, guarantees durable and reliable performance. Additionally, the machine offers a variety of expansion and equipment options for individual customization according to your needs. The DELEM DA CNC graphic control offers convenient operation via touchscreen and includes a comprehensive safety package. The machine can be easily operated via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by a foot switch. In addition to this safety measure, the operator is protected by a safety laser in the working area and a rear light barrier. The CNC control automatically calculates press force, bending tolerance, crowning setting, embossing force, and tool safety zones. ----- SPEED BEND PRO electro-hydraulic press brake with: * increased installation height * extended cylinder stroke * increased throat depth ----- Features: - DELEM CNC control model 'DA-66T' Graphic/Touchscreen * 2D graphic touchscreen programming mode Nwedpfx Aoxaag Ijnzjk * 3D display in simulation and production * 17" TFT color monitor with high resolution * Bending sequence calculation * Product programming and display in real size * USB interface - Swiveling touchscreen control unit, front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC-controlled crowning - CNC electrically actuated backgauge * Travel distance: X axis .. 800 mm // R axis .. 250 mm * Travel speed: X axis .. 500 mm/s // R axis .. 350 mm/s * On ball screw spindles * CNC controlled electric-motorized stop fingers Z1 + Z2 - Segmented gooseneck top tool: ROLLERI 135.85.R08, 'System A' * Including quick-change clamping system * Including crowning device in the tool holder - 1x universal reversible die block - Safety device at the rear: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device at the front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN sliding bearings) - 1x movable double foot pedal - CE-mark / Declaration of Conformity

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 20.684 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Roboter: 6640-105413 / Steuerung: 6640-105413, skupna masa: 1.460 kg, nosilnost: 180 kg, doseg roke: 2.550 mm, ABB industrial robot with IRB 6640 M2004 (IRB 6640-180/2.55 Standard) manipulator and IRC5 M2004 controller for industrial automation applications. Condition is used and tested. Typical applications include handling, assembly, machining, and general automation. Payload is 180 kg with a reach of 2550 mm, manufactured in 2013, with 20,684 operating hours and RobotWare Version RW5.15_02.00.2005 software installed. The system is equipped with main connection cable for power and data, power supply cable, FlexPendant programming handheld, resolver offset values on the housing, as well as software options: German language, World Zones, Path Recovery, Collision Detection, and Multitasking. Nodpfx Anezal Urszewk

Stanje: novo, Pressure: 20 tons Cylinder: stationary Stroke: 350 mm Frame width: 520 mm Working speed: 4 mm/sec Return speed: 30 mm/sec Length: 1200 mm Width: 500 mm Height: 1800 mm Approximate weight: 210 kg Nodpfjwwnhkox Anzswk Height-adjustable work table – manually adjustable for maximum operational flexibility Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for especially precise and efficient work

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° Nedpfxsd Ab Hms Anzjwk - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Pressing force: 50 Bending length: 2040 mm Frame width: 2040 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3170x1960x2500 mm Approximate weight: 4850 kg Motor power: 11 kW CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-5020 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and represent the technology of tomorrow thanks to their flexibility and reliability. The higher speed and precision of this new generation of machines offers greater efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology. Equipped with extensive experience and quality. Standard Equipment: KK-Industries is the general representative of the DENER group of companies. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full usable length between frames - Lower maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled via the controller - CNC crowning via 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes Nwjdpfxod Etfyo Anzok - We make no compromises on the punch and die: the CNC Servo Electric Press Brake KKI REVOLUTION is equipped with quality tooling from EUROSTAMP Italy. - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guideways and ball screw - Naturally, every machine is only as good as its service. That’s why we focus on highly-qualified engineers with extensive experience in CNC sheet metal processing. - Laser safety device on upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping systems - CNC 3D touchscreen control DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,329.00 - CNC crowning ¤ 4,658.00 KK-Industries GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machinery: From 01.07.2025, used machines can also be depreciated for tax purposes with a special depreciation rate of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 Para. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour, 2-component machine Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st Injection Unit 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Njdpjyf Uy Uofx Anzewk Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – full machine card as PDF document attached Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x blow-off Water BGS: 6 circuits each, nozzle side and ejector side BluePower technology up to 40% energy savings The machine is very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or delivered to site with freight costs reimbursed. Information about the machines we offer and our company: - We only sell machines acquired from ongoing production from our own stock in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers trading third-party property - All machines offered come from successful businesses where maintenance and care are standard - All offered machines can be inspected at our warehouse

Stanje: novo, Pressure: 80 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3680 x 1960 x 2500 mm Approx. weight: 6100 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-8025 Servo Motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, offering extensive experience and high quality. Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model specifically for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers technological advantages: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter - Full length between the frames is usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment includes: Nodpfx Anjd Etfwozjwk - 3D color graphics control Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC controlled via the controller - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises on the upper tool and die: CNC Servo Electric Press Brake KKI REVOLUTION equipped with high-quality tools from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge controlled by servo motors on linear guides and ball screws - As with any machine, service quality is pivotal; for this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing - Laser safety device on the upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 - R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning € 2,329 - CNC crowning € 4,658 KK-Industries GmbH

Stanje: novo, Sheet length: 2560 mm; Sheet thickness: 4 mm; Dimensions (LxWxH): 3200 x 2250 x 1400 mm; Motor: 7.5 kW; Weight approx.: 3500 kg Standard equipment: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front-side blade clearance adjustment Nwjdpfx Aegickvenzsk - Ball screw - Cut counter - Portable foot pedal with emergency stop button - Light barrier on rear safety devices

Stanje: novo, Pressure: 40 Bending length: 1530 mm Distance between side frames: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660x1960x2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-4015 Servo-motor driven press brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new machine generation offer you greater efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer in this technology, with extensive experience and quality. Standard equipment: KK-Industries is the general representative of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Model REVOLUTION DDM The CNC Servo Electric Press Brake is distinguished by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and noticeably quieter - Full working length between frames can be used - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: 3D colour graphical control Delem 66 T 17" touch screen Y1, Y2, X, and R axes CNC-controlled via the panel X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m models Nsdpfxjd Etfzo Anzewk X-axis 750 mm, R-axis stroke 250 mm on all other press brakes We also make no compromises on the upper tool and die and equip the CNC Servo Electric Press Brake KKI REVOLUTION with high-quality tooling from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 mm (V= 16, 22, 35, and 50 mm) Back gauge equipped with servo motors on linear guides and ball screws Of course, every machine is only as good as the service. For this reason, we place strong emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. Laser safety device at the upper beam CE safety equipment Operating manual in GERMAN and ENGLISH Options: Additional controlled axes for back gauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis back gauge, X1, X2 – R type back gauge X-Prime type back gauge Hydraulic upper and lower tool clamping CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,330 - CNC crowning ¤ 4,658 KK-Industries GmbH There's something for everyone here!

Stanje: novo, Sheet length: 2060 mm Sheet thickness: 4 mm Dimensions (LxWxH): 2700 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3000 kg Standard accessories: - NC control Nwedpfxjgickrs Anzok - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade gap - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on rear safety guards

Stanje: novo, Wilo Dry-Running Pump IPN50/180-7.5/2 AT, DN50 PN16, Art. 307833 / 2120882 Wilo Dry-Running Pump Model: IPN50/180-7.5/2 AT Connection: DN50, PN16 Power: 7.5 kW Max. Temperature: 140°C Speed: 2,900 rpm Article No.: 307833 / 2120882 The technical specifications below are identical with our previous model. Order Information Manufacturer: Wilo Product name: CronoLine-IL 50/180-7.5/2 Net weight approx.: 106 kg Article number: 2120882 Operating Data: Pumped medium: Water Medium temperature T: -20 °C Ambient temperature T: -15 °C Max. operating pressure PN: 16 bar Design note: 16 bar up to 120°C, 13 bar up to 140°C Minimum Efficiency Index (MEI): 0.4 Hydraulic Data: Minimum Efficiency Index (MEI): 0.4 Max. operating pressure: 16 bar Minimum medium temperature: -20 °C Maximum medium temperature: 140 °C Maximum ambient temperature: 40 °C Design note: 16 bar up to 120°C, 13 bar up to 140°C Motor Data: Power supply: 3~400 V, 50 Hz Voltage tolerance: ±10% Motor efficiency class: IE3 Rated motor power P2: 7.50 kW Rated current IN: 13.30 A Rated speed n: 2,900 rpm Power factor cos φ: 0.90 Motor efficiency ηM 50%: 88.9% Motor efficiency ηM 75%: 90.3% Motor efficiency ηM 100%: 90.1% Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection rating: IP55 Motor protection: No Materials: Pump housing: 5.1301 / EN-GJL-250, KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: Stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301 / EN-GJL-250, KTL-coated Condition: "New" Pumps from stock. Some units without original packaging. May show signs of storage or minor marks/dents. Unused, as evident from the mounting holes—there are no installation marks. See pictures. Shipment via special/parcel/freight forwarding P4 Nwsdpsivdz Nefx Anzek Find more articles—new and used—in our shop! International shipping costs on request!