Kk Kletzer Sistemi Varilnih Miz 3 D Brez Nastavitve Višine nakup rabljenega (95.403)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm Ledpfor Etulsx Al Neaa - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) Ledpfx Aljr D U I De Neaa - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: novo, Pressure: 320 Bending length: 3020 mm Distance between uprights: 2555 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785x2290x3100 mm Approx. weight: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes CNC-controlled via Esa S630 crowning controller (2D graphical control) CNC crowning control: Yes, via CNC crowning controller Esa S630 (2D graphical control) Motor power: 30 kW Standard Equipment: KK Kletzer Europa We have assembled a high-quality model for the European market: The CNC press brake KK-Industries made in Turkey. Model: KKI EUROPA XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy, and versatile application possibilities. EUROPA XL features a very large installation height, resulting in an extended stroke (cylinder travel). The throat depth is also above average, maximizing working flexibility. We focus on quality, which is also reflected in the control system. As standard, our machines come equipped with the premium Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes, all operated via the control unit. Naturally, the CNC crowning control Esa S640 (2D graphical control) is also included as standard. For the upper tool and die, we make no compromises, equipping the KKI EUROPA XL CNC press brake with high-quality tooling from EUROSTAMP Italy. Of course, a machine is only as good as its service—hence, we place great emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. Ljded Ehikepfx Al Neaa - CNC axes Y1, Y2, X, and R - Esa S640 controller (2D graphical control) - Back gauge with double linear guide and ball screw spindle - Motorized crowning system with CNC control - Heavy-duty design, height adjustment via handwheel; heavy-duty linear guidance for models from 175 tons - Laser protection device on the upper beam - CE safety equipment - Various options available Additional control units: ESA 640 2D 15'' touchscreen control €4,520 ESA 675 W 3D 21'' touchscreen control (Windows base) €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows base) €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressing force: 320 Bending length: 3020 mm Frame width: 2555 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785 x 2290 x 3100 mm Weight approx.: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes via CNC crowning control Delem DA 66 T (2D graphic control) CNC crowning via control: yes, via the CNC crowning control Delem DA 66 T (2D graphic control) Motor power: 30 kW Standard equipment: KK Kletzer Europa We have assembled a high-quality model for Europe. The CNC press brake from KK-Industries, made in Turkey. Model: KKI EUROPA XL The powerful EUROPA XL press brake stands out due to its high precision, accuracy, and versatile range of applications. The EUROPA XL features a very generous installation height, resulting in a large stroke (cylinder path). The throat depth is also above average to ensure maximum flexibility. We prioritize quality, which is also reflected in the control system. Standard control is the premium Delem DA 66 T (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with the CNC axes Y1, Y2, X, and R via the control system. Naturally, the CNC crowning control DELEM DA 66 T (2D graphic control) is also included. We make no compromises in the upper tooling and die, equipping the KKI EUROPA XL CNC press brake with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in the CNC sheet metal processing field. CNC axes Y1, Y2, X, and R Control DELEM DA 66 T (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel on linear guide 3 stop fingers Installation height 650 mm Throat depth 450 mm Stroke 400 mm Laser safety device on the upper beam CE safety equipment Various options available Additional control systems available: Ledofy Sb Eepfx Al Noaa ESA 640 2D 15'' touchscreen control    € 4,520 ESA 675 W 3D 21'' touchscreen control (Windows base)    € 6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base)    € 10,165 incl. DELEM 69 T 3D 17'' touchscreen control (Windows base)    € 16,350 KK-Industries GmbH There's something for everyone!

Stanje: novo, Pressure: 320 Bending length: 4050 mm Frame gap: 3550 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 4740 x 1725 x 3100 mm Approx. weight: 17,900 kg 4 axes (Y1, Y2, X, R): Yes, all axes via the Esa S640 (2D graphic control) CNC crowning via control: Yes, via the Esa S640 (2D graphic control) Laedpjfrqhpofx Al Noa Motor power: 22 kW Technical Specifications XL 40320 Bending length: 4050 mm Bending force: 320 t Approach speed: 125 mm/s Bending speed: 10 mm/s Return speed: 120 mm/s Stroke: 400 mm Installation height / daylight (E): 650 mm Throat depth (D): 450 mm Frame gap (B): 3550 mm Machine length (L): 4780 mm Machine width (W): 2290 mm Width without front gauge (Y): 1760 mm Max. height: 3100 mm Main motor: 30 kW Oil tank capacity: 400 l Machine weight: 17,500 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. Europa XL offers an exceptionally large installation height, resulting in a long stroke (ram travel). The generous throat depth is above average, minimizing operational limitations. We place a high value on quality, which is clearly reflected in the control unit. Our standard control is the high-grade Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes, all controlled via the Esa S640. Of course, CNC crowning via the Esa S640 (2D graphic control) is included as standard. When it comes to top and bottom tools, we make no compromises, equipping the KKI EUROPA XL CNC press brake with premium tooling manufactured by EUROSTAMP Italy. Naturally, any machine is only as good as the service behind it. That is why we rely on highly qualified staff with extensive experience in CNC sheet metal processing. Key features: - CNC axes: Y1, Y2, X, and R - Esa S640 (2D graphic control) - Backgauge with dual linear guides and ball screw drive - CNC motorized crowning device - Heavy-duty manual height adjustment (from 175 t heavy version with linear guide) - Laser safety system mounted on the upper beam - CE safety equipment - Various options available Other control options: - ESA 640 2D 15" touchscreen control: €4,520 incl. - ESA 675 W 3D 21" touchscreen control (Windows-based): €6,485 - DELEM 66 T 2D 17" touchscreen control (Windows-based): €10,165 - DELEM 69 T 3D 17" touchscreen control (Windows-based): €16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 175 Bending Length: 3020 mm Frame Gap: 2550 mm Installation Height: 600 mm Stroke (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 3700 x 2230 x 3025 mm Weight approx.: 12,050 kg 4 Axes (Y1, Y2, X, R): Yes – all axes via Esa S630 (2D graphic control) CNC Crowning via Control: Yes, through CNC controller Esa S630 (2D graphic control) Motor Power: 22 kW Technical Specifications: XL 30175 Unit Bending length: 3020 mm Bending force: 175 t Lowering speed: 150 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height / daylight (E): 600 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front gauge (Y): 1720 mm Maximum height: 3030 mm Main motor: 22 kW Hydraulic tank volume: 300 l Machine weight: 11,600 kg The robust EUROPA XL press brake impresses with its high precision, accuracy and versatile application options. The Europa XL features a very large installation height, thus providing a long stroke (ram travel). The generous throat depth is also above average, to keep restrictions at a minimum. We focus on quality, which is also reflected in the control system. As standard, we equip the machine with the high-quality DELEM DA 66 T control. Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R via the control system. Naturally, the DELEM DA 66 T is included as standard. We also make no compromises when it comes to the upper tool and die, fitting our KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Lodpfx Aefrvw Iel Noaa Of course, every machine is only as good as its service. That’s why we place our main focus on highly qualified staff with extensive experience in CNC sheet metal processing. CNC Axes Y1, Y2, X and R DELEM 66 T 2D 17” Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel; from 175 t heavy-duty version on linear guides Laser safety device on the upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller € 4,520 ESA 675 W 3D 21'' touchscreen controller (Windows Base) € 6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows Base) € 10,165 incl. DELEM 69 T 3D 17'' touchscreen controller (Windows Base) € 16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 135 Bending length: 3020 mm Frame width: 2555 mm Installation height: 550 mm Max. stroke length: 320 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2250x2835 mm Weight approx.: 9300 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller) CNC crowning via controller: Yes, via Esa S630 (2D graphic controller) Motor power: 15 kW Technical Specifications XL 30135 Unit Bending length: 3020 mm Bending force: 135 t Approach speed: 160 mm/s Bending speed: 10 mm/s Laodpfxed Ehine Al Noa Return speed: 130 mm/s Stroke: 320 mm Installation / clear height (E): 550 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front stop (Y): 1720 mm Maximum height: 2835 mm Main motor: 15 kW Oil tank volume: 190 l Machine weight: 9600 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height and, as a result, a generous cylinder stroke. Likewise, the throat depth is above average to ensure minimal restriction. We focus on quality, which is also reflected in the controller. As standard, our high-quality Esa S640 (2D graphic controller) is included. Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Naturally, CNC crowning with the Esa S640 (2D graphic controller) is also included. We make no compromises on the top tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we place a strong emphasis on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic controller) Backgauge with double linear guide and ball screw spindle Motorized crowning device with CNC control 2 heavy-duty front support arms with height adjustment via handwheel; heavy-duty linear guide version from 175 tons upward Laser safety device on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller – €4,520 incl. ESA 675 W 3D 21'' touchscreen controller (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 100 Bending length: 3020 mm Frame width: 2555 mm Installation height: 530 mm Maximum stroke length: 300 mm Throat depth: 450 mm Dimensions (LxWxH): 3725 x 2260 x 2780 mm Approximate weight: 8,550 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via controller: Yes, managed through the Esa S630 CNC control (2D graphic control) Motor power: 11 kW Technical specifications: Model: XL 30100 Unit Bending length: 3020 mm Bending force: 100 t Lowering speed: 160 mm/s Bending speed: 10 mm/s Return speed: 150 mm/s Stroke: 300 mm Throat depth (D): 530 mm Installation height / clearance (E): 450 mm Frame spacing (B): 2555 mm Machine length (L): 3725 mm Machine width (W): 2260 mm Width without front gauge (Y): 1690 mm Maximum height: 2780 mm Main motor: 11 kW Oil tank volume: 190 l Machine weight: 8,700 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application potential. The Europa XL offers an exceptionally large installation height, resulting in a long stroke (cylinder travel). The large throat depth is also above average, ensuring minimal restrictions during operation. We prioritize quality, which is also reflected in the chosen controls. Our standard control system is the high-quality Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R controlled by the Esa S640. Naturally, CNC crowning via the Esa S640 (2D graphic control) is also included. We make no compromises on tooling; the KKI EUROPA XL CNC press brake is equipped with premium tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we focus on highly qualified staff with extensive experience in CNC sheet metal processing. Features: - CNC axes Y1, Y2, X, and R - Esa S640 (2D graphic control) - Back gauge with dual linear guides and ball screw - Motorized crowning with CNC control - 2 heavy-duty front support arms with height adjustment via handwheel; from 175 t heavy-duty version on linear guide - Laser safety device on upper beam - CE safety equipment - Various options available Available controls: - ESA 640 2D 15'' touchscreen control ..... € 4,520 incl. - ESA 675 W 3D 21'' touchscreen control (Windows-based) ..... € 6,485 - DELEM 66 T 2D 17'' touchscreen control (Windows-based) ..... € 10,165 - DELEM 69 T 3D 17'' touchscreen control (Windows-based) ..... € 16,350 KK-Industries GmbH Lodpfx Alsd En Rxs Noaa There is something for everyone!

Stanje: novo, Pressure: 320 Bending length: 3020 mm Frame gap: 2555 mm Installation height: 650 mm Stroke length (max.): 400 mm Throat depth: 450 mm Dimensions (LxWxH): 3785 x 2290 x 3100 mm Weight approx.: 14,450 kg 4 axes (Y1, Y2, X, R): Yes, all axes via CNC control Delem DA 66 T (2D graphic control) CNC crowning via control: Yes, via CNC control Delem DA 66 T (2D graphic control) Motor power: 30 kW Standard equipment: KK Kletzer Europa We have assembled a high-quality model for the European market. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPA XL Laodoh Rwydopfx Al Nea The robust press brake EUROPA XL is characterized by its high precision, accuracy, and versatile range of applications. EUROPA XL offers a very large installation height and, consequently, a large stroke (cylinder travel). The throat depth is also above average, ensuring maximum flexibility. We focus on quality, which is also reflected in the control system. As a standard, we use the high-quality Delem DA 66 T (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R controlled via CNC. Naturally, the machine includes the CNC crowning control DELEM DA 66 T (2D graphic control). We also make no compromises with the upper tool and die, equipping the KKI EUROPA XL press brake with high-quality tools from EUROSTAMP Italy. Of course, every machine is only as good as its service. That is why we place emphasis on highly qualified staff with years of experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R axis Control: DELEM DA 66 T (2D graphic control) Backgauge with double linear guidance and ball screw spindle CNC-controlled motorized crowning device Heavy-duty design; height adjustment with handwheel on linear guides 3 pcs. backgauge fingers Installation height: 650 mm Throat depth: 450 mm Stroke: 400 mm Laser safety device on the upper beam CE safety equipment Various options available Additional controls: ESA 640 2D 15'' touchscreen control   ¤ 4,520 ESA 675 W 3D 21'' touchscreen control (Windows Base)   ¤ 6,485 DELEM 66 T 2D 17'' touchscreen control (Windows Base)   ¤ 10,165 incl. DELEM 69 T 3D 17'' touchscreen control (Windows Base)   ¤ 16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 220Bending length: 3020Frame gap: 2550Clear height: 600Stroke length (max.): 350Throat depth: 450Dimensions (LxWxH): 3745x2290x3055Approx. weight: 11,2504 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)CNC crowning via control: Yes, through the Delem DA 66 CNC controller (2D graphical control)Motor power: 22Technical specificationsXL 30220UnitBending length: 3020 mmBending force: 220 tLowering speed: 140 mm/sBending speed: 10 mm/sReturn speed: 130 mm/sStroke: 350 mmClear installation height / daylight (E): 600 mmThroat depth (D): 450 mmGap between frames (B): 2555 mmMachine length (L): 3745 mmMachine width (W): 2290 mmWidth without front stop (Y): 1720 mmMaximum height: 3055 mmMain motor: 22 kWOil tank capacity: 300 lMachine weight: 11,800 kg Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out thanks to its high precision, accuracy, and versatile application options. The EUROPA XL offers a very large clear height and, as a result, a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility with minimal limitations. We focus on quality, reflected in the machine’s control system. As a standard controller, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller. Naturally, CNC crowning is also integrated via the Esa S640 (2D graphical control). We make no compromises on the upper tooling and die either, equipping the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service support. For this reason, we put a strong emphasis on highly qualified personnel with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty design, height adjustment via handwheel; from 175 t up, heavy version on linear guide Laser protection system on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15" touchscreen control                                                        ¤ 4,520,-- incl. Lasded Edhlspfx Al Nja ESA 675 W 3D 21" touchscreen control (Windows based)                       ¤ 6,485,-- DELEM 66 T 2D 17" touchscreen control (Windows based)                    ¤ 10,165,-- DELEM 69 T 3D 17" touchscreen control (Windows based)                    ¤ 16,350,-- KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressing force: 40 Bending length: 1600 mm Distance between uprights: 1980 mm Motor power: 4 kW Ram stroke, max.: 150 mm Maximum opening: 370 mm CNC press brake 40x1600, 4 axes Y1-Y2-X-R with CNC crowning Technical parameters: Nominal press force: 63 kN Bending length: 1600 mm Distance between columns: 1980 mm Throat depth: 250 mm Ram stroke: 150 mm Maximum opening height: 370 mm Ram descent speed: 180 mm/s Ram return speed: 150 mm/s Ram operating speed: 15 mm/s Main motor power: 4 kW CNC system: ZY68 Ledpfewacq Eox Al Neaa Number of control axes: 4+1 Oil tank capacity: 90 L Back Gauge (X Axis): X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Motor power: 0.85 kW R-Axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repetitive positioning accuracy: ±0.015 mm Dimensions and weight: Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Additional motor power: 0.85 kW

Stanje: novo, Press force: 63 t Lsdsv Trgqspfx Al Njaa Bending length: 2500 mm Distance between uprights: 1980 mm Motor: 11 kW Ram stroke (max.): 150 mm Opening width: 400 mm CNC Press Brake KK Industries 63x2500, 4 axes Y1-Y2-Y-X-R with CNC Crowning Technical Specifications: Pressing force: 63 t Bending length: 2500 mm Distance between columns: 1980 mm Throat depth: 300 mm Ram stroke: 150 mm Maximum opening: 400 mm Ram approach speed: 180 mm/s Ram return speed: 170 mm/s Ram working speed: 14 mm/s Main motor output: 11 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 150 L Back Gauge: X-axis: X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeat positioning accuracy: ±0.015 mm Motor power: 0.85 kW R-axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeat positioning accuracy: ±0.015 mm Dimensions and Weight: Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hydraulic & control diagrams Parts lists CE certificate Lsdpfxjmpfwde Al Nsaa Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: novo, Oil tank capacity: 40 Bending capacity (flat material): 200 x 18 Laodjr I H A Hepfx Al Nja Bending capacity (round pipes): 60 x 4.0 Pressure: 30 Working speed: 10 Return speed: 10 Motor: 3 Table area: 660 x 1250 Working height: 930 Length: 1250 Width: 650 Height: 1250 Stroke: 285 Weight approx.: 1050 UZMA hydraulic horizontal presses with multidirectional functionality enable a wide range of operations such as bending, punching, straightening, etc., on pipes, flat bars, profiles, rods, and all types of materials. The quick tool change system allows for rapid forming of sheet metal, pipes, profiles, and rods with suitable dies, minimizing downtime. UZMA stands out for its versatile operation options and user-friendly controls. The horizontal bending press is an essential machine for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operating modes - Quick and easy tool change system - Durable tool and guide construction from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending dies

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Ledpfx Aonwt A Asl Nsaa Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Our strong brand KKKletzer CNC GUILLOTINE SHEAR, swing-beam design Model SWT provides everything needed for precise cutting operations. We have increased the standard in the swing-beam design as well, supplying our guillotine shears with automatic blade gap adjustment via touchscreen control E21S at no extra cost. Technical specifications: - Sheet thickness: 6 mm - Cutting length: 3,200 mm - Cutting angle: 1.5° - Motor power: 7.5 kW - Strokes per minute: 12 - Length: 3,800 mm - Width: 1,750 mm - Height: 1,700 mm - Weight: 5,100 kg • Robust swing-beam design • Blade gap adjustment via the control unit - Backgauge - Blade gap - Cutting length • Ball screw spindles for the backgauge • Balls embedded in the table for easy sheet handling We have numerous references!

Stanje: novo, Sheet length: 3060 Sheet thickness: 20.0 Total power requirement: 37 kW Weight approx.: 21,500 kg Dimensions (LxWxH): 3910x3395x2640 mm Our powerful brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3020 offers everything needed for perfect cutting. CNC swing beam shear by KKI With a robust, durable mechanical and hydraulic system, a precise backgauge with ball screw spindle, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and longer cutting lengths can be provided on customer request. Dener guillotine shears owe their long service life to their particularly robust, fully welded frame design. The entire machine body, shear beam, and backgauge are resistant to twisting and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and cutting gap. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3020 offers everything needed for perfect cutting. Technological advantages: Laedpfod Egqxox Al Noa - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 3013 offers everything needed for perfect cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, guaranteeing precisely high-quality cuts. The so-called banana cut is effectively prevented. Technical Data: Sheet thickness: 20 mm Cutting length: 3,060 mm Cutting angle: 0.5 - 3° Number of hold-downs: 16 Backgauge: 1,000 mm via CNC Motor power: 37 kW Cutting speed (0.5 - 3°): 12 - 5 (cuts/min) Throat depth: 350 mm Oil tank: 750 liters Length: 3,910 mm Width: 2,370 / 3,395 mm Height: 2,640 mm Weight: 21,500 kg • Swing beam design • CNC control system - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindles for the backgauge • Balls on the table • 1,500 mm side gauge • 2x support arms, 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard We have numerous references!

Stanje: novo, Sheet length: 3120 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 6500 kg Dimensions (LxWxH): 3850 x 2750 x 1700 mm Our strong brand KK Kletzer NC GUILLOTINE SHEAR, swing-beam design Model BS has everything you need for cutting. NC guide-rail guillotine shear KKI Technological Advantages: - Fast and precise cuts - Stable, durable frame construction - Easy operation - Low maintenance costs - High safety standard - Use of components from well-known manufacturers - Low unit costs Technical Data: Sheet thickness: 6 mm Cutting length: 3,120 mm Cutting angle: 1.39° Number of hold-downs: 15 Back gauge: 1,000 mm via CNC Motor power: 11 kW Cutting speed: 18 (cuts per minute) Throat depth: 150 mm Oil tank: 200 liters Length: 3,060 mm Width: 2,050 / 2,745 mm Height: 1,700 mm Weight: 6,500 kg • Stable swing-beam design • Blade gap adjustment via control panel - Back gauge - Blade gap - Cutting length • Ball screw spindles for the back gauge • Ball transfer table • Side stop 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Up-folding 1,000 mm finger guard Optional pneumatic sheet support, EURO 5,500 Ledpfxsd Eqrme Al Njaa We have many references!

Stanje: novo, Leto izdelave: 2020, Pressure: 135  Bending length: 3050 mm  Frame gap: 2550 mm  Installation height: 380 mm  Stroke length (max.): 180 mm  Throat depth: 250 mm  Dimensions (LxWxH): 3760 x 2150 x 2450 mm  Weight approx.: 6500 kg  Motor power: 11 kW Standard equipment: KK-Industries GmbH has been involved in production and now manufactures press brakes and guillotine shears according to its own specifications. For Europe, we have assembled a premium model: The CNC Press Brake KK Kletzer Europa Compact, made in Bursa, Turkey Model: KK Kletzer Europa Compact The powerful press brake for entry-level users—KK Kletzer Europa Compact—stands out for its high precision, accuracy, and versatile range of applications. We focus on quality, which is also reflected in the control system. As standard, we use high-quality controllers from Cybelec with extremely user-friendly programming. Furthermore, the KK Kletzer Europa Compact press brake is equipped with CNC axes Y1, Y2, X, and CNC-controlled crowning via handwheel option (EURO 2,000). We make no compromises when it comes to the upper tool and die, outfitting the CNC press brake with quality tools from EUROSTAMP or Rolleri (Italy). Naturally, every machine is only as good as its service. That’s why we place great emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Cybelec CybTouch 12 CNC control Cybelec CybTouch 12 Control Panel Simple operation, more efficient bending, and powerful features characterize the CybTouch 12 PS: The Cybelec CybTouch™ 8 PS is specifically designed for synchronized press brakes. As part of the Cybelec CybTouch series, it features an intuitive touchscreen with vivid colors and extensive functions integration. Efficient bending: - Various automatic calculations of bending sequences - Bending sets and products can be stored - Management of bend angles, pressure, and crowning - Simple manual movement Powerful: - Controls up to 4 axes - Optional 2D graphical profile creation with manual bending sequence - Bend allowance calculation - Calculation for pressure and crowning - Modular tools for each part or bend - Angle and backgauge correction Simple operation: - Large, bright, high-contrast full touchscreen - Clear page layout, easy display, large buttons - Intuitive, user-friendly interface - Full programming for high-volume production with complex bending operations - Easy single-piece production via the Easy-Bend page - Online help and interactive warning notifications - Convenient wireless data backup and software updates via PC or laptop - USB data port for data transfer and backup - Wide selection of languages Backgauge with double linear guideway and ball screw Central adjustable crowning device 2x front support arms, adjustable on linear guides Laser protection device on upper beam Ljdpfx Alsfnlqdj Neaa CE protective equipment Options: recommendation from KK

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW - 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil filling: 700 L Lsdpfxegta Rce Al Noaa Hydraulic double-column press 250 t KK Kletzer Capacity: 250 Tonnes (at 245 BAR) Operation: Via key switch - Manual/setup mode with two-hand operation, without light curtain - Automatic mode with two-hand operation, full speed with light curtain Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm Motor: 22 kW – 45 hp Pump: 103 L/min REXROTH – axial piston pump Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec Clear opening: 1100 mm Table plate: 1000 x 1000 mm, T-slotted Ram plate: 1000 x 1000 mm, T-slotted & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: - Block & valves (REXROTH) (hydraulic accessories mounted on top of press) - Pre-fill valve - Hydraulic & mechanical ram safety - Pressure adjustment via PLC (min. pressure 35 t) - Speed adjustment via PLC - Pressure holding valve for 600 sec. - Air cooler (temperature adjusted via screen) - Automatic lubrication for guides (adjustable via screen) - Sides of working area enclosed with sheet metal - Guide rails for parallelism - Auxiliary motors: 5.5 kW + 2.2 kW - Auxiliary pumps: 22 cc + 5.5 cc - Safety railing around hydraulics and side ladder - Oil tank: 800 liters - Oil quantity: approx. 700 liters Control system: - SIEMENS S7-1200 - Main switch cabinet - Movable control panel - Soft starter for motor - Safety PLC: SICK - PLC display 9’’ Siemens - Two-hand operation (movable) - Linear scale for stroke adjustment 450 mm – NOVOTECHNIK - Light sensor front & rear of working area – SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance – Siemens - Dual workspace lighting - 8 free I/Os on PLC - Automatic pressure compensation for oil loss Documentation: - Operating manual in German - Hydraulic circuit diagrams - Control schematics The price stated is approximate, as steel prices are subject to change.

Stanje: novo, Motor power: 13.2 Stand width: 2700 Pressure: 200 Bending length: 3200 Number of axes: 4 Dimensions (LxWxH): 3,700 x 1,700 x 2,700 Oil capacity: 200 Weight approx.: 14,000 Press brake control unit: Delem DA 58T 2D graphic display - touchscreen Lasdpfx Alopblztj Nea Control panel: Swiveling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Press brake laser safety system: DSP-AP safety block (manual laser height adjustment) Press brake back gauge: X-axis, 500 mm reach, including 2 fingers, manually adjustable in height and lateral position. Back gauge stop fingers: Standard Adjustable CNC crowning (V-axis), motorized Number of foot pedals: One Label set: English label set

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18 kW Weight approx.: 9,200 kg Dimensions (LxWxH): 4,000 x 1,900 x 2,350 mm Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. KK kletzer CNC-guided guillotine shear Featuring robust, durable mechanical and hydraulic systems, a precise CNC backgauge with ball screw, and a user-friendly CNC controller, KK kletzer guillotine shears are highly efficient production machines. Our standard portfolio covers shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available upon customer request. Their exceptionally sturdy, fully welded frame accounts for the long service life of our guillotine shears. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring maximum cutting quality. By entering the sheet thickness and material type, the CNC control automatically determines the required cutting angle and cutting gap. Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. Technological advantages: - Fast and precise cuts - Stable, long-lasting frame structure - Automatic cutting gap and angle adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from leading manufacturers - Low unit costs Technical data: - Sheet thickness: 13 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 – 2° - Backgauge: 1,000 mm via CNC - Motor power: 18 kW - Length: 4,000 mm - Width: 1,900 mm Lodpfx Aefl S Efjl Nsaa - Height: 2,350 mm - Weight: 9,200 kg Features: • Guided ram design • CNC controller ELGO P 40 T - Backgauge - Cutting angle - Cutting gap - Cutting length • Ball screw for backgauge positioning • Ball transfers in the table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard We have numerous references!

Stanje: novo, Sheet length: 3120 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 13,500 kg Dimensions (LxWxH): 3850 x 3160 x 2000 mm Our robust brand KK Kletzer NC GUILLOTINE SHEAR Swing Beam Type, Model BS, offers everything you need for sheet metal cutting. Technological Advantages - Fast and precise cuts - Rigid, durable frame construction - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 13 mm Cutting length: 3,120 mm Cutting angle: 2.5° Number of hold-downs: 15 Back gauge: 1,000 mm, CNC controlled Motor power: 30 kW Cutting speed: 12 cuts/min Throat depth: 150 mm Oil tank: 400 liters Length: 3,850 mm Width: 2,270 / 3,160 mm Height: 2,000 mm Weight: 13,500 kg • Stable swing beam design • Blade gap adjustment via controller - Back gauge - Blade gap - Cutting length • Ball screw spindles for back gauge • Ball transfer table • Side stop 1,500 mm • 2 pcs. support arms, 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Optional pneumatic sheet support, EURO 6,320.-- Laedped Eqrksfx Al Noa We have many references!

Stanje: novo, Sheet length: 4065 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 18,000 kg Dimensions (LxWxH): 4850 x 3160 x 2360 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 4013 offers everything needed for perfect cutting. CNC swing beam guillotine shear KKI Thanks to durable and long-lasting mechanics and hydraulics, a precise backgauge with ball screw spindle and user-friendly CNC control, Dener guillotine shears are highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, greater sheet thicknesses and cutting lengths are available on request. Dener guillotine shears owe their long service life to their particularly robust construction with fully welded frames. The entire machine body, cutting beam, and backgauge are highly resistant to twisting and deformation, thus ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade clearance. Our strong brand KKI CNC GUILLOTINE SHEAR swing beam design Model AS 4013 offers everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation Lajdpfxod Egque Al Nea - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low cost per piece Our strong brand KKI CNC GUILLOTINE SHEAR swing beam design Model AS 4010 offers everything needed for perfect cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, guaranteeing precise and high-quality cuts. A so-called banana cut is prevented. --- Technical Data: Sheet thickness: 13 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 21 Backgauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed (0.5 - 3°): 13–6 cuts/min Throat depth: 350 mm Oil tank: 400 liters Length: 4,850 mm Width: 2,350 / 3,160 mm Height: 2,360 mm Weight: 18,000 kg • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindles for the backgauge • Ball transfers in table • Side gauge 1,500 mm • 2 pcs support arms 1,000 mm each • Cutting line illumination • Pivoting finger guard up to 1,000 mm Optional pneumatic sheet support, EURO 8,420,-- We have many references!

Stanje: novo, Sheet length: 6125 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 35,500 kg Dimensions (LxWxH): 7090 x 3185 x 2650 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 6013 – everything you need for perfect cutting. CNC-guided guillotine shear KKI Thanks to a robust and long-lasting mechanical and hydraulic system, precise back gauge with ball screw drive, as well as a user-friendly CNC control, Dener guillotine shears are highly effective production machines. Shears for sheet thicknesses ranging from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, custom cutting thicknesses and lengths are available upon request. The long service life of Dener guillotine shears is owed to their particularly robust construction with a fully welded frame. The entire machine body, the cutting beam, and the back gauge are resistant to torsion and deformation, ensuring maximum cutting quality. By inputting sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 6013 – everything you need for perfect cutting. Technological advantages: - Fast and precise cuts - Sturdy, durable frame - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 6013 – everything you need for perfect cutting. With our patented blade support system, we are able to finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts. So-called banana cuts are prevented. Technical data: Sheet thickness: 13 mm Cutting length: 6,125 mm Lsded Ehh Dspfx Al Njaa Cutting angle: 0.5 – 2.5° Number of hold-downs: 31 Back gauge: 1,000 mm (CNC controlled) Motor power: 30 kW Cutting speed (0.5-2.5°): 11-5 (cuts/min) Throat depth: 350 mm Oil tank: 400 liters Length: 7,090 mm Width: 2,400 / 3,185 mm Height: 2,665 mm Weight: 35,500 kg • Swing beam design • CNC control: - Back gauge - Cutting angle - Blade gap - Cutting length • Ball screw for back gauge • Balls in worktable • 1,500 mm side gauge • 2 support arms, each 1,000 mm • Cutting line illumination • Flip-up finger guard (to 1,000 mm) Optional pneumatic sheet support system, EUR 12,650,-- We have numerous references!

Stanje: novo, Sheet length: 3100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 7000 kg Dimensions (LxWxH): 4110 x 2195 x 1770 mm Our strong brand KKKletzer CNC GUILLOTINE SHEAR in swing-beam design, Model SWT, has everything you need for cutting. We've raised the standard even with the swing-beam models and also equip our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control—at no extra charge. NC swing-beam-guided guillotine shear KKI Technological Advantages - Fast and precise cuts - Robust, durable frame construction - Automatic blade gap adjustment - Easy operation Ljdpfx Alsd Eqrno Nsaa - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 6 mm Cutting length: 3,100 mm Cutting angle: 1.5° Number of hold-downs: 15 Backgauge: 1,000 mm via CNC Motor power: 11 kW Strokes per minute: 16 Throat depth: 50 mm Oil tank: 200 liters Length: 4110 mm Width: 2195 mm Height: 1770 mm Weight: 7000 kg • Stable swing-beam construction • Blade gap adjustment via the control - Backgauge - Blade gap - Cutting length • Ball screw drives for the backgauge • Ball transfer tables • Side gauge 1,500 mm • 2 support arms 1,000 mm • Cutting line illumination • Flip-up finger guard to 1,000 mm Option: Pneumatic sheet support, EURO 3,900-- We have numerous references!