Grasselli Stroj Za Odstranjevanje Kože nakup rabljenega (100.728)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, proizvodna zmogljivost: 6.000 enota/h, Stroj deluje brezhibno in je bil ves čas pod nadzorom vzdrževalnega servisa podjetja Quadient. Zadnje poročilo o servisu iz decembra 2025 je priloženo! TEHNIČNE PODROBNOSTI Ndedpozzqabsfx Al Dsb Največja hitrost obdelave: 6.000 pošiljk/uro Največja hitrost obdelave dokumentov: 6.000 dokumentov/uro Največji mesečni volumen: 300.000 zaprtih ovojnic/mesec Največja debelina paketa: 10 mm Debelina paketa za minimalni prosti prostor: manj kot 3 mm Minimalni prosti prostor v globino pri debelini paketa manj kot 3 mm: 6 mm Minimalni prosti prostor v širino pri debelini paketa manj kot 3 mm: 16 mm Debelina paketa za povečan prosti prostor: 3–6 mm Minimalni prosti prostor v globino pri debelini paketa 3–6 mm: 12 mm Minimalni prosti prostor v širino pri debelini paketa 3–6 mm: 19 mm Kapaciteta posode za ovojnice do formata C5: največ 800 kosov Kapaciteta posode za ovojnice formata C4: največ 500 kosov Minimalna teža ovojnice do formata C5: 70 g/m² Minimalna teža ovojnice nad formatom C5: 90 g/m² Največja teža ovojnice: 110 g/m² Možnost nad polnjenja med delovanjem Minimalna širina ovojnice: 225,5 mm Največja širina ovojnice: 330 mm Minimalna globina ovojnice: 98,5 mm Največja globina ovojnice: 254 mm Minimalna dolžina zložke: 32 mm Največja dolžina zložke: 65 mm Minimalna globina pokrova ovojnice: 10 mm Največja globina pokrova ovojnice: 25 mm Minimalna odprtina v predelu pokrova: 70 mm Kot zložke: 50–90° Kot pokrova: 5–20° PODROBNOSTI O STROJU Število izvedenih operacij: 3.617.695 Napetost: 230 V AC Frekvenca: 50 Hz Varovalka glave za zapiranje ovojnic: 6,3 A Delovna temperatura: 18–28 °C Relativna vlažnost zraka: 30–80 % OPREMA Podajalnik Tower s 2 postajami CIS bralnik Bralnik Datamatrix Podajalnik prilog do formata A4 Modul za zapiranje ovojnic Transportni trak Preureditev s stikalom C4 Float Možnost lepljenja z destilirano vodo Primerna podstavna omara

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Ndodpfx Asw Emhfel Dob Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed conveyor and outfeed (wheel system) are included. In 2021, the rotor was completely replaced with a factory-refurbished rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be provided upon request.

Leto izdelave: 2023, stanje: novo, New GRS 4 Model – Special Offer for a Limited Time Only! Ndodpfx Aljk Ra Tuj Dob Previous Price: €1,100 net Now only €950 net while stocks last! Technical Specifications: Dimensions (W/H/D): 75 cm / 68 cm / 86 cm Weight: approx. 95 kg Colour: blue / yellow Separation Speed: approx. 48 meters per minute Motor: 230V / 3000 W Cable Diameter: hard cable 1.5 mm – max. 45 mm; rubber or soft cable up to 60 mm

Stanje: rabljeno, Stroj za odstranjevanje robov s ščetko, stroj za odstranjevanje robov s cevi RSA tip STL 1 Letnik: cca 1990 Premer ščetke: 250 mm Širina ščetke: 25 - 60 mm Ndedoxpqy Rjpfx Al Deb Število obratov: 1430 / 2870 obr/min Moč: 2 / 3 kW Priključek električnega omrežja: 380 V, 50 Hz - Podpora za material - Priključek za odsesavanje Ø 75 mm Mere D x Š x V: 650 x 550 x 440 mm Teža: 100 kg Dobro ohranjeno

Stanje: dober (rabljeno), Leto izdelave: 2011, Edges and contours - Deburring machine Ndodpfx Alownpflj Djb ROLEI Type: 00645-KKE2, year 2011.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1. postaja: odstranjevanje robnih srhov pločevine, 2. postaja: odstranjevanje srhov pri izrezih in zunanjih radijih, z VA krtačami; maksimalna debelina pločevine: 5 mm Ndodozwt Rbopfx Al Djb

Stanje: dober (rabljeno), Min.-max. tube length: 100–1800 mm The machine was previously used for deburring cut tubes! Njdpfoq U Rccox Al Djdb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Linija za obdelavo blagih jekel Lissmac SBM-M D 1500: Dvostransko odstranjevanje žlindre pri plazemsko in termično rezanih pločevinah do debeline 120 mm Nodszwlnrspfx Al Dodb SBM-XL 1500: Odstranjevanje ostrih robov in zaokroževanje robov delov do debeline 120 mm Sočasna obdelava obeh strani delov Odstranjevanje žlindre, odstranjevanje ostrih robov in zaokroževanje robov v enem prehodu Maksimalna delovna širina: 1500 mm Transportni trakovi 2 x 3000 mm in 3 x 4200 mm Maksimalna obremenitev 750 kg/m² Naprava za sesanje prahu ESTA DDE 8500, 7,5 kW Vključno z rezervnimi deli in potrošnim materialom Celotna linija ima manj kot 2000 delovnih ur Odlično stanje Na voljo za pregled.

Stanje: dober (rabljeno), RSA NC-V 2000 – strojno orodje za odstranjevanje ostrih robov + sistem za pranje cevi + filter Coral Celovit industrijski sistem za obdelavo in nadaljnjo obdelavo cevi Ndjdpfxozklb Es Al Dsb Sistem je sestavljen iz treh visokokakovostnih industrijskih komponent: 1. RSA RASAPLAN NC-V 2000 – zmogljivo strojno orodje za odstranjevanje ostrih robov Funkcija: Samodejno obdeluje dolžine obdelovancev do največ 2.000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – sistem za pranje cevi Funkcija: Izjemno robustna in dolgotrajna varjena konstrukcija iz nerjavečega jekla. Dodatna oprema: 3. CORAL IperJet DF4 – sistem za odsesavanje s kartušnimi filtri Zmogljivost: 4 horizontalne zmogljive kartušne filtre z v celoti avtomatiziranim čiščenjem s stisnjenim zrakom (zelo malo vzdrževanja). Funkcija: Zanesljivo odsesava prah od ščetin, ostanke brušenja ali pare iz sistema za pranje. RSA Rasaplan NC-V2000 je v celoti avtomatizirano zmogljivo strojno orodje za odstranjevanje ostrih robov s ščetkami, ki je zasnovano posebej za istočasno odstranjevanje ostrih robov na notranji in zunanji strani cevi in profilov v industrijskem procesu. Število „2000“ označuje največjo dolžino obdelovanca 2000 mm, ki jo je mogoče samodejno obdelati v standardni konfiguraciji. „Vse na enem mestu: z veseljem vam bomo ponudili primerno financiranje za vaš projekt.“ komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: rabljeno, Leto izdelave: 2023, Premer kolesa – maks. 200 mm Širina kolesa 60 mm Modul – maks. 5 Modul – min. 2 Masa obdelovanca maks. 6,0 kg Skupna potrebna moč 4 kVA Masa stroja pribl. 0,5 t Dimenzije D x Š x V 1,35 x 1,55 x 1,7 m Komaj uporabljena strojna oprema za čiščenje zob - 3-čeljustna vpenjalna glava ZG 125 - En obrat v 5–120 sekundah - Po pregledu je možen tudi modul 1,25 Ndsdpfx Aljzy Sats Dsb - Obdelovalna enota 1, izvedba: rezanje - Obdelovalna enota 2, izvedba: brušenje - Odsesavanje - Samodejni način delovanja

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, moč: 19 kW (25,83 KM), DM1100 DC EVO Odstranjevanje trdne žlindre Zaobljanje robov do širine 1100 mm. DM1100 DC EVO odstranjuje ostrine in zaobluje notranje in zunanje konture debelih jeklenih delov, ki so bili večinoma izrezani s plazmo ali plamenom. DM1100 DC je opremljen z velikim valjem za odstranjevanje ostrih robov in dvema protismerno vrtečima se prečnima pasovoma. Ti zagotavljajo zaobljanje robov z enakomernimi in mehkejšimi robovi. Ta stroj izstopa zaradi vertikalno premikajočega se brusilnega valja za izravnavo toleranc ter širokega magnetnega območja, ki omogoča varno obdelavo tudi majhnih delov. DM1100 DC Delovna zmogljivost (mm) 1100x120 Število brusilnih valjev (D) 1 Število postaj s prečnim pasom (C) 1 Specifikacije brusilnih valjev Ø435mm 20SH Dimenzije brusilnega pasu (mm) 1150x1520 Hitrost brusilnega valja (vrt./min.) 185-650 Hitrost prečnega pasu (m/s) 2-8 Hitrost podajanja (m/s) 0,5-4,0 Motor brusilnega valja (kW) 11 Motor prečnega pasu (kW) (2x) 3 Motor za podajanje (kW) 0,37 Skupna moč (kW) 19 Priključek za sesanje prahu na glavo (Ø mm) (2x) 150 Dimenzije (mm) 2258x2900x2220 Ndsdetzkg Uopfx Al Djb Teža (kg) 4100

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od oddaje naročila Država izvora: Italija Cena: 13.600 € Mesečni obrok ob finančnem lizingu: 261,12 € Delovna širina: 1300 mm Obseg debeline pločevine – jeklo: 150 mm Premer krtače: 150 mm Obseg vakuuma: 250 x 350 mm Višina mize: 945 mm Motor: 0,75 kW Dolžina: 1400 mm Širina: 1000 mm Višina: 1450 mm Teža: 300 kg Easy T je ročno upravljani stroj za odstranjevanje ostrih robov, ki je primeren za različne procese obdelave kovin, kot so brušenje, odstranjevanje ostrih robov, zaobljanje robov in poliranje različnih vrst materialov – nerjaveče jeklo, jeklo, baker, medenina in aluminij. Brušna glava z dvema vrtljivima orodjema (brušni disk ali krtača) je nameščena na vrtljivem ročnem nosilcu. Easy T je opremljen s prosto nastavljivo hitrostjo in vakuumskim sistemom, tako da se obdelovanci pritrdijo na mizo. To je stroškovno učinkovita in učinkovita rešitev za tradicionalno brušenje in odstranjevanje ostrih robov. Vse robove obdelovanca je mogoče obdelati iz vseh kotov in smeri. Brušna glava je vrtljiva za 180 ° in omogoča hitro zamenjavo brusnega orodja. Ndsdpfx Alswiryhe Deb Lastnosti: * Brušni tlak se izvaja ročno. * Enostavno upravljanje, nizki stroški. Segmentna krtača zagotavlja zaobljanje robov obdelovanca. Standardne krtače imajo premer 150 mm. Za odstranjevanje ostrih robov izdelka se uporablja podporna plošča z brušnim diskom. Odvisno od višine in trdote ostrega roba lahko brusni disk nastavite pod rahlim kotom, da izvajate večji pritisk na oster rob.

Leto izdelave: 1989, stanje: zelo dobro (rabljeno), Stock number:     2939 Manufacturer:     Held Year of manufacture:     1989 Machine number:     3356 Type / Model:     E90 Workpiece support surfaces:     800 x 50 mm Speed:     8,400 rpm Power connection:     1.1 kW Ndjdpfx Aleu Un N Ej Djb Accessories/Equipment:      Condition:     good Weight:     approx. 0.1 t Footprint:     550 x 500 mm Dimensions:     1,000 x 500 x 1,000 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, work table 450x300mm adjustable drilling height Ndodpfozz N Spex Al Dsb cast iron construction power supply 380V

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This machine, model KM13, cuts electric cables with a diameter ranging from 20 to 120 mm. The different diameters can be easily adjusted by turning the hand wheel up or down. The machine operates at a speed of 25 m/min. Its dimensions are: length 600 mm, width 600 mm, and height 1600 mm. The machine weighs approximately 200 kg. It is powered by a 380V-50Hz, 3 kW electric motor with a reduction gearbox. The cable is cut from both sides, allowing the copper core to be easily removed. Spare parts such as blades, drive components, bearings, etc. are available as well. If desired, we can also perform maintenance on these machines. This is a machine that is ready to use immediately and easy to operate. Ndedpjq E Ti Hsfx Al Dob If you would like to test it, please bring your own cable.

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. Ndjdpfxjtyqizs Al Dsb De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Ndedpfx Aot Hw Iiol Deb Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A deburring machine with extraction system is available. Passage width: 1000 mm, sheet thickness: 20 mm, minimum sheet size X/Y: 150 mm/100 mm, sound power level: 82 dB(A), feed rate: 4 m/min, dimensions X/Y/Z: approx. 2200 mm/1500 mm/1500 mm, weight: approx. 1600 kg, operating hours: 7152 h. Includes P. Ries 330 D Lissmac extraction unit, year of manufacture: 2007, filter area: 10 m², air volume: 3300 m³/h, negative pressure: 33 mbar. Documentation available. Ndodpfxjtul N De Al Djb

Stanje: rabljeno, Stroj pripravljen za delo, zmogljivost 2000 kg/uro. Vključuje tri vrste sit, stroj ima vgrajen predhodni drobilec zamrznjenih izdelkov. Namenjen za zamrznjeno sadje: črni ribez, rdeči ribez, kosmulje, slive. Oglejte si tudi moje druge oglase. Ndjdey Imymjpfx Al Deb

Stanje: dober (rabljeno), Lupilnik je odličen za lupljenje listavcev in iglavcev. Voziček je izdelan iz robustne jeklene konstrukcije. 4 pari pogonskih koles. Rezkalna roka iz težke jeklene konstrukcije. Hidravlična rezkalna glava. Motor z močjo 22 kW. Ndsdetuyr Iepfx Al Deb

Leto izdelave: 1990, stanje: dober (rabljeno), številka stroja/vozila: XXXX, Ref. No. 20314 Nsdjk H D Dfepfx Al Djdb Technical Data: - Steel – Stainless steel – Aluminium – Plastics, machining - Deburring and chamfering process performed with milling cutter - Support angle / chamfer angle adjustable - Chamfer angle adjustment: 15 to 45° - Chamfer width continuously adjustable: 0 to 7 mm - Length of guide rail: 500 mm - Speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required space approx.: W 650 x D 600 x H 950 mm - Weight approx.: 30 kg

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Rated power: 8 kW, weight: 2.2 t, with control cabinet. Ndodpfxeilht Us Al Dsb

Stanje: rabljeno, Model: David 200 naprava za odstranjevanje ščetine in plamenjenje Kapaciteta zakola: približno 40–50 prašičev na uro Primerno za prašiče do približno 270 kg Ohišje stroja iz vroče cinkane ali nerjaveče pločevine Vgrajena električna omarica Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Mere stroja (v cm): Nedpfx Ajtq T Tksl Dsdb Širina: 240 Dolžina: 340 Višina: 250

Stanje: rabljeno, Leto izdelave: 2012, Max. working width: 1000 mm Processable sheet thickness: 0.5 – 50 mm Rated current: 82 A Rated power: 44.5 kW Protection class: IP 42 Infinitely variable feed speed: 0–4 m/min Sheet thickness adjustment: electric Ndjdpfx Aljy Sp Hds Djb Tool adjustment: electric Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard Equipment Line consisting of an SBM-M 1000 D2 and an XL-1000, connected by two conveyors: SBM-M 1000 D2: Double-sided slag removal for plasma- and oxyfuel-cut sheets up to 120 mm Significant savings on tool costs due to mechanical slag removal – eliminates the need for time-consuming and costly grinding Double-sided slag removal eliminates the time-intensive flipping or double handling of often very heavy workpieces Up to 60% labor time savings compared to single-sided machines Modular, compact design in modern machine styling – minimal space required Dry processing The cross-processing principle ensures even tool utilization across the entire working width Upper and lower units are separately electrically adjustable and can be individually switched on/off Innovative tool and feed system allows optimal adaptation to warpage and workpiece tolerances Maximum productivity with consistent processing quality Improved working environment – reduced dust, dirt, and noise emissions Optionally available: conveyor systems, handling systems, robotics, automation, processing tools SBM-XL 1000: Deburring and edge rounding of workpieces up to 120 mm Double-sided processing eliminates the need for costly flipping or double handling of heavy workpieces Simultaneous deburring and edge rounding of internal and external contours Dry processing Simple, intuitive operation Processing units are electrically adjustable and individually switchable Maximum productivity with consistent machining quality Cross-processing principle provides optimal tool utilization across the entire working width Fast and easy tool change within a few minutes Modular, compact machine design with a small footprint Improved working environment – reduces dust, dirt, and noise emissions Optionally available: conveyor systems, handling equipment, automation, special solutions For recurring customer requirements, processing parameters can be quickly and easily recalled using predefined programs Up to 60% labor time savings compared to single-sided grinding machines Additional Equipment – Extraction system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: Ndedel Dw D Eepfx Al Deb 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg