Edge Zračni Separator nakup rabljenega (10.107)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Kodpfx Aor A Eq Reb Asdl Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Kdsdpfxohy Tlrs Ab Ajl Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Kdjdpfx Aec S Di Rsb Ael Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Kodpfx Aol D Rp Eob Asdl Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed Kedpfx Abolc Ewio Aedl End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included Kdodpfewiwnqex Ab Aol

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Kodsfbr S Ropfx Ab Aedl Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Kjdpebahd Eofx Ab Aedl Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. Kdjdpouxqzuefx Ab Aol • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Kjdpfx Aett Da Djb Aedl Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Oscilirajoči tračni brusilnik Močna izvedba za profesionalne obrtnike Električni priklop: 400 V Moč motorja: 3 kW Moč oscilacijskega motorja: 0,18 kW Dolžina traku: 2600 mm Širina traku: 200 mm Velikost mize: 930/300 mm Potrebni prostor: pribl. 1600/700 mm Teža: pribl. 280 kg Kdjdpfo Dxrgex Ab Ajl Naprava za krožno brušenje z oporno mizo: 400/250 mm Zagozdna letev z merilno skalo Agregat nagiben do 45° z ročnim kolesom Nastavitev višine mize z ročico Valji DM 120 mm Centralni priključek za odsesavanje DM 140 mm

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Kdodpfxoc Tmygs Ab Aol Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1997, Širina traku: 150 mm Dolžina traku: Velikost mize: Naprava za brušenje furnirja: da Osilacija: da Nagibna miza: da, 0°÷45° Priključek za odsesavanje: 120 mm Moč motorja: 3 kW Dolžina stroja: 1440 mm Širina stroja: 800 mm Kdodpfxsyffxzs Ab Asl Teža: 530 kg

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 2600 mm Oscillation: yes Kedoiuld Dspfx Ab Aedl Sanding rollers for curves: 1 Tiltable sanding unit: yes Table size: 750 mm x 290 mm Extraction port: 120 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 180 kg

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 51E361-010-02, IFE tehnologija predelave Letnik 2008 Na prodaj sta 2 enaka sita, vsak z 2 nezbirnimi motorji Cena je za 1 sito Kdedpexztbhsfx Ab Aol

Stanje: rabljeno, Leto izdelave: 2007, z utorom Debelina obdelovanca: 8 - 50 mm Debelina roba: 0,4 - 3 mm Fiksne dolžine: maks. 3 x 45 mm Podajalna hitrost: 11 m/min. Priključna moč: 10,5 kW Stisnjen zrak: 6 bar Teža: ca. 1250 kg Dolžina stroja: 3920 mm Lokacija skladišča: Dobavitelj Kdodey Tpz Dopfx Ab Aol

Stanje: rabljeno, Leto izdelave: 1993, Delovne širine: 150 ali 200 mm. Mize na strani ravninskega brušenja (nagibne navzdol 0-45°) in na strani furnirnega brušenja: 280 x 1000 mm. Miza pred napenjalnim valjem traku: 400 x 300 mm. Priključna moč: 3 kW. Oscilacijski hod: cca. 15 mm. Priključek za odsesavanje, premer: 150 mm. Teža: cca. 400 kg. Lokacija zaloge: pri dobavitelju. Kjdpfey Tpzwsx Ab Aodl

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Ksdpfx Aboyn Rmio Asdl Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm

Stanje: rabljeno, Izvlečevalnik oljne megle, Centrifugalni izvlečevalnik oljne megle, Rabljeni stroj Proizvajalec: Innovations-Center Ksdpfeyn Rkujx Ab Asdl Tip: Eonag 3000 Leto: 2010 Skupne dimenzije: 1000 x 570 x 1750 mm Električni podatki: 400 V; 50 Hz; 2,2 kW * 4000 m³/h * 84 dBA * 2800 l/min

Stanje: pripravljen za uporabo (rabljen), Koller Walzenmühle, Walzenmühle, Walzenschüssel-Mühle, Schüsselmühle, Schüssel­mischer, Gebrauchtmaschine Ksdpfxsuh Rkxj Ab Asdl Modell: Gebrüder Netzsch 205 ST; 251283 Abmessungen: 1400 x 1300 mm Gewicht: 735 kg Baujahr: 1965 Elektrische Daten: 400 V; 50 Hz; 4/2.9 A Steingröße: 500 x 150 mm Koller-Walzenmühlen sind speziell für eine hervorragende Mahlqualität in sämtlichen industriellen Anwendungen konzipiert. Ob für Mineralien, Getreide oder Lebensmittel – Koller-Walzenmühlen bieten Zuverlässigkeit und Langlebigkeit. Entscheiden Sie sich für Koller-Mühlen und profitieren Sie von hervorragender Leistung und dauerhafter Zuverlässigkeit!

Stanje: rabljeno, Manufacturer: Mineralwerke Type: PZ 250 M4 Voltage: 380 V Power: 55 kW Weight: 1,950 kg Kdodpfx Aoh D Hmveb Ael

Stanje: rabljeno, Ciklon za prah, separator prahu, HLZ-J 1600, rabljeni stroj Proizvajalec: HLZ-J 1600 Ksdpfx Abeyuzhwo Asdl Volumski pretok: 14.000 Bm³/h Sesalna stran: 400 mm Višina: 5.853 mm Premer: 1.695 mm Leto: 2013

Stanje: pripravljen za uporabo (rabljen), Celotne dimenzije: 2500 x 6000 mm Premer ciklona: 2500 mm Višina ciklona: 6000 mm Kodpewfrl Ajfx Ab Aodl

Stanje: rabljeno, Prašni ciklon, separator prahu, rabljeni stroj Skupne dimenzije: 1200 x 1150 x 3270 mm Vhodna stran: 280 mm Izhodna stran: 250 mm Kdodpfxoxt Tw Ho Ab Ael Višina cilindričnega plašča: 800 mm

Stanje: rabljeno, Leto izdelave: 1997, vklj. 3-valjni podajalnik, motor: 2,2 kW, električna oscilacija, hitrost traku: ca. 22 m/sek, po višini nastavljiva brusilna miza, velikost mize: 1000 x 350 mm, brezstopenjsko vrtljiv brusilni agregat od 0 do 45°, kotna skala in mehanska zapora, odpiranje naprave za brušenje furnirnih robov, aluminijast brusilni čevelj, po višini nastavljiva radijska brusilna miza, centralni priključek za odsesavanje: Ø 140 mm, brusilni trak: 3000 x 150 mm. Lokacija skladišča: Dobavitelj. Kodjy Dd Igspfx Ab Aodl