Dry Sorting Line 25 Bins Almab nakup rabljenega (27.906)

Leto izdelave: 2004, obratovalne ure: 24 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Linija za pranje špinače, rukole in druge listnate zelenjave Nsdpsrrvx Nsfx Agxjwf

Stanje: rabljeno, Linija za sortiranje hlodovine Hedlund 2x19 žepov Proizvajalec: Hedlund Število žepov: 2x19 Nwedpfx Agjyudlljxef Leto izdelave: 1980 Stopničasti podajalnik: Hedlund 2008 Krmilni sistem: Siemens S7 300

Leto izdelave: 2025, stanje: novo,

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: nepreverjeno, For sale: Holtec round log sorting line. The line includes a log conveyor for lengths up to 16 meters, a Cambio 66 debarker, a short log cutting system for long logs, a Bruks root swell reducer, and 20 log bins for lengths from 2.5 to 8 meters. The line was dismantled about two months ago and transported to our yard. Installation and commissioning at the customer's site is possible – all components are numbered. Very attractive price! For further information, please contact us. Nwjdpfx Agov Iv T Djxof

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete line for shredding and sorting electrical cables to recover copper. The line includes 3 shredding units: 1 pre-shredder (chopper) from Mocco or San Andrea, 1 Lancelin knife mill with 14mm screen and 22kW power, and 1 Dreher GS4562 mill with 8mm screen and 37kW power. Additional equipment includes a 5mm mesh screen, a magnetic pulley (ferrous separator), and a dry densimetric table. Processing and sorting capacity: 1 ton/hour. Currently set up for 8mm output material. Also suitable for other types of materials (plastics, glass, WEEE, wood, etc.). Nwjdpfx Ajtu Nq Tsgxjf

Leto izdelave: 2024, stanje: novo, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control Nwjdpfxegvu Alo Agxsf • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake • Spacious, thermally insulated control cabin • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Stanje: rabljeno, RSA RASACUT SC 3000 – Complete Automatic Line for Tube Cutting, Deburring, Length Control, Washing, and Drying This is a high-performance, fully integrated RSA line for tube processing, designed for continuous production: from raw tubes to finished tube sections at fixed lengths, up to 3,000 mm. The system covers the entire workflow: Package Loading → Cutting → Deburring → Measurement (Length Control) → Cleaning (Washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed-length cutting up to 3,000 mm · Complete RSA line: Package Loading + Cutting + Deburring + Measurement + Cleaning (Washing) + Drying Nwedpfoyllvyox Agxjf · Automatic tube singulation from bundle loader · Servo-controlled saw feed with programmable cutting parameters · Automatic, hands-free interconnection between stations · 360° deburring (internal + external) · 100% length measurement with automatic reject · Integrated washing and drying system for finished tubes · Siemens control: S7-300 + OP17 · Comprehensive set of clamping jaws included TECHNICAL DESCRIPTION 1. Bundle Loader Bundles are loaded into the storage by crane or forklift. The system automatically separates the tubes and feeds them onto the entry roller conveyor, enabling continuous processing for tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic cutting unit with servo-controlled feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length. Cutting parameters are fully adjustable for consistent, repeatable results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous internal and external deburring on both ends. Adjustment is fully automatic from the central control panel. 4. Measurement | RSA RASACHECK 3000 A Integrated length measurement station with 100% control of finished parts. Out-of-tolerance pieces are automatically rejected, ensuring only in-spec tubes progress to subsequent stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed to thoroughly remove chips and contaminants. Tubes pass through a closed washing zone where cleaning fluid is applied under pressure and contaminants are collected in a chip filter. 6. Drying | TURBODRY Hot air drying station with adjustable airflow and temperature. Removes droplets and condensation after washing, delivering fully dry tube sections for further handling. 7. Tooling | Comprehensive clamping jaw set Supplied with a wide range of clamping jaws for various tube diameters, allowing quick changes without additional tools. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Maximum input tube length: 8,000 mm · Finished (fixed) cut lengths: 150 to 3,000 mm (up to 2,000 mm for Ø 10–14 mm) · Tube weight: max. 10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm: ±0.2 mm | Ø50–74 mm: ±0.25 mm | Ø75–90 mm: ±0.3 mm In production (machine operational). Contact us for a quote, full information, or to arrange a visit...

Stanje: pripravljen za uporabo (rabljen),

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Renholmen linija za sortiranje zelenega lesa z 45 sortirnimi žepi, stroj za vstavljanje s samodejnim rokovanjem z letvicami in Finnscan + OT-laite, hitrost 100 m/min, popolnoma avtomatizirana linija z enim upravljalcem za rokovanje z letvicami, avtomatizacija izvedena leta 2019. Največja dolžina obdelovanca: 6.100 mm. Največja hitrost sortiranja: 130–150 kosov/min. Največja zmogljivost: 260.000 m3/leto. Nedpfx Agjxg Rgxexewf

Stanje: rabljeno, Ena preprosta kombinirana sortirna linija z 10 žepki na traku in zmogljivostjo do 40 kosov na minuto. Nsdexyaivspfx Agxswf

Stanje: rabljeno, Zelena horizontalna linija za sortiranje desk IDC000060 - Proizvajalec: Almab - 4 žepi Nsdpfx Agjtk Hnbjxswf - Obrezovalnik - Zlagalnik z distančniki - Avtomatizacija Nolyx – 2018

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Črpalna linija za zeleno razrezano hlodovino, 4 vodoravni sortirni žepi, 4 medpomnilni žepi, obrezovalnik, zlagalnik, operacijski sistem Nolyx (nov v letu 2018), hitrost sortiranja 16.000 kosov v 8-urni izmeni. Nedpjtxzhlsfx Agxswf

Stanje: rabljeno, Leto izdelave: 1982, Rabljena linija za razrez traku FIMI 1250×0,12-0,8 mm x16t z dvema pakirnima postajama (A3793) je linija za obdelavo kovinskih kolutov za razrez na pločevine zahtevanih dimenzij. Takšna naprava je odlična rešitev za podjetja, ki se ukvarjajo z razrezom in predelavo kovinskih trakov. Proizvajalec: FIMI – Italija Leto izdelave: 1982 Obnova: 2008 (SEI SISTEMI) in 2019 (SEI SISTEMI) CE označba: 2019 Material pred obdelavo: Največja širina koluta: 1250 mm × 0,12 do 0,80 mm Kapaciteta navijalca: 16 ton Dimenzije izsekov: min. 300 × 500 mm – max. 1250 × 2000 mm Delovna hitrost: 0–120 m/min SEZNAM STROJEV SESTAVLJAJOČIH LINIJO: ➢ Nakladalna rampa za 2 koluta ➢ Dvigalo za kolut na navijalec ➢ Navijalec s segmenti premera 400 in 508 mm ➢ Prijemalni valj za dovod traku v ravnalec ➢ 6HI-ravnalec z izmenljivimi garniturami valjev: – 1 garnitura za debelino 0,12 ÷ 0,50 mm – 1 garnitura za debelino 0,50 ÷ 0,80 mm ➢ Povezovalna miza med ravnalcem in prijemalnim valjem ➢ Prijemalni valj ➢ Spuščajoči transportni trak v zanki ➢ Dvigajoči transportni trak iz zanke ➢ Prijemalni valj z motornimi valji ➢ Centrirna naprava s pokončnimi valji ➢ Merilnik debeline tipa elektronska tipkovnica ➢ Rotacijske škarje ➢ Obrnjen transporter za odvod ostankov in delov okvarjenih trakov ➢ Zbiralna škatla za porezke in okvarjene dele trakov Nwodpfx Agjttlfksxef ➢ Obrnjen transporter za odvod odpadkov in delov okvarjenih trakov v prvo in drugo zbiralno škatlo ter sestavo skladov ➢ Povezovalni transportni trak in odsek za transport pločevin v tretjo škatlo ➢ 3 iztovalni vozički za transporte skladov do transportnega traku ➢ 1 izhodni transportni trak za pakiranje ➢ Hidravlična oprema za celotno linijo ➢ Pult za uvodno upravljanje traku na vstopu v linijo za razrez kolutov ➢ Glavni upravljalni pult za vse operacije linije ➢ Upravljalni pult na izstopu iz linije ➢ Električna omara z vsemi električnimi in elektronskimi komponentami ter PLC ➢ Fotocelice in varnostne zaščitne pregrade.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Hoerbiger Origa P120S-25 linearni aktuator. V dobrem delovnem stanju. Nwodpfx Aetwqp Asgxsf Oglejte si tudi naše druge oglase.

Stanje: rabljeno, Leto izdelave: 1990, Hersteller: SALICO S.P.A. Baujahr: 1990 Blechdicken: 3-13,5 mm Coil-Kapazität: 25 t Coilbreite: 320–1.250 mm Laufrichtung: Links–Rechts Linienabmessungen: 17 x 13 m Nwjdpjurlakjfx Agxsf Maximaler Außendurchmesser: 2.000 mm Minimaler Außendurchmesser: 700 mm Minimaler Innendurchmesser des Coils: 500 mm Maximaler Innendurchmesser des Coils: 600 mm Messerdurchmesser: max. 460 mm, min. 410 mm Absolute Schnittanzahl: 15 Anzahl der Schnitte bei maximaler Dicke (13,5 mm): 3 Schnitte bei hartem Material, 5 Schnitte bei weicheren Materialien.

Stanje: dober (rabljeno), Linearni ležaj, linearna tirnica, linearno vodilo, vodilna tirnica z valjčki, vodilni voziček, vodilna tirnica, voziček z valjčki -Proizvajalec: igus DryLin T, vodilna tirnica z 2 vodilnima vozičkoma DryLin T -Vodilni voziček: tip TW-01-25 -Dolžina tirnice: 300 mm -Širina tirnice: 34 mm -Količina: 6x linearno vodilo na voljo -Cena: na kos -Transportne dimenzije: 300/70/35 mm -Teža: 1,0 kg/kos. Njdpfx Aoxlppijgxowf

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, delovna višina: 520 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shaped parts according to Lisec form catalogue, and four-side stacked units: - RTVN-32/25WE, infeed conveyor (3.2 m length), year of manufacture 2007 (!) - RTL-25VN, with 6 brushes for Low-E, including 1 hot water tank, 1 sand filter, and 1 blower, year of manufacture 2007 (!) - RTVN-16/25ST, outfeed conveyor (1.6 m length), year of manufacture 2007 (!) - RSVN-38/25A, frame section, year of manufacture 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 - RTVN-11/25ST, infeed conveyor for gas filling press (or extension for measuring zone), year of manufacture 2001 - FPS-36/25U2T, gas filling press for argon, year of manufacture 2001 - RTVN-16/25ST, outfeed conveyor 1 for gas filling press, year of manufacture 2001 - RTVN-16/25ST, outfeed conveyor 2 for gas filling press, year of manufacture 2001 - APKV-25/2, twin-lane cork applicator, year of manufacture 2001 - RTVN-15/25VFE, conveyor for sealing robot, with glass and frame measuring device plus barcode reader for shaped units, year of manufacture 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), graduated elements (bottom 0–50 mm, front, rear, and top 0–140 mm) as well as special shapes according to Lisec special form catalogue, Beckhoff PC, year of manufacture 2001 - DOS-1PUD + SID, dosing system for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Nsdpfx Aey Exuwogxowf All machines were fully functional until dismantling and are now available ex-stock Hofkirchen/Austria and ex-stock Oroshaza/Hungary.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Lisec insulating glass line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, inlet extension for washing machine, year of manufacture 1990 - RTV-38/25WE, washing machine inlet with glass thickness measurement and automatic low-E detection, year of manufacture 1990 - VHW-25V8, washing machine with 8 brushes for low-E, including 2 sand filters, 2 hot water tanks and blower, year of manufacture 1990 - RTVN-32/25ST, washing machine outlet, year of manufacture 2001 - RSVN-38/25A, frame assembly station, year of manufacture 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 - RTVN-11/25ST, press inlet (or extension for measuring zone), year of manufacture 2001 - FPS-36/25U2T, gas filling press for Argon, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - APKV-25/2, 2-track cork applicator, year of manufacture 2001 - RTVN-15/25VFE, sealing line infeed, with glass and frame scanning as well as special shapes barcode reader, year of manufacture 2001 Nedpfeyztayex Agxswf - VFL-1DS/25, automatic sealing system, including options for triple units (2 sealing passes), stepped units (bottom 0-50 mm, front, rear and top 0-140 mm), and special shapes in accordance with Lisec special shape catalogue, Beckhoff PC, year of manufacture 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Available now from our warehouse in Hofkirchen/Austria

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, Jorns Norma Line Delovna širina: 6,00 m Zmogljivost upogibanja: 1,0 mm Leto izdelave: 1989 Zaslon nadgrajen Nwsdey Drfaspfx Agxsf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Max Photonics, laserska moč: 3.000 W, valovna dolžina laserja: 1.080 nm, najv. debelina jeklene pločevine: 22 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 12 mm, širina mize: 1.300 mm, potovalna razdalja osi X: 2.550 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 120 mm, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 3.500 kg, širina odprtine vrat: 2.600 mm, višina odprtine vrat: 1.000 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, kabina, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, New laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, and at the same time cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing and hire purchase offers. - Machine without automatic shuttle table - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.0 meters of installation area - 3kW laser source from MaxPhotonics (G5/German edition), suitable for aluminum Nwedpfexa Ahnex Agxof - Top quality, schedule a viewing now! Cutting thicknesses: - Steel sheet up to 22 mm - Stainless steel sheet up to 12 mm - Aluminum sheet up to 12 mm - Brass sheet up to 5 mm - Travel range 1260 x 2550 mm (medium format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection window for monitoring the cutting process - 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter file - Nesting module included - Very easy to operate - High-performance laser chiller - Machine control in German - German service and spare parts supply - High-performance laser chiller - Filter extraction optionally available (5.5 kW with frequency inverter for pleasantly quiet operation) Leasing or hire purchase is possible via our financing partner. Sale is exclusively to business customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0 m Height: 2.3 m Width: 4.0 m Total weight: approx. 3500 kg Need a different laser output, table type, or size? No problem. I am happy to provide you with a suitable offer. For example, 2kW machine starting at €29,990 Not sure which laser output is right for your application? Of course, I will carry out cutting trials based on your requirements. There is a lot of flexibility here.

Leto izdelave: 2015, obratovalne ure: 1.378 h, stanje: skoraj kot novo (rabljeno), Znamka: COLLIN Lab & Pilot Solutions GmbH Tip: ZK 25 kompounderska linija Serijska št.: 5251-38-15 Leto izdelave: 2015 Delovne ure: 1.378 Premer vijaka: 25 mm Razmerje L/D vijaka: 48 Nwodpfxoyzp Sxo Agxsf Priključna moč: 36 kW Dimenzije (D׊×V): 5.000 x 1.200 x 2.200 mm Teža: 1.350 kg Konfiguracija linije: – 2x gravimetrični dozirni sistemi Coperion – 1x stranski dovod z dvema možnima položajema – 2x doziranje tekočin – 1x odprtina za prezračevanje z vakuumsko črpalko – Matrica za filament z 1 odprtino – Matrica za filament s 4 odprtinami – FECON sistem za nadzor procesnih podatkov – Silikonski transportni trak z aktivnim hlajenjem z zrakom – Granulator s prilagodljivo hitrostjo Drugo Vsa dokumentacija je na voljo v nemškem jeziku. Drugi jeziki na zahtevo.

Leto izdelave: 2004, stanje: rabljeno, High-performance band resaw Möhringer / Braun Canali Model: multi-line TB 1250 MF-20 Roller diameter: 1250 mm Roller width: 150 mm Saw blade speed: 28–50 m/s Connected load: approx. 45 kW Nwjdpfsdfcv Ijx Agxsf Feed rollers: 2x4 Roller height: 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width: 250 mm to the left of the saw blade and 250 mm to the right of the saw blade with center cutting device Complete technical documentation Original photos to follow

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer 13. Supply air unit for hall, 30,000 m³/h Nwjdpfxju Afu Rs Agxef Further information: On request

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.910 mm, skupna dolžina: 13.860 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435 / 50 / R19.5, medosna razdalja: 8.940 mm, barva: bela, Leto izdelave: 2012, Splošne informacije Modelna koda: ## Konfiguracija osi Dimenzija pnevmatik: 435 / 50 / R19.5 Znamka osi: BPW EcoPlus Nsdpfjyvf A Usx Agxswf Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Maks. obremenitev osi: 9000 kg; Profil pnevmatik levo: 25 %; Profil pnevmatik desno: 25 % Zadnja os 2: Maks. obremenitev osi: 9000 kg; Profil pnevmatik levo: 25 %; Profil pnevmatik desno: 25 % Zadnja os 3: Maks. obremenitev osi: 9000 kg; Profil pnevmatik levo: 25 %; Profil pnevmatik desno: 25 % Teže Lastna teža: 7.550 kg Nosilnost: 33.450 kg Skupna dovoljena masa: 41.000 kg Zgodovina Število lastnikov: 1 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Varnost proizvoda Proizvajalec: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Stanje: novo, lastna masa: 7.607 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Krone zabojni polpriklopnik Dry Liner SDK 27 eLB41-LI | Nosilec rezervnega kolesa, orodjarna | Dvostopenjski | Krone osi z disk zavorami | Dvižna os | Pnevmatske gume: 385/65 R22.5 | Dimenzije: V: 2,7 m Š: 2,48 m | Pridržujemo si pravico do napak in predhodne prodaje. Nedpexaqc Tofx Agxowf