Axe & Status Es 3006 nakup rabljenega (12.065)

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 10/2011, vzmetenje: zrak, velikost pnevmatike: 425/65r22.5, medosna razdalja: 1.420 mm, Leto izdelave: 2011, Uporabni material: beton Nodpfx Aljuczfvetold Dimenzija pnevmatik: 425/65r22.5 Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Pogon: kolesni Lastna masa: 8.720 kg Nosilnost: 24.280 kg Skupna dovoljena masa: 33.000 kg

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: Nlsdey Up S Sjpfx Altod * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, Leto izdelave: 2007, Extendable body: Yes Nljdpfx Aleyrtm Hsted Please contact Theo Lelie for further information.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, skupna dolžina: 13.400 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 9.800 mm, barva: bela, Leto izdelave: 2007, Oprema: ABS, SAF axle. 2 x steered trailing axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. Nsdpfx Aley N Aw Rstold = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 2: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 3: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 4: twin tires; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight: 47,600 kg Identification Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights can be derived from the published texts.

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2124, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.375 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, največja hitrost vretena: 4.000 obr/min, 5-osni stroj Velikost palete: 800*800 mm Avtomatska menjava obdelovanca: 5 palet CNC upravljanje FANUC 15M Vreteno 22 kW – 4000 obr/min FANUC Pogonski motor osi (20 m/min) + pogon: FANUC Revija za orodje: 118 orodij tip 50 DIN 69871 Nlodpjyzxyxefx Altjd

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Nsdpfx Aljy Auhzotjld Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Nedpfxoyz E T Ss Altsld Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: rabljeno, številka stroja/vozila: W09BLH3556EE32123, Leto izdelave: 2006, Contact Theo Lelie for further information. Nledpfxey Dgkqe Alted

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: Nljdpfx Aewx Dctsltjd - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Nlodpsw U H Sbefx Altsd Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: zelo dobro (rabljeno), prva registracija: 08/2010, barva: zelen, Leto izdelave: 2010, Oprema: ABS, = Additional Options and Equipment = - Central lubrication system = Further Information = Nlodpfx Alouxycuotsd Extendable body: Yes Technical condition: very good Visual condition: very good Price: On request KAMAG K22 MODULE 12 AXLES WITH GREINER LOWBED FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE. WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2018, barva: rdeča, Leto izdelave: 2018, Oprema: ABS, = Further options and accessories = - Air suspension = Further information = Rear axle 1: Twin tires Rear axle 2: Twin tires; Steerable Unladen weight: 8,940 kg Loading platform height: 90 cm Nledpfsux Ad Usx Altsd Extendable body: Yes Technical condition: very good Optical condition: very good Price: On request DANSON HLB45 2-AXLE EXTENDABLE SEMI LOWLOADER 2X SAF AXLES 1X STEERING AXLE (SELF-STEERING) TIRE SIZE 245/70/R17.5 EXTENDABLE LOADING PLATFORM LENGTH 740 CM + 500 CM EXTENDABLE, TOTAL LOADING PLATFORM LENGTH 1240 CM LOADING PLATFORM WIDTH 255 CM + 2X 102.5 CM EXTENDABLE, TOTAL LOADING PLATFORM WIDTH 460 CM !!! PLATFORM HEIGHT ± 90 CM GOOSENECK 40 CM LENGTH LASHING EYES, ROPE POTS, TWISTLOCKS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Največji premer zobnika: 400 mm Širina zobnika: 76 mm Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Modul: maks. 6 mm Teža stroja: približno 7500 kg Nodpjwvbqisfx Altsld Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 42.503, vpenjalna sila: 4.000 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 1.481 letvica, injekcijska masa: 1.040 g, skupna masa: 5.600 kg, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! TEHNIČNE PODROBNOSTI Zaključna sila: 4.000 kN Velikost pritrdilne plošče: 1.300 × 1.080 mm Minimalna višina orodja: 350 mm Maksimalna širina odprtine: 1.300 mm Premer vijačnega valja: 70 mm Volumen vbrizga: 1.155 cm³ Masa vbrizga: 1.040 g Tlak vbrizga: 1.481 bar PODROBNOSTI O STROJU Električno-hidravlična oprema Nazivna moč črpalke: 45 kW Dimenzije in teža Dimenzije (D × Š × V): približno 8.000 × 2.250 × 2.200 mm Teža: približno 5.600 kg Nlodpfx Alszncmtjtjd

Stanje: rabljeno, Leto izdelave: 2006, najv. debelina pločevine: 6 mm, Make: DURMA Model: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm Nljdpfxjwrx Tao Altod

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Nlodjdvn Hwopfx Altjd Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: rabljeno, Leto izdelave: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing milling unit, including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station, radius R 2.5 mm Technical description: - With hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutters (combination design) and fine adjustment from the operator side - Free mounting positions for additional machining units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece feed - Robust chain drive - Ergonomically positioned control panel - Double roller upper pressure beam - Viewing windows for machining units from the rear and operator side - PLC control system including touchscreen Technical data: - Feed speed: 10 m/min - Panel thicknesses: 8–40 mm - Weight: approx. 1,550 kg depending on configuration - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic incl. cooling and antistatic spraying unit, year 2014 1 unit hot-air aggregate for creating the optical zero joint using specially designated edge materials - Including pneumatic glue pot positioning - Including cooling and antistatic spraying unit - Including 2 additional edge channels in quick-change design - Including special edge rounding unit, maximum workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Can be retrofitted later – additional costs upon request Technical data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2–2.0 mm - Feed speed: 7–10 m/min - Air consumption: approx. 280–580 l/min (Airtronic only), electronically controlled - Ready for operation in approx. 2 min Special design: minimum workpiece thickness 8 mm 1 unit Airtronic retrofit for PLC-controlled machines available on request 1 unit retrofit only possible at the factory in Hüllhorst–Oberbauerschaft Upgrade to 8 mm edge thickness 1 unit for maximum workpiece thickness of 40 mm, including pneumatic saw adjustment Special infeed fence for overloaded panels 1 unit for 16 mm and 19 mm thicknesses, maximum veneer overhang 8 mm Separate pneumatic cutter adjustment 1 unit, controllable from the operator panel (straight/radius) Buffing station (swab) 1 unit Corner rounding unit 1 unit, including combination tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Ball bearing for corner rounding cutter 24.1 mm 1 unit Ball bearing for corner rounding cutter 24.2 mm 1 unit Nljdpjznldhjfx Alted Corner rounding cutter for 60 mm workpiece thickness 1 unit quick-change device for corner rounding unit 1 unit exchangeable motor 0.37 kW for corner rounding unit 1 unit including terminal box with attached electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or alternatively cycle counter, including cutter R 1.0 mm Ball bearing 24.1 mm for corner rounding unit 1 unit ball bearing 24.2 mm for corner rounding unit 1 unit radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm Radius scraper 1 unit including pneumatic lifting device, radius R 1.0 mm Flat scra

Stanje: rabljeno, Leto izdelave: 2018, Strobna naprava AKV 3006 DK - F s agregatom za obdelavo spojev, vključno z DIA orodji. Debelina spoja do 40 mm, debelina obdelovanca do 3 mm. Kombinirana rezkalna postaja, polmer R 2,5 mm. Tehnični opis: nanašanje talilnega lepila na obdelovanec za robne materiale do 3 mm. Debelina obdelovanca 60 mm brez agregata za obdelavo spojev, 40 mm debelina obdelovanca z agregatom za obdelavo spojev. Ne zahteva vzdrževanja, prevlečen rezervoar za lepilo, HF postaja za obrezovanje (16.000 vrt/min) za sprednji in zadnji robni preveč. HF rezkalna postaja (16.000 vrt/min) z zamenljivimi rezalniki (kombinirana izvedba) in fino nastavitev rezkalnika s strani operaterja. Prostor za dodatne obdelovalne agregate (sistem Hebrock). Hitrost podajanja približno 10 m/min. Nastavitev globine reza na obrezovalni žagi. Signalna luč za vrstni red obdelovancev, robusten verižni pogon, ergonomska razporeditev upravljalne plošče. Dvojni valjčni pritisk, okno za pregled agregatov z zadnje in operaterske strani stroja. SPS krmilnik vključno s zaslonom na dotik. Tehnični podatki: - Hitrost podajanja 10 m/min. - Debelina plošče od 8 do 40 mm. - Teža: odvisno od opreme, približno 1550 kg. - Dimenzije (D x Š x V) 5250 x 1445 x 1600 mm. Airtronic vklj. napravo za hlajenje in antistatično pršenje (2014, 1 kos). Agregat za toplo zračno pištolo za ustvarjanje optičnega spoja z uporabo posebnih robnih materialov. - Vklj. pnevmatsko pozicioniranje rezervoarja za lepilo. - Vklj. napravo za hlajenje in antistatično pršenje. - Vklj. 2 dodatna robna kanala v izvedbi s hitro menjavo. - Vklj. specialna izvedba, rezalnik za obdelavo robov, maksimalna debelina obdelovanca 60 mm, minimalna dolžina obdelovanca 200 mm. - Izključno za stroje Hebrock serije 3000. - Naknadna vgradnja je možna – dodatni stroški na zahtevo. Tehnični podatki: - Maksimalna debelina plošče 40 mm. - Maksimalna debelina roba 1,2 – 2,0 mm. - Hitrost podajanja 7 – 10 m/min. - Poraba zraka približno 280 – 580 l/min (samo Airtronic), elektronsko upravljano. Nledjx S Hmzspfx Alted - Pripravljen za delo v približno 2 minuti. - Nadgradnja na 8 mm debelino roba (1 kos) do maksimalne debeline obdelovanca 40 mm. - Vklj. pnevmatsko nastavitev žage. - Specialna izvedba, minimalna debelina obdelovanca 8 mm (1 kos). - 3-točkovna pnevmatska nastavitev rezkalnika (1 kos). - Preklop polmer – poševni rob – poravnan za kombinirane rezkalne postaje. S tem se izognete ročni nastavitvi na kombinirani rezkalni postaji za 3. oporni točki. SPS krmilnik je nujen. - Postaja za čiščenje (1 kos). - Rezalnik za obdelavo robov (1 kos), vklj. kombinirano orodje in pnevmatsko nastavitev poševnega roba/polmera, maksimalna debelina obdelovanca 40 mm, minimalna dolžina obdelovanca 300 mm, polmer R 2,0 mm. - Rezkalnik za obdelavo robov (1 kos), vklj. pnevmatično napravo za nastavitev, polmer R 2,0 mm. - Površinski rezkalnik (1 kos) z pnevmatičnim upravljanjem. - Vozni podstoj (1 kos). - Sistem za menjavo postaje za lepljenje, vklj. izhod za lepilo navzdol (v pripravi), 1 kos, brez drugega rezervoarja za lepilo - vklj. možnost obdelave PU lepila na stroju. - Agregat za rezanje letvic, vertikalno v ploščo (1 kos), vklj. pnevmatično napravo za nastavitev, vertikalna rez, širina utora 8,2 mm, globina utora 8,0 mm, razdalja od roba obdelovanca 14,0 mm. - Specialna izvedba, motor za rezanje letvic z večjo močjo (1 kos). - Vsesavanje iz agregata za obdelavo spojev, notranje (1 kos) na razdelilniku sesalnega sistema stroja. - Ležaji za rezkalnik za obdelavo robov, 24,1 mm (1 kos).

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, TECNOVA MINI / 60 reciklačni stroj za regranulacijo Tip: ES 60 N / 35D DEG Leto izdelave: 2002, malo rabljen, v celoti obnovljen leta 2023. Razpoložljivost: takoj. Trenutno stanje: Možen ogled v delovanju. Vijak: 60 mm, razmerje L/D: 35, Zmogljivost: 120-140 kg/h, Dovajalni polž: da, Sistem za odzračevanje: da, Tip rezalne glave: rezalnik na glavi, Primerni materiali: PE/PP/PS. Druge specifikacije: 8 mm premer granulatov, Maks. vlaga: 3 % Silos za folijo, kapaciteta 2 m3, Vakuumska črpalka za odzračevanje, Nadzorna plošča za temperaturo, Nadzor tlaka, Vodno hlajenje, transport, Venturi, ciklon in cevi, Dimenzije: 6,40 m dolžina x 2,10 m širina x 4,30 m višina Vgrajena moč: 30 kW. + granulator folije Meccanoplastica Tip 3140 (1998) !!! Cena vključena!!! Prodaja se vključno z rezervnimi deli: polžna cev, grelni elementi, menjalnik filtrov, izolacija rezalne glave, noži za mlin, kompaktor, ležaji silosa, ciklon, rezalna glava. Nodpfx Asw U Swpoltold

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Nadzor: ne Hecht ES 350, enostranska žaga za steklene profile ----- Nagibanje s pomočjo pnevmatskega sistema proti fiksnim oporami. 45º/90º/135º Nlsdpjvpr N Rofx Altod z pnevmatskim podajanjem žaginega lista pnevmatsko nagibanje s pomočjo ročnega nagibnega sistema z osnovo stroja, pnevmatsko napenjanje Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala žage: dolžina 700 mm, globina 1600 mm, višina 1500 mm Nastavljiva opora 1,5 m Podpora 1,5 m s podstavkom Nastavljiva opora 3 m Podaljšek podpore od 1,5 m na 3 m s podstavkom Vložki mize z utori za obdelane steklene profile HECHT ASB, ročna dolžinska opora z digitalnim prikazovalnikom, 2500 mm Z napravo za odsesavanje (tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: rabljeno, Rezalna vretena Proizvajalec: HSD Tip: ES 779L 4P 12,00 kW H1 HSD rezalno vreteno 12 kW z menjalnikom orodij in 6-postajno postajo za serijo Kuka Quantec Sestavljeno iz: 1 kos Vreteno za rezanje, hlajeno z vodo z menjalnikom orodij HSD ES779L 4P 12,00 kW H1, tekočinsko hlajenje 1 kos Postaja za orodja za 6 orodij (postaja menjalnika orodij) z merilno postajo Leonie za preverjanje orodij 1 kos Omara Kuka Tech z frekvenčnim pretvornikom KEB, Nsdpfxewyay Ds Alteld nadzorno tehnologijo in hladilnikom za vodo, št. art. 00216249, serijska št. 0395009, leto proizvodnje 2018 Teža 360 kg 1 kos Komplet cevi in priključni kabli od nadzorne omare do HSD vretena. Prvotno zasnovano za robota Kuka iz serije Quantec, priložene so vse nosilne konstrukcije in priključki. 22726

Stanje: rabljeno, Leto izdelave: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot Machine Krause ES-SM Schlitztiefe / Slot depth: 220 mm Hub / Stroke: 30 mm Nsdpfx Alsi Dx Nnstjld Eckenausstoßtiefe / Corner ejection depth: 220 mm Online-Video-Inspektion per Skype-Video möglich. Ein Besuch in unserem Haus würde uns sehr freuen – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich. Lagerort: Emskirchen / Nürnberg – Test vor Ort möglich.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: 94094175, najv. debelina pločevine: 6 mm, vhodna napetost: 380 V, skupna masa: 7.000 kg, skupna dolžina: 3.500 mm, skupna širina: 2.200 mm, skupna višina: 1.600 mm, HACO TS 3006 giljotinske škarje za pločevino - maks. debelina pločevine: 600 mm - maks. širina pločevine: ca. 3200 mm Nsdjx Uymmopfx Alteld Pozor: artikel je mogoče prevzeti od 16. 2. 2026 naprej, na še dogovorjen datum. FCA D-73529 Schwäbisch Gmünd – naloženo na tovornjak.

Stanje: dober (rabljeno), Leto izdelave: 1994, vpenjalna sila: 150 kN, premer vijaka: 55 mm, razmak između stupova: 51 mm, delovna prostornina: 475 cm³, injekcijska masa: 428 g, vgradna višina: 660 mm, Stroj za brizgano oblikovanje – Machine-Engel ES 700/150 Sila zapiranja 150 ton Premer vijačnega valja 55 mm Prostornina bata 475 mm Teža vbrizganega izdelka 428 g Višina vgradnje orodja 250 mm – 660 mm Nledozklz Eopfx Altsd

Stanje: rabljeno, Leto izdelave: 1998, Outreach 290 mm Drilling stroke 180 mm Njdpfx Aew D Hi Telteld Total power requirement 1.9 kW Description to follow!