Stroj za vogalno luknjanje in reže

Krause ES-SM

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: Gujdpehpktvjfx Aa Usc - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: rabljeno, številka stroja/vozila: 59062, Creasing & gluing machine for covers – Karl Tränklein CGM Serial number: 59062/5 Gjdpeh Axd Nefx Aa Uouc Maximum working width: 500 mm Online video-inspection via Skype available. We would be pleased to welcome you for an on-site visit – more machines in stock. Immediately available – can be inspected. Located in our warehouse in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Leto izdelave: 1989, Collating Machine TMF N1414 - Collating Machine with 14 Stations for A3, 7 Stations for A2 - Includes delivery jogger with online zigzag unit - Panel operation and controls - Jamming detection - Double-sheet and misfeed (no-sheet) control - Pre-set counter and full receiving tray - Manuals included - Online video inspection available via Skype Godpfx Aeh Uk E Sja Uouc - We would be pleased to welcome your visit – more machines in stock - Available immediately – can be inspected - Located in Emskirchen / Nuremberg – available for testing

Stanje: novo, Leto izdelave: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between uprights: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed (max.): 140 mm / s R-axis travel range: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (dual guideway, aluminium) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Gedpjfifg Hjfx Aa Usuc Backgauge with motorized adjustment, linear guide and ball screw Backgauge finger with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design according to internationally recognized standards Electrical equipment according to internationally recognized standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch Godpfsdqzcxex Aa Usuc MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Model designation Gusdpfx Aogvquwsa Uoc Shark 332-1 CCS

Stanje: dober (rabljeno), Schmedt - PräRund - PräDeck - PräKant, in good condition, immediately available Guedpfx Ash Dy Ivea Uoc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sústava na výrobu brožúr Horizon Zoradzovací stroj Horizon VAC 100 a, VAC 100m Počet staníc: 2 x 10 Max. formát: 500 x 350 mm Min. formát: 148 x 120 mm Kapacita nakladania: 55 mm na stanicu Rýchlosť: max. 9 500 cyklov/h Hmotnosť: 320 kg na vežu Rozmery stroja: 810 x 652 x 1 961 mm Napájanie: 230 V, 10,6 A, 2,3 kW Stolík na zníženie stohu HORIZON ST-40 Špecifikácie Max. formát: 350 x 500 mm Min. formát: 182 x 128 mm Hrúbka papiera: 52 – 208 g/m² Rýchlosť: max. 8 000 súprav/h Výška stohu: 360 mm Rozmery stroja: 1 353 x 652 x 1 027 mm (D x Š x V) Heftovacia a skladacia stanica SPF 200A Prijímací formát, 4-stranové hárky: min. 180 x 105 mm, max. 508 x 356 mm Konečný formát brožúry: min. 85 x 105 mm, max. 250 x 356 mm Hrúbka brožúry: max. 25 hárkov, 100 strán Guedpfx Aoyhzubsa Uoc Rýchlosť: do 4 800 cyklov/h Hmotnosť: 782 kg (s predným orezávačom FC-200A) Rozmery stroja: 3 450 x 810 x 1 250 mm (D x Š x V) Napájanie: 230 V, 5,3 A; 1,0 kW Orezávač FC 200A Voľné od 05/2026

Stanje: rabljeno, Wire Stitching Machine Polygraph 103, Serial No. 6875 Operating manuals included Online video inspection available via Skype We would be pleased to welcome you for a visit – more machines in stock Available immediately – viewing possible Gsdpfxoh Ax Ufs Aa Ueuc Located in Emskirchen / Nuremberg – testing possible

Leto izdelave: 2015, stanje: novo, We have a MATICA Espresso card printer available. The new price is around €1,599, now available for €999. Year of manufacture: 2015. The printer has always been on display in our showroom; we have printed perhaps 10 cards with it and then decided that this type of system is not suitable for our company. That’s why it is now practically brand new and available for sale. Single- or double-sided edge-to-edge printing Optional magnetic stripe and smart card encoder Ethernet connectivity, optional WiFi Guodpfx Aofnldqja Usc Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact yet powerful desktop card printer that combines Italian design and engineering with German reliability for consistently high performance. The Espresso II offers excellent value and versatility, exceptional print speeds, and outstanding print quality. Its robust, durable construction is ideal for both office use and card production environments. The Espresso II is a single-sided desktop ID card printer, perfect for projects where only one side of the card needs to be printed. The printer can be easily upgraded in the field to duplex printing, doubling your card output without requiring additional hardware. On-site upgrades are also possible for contact and contactless smart card encoding. LED status indicators on the front allow you to monitor the production process from a distance, while the blue LED light on the card hopper door shows real-time card input availability. Optional single card manual insertion is available for individualized printing, and each printer features a rear output hopper for efficient handling of large print runs. The flexible setup, with front input and output trays as standard, saves space—perfect for desktop, cabinet, or under-counter installations. Each Espresso II also offers options for integrated magnetic stripe, contact chip, or contactless smart card encoders, making it suitable for a wide range of applications such as access control, time & attendance, payment systems, and more. The complete product line includes Ethernet as standard and optional WiFi for easy, convenient printing and encoding. You can configure your printer to match current requirements and later add features as your needs evolve. This new printer line is ideal for diverse applications, including employee and membership ID cards, service and benefits cards, gift and loyalty cards, access control cards, student IDs, and transit passes, among others. Espresso II is available with various configurations—modules, encoding options, colors, etc.