Nakup rabljenih strojev (200.000)

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 550 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 041, Stroj za obdelavo mostov za granit in marmor, z vrtljivim in nagibnim mizo, na voljo so nove jeklene podlage za most in mizo. Mere: 560 cm dolžine, 460 cm širine, 300 cm višine. Teža: približno 6160 kg. Inverter za disk motor. Delovna miza z motornim pogonom in nastavitevjo nagiba. Linearni sistem za oblikovanje. Nagib diska za poševne reze. Kedpfx Aozim Dljb Donc Glava, ki se vrti za 0-90 stopinj za rezanje/obdelavo pod kotom. Avtomatski program za žaganje in avtomatski program za profiliranje.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, Fully refurbished used Hosokawa Alpine Pharmapaktor APC L200/30 system by Alpine Originals. Technical Details Construction materials Product-contact parts: stainless steel Non-product contact parts: stainless steel Equipment not explosion-proof (NPSR) Non-ATEX (can be upgraded at additional cost) Knsdpfjvq Nlxjx Ab Dec No vacuum system (can be retrofitted at additional cost) Scope of supply Hosokawa Alpine Pharmapaktor APC L 200/30, with dosing unit, without Flake Crusher. The Hosokawa Alpine Pharmapaktor APC L200/30 is the perfect compactor for testing the behavior of various products with this technology. It also enables continuous low-capacity production if required. The Pharmapaktor can be equipped with a flake crusher granulator, allowing granulation of the compacted material produced by the unit. This increases the variety of end products achievable with this system, enabling a range of shapes and sizes, from different briquettes to granules according to the required specifications. Thanks to this flexibility, the machine can be adapted to different products and tasks. Compaction head Two cast stainless steel H-frames connected by spacer bolts. Two laterally mounted foldable arms enable quick roller changeover. The moving arms are secured with two tie rods, which also absorb the forces generated by the two compaction rollers. An insert in the chamber guides product flow, and two central parts seal the rollers. Pre-compactor unit The pre-compactor unit is mounted on a support column and can be raised and rotated to the side. The feed hopper (with two breaker bars) is equipped with a cylindrical/conical pre-compression screw. When the pre-compaction unit is removed, a limit switch is activated for the rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusive use of genuine components Original manufacturer’s warranty Guaranteed spare parts supply from the manufacturer Reduced delivery time Prior to delivery, the machine is inspected, all wear parts are checked and replaced if necessary, and the machine can be customised to your specific requirements Possibility to supply all required peripherals or adapt to your existing production plant We are also interested in repurchasing unused HOSOKAWA ALPINE equipment

Leto izdelave: 2003, stanje: generalkompletno obnovljen (rabljeno), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusively fitted with original components Original manufacturer warranty Guaranteed spare parts supply by the manufacturer Reduced delivery time Knjdpeic Nq Hefx Ab Doc Prior to delivery, the machine is inspected—all wear parts are checked and replaced if necessary, and we customize the machine to your specific requirements Option to supply all required peripherals or adapt to your existing production plant We are also interested in repurchasing unused HOSOKAWA ALPINE equipment Used Hosokawa Alpine Turboplex ATP 200 Air Classifier for engineering the perfect final particle design. Our air classifier enables separation of a product into two distinct fractions—a fine and a coarse split—where conventional sieves cannot deliver due to fineness or other product characteristics. This is especially useful for dedusting processes to eliminate unwanted ultrafine particles or to guarantee an upper cut size by separating oversize coarse material, allowing you to precisely tailor your product to the desired particle size distribution specifications. This unit is capable of processing various product types for multiple industries, including minerals, chemicals, and more. Construction material: - Product-contact parts: mild steel - Non-product-contact parts: mild steel No wear protection Not explosion-proof (NPSR) Scope of supply: Hosokawa Alpine Turboplex ATP 200 air classifier featuring one-wheel head and 5.5 kW motor

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusively uses original components Original manufacturer’s warranty Spare parts supply guaranteed by the manufacturer Reduced delivery times Prior to delivery, the machine is thoroughly inspected – all wear parts are checked and replaced if necessary, and we tailor the machine to your specific requirements Possibility to supply all required peripherals or adapt to your existing production line Kjdpfx Aeh U Awnjb Djnc We are also interested in the repurchase of used HOSOKAWA ALPINE equipment Refurbished Hosokawa Alpine Compactor CS 25. The compactor transforms powder into briquettes or granules. Thanks to a wide variety of accessories such as rollers and screens, the shape and size of the final product can be adjusted to meet your specifications. This equipment is suitable for processing a range of materials across various industries, including mineral, chemical, and more. Construction material: - Product-contact parts: stainless steel - Non-product contact parts: mild steel The equipment does not have explosion protection (NPSR) and is not ATEX certified. Scope of supply: Hosokawa Alpine CS 25 compactor, 11kW main motor for rollers, 4kW feeder screw motor, control cabinet.

Leto izdelave: 2022, stanje: generalkompletno obnovljen (rabljeno), A HOSOKAWA ALPINE Originals machine Completely overhauled by the original manufacturer Exclusively equipped with genuine parts Manufacturer's warranty Guaranteed spare parts availability Short delivery time Before delivery, the machine is overhauled and customized to customer specifications We are also happy to assist you in sourcing system accessories and integrating the machine into your existing production line Ksdpfxefhmmxe Ab Denc Refurbished Pharmapaktor APC L200/50. The machine has previously been used as a demo and rental unit. Compactor Head Two H-frames made of cast stainless steel, connected by spacer bolts. Two swing arms, which can be folded out laterally, allow for quick and easy roller changes. The swing arms are secured with two tie rods, which also absorb the compaction forces of the rollers. A chamber insert guides the product flow and two core elements seal the rollers. Pre-compaction Unit The pre-compaction unit is mounted on a support column and can be lifted off and swung to the side. The feed hopper (with two braking strips) includes a cylindrical/conical pre-compaction screw. A limit switch ensures that when the pre-compaction unit is lifted off, both the compaction rollers and the screw are automatically switched off. Materials and Surfaces Product-contact parts: Stainless steel 316 L (1.4404) Ra

Stanje: rabljeno, lastna masa: 7.500 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, dolžina tovornega prostora: 11.600 mm, višina nakladalnega prostora: 275 mm, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, skupna višina: 12.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 22,5, Oprema: ABS, Kögel SKVT 24 refrigerated double-deck semi-trailer | SAF axles with disc brakes | Carrier 1200 | 385/65R22.5 tyres | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-decker | Subject to errors and prior sale Knsdpfxewcf Ifo Ab Dec

Stanje: rabljeno, prevoženi kilometri: 232.450 km, moč: 162 kW (220,26 KM), prva registracija: 04/2004, skupna masa: 17.990 kg, konfiguracija osi: 2 osi, lastna masa: 10.010 kg, velikost pnevmatike: 295/80/R22.5, medosna razdalja: 3.300 mm, vrsta prenosa: mehanski, emisijski razred: Euro 3, vzmetenje: jeklo, skupna dolžina: 2.550 mm, skupna širina: 3.300 mm, skupna višina: 6.300 mm, število sedežev: 2, največja hitrost: 83 km/h, Oprema: registracija tovornjaka, zapora diferenciala, zavorni sistem na stisnjen zrak, | MAN LE 18.220 | Vozilo z desnim volanom | MUT Austro Cleaner 247/7.0 UM | Pralni stroj za čiščenje s visokim tlakom | Naprava za pranje cest | Stranski metli | Sesalnik za čiščenje kanalov | Ročno menjalnik | Euro 3 | Pridržujemo si pravico do sprememb, napak pri vnosu podatkov in predprodaje. Knedez S Il Uepfx Ab Dec

Stanje: rabljeno, lastna masa: 8.921 kg, največja dovoljena obremenitev: 27.079 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, naslednji pregled (TÜV): 04/2027, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Oprema: ABS, | Prikolica Krone za globoko zamrznjeno blago TK SLXi 400 | Osnova SAF z bobnastimi zavorami | Nosilec za rezervno kolo 2x, 1x z rezervnim kolesom | Hladilna enota Thermo King SLXi 400 | Debelina stene: 5 cm | Pnevmatike: 385/65 R22.5 | Dvostopenjska prikolica brez prečnih nosilcev | Pridržujemo si pravico do sprememb, napak pri vnosu podatkov in predhodne prodaje. Knsdpfxezmxpuo Ab Djc

Stanje: novo, Leto izdelave: 2024, ALL ALTENDORF F25 MODELS AVAILABLE FOR IMMEDIATE DELIVERY! Knsdpfjg Dgr Hsx Ab Dsc Manual height and tilt adjustment 0 – 46° of the saw blade with digital display Motor power 5.5 kW Saw blade speed 3,600 / 4,200 rpm Double roller carriage, carriage length 3,200 mm Angle/miter fence, crosscuts up to 3,450 mm Max. saw blade diameter: 315 mm, max. saw blade protrusion: 104 mm Cutting height 100 mm, 70 mm at 45° Machine height 88 cm Note on Used Machines: • Errors in technical data and prior sale subject to change. • Quoted prices are ex works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Knjdpfx Abjcrnm Ns Dec Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Longitudinal Flow Dryer – Heating with Electricity or Hot Water Internal chamber length: approx. 4,500 mm Internal chamber width: approx. 750 mm Internal chamber height: approx. 600 mm Chamber volume: 2.0 m³ Loading from above – chest design Control: manual / fully automatic Electronic control type C Longitudinal ventilation Number of fans: 1 piece Fan motor power: 0.55 kW, 400 V, 50 Hz Electric heating: 4.2 kW INCLUDED: Aluminium stacking laths Wood moisture probe Operating manual, electrical wiring diagram, etc. Space requirements: approx. 5,600 mm x 1,200 mm x 1,600 mm Weight: 400 kg Note for used machines: • Technical details are subject to change, errors excepted, and prior sale reserved. • Quoted prices are ex location – loaded free onto truck! • The machines have been cleaned and function-tested. Kjdpfjy Emqgsx Ab Djnc • All machines are purchased as inspected, without any claim for warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV2400R, teža obdelovanca (maks.): 1.500 kg, skupna višina: 2.150 mm, skupna dolžina: 2.687 mm, skupna širina: 3.030 mm, Premer žice (maks.): 0,3 mm, višina obdelovanca (maks.): 305 mm, širina obdelovanca (maks.): 820 mm, dolžina obdelovanca (maks.): 1.050 mm, vrsta vhodnega toka: trifazni, širina mize: 640 mm, skupna masa: 3.850 kg, dolžina mize: 840 mm, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 310 mm, vhodna napetost: 220 V, vhodna frekvenca: 50 Hz, vhodni tok: 35 A, Oprema: dokumentacija / priročnik, hladilna enota, Tehnični podatki – Mitsubishi Electric MV2400R Krmilna enota Proizvajalec krmiljenja: Mitsubishi Hodi osi Število osi: 3 Tehnične značilnosti Maksimalni kot konusa: 15° / 260 mm Potreben stisnjen zrak: 0,5 MPa, 75 l/min PC-tehnologija s 15-palčnim barvnim LCD-zaslonom na dotik in miško Elektronska ročna upravljalna enota Podpora pri obdelavi z 2D/3D CAM Grafično preverjanje obdelave Kapaciteta stroja Maks. kot konusa 15° / 260 mm Opis stroja Ta 3-osni žični elektroerozijski stroj Mitsubishi Electric MV2400R je bil izdelan leta 2013. Opremljen je s PC-krmilno enoto s 15-palčnim LCD-zaslonom na dotik ter omogoča 2D/3D CAM in grafično preverjanje obdelave. Stanje Stroj je še vedno priključen na električno napajanje in pod napetostjo. Knodpfx Ajz Sp Udob Doc

Stanje: zelo dobro (rabljeno), Bottene pila wahadłowa Moc silnika: 3,7 kW, 380 V, 50 Hz Maksymalna średnica tarczy: 500 mm Wysokość cięcia: ok. 120 mm Maksymalny wysięg: 500 mm Ze stołem rolkowym i prowadnicą wzdłużną po lewej stronie, 3000 mm Ze stołem rolkowym po prawej stronie, 1000 mm Średnica króćca odciągu: 120 mm Wymiary (dł. x szer. x wys.): ok. 4200 x 1150 x 1650 mm Waga: ok. 200 kg Piła odchylana w prawo Piła i stół rolkowy przejezdne W komplecie tarcza tnąca Informacje dotyczące maszyn używanych: • Zastrzegamy pomyłki w danych technicznych oraz sprzedaż międzyczasową. • Podane ceny dotyczą odbioru z lokalizacji – załadunek w cenie! • Maszyna została wyczyszczona i sprawdzona pod kątem działania. • Wszystkie maszyny sprzedawane są w stanie jak widać, bez jakiejkolwiek gwarancji. Knedpfoydnitjx Ab Dsc Oględziny na miejscu możliwe dla kupującego. • Szczególne ustalenia wyłącznie w formie pisemnej. (Odpowiadamy tylko na zapytania zawierające adres i numer telefonu!)

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 8FBMT50-13601, obratovalne ure: 95 h, dvižna višina: 4.700 mm, prosto dvigovanje: 1.610 mm, vrsta goriva: električni, tip droga: triplex, kapaciteta baterije: 840 Ah, dolžina vilic: 1.200 mm, Letnik izdelave: 2023 Baterija: 840 Ah, letnik izdelave 2023 Nosilnost: 5.000 kg Višina: 253 cm Tehnično stanje: zelo dobro Knjdpfx Asz Rt Eqjb Doc Vizualno stanje: zelo dobro Za dodatne informacije se obrnite na Karla Leitnerja.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 9FBM70T-10071, obratovalne ure: 139 h, dvižna višina: 4.700 mm, prosto dvigovanje: 1.760 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.200 mm, Letnik izdelave: 2022 Baterija: Letnik izdelave 2022 Nosilnost: 7.000 kg Višina: 290 cm Tehnično stanje: zelo dobro Kjdpjz Skkhofx Ab Djnc Vizualno stanje: zelo dobro Za dodatne informacije se obrnite na Karla Leitnerja.

Stanje: rabljeno, PRIMO - 1100 - E Švicarski kakovosten izdelek KONSTANTNA KALIBRIRNA STROJ / avtomatsko nastavljanje glave Avtomat za fino obdelavo z večpasovnim kalibriranjem Kombinirana enota s kontaktno valjčno in brusilno blazinasto enoto, z elektronsko nadzorovanim segmentnim brusilnim podstavkom Moč motorja za pogon traku: 9 kW Nastavitev nivoja kontaktnega valja je brezstopenjska, glede na lestvico zrnatosti Knodpfx Abjz Sn Sno Dsc Vhodna miza z nosilci za valje Delovna širina: 1100 mm Hitrost podajanja: 3 - 15 m/min, brezstopenjsko nastavljiva Avtomatska nastavitev debeline obdelovanca ENORMATIC: hitra nastavitev Stroj je PO GENERALNEM PREGLEDU v ODLIČNEM STANJU / iz obrtne delavnice Na zalogi v Liebochu

Stanje: rabljeno, največja dovoljena obremenitev: 15.230 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2011, * Lesni prikolica * Achleitner, 2 osi * Tip: 2ANR18 * Prikolica Knodpfx Aezqiv Hob Djc * Nadgradnja: stranske ograje * Barva: Bela * Lastna teža: 2.760 kg * Največja dovoljena skupna masa: 18.000 kg * Tehnološko dovoljena skupna masa: 18.000 kg * Nosilnost: 15.240 kg * Os: 2 * Dovoljena obremenitev osi: 9.000 kg na os * Pnevmatike: 265/70 R19.5 * Leto prve registracije: 07.11.2011

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 70.300 € Leasing obrok: 1.328,67 € Tlačna sila: 110 t Dolžina mize: 900 mm Širina mize: 540 mm Prehodna odprtina v mizi: 180 mm Hod: 14 - 114 mm Število hodov: 60 1/min Deska: 490x325 mm Nastavitev deske: 90 mm Iztok: 280 mm Motor: 7,5 kW Dolžina: 1.870 mm Širina: 1.320 mm Višina: 2.800 mm Teža: 5.600 kg 8-točkovno vodilo deske Sprednja zaščita s svetlobno zaveso Ročno nastavljanje deske Mehanska zaščita pred preobremenitvijo Knodpfeynnbkex Ab Doc Samodejno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 202.03.008.17, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, vrsta nastavitve višine: mehanski, hitrost pomika os X: 12 m/min, skupna višina: 1.693 mm, skupna dolžina: 4.620 mm, skupna širina: 1.200 mm, Oprema: CE označba, dokumentacija / priročnik, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear metres. It is fully operational, regularly maintained and ready for production. The machine is currently connected and can be inspected and tested under power. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed-air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorised positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release-agent spray unit - Sliding-agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Kjdpsztbutofx Ab Dsnc Dismantling, loading and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 14.022 h, številka stroja/vozila: 2621150, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: VARIOBEND / ASCO, model krmilnika: VARIOBEND Touch Control, delovna širina: 6.400 mm, najv. debelina pločevine: 1 mm, najv. debelina jeklene pločevine: 1 mm, maks. debelina pločevine iz nerjavečega jekla: 1 mm, maks. debelina aluminijaste pločevine: 2 mm, nastavitev zadnjega prislona: CNC krmiljen, zadnji prislon: 1.300 mm, skupna masa: 8.800 kg, skupna dolžina: 7.200 mm, skupna širina: 2.150 mm, skupna višina: 1.600 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, leto zadnje generalne obnove: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, kotni ventil, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, Ponujamo v prodajo strojno opremo VARIOBEND, CNC stroj za upogibanje pločevin, proizvedeno podjetje ASCO GmbH, Nemčija. Stroj je trenutno v lasti podjetja DIMING d.o.o., ki ima sedež v Sloveniji in je specializirano za gradbena in pločevinarska dela. Ksdpfxez Sz Txj Ab Djnc Stroj je zasnovan za natančno in učinkovito upogibanje pločevin in je še posebej primeren za izdelavo strešnih konstrukcij, fasad in arhitekturnih elementov iz pločevine. Njegova robustna konstrukcija in CNC-nadzorovana uporaba zagotavljajo natančne, dosledne in ponovljive rezultate upogibanja, zaradi česar je primeren za profesionalno obdelavo pločevine. Nadgrajujemo našo strojno opremo in investiramo v novejšo generacijo strojev za upogibanje. Stroj je na voljo za pregled v Sloveniji po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka zaloge: 070225 Dobavni rok: takojšen, predmet morebitne prodaje Država porekla: Turčija Cena: 33.700 € Mesečni obrok lizinga: 643,67 € Na zalogi: 1 Moč stiskanja: 30 ton Nominalna moč stiskanja pri 2 mm Dolžina mize: 400 mm Širina mize: 600 mm Premer luknje v mizi: 150 mm Hod: 1–60 mm Število hodov: 140 1/min Vodila batov: 4 Nastavitev bata: 60 mm Luknja za klin v batu: 40 mm Izložek: 200 mm Višina vgradnje: 300 mm Motor: 3 kW Dolžina: 1300 mm Širina: 1150 mm Višina: 2050 mm Teža: 1670 kg Varjena jeklena konstrukcija okvirja Štiripotno vodilo bata Pnevmatska kombinacija sklopke in zavore Zaščitni pokrov z optičnimi senzorji in stranskimi vrati Mehanska zaščita pred preobremenitvijo Dve ročni in nožni pedali za upravljanje Ročna nastavitev hoda Ročna nastavitev bata Spremenljivo število hodov s pomočjo frekvenčnega pretvornika Načini delovanja: * Način nastavitve * Dvoročno sprožanje * Nožno sprožanje * Dvo-taktni način delovanja prek optičnih senzorjev * Neprekinjeno delovanje Na dotik občutljiv zaslon za: * Števec hodov s prednastavitvijo za neprekinjeno delovanje * Nastavitev števila hodov * Intervali in trajanje mazanja * Alarmi * Smer vrtenja motorja * Nadzor vhodov in izhodov 2 prosta utora za priključitev periferije Avtomatsko centralno mazanje Oprema v skladu s standardi CE Možnosti: Blazinice za dušenje vibracij € Kjdpowirbxsfx Ab Denc 132,- Namizna plošča € 720,-

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Številka zaloge: 070236 Dobavni rok: takoj, možnost prodaje medtem Država izvora: Turčija Cena: 6900 € Mesečni obrok lizinga: 133,17 € Na zalogi: 1 Teža tuljave: 500 kg Maks. zunanji premer tuljave: 1200 mm Min. notranji premer tuljave: 400 mm Maks. notranji premer tuljave: 550 mm Maks. širina tuljave: 300 mm Min. širina tuljave pri različici s pnevmatsko pritiskalno roko: 80 mm Ksdpfx Abewirmuj Djnc Dolžina: 1450 mm Širina: 1200 mm Višina: 1640 mm Teža: 260 kg Motoriziran pogon Mehansko nastavljiv nosilec tuljave s 4 čeljustmi Regulacija hitrosti za hitrost odvijanja ter čas pospeševanja in zaviranja Fotoelektrični senzor bližine SICK za nadzor ohlapnosti pnevmatska pritiskalna roka Alternativne možnosti (cene po dogovoru): Različica brez pnevmatske pritiskalne roke Različica brez pogona, z zavoro, z ali brez pnevmatske pritiskalne roke

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 8FBEK16T-17169, obratovalne ure: 850 h, dvižna višina: 4.500 mm, prosto dvigovanje: 1.600 mm, vrsta goriva: električni, tip droga: triplex, napetost baterije: 48 V, dolžina vilic: 1.200 mm, Leto izdelave: 2023 Baterija: 48 V, leto izdelave 2023 Nosilnost: 1.600 kg Knjdpfx Asz Sxmcsb Dsc Višina: 215 cm Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na Karla Leitnerja.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 8FBE20T-18877, obratovalne ure: 443 h, dvižna višina: 5.500 mm, prosto dvigovanje: 1.490 mm, vrsta goriva: električni, tip droga: triplex, kapaciteta baterije: 630 Ah, dolžina vilic: 1.200 mm, Leto izdelave: 2022 Nosilnost: 2.000 kg Višina: 248 cm Ksdpfxjzihy Io Ab Djnc Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na Karla Leitnerja.

Leto izdelave: 2013, obratovalne ure: 2.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ponujamo to rabljeno Ultrasonic welder Branson 2000xdt Branson 2500 W, letnik izdelave 2013. Model: 2000xdt EDP št.: 101-132-1595 Vhodna napetost: 200–240 V Vhodni tok: 14 A Frekvenca: 50/60 Hz Faza: 1 φ Največja moč: 2500 W Serijska številka: XHF13037570A Mesec in leto izdelave: marec 2013 Velikost sonotrode 200 x 125 x 115 mm Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite. Kjdpoz Rm Tzofx Ab Denc