Debelinski skobeljni stroj 620 mm

S620

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), I am selling a stacking / destacking unit MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of manufacture 2011. Stacking unit with single-side guidance; also suitable for pallets. Vacuum system (with pump) Rotating head Automatic loading Infeed table with motorized roller system Outfeed table at floor level with lifting mechanism (motorized roller system) Front outfeed table with roller system Outfeed roller conveyor station for stacked material Complete safety fencing included! Hfedjh Hp Dtjpfx Afwjf Operating capacity: approx. 16 cycles per minute Panel height: 10 – 50 mm Min. panel dimensions: 250 x 320 mm Max. panel dimensions: 1300 x 3000 mm Overall footprint: L. 10,200 mm x W. 8,700 mm Total connected load: 45 kW Year of manufacture: 2011 Available immediately. Ready for operation and possible to inspect. Comes with CE certificate and full documentation.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 390 mm, višina središča: 310 mm, skupna masa: 61 kg, vhodna napetost: 230 V, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 3.500 obr/min, nosilec vretena: MK 2, moč: 0,75 kW (1,02 KM), • Solid cast construction of the headstock, tailstock, and support ensures smooth operation. • User-friendly operation of the cast tool rest. • Induction motor delivers high torque even at low speeds. • Digital speed display. • Edge of the tool rest made from hardened steel. • 24-position indexing for locking the workpiece. • Storage compartment keeps your centers always within reach. • Ejection pin and key for securing the faceplate. • Pre-drilled holes for headstock lighting. • Simple assembly of accessories: stand, extension, lighting, and mobile base. • Machine bed width is 160 mm! The mid-size LAGUNA 1216 wood lathe is distinguished by its robust components: cast-iron headstock, tailstock, precisely ground bed, and tool rest with a hardened steel edge for increased durability. Another highlight: ergonomic control panel made of anodized aluminum with a Duralumin speed control knob. Working speeds: 50–525, 325–1750, 650–3500 rpm. Infinitely variable speed control via the Duralumin dial, and switching between three gearing ranges using a simple lever mechanism. The advanced motor technology ensures high torque, even at low speeds. Tailstock locking at the rear: unobtrusive during operation but always within easy reach. Ergonomic handles with eccentric locking for secure holding. • Model: REVO 1216 • Recommended use: Professional production • Power (230 V): 750 W • Speed: 50–525, 325–1750, 650–3500 rpm • Max. working diameter over bed: 310 mm • Distance between centers: 390 mm • Spindle thread: M33 × 3.5 mm • Headstock / tailstock taper: MT2 / MT2 • Tool rest / tailstock bore: 17 / 17 mm • Quill travel: 63 mm • Tool rest post diameter: 25.4 mm (1") • Dimensions (L × W × H): 750 × 226 × 442 mm • Weight: 56.3 kg • Dimensions including packaging: 750 × 226 × 442 mm • Shipping weight: 61 kg • Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: Hodpfx Afstuuv Nswoff • Drive center • Live center • Faceplate • Tool rest • Ejection pin with brass tip • Spindle locking key

Stanje: pripravljen za uporabo (rabljen), Balluff BIS C-620ST2-S evaluation unit, version 1.3, used, 100% functional Hfodpei D T D Sefx Afwsf

Stanje: pripravljen za uporabo (rabljen), Balluff BIS C-620ST2-S evaluation unit, software/hardware version 1.3, used, 100% functional Hsdpfx Asi D T D Iofwjff

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1480 x 580 x 1120 mm Weight: 280 kg Total Power Requirement: 2.2 kW Surface Planer and Thicknesser AD-310 SPIRAL DELUXE The planer tables fold towards the rear of the machine, allowing for a space-saving setup. - Integrated, foldable chip extraction hood, connection diameter 100 mm - Digital handwheel display with 0.1 mm increments for precise thicknesser table adjustment - Hard-anodized aluminium planer fence, swivels from 90° to 45° High-torque drive motor for optimal planing results. Quick and easy adjustment of the desired depth of cut. Fast conversion from surface planing to thickness planing by folding up the planer tables. Safety features: - On/off switch with undervoltage release - Cutterhead guard in accordance with CE - Limit switch to prevent accidental start-up - Precision-mounted 3-knife cutterblock with HSS planer knives Technical Data: Jointer (Surface Planer) - Planing width: 310 mm - Table length: 1409 mm - Table height: 850 mm - Cutterblock speed: 5500 rpm - Spiral cutterblock, 2-row, equipped with 30 carbide reversible knives 15 x 15 x 2.5 mm - Cutterblock diameter: 70 mm - Fence size: 1100 x 150 mm - Fence swivels 90° to 45° Hjdpfxsvz Eqxj Afwjff - Max. depth of cut: 3 mm Thickness Planer: - Table length: 545 mm - Thickness table extension with roller, L = 300 mm, W = 310 mm - Planing width: 307 mm - Thickness capacity, min./max.: 4 – 225 mm - Max. depth of cut: 3 mm - Min. workpiece length: 160 mm - Feed speed: 7 m/min - Extraction port diameter: 100 mm - Motor power (S1): 2.2 kW - Voltage: 400 V - Machine dimensions (L x W x H): 1480 x 580 x 1120 mm - Weight: 280 kg Scope of delivery: - Spiral cutterblock equipped with 30 carbide reversible knives - Mechanical digital display for thickness table - Planer fence - Thickness table extension - Mobility kit

Stanje: pripravljen za uporabo (rabljen), Balluff BIS C-620ST2-S evaluation unit, used, in good condition, 100% functional Hodpfx Aei D T D Djfwjff

Stanje: rabljeno, To je oglas za eno izmed sedmih peristaltičnih črpalk Watson Marlow 620S/R Enote so popolnoma delujoče in pripravljene za takojšnjo uporabo. Izvedba in funkcionalnost Model 620S/R spada v serijo 600 ohiščenih peristaltičnih črpalk z brezkrtačnim DC motorjem in digitalnim tipkovniškim upravljanjem (620S), nameščenim v robustno ohišje s stopnjo zaščite NEMA 2 / IP31, odporno na industrijske razmere; primerno za uporabo v suhih industrijskih okoljih. Naprava podpira dvožično napajanje (100–120 V ali 200–240 V, 50/60 Hz) in ponuja funkciji MemoDose za enkratno doziranje ter brezžično varnostno stikalo. Ohišje je odporno na kemikalije, iz prašno barvanega tlačno litega aluminija, z enostavno čistljivo membransko tipkovnico. Zmogljivost črpalke Pretok: 0,00026 do cca 4,23 gpm (približno 0,001 do 16 L/min) z glavami 620R. Z novejšimi glavami 620RE LoadSure je pretok do cca 4,76 gpm (0,004–18 L/min). Tlačna zmogljivost: do približno 60 psi (4 bar) z ustrezno glavo in cevjo. Hedpfx Ajxhdx Dsfwsff Natančnost kontrole: izjemno širok razpon regulacije 2.650 : 1, fino nastavljiva hitrost od 0,1 do 265 rpm v izbirnih korakih (0,1, 0,5, 1, 2, 5 ali 10 rpm), z natančnostjo hitrosti 0,1%. Črpalne glave in cevi Model podpira naslednje zamenljive črpalne glave: • 620R Mk II (kontinuirana cev, dva valjčka) • 620RE in 620RE4 (LoadSure elementi, dva ali štirje valjčki) Glave so kompatibilne z različnimi materiali cevi (npr. Marprene™, Bioprene™, Sta‑Pure™, silikon) in dimenzijami (običajno notranji premer 6,4 mm do 17 mm). Glave 620RE in RE4 imajo uvlečljive valjčke za lažje čiščenje (CIP/SIP) in hitro menjavo cevi. AFAB Lab Resources – rabljena laboratorijska oprema Fizične lastnosti in izvedba Stopnja zaščite: IP31 (NEMA 2) za standardni model 620S/R; na voljo so tudi izvedbe IP66/NEMA 4X (npr. 620SN/R) za okolja z večjo potrebo po zaščiti pred prahom in vodo. Teža: okvirno 19,6 kg (z glavo 620R/RE) oziroma 20,1 kg (z glavo 620RE4). Glasnost: manj kot 70 dB(A) na 1 meter – razmeroma tiho za neprekinjeno industrijsko uporabo. Napredne funkcije • MemoDose: Natančno enkratno doziranje – odlično za aplikacije, ki zahtevajo doziranje • Ramp funkcija + anti-kapljanje: Ramp izboljša vodenje občutljivih tekočin, preprečuje brizganje/penjenje, anti-kapljanje pa zmanjša ostanek po doziranju (funkcija pogosto vključena v sorodne Di izvedbe) • Izvoz podatkov: Nekateri modeli (npr. 620S/RE) podpirajo RS‑232 izvoz serij – pomembno za zagotavljanje skladnosti z GMP

Stanje: dober (rabljeno), Leto izdelave: 1984, SAC rabljeni poravnalni skobeljni stroj SAC FS 430 - Širina skobljanja: 430 mm - Dolžina mize: 2,90 m - Nožna gred 120 mm s 4-rezilnimi lamelnimi rezili - Motor 3 kW 380 V - Avtomatska zavora motorja - Odstranitev ostružkov: 8 mm - Vzporedni prislon nastavljiv do 45° - Dodatni prislon Aigner za preklop - Mostični zaščitni pokrov (zaščita za nože) - Tih način z nazobčanimi jeklenimi robovi mize - Izvlečni priključek - Teža: cca. 650 kg Lokacija: na lokaciji kupca Hfedex Nrvvspfx Afwjf - na voljo takoj - Vmesna prodaja pridržana

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, I am selling a through-feed middle cross-cut saw HOMAG FPL620/06/15/P S/LQ. Year of manufacture: 2007. Working width: 204 - 1304 mm Element height: 12 - 60 mm Cutting width: 100 mm Raw part length: 300 mm Hfedpfxskbx Eas Afwef Feed speed: 10 - 40 m/min. Configuration: 1 + 1 pcs cutting units, top + bottom 1 pc flexible cutting unit, top/bottom 1 pc flexible cutting unit, top/bottom 1 pcs grooving unit with jump and softforming function Material pressure belt with overhead feed. Throughfeed machine. Condition: Very good. Available immediately.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 2.800 obr/min, montažni premer: 300 mm, dolžina pomika po osi Y: 1.800 mm, CNC lathe with two stations – Efficiency, precision, and productivity in cylindrical workpiece machining The CNC lathe with 2 working units and numerical control is a modern solution for machining cylindrical wooden components—such as columns, table legs, or decorative elements—providing accuracy, repeatability, and efficiency in any workshop or manufacturing environment. Double performance with independent units Equipped with two working units that can operate simultaneously or independently, the lathe enables rapid machining of workpieces up to 1200 mm in length. It is ideal for serial production of furniture components, ecclesiastical elements, or artistic objects. Robust construction for durability The welded bed from rectangular profiles, thermally treated, provides stability and resistance to torsion. Linear guides on the X, Y, and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack-and-pinion system, guarantee exact positioning and efficient control on all axes. The manually adjustable tailstock with four fixing points stabilizes workpieces during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds up to 18,000 rpm without overheating, ensuring constant workflow and extended service life. Smart DSP control The DSP control unit with internal memory enables fast file import, project resume from the stopping point, and real-time parameter adjustment—ideal for a continuous and efficient production flow. Auxiliary precision and maintenance systems Self-centering chucks hold workpieces securely, while optical sensors and automatic lubrication systems ensure precision and low maintenance. Key advantages - Perfect repeatability, even for high-volume production - Operational flexibility with independent working units - Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality, and adaptability in wood machining, making it the ideal choice for modern workshops or furniture factories aiming to optimize their production processes. Maximum working length: 1200 mm Hfodewhbgujpfx Afwsf Maximum working diameter (Ø): 300 mm Number of working units: 2 Control: DSP Workpiece rotational speed: 0–2800 rpm Motor power: 4.5 kW Spindle speed: 18,000 rpm Inverter: “BEST” inverter Drive motors: Hybrid servomotors Maximum feed rate: 50 mm/s Accuracy: 0.0125 mm