Žaga, vrezovalnik za zobate repe

MS 35-SF

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Predpedh Tfgsfx Agpod Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: rabljeno, Automatic packaging machine, sealer SIAT / BRÜNINGHAUS type XL-35-94 / P Carton sealing machine, carton gluer, semi-automatic sealing machine Serial no. 19084 Year of manufacture: 2004 Carton length: 160 mm – unlimited Carton height: 120–510 mm Carton width: 120–510 mm Mains connection: 400 Volt, 50 Hz, 260 Watt - Manual adjustment of the side transport belts for carton width via hand crank - Carton feed via right and left conveyor belts - Manual height adjustment of the upper sealing station via hand crank - Seals both the top and bottom of the carton using 2 separate tape stations - 2 taping heads for processing self-adhesive tape, tape width 75 mm, likely type K12 Prodpfx Aet Exq Njgpjd - Taping stations for self-adhesive tape (suitable for large rolls Ø 300 mm) - Height-adjustable feet for adapting the working height Space requirements (L x W x H): 1150 x 1100 x 1350 mm Weight: 185 kg In good condition

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal for the previous customer was 220 mm. The specified weights are only possible with a driven, customer-supplied roller conveyor. Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Input Pressure: 8 bar Noise Emission Value: less than 80 dB(A) Machine: see layout Operator Side: right-hand side in conveying direction Control Cabinet: fixed on the left side of the machine Paint: Machine RAL 7032, grey Black-yellow Prsdpfxelcc U Es Agped Roller Conveyor Height: 900 mm

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Includes: built-on control cabinet Podpfx Aeu T Dv Eogperd

Stanje: zelo dobro (rabljeno), Dvojna kotna žaga Hoffmann MS35-SF/S07.117 Rezi pod kotom 45° Motorji žag 4×2,2 kW Obrat žag 3000 obr/min Velikost žag 350 mm, odprtina 30 mm Največja delovna širina 80 mm Največja delovna višina 80 mm Frezerski agregati za lastovičji rep 2×0,5 kW Obrat frez 19.000 obr/min Možnost nastavitve dveh položajev frezanja Delovni tlak 6 bar CE certifikat Dokumentacija DTR Podpfsw T R T Tjx Agpsrd Teža cca 800 kg Skupne dimenzije stroja z mizami: 658×92×170 cm (V)

Stanje: rabljeno, angular transfer unit, roller conveyor, roller track, driven roller conveyor, roller conveyor, roller track with strip pull-off device, transfer station - Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt - Base frame: heavy-duty, height-adjustable base frame - Speed: roller conveyor 20 m/min / conveyor belt 23 m/min - Roller conveyor: conveyor rollers, Ø63 x 2500 mm, conveyor belt 17 x 2815 mm - Conveyor belt: 6 belts 17 x 2830 mm - Drive/gearbox: Nord, see photos of type plates - Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm Predpfx Ajrv Av Iegpsd - Weight: 569 kg / 258 kg

Stanje: rabljeno, Horizontal conveyor belt, 13,500 x 800 mm wide, 13.5 m long, price: €4,900, contact person: Mr. Rainer Eckerle. Psdpfx As R U U Aegperd

Leto izdelave: 2009, Stanje: rabljeno, Roller conveyor, roller track, powered roller conveyor, rollerway Podpeb A S Ugsfx Agperd -with rotary unit, rotatable via servo motor -robust design -electrically driven -drive motor: 0.37 kW, 76 rpm -roller width: 1450 mm -conveying length: 1400 mm -roller diameter: 105 mm -rollers: rubber-coated -shaft diameter: 25 mm -conveying height: 950 mm, adjustable -powered: via belt -dimensions: 1400/1650/H960 mm -weight: approx. 300 kg

Stanje: zelo dobro (rabljeno), ZIM Hülsta Carcase Upender The carcase upender is used for upending and onward transport of assembled carcases. Carcase upenders are typically used with continuous flow carcase presses. They facilitate handling when positioning large workpieces. Conveying and assembly device within a carcase assembly line. Behind a throughfeed carcase press, the pressed carcases are placed onto their rear side with the help of this device. Psdpevdb Ixefx Agpjrd This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Model: Carcase Upender Dimensions: You can find more articles – both new and used – in our shop! International shipping costs available on request!