Pogon na valjčni transporter

Grenzebach mit Dreheinheit

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Itjdpfodh Tfgsx Af Tsb Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal for the previous customer was 220 mm. The specified weights are only possible with a driven, customer-supplied roller conveyor. Technical Data: Itsdpfolcc U Eex Af Tob Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Input Pressure: 8 bar Noise Emission Value: less than 80 dB(A) Machine: see layout Operator Side: right-hand side in conveying direction Control Cabinet: fixed on the left side of the machine Paint: Machine RAL 7032, grey Black-yellow Roller Conveyor Height: 900 mm

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Iodpfx Afsu T Dv Eo Tetb Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Includes: built-on control cabinet

Stanje: rabljeno, angular transfer unit, roller conveyor, roller track, driven roller conveyor, roller conveyor, roller track with strip pull-off device, transfer station - Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt Itsdsrv Av Iopfx Af Tsb - Base frame: heavy-duty, height-adjustable base frame - Speed: roller conveyor 20 m/min / conveyor belt 23 m/min - Roller conveyor: conveyor rollers, Ø63 x 2500 mm, conveyor belt 17 x 2815 mm - Conveyor belt: 6 belts 17 x 2830 mm - Drive/gearbox: Nord, see photos of type plates - Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm - Weight: 569 kg / 258 kg

Stanje: pripravljen za uporabo (rabljen), Tehnične značilnosti Sinhronizirano rezanje in sestavno rezkanje 2 rezili Ø 350 mm / 2 HOFFMANN rezkarja pod kotom 45° (maks. globina rezkanja 70 mm) Maks. višina obdelovanca: 80 mm Maks. širina obdelovanca: 90 mm Vpenjalni valj za obdelovance Digitalno dolžinsko vodilo Dvoročno upravljanje Idealno za tesarstvo, manjše mizarske delavnice, izdelavo okvirjev, letvic, okovja Moč in motorji Priključitev: trofazna Skupne dimenzije Dolžina: 1600 mm Višina: 1470 mm Itjdpfx Aoradt Ief Tsb Teža: 850 kg

Stanje: rabljeno, Horizontal conveyor belt, 13,500 x 800 mm wide, 13.5 m long, price: €4,900, contact person: Mr. Rainer Eckerle. Itedpfx Afe R U U Aj Tob

Stanje: zelo dobro (rabljeno), ZIM Hülsta Carcase Upender The carcase upender is used for upending and onward transport of assembled carcases. Carcase upenders are typically used with continuous flow carcase presses. They facilitate handling when positioning large workpieces. Conveying and assembly device within a carcase assembly line. Behind a throughfeed carcase press, the pressed carcases are placed onto their rear side with the help of this device. This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Itjdpfx Afsvdb Ixj Teb Model: Carcase Upender Dimensions: You can find more articles – both new and used – in our shop! International shipping costs available on request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 941, delovna višina: 1.350 mm, delovna širina: 600 mm, delovna dolžina: 2.500 mm, TEHNIČNE PODROBNOSTI Iedpfjxnyg Rox Af Tstb Dolžina stiskanja: maks. 2.500 mm Višina stiskanja: maks. 1.350 mm Delovna globina: maks. 600 mm PODROBNOSTI O STROJU Električni podatki Nazivna napetost: 3/N/PE/400 V Nazivni tok: 11 A Nazivna moč: 4,7 kW Frekvenca: 50 Hz OPREMA Vertikalni in horizontalni pritiskalni nosilci z elektromehanskim pomikom Ustvarjanje pritiska prek frekvenčno vodenih zobniških motorjev Pritisk stiskanja vertikalno in horizontalno nastavljiv ločeno Čas stiskanja nastavljiv