Stiskalnica za telo

HÖFER Koptronik

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements Hsdpfx Aeiidm Nsf Teng - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Hnsdpfx Asdh Tfgef Tog Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: rabljeno, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Hedsncc Igepfx Af Tjng Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged

Stanje: dober (rabljeno), Leto izdelave: 1991, Longitudinal saw with 6.2 m cutting length max. cutting height: 170 mm max. cutting width: 600 mm with laser Hnodsut Rbvspfx Af Tjg electric width adjustment immediately ready for operation

Leto izdelave: 1995, Stanje: dober (rabljeno), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of Manufacture: 1995 S/N 3508 3179 Key Features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width for the glue thread cutting unit Hnodpfx Aehbp Ifof Tjg Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot-air heating Compressed air generation Discus for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Stanje: rabljeno, številka stroja/vozila: 006290, Max. working width: 1300 mm Max. working height: 100 mm Hjdpfx Aeu A Evhjf Tong Number of rollers: 2

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight: maximum 30 kg/meter The maximum cross-sectional diagonal for the previous customer was 220 mm. The specified weights are only possible with a driven, customer-supplied roller conveyor. Hnodolcc U Eopfx Af Teg Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, cleaned, and oil-free Air Consumption: approximately 20 NL per cycle Maximum Input Pressure: 8 bar Noise Emission Value: less than 80 dB(A) Machine: see layout Operator Side: right-hand side in conveying direction Control Cabinet: fixed on the left side of the machine Paint: Machine RAL 7032, grey Black-yellow Roller Conveyor Height: 900 mm

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Hnodpfx Afju T Dv Ej Tjg Includes: built-on control cabinet

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC drilling machine for precise single-item and series production A drilling head with seven vertical, four horizontal spindles and a grooving saw unit Equipment: Roller conveyor for workpiece infeed and outfeed Edge sensor Pressure-boosted Y-axis for hard material machining Automatic lubrication Operator interface software Maestro CNC QWERTY keyboard for convenient data input Hnjdpfxjwz Nuyj Af Teg

Leto izdelave: 2001, Stanje: skoraj kot novo (rabljeno), Fladder brushing machine CMC Futura Bold x 2, 6 aggregates. Hnsdpei A Ivyefx Af Tsg UPWARDS WIDE AGGREGATE, DOWNWARDS WIDE AGGREGATE, LEFT AND RIGHT NARROW AGGREGATES x 4. Working width 1200 mm, stepless feed speed adjustment via frequency inverters.