Komplet distančnikov podajalnega valja WEINIG

Stanje: rabljeno, Leto izdelave: 2004, Kompaktna polavtomatska čelilna spajalna linija, sestavljena iz: - Rezkalnik PJ 150/500 - Prenosne mize za ročni prenos Fjdow Nbacjpfx Aflepb - Enokanalne stiskalnice PJ 7/6100 li Rezkalnik: 2 paketa/min Stiskalnica: 2 cikla/min Vhodna dolžina: 150 – 700 mm Končna dolžina: maks. 6.100 mm

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Four-side planer Fodpfx Afehlp D Njlepb - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit on separate motor Manual height adjustment of saw blade Tilting saw blade from 0° to 45° Manual tilt angle adjustment of saw blade Carriage length: 3,200 mm Carriage lock Worktable dimensions: 1,450 mm x 1,030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Fpodpfx Afjv S Uz Ieljb Overall dimensions: Length: 3,430 mm Width: 1,900 mm Height: 1,560 mm

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fjdpforigxyox Aflopb Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 Fpjdpfxoin Nrgo Afleb – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg

Stanje: novo, Holzkraft minimax si 400es 32 Panel Saw 5504754 Heavy-duty professional version with scoring unit and anodised aluminium sliding table. Scoring unit equipped with its own drive, easily adjustable from outside Smooth-running, precise format sliding table made of anodised aluminium with proven, permanently smooth-running ball contact system on hardened guides; 10-year warranty on wear of the guide rails Large-area outrigger table (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic crosscut fence with two fold-down stops Precision rip fence, foldable for large panels, with quick-release and integrated fine adjustment Standard equipment includes table extension, table enlargement, and excentric clamp Saw assembly made from a robust cast iron ring with permanently precise dual trunnion support and zero-point tilting for smooth and perfect cuts, 6-year Holzkraft warranty on trunnion wear Large-area worktable made of stress-relieved cast iron High dead weight ensures precision and smooth operation Equipped with a powerful three-phase motor Version M: Electric height adjustment and tilting of the saw unit, digital tilt display Version A: On/off switch on the sliding table Version M A 3: Programmed control of saw blade height and tilt as well as rip fence positioning; stepless positioning of the rip fence via switch or automatic positioning system; position display via encoder, adjustment via ball screw, possibility for incremental adjustment Version UP: Swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and Weights Weight (net) approx. 715kg Extraction port Extraction port diameter 120mm Extraction port diameter for blade guard 80mm Installation information Transport width 990mm Machine body length 1900mm Machine body width/depth 885mm Space required length 7180mm Space required width/depth 4860mm Space requirement explanation: Dimensions consider maximum travel or usable lengths Working area length 1600mm Working area width/depth 2300mm Working area explanation: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical Data Connection voltage 400V Network frequency 50Hz Scoring motor power 0.55kW Main drive motor power 7.0kW Rated operating mode main motor S6 Duty cycle main motor 40% Sliding Table and Work Table Sliding table length 3200mm Sliding table width 360mm Sliding table height 142mm Table length 940mm Table width 560mm Table height 900mm Fpsdpekkrm Rofx Aflsb Saw Unit Cutting width with rip fence 1270mm Max. crosscut width left of saw blade 3260mm Edging length 3200mm Saw blade tilt 90 – 45° Max. cutting height 90° 136.5mm Max. cutting height 45° 97mm Max. cutting height explanation: Independent from scorer Saw blade diameter 400mm Saw blade diameter explanation: Independent from scorer Saw blade speed 4000rpm Scoring Unit Scoring blade diameter 120mm Scoring blade speed 9200rpm Holzkraft Specialist Dealer – Accessories available on request!

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: Fpedpfxswwl Nlo Afleb ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: zelo dobro (rabljeno), Linija za spajanje lesa Grecon Profijoint Grecon Profijoint Vhodna dolžina materiala: 150-700 mm Širina materiala: 40-150 mm Debelina lesa: 18-50 mm Enostranski čopač Možnost rezkanja na črto Moč rezkalne vretena: 15 kW Fpedpfx Ajw Ilrysflsb Moč drobilnega/podrezovalnega vretena: 11 kW CE certifikat

Stanje: zelo dobro (rabljeno), Four-Sided Planer Weinig Profimat 23 Fortec Fjdpfxjumxqro Afljpb Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certified

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, I am selling the semi-automatic finger jointing line LESSPOJ. Year of manufacture: 2022 Input lengths: 180-1,000 mm Wood width: 20-160 mm / 610 mm width in 1 pass Wood thickness: 20-80 mm Automatic finger jointing line with glue injection on 1 side Automatic material turning for the 2nd pass at the reversing table Automatic feed into the press Fpjdpfx Aomig Tdjflob Press 3.00 - 6.10 m with automatic cycle and end-cut saw. Overall dimensions: 16,250 x 3,684 mm Robust, heavy-duty construction. Very good condition. Available immediately.