Sušilnik za ogrevanje in sušenje TRW, model II

Leto izdelave: 2020, Stanje: novo, 7" Touch Panel The large color touch panel is aesthetically pleasing and offers comfortable, intuitive operation. You can configure all essential parameters directly on the panel. Memory for 20 Programs with 10 Events Each It is possible to store up to 20 programs, each with up to 10 consecutive time-temperature events, arranged along the heating curve. This feature is particularly important for more demanding processes. Display of Gas / Oil Consumption Consumption is calculated based on burner settings. With this function, you can estimate the cost of a specific cycle, plan consumption, and monitor personnel usage. Dual-channel Recorder with USB Cycle Parameters Laedpfxefzb Nis Ah Aek Every oven is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to an aircraft black box—onto a USB stick.

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. Ledpfxetyyn Hj Ah Aeak 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wiesheu EBO 60x80 Combi Oven, bouwjaar 2017 - Euromat 64 L 2600-A-FBBBCBAA Laodpfx Aop Sr N Roh Aok - EBO 68 M X1625-A-BBADA

Leto izdelave: 2020, Stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Lsdpfx Ajflk Awoh Aoak Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20992, Spoštovani, predstavljamo vam priložnost za nakup vakuumske peči IPSEN VTTC-324, letnik 1988. Laedpswah R Rofx Ah Aok Tehnične značilnosti vakuumske peči: - Nazivna moč (Sn): 165 kVA - Nazivna napetost (Un): 400 V, 50 Hz - Nazivni tok (In): 240 A - Uporabne dimenzije komore: 450 mm x 600 mm x 900 mm - Moč grelcev: 120 kW - Napetost grelcev: 43 V, 50 Hz - Tok grelcev: 1613 A - Temperaturno območje: 350 – 1320 °C - Absolutni vakuum: 1 x 10⁻⁵ (difuzijska črpalka) - Absolutni tlak: 5 bar Skupaj s pečjo prejmete tudi veliko rezervnih delov in dodatne opreme za proces toplotne obdelave (posoda za plin, grelci, večje število krmilnikov, polnilniki ipd.). Za vse dodatne informacije me, prosim, kontaktirajte.

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Temperaturen bis zu 400 °C (Leistung: 33 kW) Vortemperieren / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturprogrammierung Abgedeckte Führungsbahnen (DGP) für dauerhaft hohe Präzision Direktantrieb vom Motor zur Hauptspindel für besonders ruhigen Lauf Umlaufschmierung mit Filterung zur Schmierung des Präzisions-Hauptspindellagers Kombinierte Steuereinheit für wirtschaftlich vorteilhaftes Programmieren und Bedienen der Maschine sowie optimalen Zugang zum Arbeitsbereich Länge: 2500 mm Ljdpfxjuqkwfs Ah Aoak Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical Data: >> Machine No.: 2202-7020, FPS No.: 3364, year: 2013 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Features: >> 3-axis Heidenhain ND 780 digital readout >> Brake motor with immediate spindle stop >> Centralized lubrication >> 2x emergency stop >> Operating manual >> Coolant system Lsdevbifgopfx Ah Aeak About the Machine: For sale is a universal milling machine Deckel FP2, repowered by FPS, in as-new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine features an electrical centralized lubrication system and two emergency stop switches for added safety. As of 2013, both mechanically and electrically tested. The Heidenhain digital readout simplifies work and ensures even greater precision. Take the opportunity to inspect and test the Deckel under power on site. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 1986, The Steriflow Barriquand 1351 autoclave represents a benchmark solution for sterilization and pasteurization in industrial environments. Utilizing superheated water, it ensures maximum efficiency in preserving both food and pharmaceutical products. This 1986 model remains in excellent operating condition and continues to meet the high standards of modern production. Additionally, this autoclave is equipped with six baskets, enabling high-capacity processing—ideal for large-scale production requirements—while delivering outstanding energy efficiency. Its type B circuit ensures reliable performance and consistent product treatment. Laodpfxsu Dimyo Ah Ask Furthermore, Steriflow, a manufacturer recognized for its professional-grade equipment, designed this autoclave to deliver exceptional durability alongside flexibility for various applications. To find out how the Steriflow Barriquand 1351 autoclave can optimize your operations, visit our website for detailed information on its benefits and operation.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new Laedpfsmhfrrsx Ah Ajk - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically to the state of the art at the time of manufacture.

Stanje: zelo dobro (rabljeno), Glasbeek Finish Gas Powder Wall Chamber Furnace 250°C Glasbeek Finish Gas Powder Wall Chamber Furnace Maximum temperature: 250°C Electrical connection: 8 kW 51 kW 3x400V Year of manufacture: 2003 Approximate internal dimensions: W 120 cm x D 300 cm x H 139 cm with loading trolley (L 280 x W 102 cm) Approximate external dimensions (L x W x H): approx. 380 x 220 x 305 cm Transport upon request Lodpfx Ahod Szzgo Asak More items – new and used – can be found in our shop! International shipping costs on request!