Globinska podpora za paletna stojala

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 34.744 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 258 032, skupna masa: 11.500 kg, prebijalna sila: 20 t, natančnost pozicioniranja: 0,07 mm, premer orodja: 89 mm, TECHNICAL DETAILS Machine force: 196 kN (20 t) Air pressure: 5 bar Air flow: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 rotation: No rotation possible Ihjdpfxeyn Nybs Adkjw Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Iodpfok Abbbsx Adkshw Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 1.500 kg, dolžina vilic: 1.100 mm, skupna masa: 3.350 kg, skupna dolžina: 3.100 mm, skupna širina: 1.000 mm, TEHNIČNI PODATKI Dvižna zmogljivost: 1.500 kg Dolžina vilic: 1.100 mm PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 3.100 x 1.000 x 2.000 mm Teža: 3.350 kg Ijdpjyt Nl Isfx Adkohw OPREMA Polnilec

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wave soldering system with comprehensive equipment! A spare parts package valued at approximately €20,000 is included in the sale and delivery! The system consists of the following components: - Seho Wave Soldering System MWS 2340-F - Fluxer SelectFlux - Streamline Transport System incl. lifts TECHNICAL DETAILS Preheater PULSAR: 2x convection and 5x Pulsar preheating zones (3,300 mm length) Wetting length of soldering unit: 40 mm + 30 mm Return transport level: raised to 405 mm Ijdpfjyt Nlbsx Adkohw Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas purification system - Finger cleaning unit - Foldable convection top heating - Fan speed monitoring for convection preheating - Standard soldering aggregate - Wide solder nozzle unit, 7 hole rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen-saving circuit - Transponder system for automatic switching of soldering programs - Selective fluxing module (external module) - Flow rate sensor for flux per spray head - Flux storage tank with connections - Replacement filter for external spray fluxer module – upper system area & lower system area - Spare PC

Stanje: dober (rabljeno), Okvirji: 8860x1050x80 mm 34 kosov 3000*1050 mm 7 kosov Prečke: 1860*75*45 mm (2800 kg/polica) 352 kosov 2760*115*40 mm (2400 kg/polica) 26 kosov Ihodpfx Adjd Hbqnekjw 2700*100*50 mm (2400 kg/polica) 22 kosov Možen je tudi nakup delnih količin. Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme, z veseljem pa vam pomagamo pri načrtovanju. Priprava individualne ponudbe je za nas samoumevna. Dostava: Prosimo, povprašajte za stroške prevoza tako, da navedete vašo poštno številko, kraj in želeno količino artiklov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 003002, minimalna gramatura papirja: 35 g/m², največja gramatura papirja: 209 g/m², širina papirja (maks.): 738 mm, največja višina papirja: 1.300 mm, TEHNIČNI PODATKI Maks. format papirja: 738 x 1.300 mm Min. format papirja: 210 x 297 mm Višina kupa: 1.200 mm Teža papirja: 35 do 209 g/m² PODROBNOSTI O STROJU Napajanje: Trifazno, 400 V Tok: 12,6 A Priključna moč: 5,3 kW Dimenzije (D x Š x V): pribl. 4.380 x 1.870 x 1.680 mm OPREMA Paletni podajalnik PFU-74F Uporabniku prijazen zaslon na dotik Ihedpfoyrnz Eox Adkew 6 pregibnih žepov Prvi pregib z nožem in 2 žepa pod nožem Drugi pregib z nožem

Leto izdelave: 1998, obratovalne ure: 297 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 200 mm, največja hitrost vrtenja: 3.000 obr/min, premer vijaka: 35 mm, številka stroja/vozila: E0195/10, Pas de prix de réserve – vente garantie au plus offrant ! Extrudeuse monovis avec seulement 297 heures de fonctionnement, y compris scie de tronçonnage et unité de tirage ! Hussmann ES35 x 30D DÉTAILS TECHNIQUES Diamètre de la vis : 35 mm Longueur : 30D DÉTAILS DE LA MACHINE Puissance moteur : 16 kW Heures de fonctionnement : 297 h Scie de tronçonnage DÉTAILS TECHNIQUES Ihedpfx Adsyrmzqekjw Vitesse moteur triphasé : 3 000 tr/min Puissance moteur triphasé : 0,55 kW Diamètre lame : 200 mm Unité de tirage DÉTAILS TECHNIQUES Vitesse de tirage : 20/30/40/50/60 m/min Force de tirage : 11 700 / 7 800 / 5 800 / 4 700 / 3 900 N Longueur de contact : 800 mm Largeur bande max. : 160 mm Hauteur profil max. : 160 mm DÉTAILS DE LA MACHINE Puissance d'entraînement : 2 - 5,6 kW Poids : 800 kg ÉQUIPEMENT Commande électrique et électronique complète avec pupitre de commande à distance Affichage digital de la vitesse Ampèremètre Potentiomètre hélicoïdal 10 positions

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), We offer used and new cantilever racking systems as well as heavy-duty pallet racks. We are happy to prepare a customized quote for you. Please provide us with the following information: - Length and height of the desired racking system, - Number of storage levels, - Load capacity per shelf. If you have any questions, please do not hesitate to contact us. Isdehr D Dtopfx Adkjhw Images are sample photos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 2.500 kg, višina brušenja: 200 mm, The machine is equipped with the following processing units (for further details see attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) - Sanding roller with 85 Shore hardness TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min Ihedpoyub R Eefx Adksw MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversible feed direction: 3 Weight: 2,500 kg EQUIPMENT - Feed table with electric height adjustment - 3 motors: 18.5 kW (25 HP) each, with SD start sanding belt brake - Touchscreen control with color display - Additional extraction connection Note: The machine is supplied without a power cable. The electrical connection must be provided by the customer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, prehod palice: 34 mm, model krmilnika: Fanuc 21T Modell B, Brez minimalne cene - zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Prehod palice: 34 mm Ihedpeyrf Ensfx Adkjw PODROBNOSTI STROJA CNC krmiljenje: Fanuc 21T model B OPREMA CS os levo CS os desno Približno 26 fiksnih nosilcev 2x pogonska nosilca (1x aksialni, 1x radialni) Vpenjalna glava Hainbuch levo in desno Transporter za ostružke Priročniki Opomba: Podajalnik palic ni vključen v ponudbo.

Stanje: rabljeno, Serija več kot 3000 metrov dolgih premičnih skladiščnih regalov. Dolžina: 260 - 360 cm Širina: 80 - 110 cm Višina: 200 - 650 cm Ihodpsuru T Tofx Adksw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Ihedjyrfvgjpfx Adkew Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 207000046, minimalna gramatura papirja: 50 g/m², največja gramatura papirja: 300 g/m², proizvodna zmogljivost: 19.680 enota/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: 143,250 EUR! Ihsdpfoyrd Rcex Adkjw Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 pages/minute Printing speed A3: up to 171 pages/minute Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper Specifications Paper weight range: 50 gsm – 300 gsm Standard paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main Unit Dimensions Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter Readings A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Leto izdelave: 2025, stanje: novo, Packaging line for the production and packaging of wet wipes such as hygiene wipes, cleaning wipes, moist care wipes, and disinfectant wipes. The line consists of a wet wipes manufacturing unit, a flow wrap packaging unit, and a unit for applying the resealable lid. Wet Wipes Production Process: Unwinding of nonwoven material from two mother rolls and longitudinal slitting into five lanes per roll (up to wetting) for high-speed production, folding into Z- or C-shape, wetting via multiple spray nozzles, cross-cutting to cloth length, stacking, and transfer to the packaging unit. The flow wrap packaging unit handles wipe feeding, film feeding and printing (hot-stamp printing), hole punching (for tissue dispensing), placement of the resealable label and, for example, a sealing label (the integrated dual-lane labeller enables staggered labelling), pouch cutting/hot sealing, and transfer to the lid unit. The lid unit is equipped with two lid magazines and one labeller. Lids are glued onto packs using a hot melt process. The liquid supply system for moistening the wipes consists of two tanks with continuously mixing agitators and a liquid recirculation unit. Specifications: - Suitable for dry nonwovens (spunlace) - Fold: Z- or C-fold (changing fold tool required) - Folded area per side adjustable - Folded wipe size: L(120–220) x W(90–110) mm - Unfolded wipe size: L(120–220) x W(150–220) mm - Number of wipes per pack (min. to max.): 30–120 wipes - Wipe grammage: 40–80 g/m² - Machine speed (idle): max. 5,600 wipes/min or up to 60 packs/min - Pouch size: dependent on fold dimensions & number of wipes per pack - Film roll size: max. width 360 mm, diameter max. 400 mm - Suitable films: OPP film (clear, printed or laminated) - Nonwoven mother roll size: width 800–1,320 mm, diameter max. 1,200 mm - Label roll size: width max. 60 mm; diameter max. 300 mm - Lid dimensions: width max. 80 mm, length max. 120 mm Ihjdpfov Nma Djx Adkow - Liquid tank dimensions: 900 x 900 x 1,900 mm - Packaging line dimensions: L 16,273 x W 5,404 x H 2,350 mm - Total weight: approx. 12,000 kg - Power: 27 kW, 380V, 3-phase The photo shows only the main machine (wet wipes production). Images of the packaging and lid sealing unit are available upon request. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – We generally have 30–50 different new machines immediately available from stock. For customer-specific machines, we offer very short lead times, starting from about 3 weeks. – All machines are available with full warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, številka stroja/vozila: 23-07-12-045, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), premer žaginega lista: 550 mm, višina mize: 910 mm, širina reza pri vzporednem vodilu: 1.000 mm, La machine est en très bon état avec très peu de traces d’utilisation ! La machine a été utilisée pour le traitement de l’aluminium. DÉTAILS TECHNIQUES Diamètre maximum de la lame : 550 mm Largeur de coupe avec la butée parallèle CNC : 1 000 mm DÉTAILS DE LA MACHINE Hauteur de la machine : 910 mm Puissance moteur : 7,5 kW Iedpfx Ajytpxnodkjhw ÉQUIPEMENTS Extension de table (longueur : 840 mm) Chariot à double rouleaux (longueur : 3 000 mm) 2 serre-joints pneumatiques à serrage rapide (plage d’utilisation : 0-90 mm) Commande à hauteur des yeux Support gabarit directement sur la commande Hauteur de coupe étendue, inclinaison de la lame comprise TIP-SERVO DRIVE Butée angulaire CNC UNO 90 Glissière transversale supplémentaire incl. connexion Rouleau d’appui avant Table à coussin d’air Dispositif de pulvérisation Remarque : La machine provient d’une liquidation d’entreprise, elle a été démontée et stockée par des professionnels.