Tračna žaga - navpična

MÖSSNER SM/420

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 24459, Funkcionalnost: nepreverjeno, dolžina mize: 600 mm, širina mize: 600 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 04.05.26 in 07.05.26. Gsdpfsyr Nrrjx Agwoip TEHNIČNI PODATKI Dimenzije mize: 600 mm x 600 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 1.000 x 800 x 2.000 mm Teža stroja: 400 kg Zunanja referenca: Lot 76

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the vehicle’s rear tailgate, which enabled the military to transport a truck or other military equipment. The "XV" following LARC indicates the maximum payload capacity: 15 tons. The vehicles are constructed from aluminum and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (US measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins eight-cylinder diesel engines, each producing 300 HP. On land, they could reach a maximum speed of 48 km/h, and in water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight is 35.5 tons. The previous owner intended to convert the boats to fully electric propulsion in order to offer sightseeing tours in the Wadden Sea. Gisdpfx Agsxcgy Hewep Approximately €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Stanje: dober (rabljeno), Kovinska tračna žaga, tračna žaga, vertikalna tračna žaga - Proizvajalec: Mössner Rekord, vertikalna tračna žaga tip SM/420 z varilnikom za tračne žage - Širina reza: maks. 400 mm Gsdpshvtcijfx Agweip - Višina reza: maks. 230 mm - Moč motorja: 1,1/1,7 kW - Napetost: 380 V, 50 Hz, 4,6 / 3,6 A - Tračni list: dolžina 3150 do 3260 mm - Hitrost tračnega lista: nastavljiva - Delovna miza: nagibna v 2 oseh - Varilnik tračnega lista: Ideal BSO - Dimenzije: 940/750/V1850 mm - Teža: 548 kg

Stanje: rabljeno, Leto izdelave: 1977, Roll diameter: 420 mm Throat depth: 410 mm Workpiece height: 265 mm Saw blade width: 3 - 25 mm Cutting speed: 12 - 375 m/min Table size: 600 x 600 mm Total power requirement: 1.7 kW Gisdpfx Aeymqwrsgwep Machine weight: approx. 0.6 t Space requirements: approx. 1.0 x 0.9 x 1.9 m

Stanje: rabljeno, • Hitrost vrtenja (vrt/min): 2500/4500/6000 Godpfxefndive Agweip

Stanje: rabljeno, Vertical Bandsaw MÖSSNER REKORD Type SM 420 Machine No. 17010 Year of manufacture: 1968 Wheel diameter: 420 mm Throat width: 415 mm Maximum workpiece height: 265 mm Table size: 605 x 600 mm Blade speed: 18 - 562 m/min, 8 steps Godpfx Agsdzqc Rowjip Saw blade length min/max: 3150 / 3260 mm Drive power: 1.1 / 1.7 kW Power supply: 380 V 50 Hz - Bandsaw blade speed adjustable via 4 gearbox steps and 2 motor speeds - Saw blade butt-welding device IDEAL BS 0-16 with shear and grinding wheel - Worktable tiltable on 2 axes Space requirement (L x W x H): 950 x 750 x 1900 mm Weight: 570 kg Good condition

Stanje: rabljeno, Leto izdelave: 1969, Funkcionalnost: omejena funkcionalnost, Tračna žaga podjetja Mössner - tip SM 420 Vertikalna tračna žaga MÖSSNER SM 420 A, letnik 1969 Opis: Gjdpfsylkltjx Agwsip - tovarniška številka: 22600-77/14 - s brezstopenjskim podajalnikom - naprava za spajanje traku IDEAL - strojna luč Ogled je možen kadarkoli. Stroj je odklopljen, stoji na paleti in je zavarovan s pritrdilnim pasom, Stroja ni mogoče več zagnati, verjetno manjša napaka. Zasebna prodaja – brez garancije in jamstva.

Stanje: rabljeno, Roll diameter 400 mm Throat depth 385 mm Maximum workpiece height 335 mm Cutting speed 25 - 150 m/min Table clamping surface 595 x 595 mm Saw blade length 3400 x 6-16 x 0.9 mm Working height 1020 mm Voltage 400 V Total power requirement 1.5 kW Gedpoxab A Rjfx Agwsip Machine weight approx. 470 kg Space requirement approx. 950 x 850 x 1920 mm Good / well-maintained condition (!!) Features: - Electrically powered, robust vertical band saw - Infinitely variable saw blade speed * Speed adjustment via handwheel: 25 - 150 m/min - Stepless height adjustment of the blade guide - Stepless adjustment of the saw blade width - Heavy-duty work table - Machine base frame - Control cabinet with main switch

Leto izdelave: 1984, stanje: dober (rabljeno), Der auf dem Tisch rot markierte Teil ist nicht dabei. Gedpfx Aslz Izlegwoip

Stanje: pripravljen za uporabo (rabljen), Mössner Rekord SM / 420 vertikalna tračna žaga za kov Izkoristek: 410 mm Premer koles: 420 mm Največja višina obdelovanca: 265 mm Dolžina žaginega traku: 3160 mm - 3260 mm Delovna višina: 1000 mm 4 prestave menjalnika Prostorske zahteve pribl. 920 mm x 740 mm x 1815 mm (D x Š x V) Teža pribl. 560 kg Varilni aparat za trak: Ideal Gedpfjyh Uyqsx Agwoip Vabimo vas na ogled stroja. Po želji lahko organiziramo ugoden transport! Prejmete urejen račun. Za tuje stranke lahko izdamo neto račun pod pogojem veljavne ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možne so razlike v tehničnih podatkih ali napake v opisu izdelka; pridržujemo si pravico do sprememb.

Stanje: dober (rabljeno), Shielded gas welding machine, shielded gas welding unit, arc welding system, MIG/MAG welding system Gedpfx Agjwl Dptjwjip - Max. welding power: 400 A - Wire feed: 4-roll drive - Design: Water-cooled - Accessories: includes ground cable, detachable wire feeder, gas regulator, 4 m hose package - Quantity: 1 unit available - Dimensions: 500/1010/H1600 mm - Weight: 162 kg

Stanje: rabljeno, Leto izdelave: 1973, Kovinska tračna žaga MÖSSNER Rekord SM/420, št. 20677, letnik 1973, z napravo za spajanje tračnega rezila IDEAL BSS 016 Gjdpfxjyhqtce Agwjip

Stanje: rabljeno, Premer valja 420 mm Izsev 410 mm Dolžina tračnega lista 3150 - 3260 mm Širina tračnega lista 3-16 mm Gisdpfx Ajyclyaogwsp Teža cca 600 kg Z IDEAL spajkalnim strojem BSO-16 Na voljo navodila za uporabo

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Gijdpfx Asg U Uv Rogwsp Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 1988, Roller diameter 420 mm Throat depth 410 mm Workpiece height 295 mm Cutting speed 12 - 375 m/min Table clamping surface 600 x 600 mm Saw band length 3150-3260 // 3-16 mm Working height 1020 mm Voltage 380 V Total power requirement 1.1 / 1.7 kW Machine weight approx. 620 kg Space requirement approx. 1000 x 800 x 1900 mm from a maintenance workshop – good condition (!!) - checked condition – machine video - Gsdpfx Agsxaa Avswjip ?v=UVpE_bLGHa0 Equipment: - IDEAL BSO / 16 butt welding unit with shear and grinding stone - 4 gearbox speeds + 2 motor speeds - Band guide height adjustment with hand wheel - Work table tiltable +/-45° - Work table inclinable 10° - Machine base