Talni vrtalnik MK3

Möller MOE 1132

Stanje: pripravljen za uporabo (rabljen), The system includes: (1) Two-cylinder engine HERFORD 2H 280, rated power: 150 HP, speed: 400 rpm, electrical/thermal output: 83/140 kWh, with generator MARELLI MJB 250 LE4; (2) Three-cylinder engine HERFORD 3H 280, rated power: 225 HP, speed: 400 rpm, electrical/thermal output: 125/212 kWh, with generator MARELLI MJB 250 MA4. Ppjdpfegg Stfjx Aczel

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Podsfrvzvjpfx Aczspl Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Pjdpfx Acod Sitkozepl Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: dober (rabljeno), Leto izdelave: 1984, Offer 24126 Motorized Solid Bar Twisting Machine + Ring and Arc Bending Machine Technical Data: - Bending operation motorized, with automatic or manual mode - Bending capacity, square steel ST 37 up to approx. 30 mm - Bending capacity, flat steel ST 37 up to approx. 30 x 8 mm - Adjustable bending length between twisting units up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Preselection for bending time / bending length – twisting length - Right and left-hand operation - Tailstock - Arc and ring bending attachment GRB 66 with various roller sets - Bending capacity – flat steel 60x10 mm vertical R 700 mm - Flat steel 70x12 mm horizontal R 500 mm - Round pipe 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Roller sets for round steel pipe 1 ¼", plastic 1 ½" - Standard roller set Psdpfx Aor Ik N Doczopl - Space requirements approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Ppodpsgulr Hjfx Aczjl Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) Ppedpfx Acod Iin Tjzel • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!

Stanje: novo, Column Drilling Machine Brand: ALZMETALL Model: AX 3 iTRONIC-V Year of Manufacture: 2023 Condition: New machine Speed range: 80 – 1,125 rpm Standard features: - 7” TFT LCD display with touch function: Manual input of spindle speed setpoint, Display of actual spindle speed, Integrated drilling depth indicator with touch zero point adoption, Virtual drilling depth scale on the display, Machine status and warning messages shown on display, service information, Selectable user languages: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display - Three separate buttons for clockwise – counterclockwise – stop - Clockwise and counterclockwise rotation via contactor control - Automatic drill feed with feed overload protection - Spindle guard - Operating manual Other important technical data: Pjdpfx Acjh I N Trszjpl - Drilling capacity in ST 60: 40 mm - Quill stroke: 120 mm - Spindle taper: MK 3 - Column diameter: 115 mm - Feed: 0.1 + 0.2 mm/rev - Motor power: 1.45 / 1.9 kW - Table dimensions: 515 x 360 mm With the following options: - LED machine lamp - Foot switch, supplementary to tapping device - Technology calculator in the display - Fine drill depth adjustment and fixed stop

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel Pedpfx Aelgvkioczopl - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Psdpfx Ajqhkuksczspl Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Ppodpjhp Rdlefx Aczjl Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -