L&M H900 + posoda - komplet

Ludden & Mennekes H900

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno),

Stanje: rabljeno, največja dovoljena obremenitev: 29.304 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, skupna širina: 2.354 mm, skupna višina: 2.995 mm, Oprema: ABS, Schmitz SKI 24 SL 7.2 Insulated Steel Tipper Body 24.6 m³, Lift Axle !!!FOR RENT!!! Lrjdpfx Abjtx N H Nebog * German vehicle * Like new condition * Insulated tipper body 26.4 m³ * Hinged rear tailgate * SCB axles * Hubodometer * Folding underrun protection * Sliding tarpaulin cover * Lift axle * Air suspension * Pneumatic controls * Disc brakes * Load pressure gauge * Automatic lowering during tipping operation * ISO air connections with red and yellow coupling heads * 2 x 7-pin power connections * 15-pin power connection * ABS connection * Platform on the front wall Subject to prior sale and errors excepted! We look forward to your call.

Leto izdelave: 2009, Stanje: skoraj kot novo (rabljeno), Presa cu container Lodpfxofhb Tio Abbjrg Motor 5,5 kW 400 V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical data for the document shredding plant: Manufacturer: HSM GmbH + Co KG General data for the two-stage shredder system: Model: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 h Throughput: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 – 53 mm Fuse: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Cutting width: 500 mm Particle size: 20 x 155 mm (W x L) Rated power (pre-shredder): 2 x 5.5 kW Rated current (pre-shredder): 2 x 11.5 A Secondary shredder data: Shredder type: P 500.2 Cutting width: 500 mm Particle size: 6 x 40 – 53 mm (W x L) Rated power (secondary shredder): 9.2 kW Rated current (secondary shredder): 18 A Security level according to DIN 66399: P-3, O-2, T-3, E-2 Baler data: Type: KP 100.1 Year of manufacture: 2015 Operating hours: 2,377 h Pressing force: 9 – 12 t Bale weight: 40 – 150 kg/bale, depending on material Cycle time: 7 – 16 sec Feed opening: 450 x 580 mm Bale size: 630 x 500 x 400–1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3,990 x 2,225 x 1,735 mm (L x W x H) Baler weight: approx. 1,000 kg Total system dimensions (conveyor, shredder, and baler): 9,560 x 2,071 x 3,550 mm (L x W x H) Function description: Lredpfxswrybrs Abbog This is a complete plant consisting of a feed conveyor, a two-stage shredder system, and a horizontal baler. Material is fed via the conveyor, shredded in two steps, and subsequently compressed into stackable bales. A second cutting unit and various motors are available as spare parts. Remarks: The complete documentation (operating manual, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical details or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 2.632 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29.381, stiskalna sila: 35 t, širina odprtine za polnjenje: 620 mm, dolžina polnilne odprtine: 1.000 mm, skupna širina: 2.380 mm, skupna višina: 2.500 mm, skupna dolžina: 6.625 mm, Vključno z dovodnim trakom. Stroj je takoj pripravljen za uporabo. Ljdpfevaw T Asx Abborg

Stanje: novo, - Motor power: 9 kW Ljdpfxjgl Ac Sj Abberg - Control: PLC-based, two-hand safety control - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - max. blade length L = 2000 mm - max. opening H = 1200 mm - Machine weight: approx. 4 tons - Paint finish: RAL 5012 - light blue - Hand guard grille in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Machine in stock, available immediately Price and further information on request

Stanje: rabljeno, Leto izdelave: 2017, Shredder Weima tipa HWN-2-1000 za drobljenje lesa in podobnih materialov, kot so plastika ali karton. Stroj izstopa z robustno konstrukcijo, velikim lijakom za dovajanje materiala in dvema zmogljivima rotorjema za kontinuiran vnos materiala. Po želji z novimi noži za doplačilo. Premer rotorja: cca 354 mm Dolžina rotorja: 1.000 mm Število nožev: 2 x 72 Pogon: 2 x 18,5 kW Dimenzije: 2,4 x 2 x 2 m Lrsdpfx Abjxvzzxobsg Velikost sita: 10 mm

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 12.078 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 30.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 98 kW (133,24 KM), volumenski pretok: 643 m³/h, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of manufacture: 2012 Total operating hours: 12,078 hours (as of September 2025) Pump operating hours: 6,616 hours (effective pump runtime) Number of bales pressed: 65,792 bales (as of September 2025) Main press force: 880 kN Specific pressure: 120 N/cm² Cutter edge pressure relief force: 120 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idling): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 98 kW Total current consumption: 192 A Fuse protection: 250 A slow-acting Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/h Bulk density of 50 kg/m³: 32.15 t/h Bale weights at approx. 1.2 m bale length: 650 up to 750 kg per bale, material dependent Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor): 18,000 x 22,000 x 5,765 mm (L x W x H) Lrsdoxcngnepfx Abbjg Press weight approx. 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: - Access lock with key transfer system - Electro-hydraulic interlock of the press carriage during tying operation, to prevent press ram movement with highly expansive materials Additionally ordered special equipment: - Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motorization, at equivalent output - Manual activation/deactivation of the number of tying wires, to save strapping wire with non-expansive materials - Cutter edge relief with 121 kN press force - Wire monitoring by sensors, including press shutdown in the event of wire break or end of wire - Bale slide - Visual warning signal mounted on the control cabinet Condition of the press: The complete baling system (baler and conveyor system) is in good, ready-to-use condition. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2012 Drive power: 7.5 kW Conveyor speed: 0.05 – 0.4 m/sec Feeder belt length: 6,000 mm Feeder belt side wall height: 400 mm Incline belt length: 9,000 mm Incline belt side wall height: 800 mm Gooseneck length: 1,500 mm Incline: 30° Nominal belt width: 1,800 mm Usable belt width: 1,700 mm Belt quality: EP-500/4 Steel cleats on rubber belt: 50 x 50 mm Hollow pin chain, pitch: 125 mm, rollers: 36 mm Drive shaft height above ground: 4,284 mm Total conveyor height: 5,765 mm Transport dimensions feeder belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport dimensions incline belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit dimensions for conveyor: 14,765 x 3,260 x 1,250 (L x W x H) Scope of delivery: For sale: the feed conveyor, the baler with bale slide, and the wire feed stations, but without wire. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection possible by prior arrangement. We assume no liability for technical data or possible errors.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 24559, stiskalna sila: 34 t, skupna širina: 2.400 mm, skupna dolžina: 6.500 mm, skupna višina: 2.400 mm, skupna masa: 4.635 kg, dolžina polnilne odprtine: 1.000 mm, širina odprtine za polnjenje: 1.900 mm, moč: 5,5 kW (7,48 KM), Neat compactor Ljdewcdrcopfx Abberg Husmann SPB20SEN Lifting and tipping device for 660-liter wheelie bins Elevated lifting and tipping device for a platform at a height of 1,200 mm Discharge flap

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 80 mm, širina izdelka (min.): 105 mm, največja širina izdelka: 420 mm, višina izdelka (min.): 6 mm, največja dolžina izdelka: 720 mm, dolžina izdelka (min.): 170 mm, New main computer (IPC) was installed in 2022. Provision: Machine can be loaded for an additional charge of €1,500! Lrjdowbtmgspfx Abbog TECHNICAL DETAILS Cycle rate: 60 covers / min Setup time: approx. 5 min Processable Formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Application: Processing of hardcovers, book cases, and 3-piece covers EQUIPMENT - Feeder for flexible spines (Soft Spine Feeder)