Dvosmerni čistilni brusilnik

Lower DSM 2000

Stanje: novo, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single-piece wood sanding machine with additional cross brushing sanding unit (discs) and longitudinal brushing sanding unit (roller) for sanding solid wood such as window profiles, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET shoe for pre-sanding 2. Disc unit for cross-grain sanding / defibering 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing aggregates above and below - Direct-drive rubber-coated sanding rollers for slip-free power transmission - Combined sanding via roller and shoe for heavy material removal with consistently flat engagement zone - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of sanding zones for cooler sanding and longer belt service life - Forced pneumatic oscillation control for sanding belts - Effective dust extraction directly at the sanding rollers - Fine dust extraction at tensioning rollers - Integrated brushing sanding device (cross and longitudinal) with dust extraction - Motorized sanding thickness adjustment via precision lead screws and oversized linear ball bearing assemblies on hardened and ground precision shafts with dust and dirt protection - Material removal setting on the bottom via precision lead screw with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Belt exchange with pneumatic belt release within seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for overthick workpieces - Workpiece transport on calibrated, slip-resistant, high-friction conveyor belts over heavy-duty 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport Gsdpfsyrty Hsx Ad Aoip - Feed gear motor infinitely variable for quick adaptation to different types of wood - All motors electrically protected - Ergonomically arranged controls at the infeed side - Digital thickness display (resolution 0.1 mm) utilizing advanced magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units: Disc, max. diameter: 200 mm Roller, max. diameter: 270 mm - Extraction ports: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm Dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air blow-off - medium...

Stanje: novo, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 2–180 mm LÖWER double-sided sanding machine DSM 2000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal. - Offset sanding and finishing units located above and below - Direct drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large-capacity dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety device via contact roller in case of oversized workpieces - Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and consistent workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the workpiece infeed side - Automatic workpiece thickness detection (no prior measurement necessary) - Digital thickness display (resolution 0.1 mm) using modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm Giedpfx Asvu Hdtjd Aop - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE compliant ----- Base price of the machine on request! ----- Optional accessories for additional cost: Infinitely variable feed 4–20 m/min for speed adjustment to ...